Video chapter markers not showing in iTunes

I used Metadata Hootenanny to add chapter markers in a movie.
When I play the movie through Quicktime it shows the pop-up chapter selector, but when i import the movie into iTunes and play it through iTunes, the controls don't show the chapter markers.
I've seen the chapter markers working fine in iTunes for movies purchased in the iTunes Store.
What am I doing wrong?
MacBook Mac OS X (10.4.10)

You need to toggle on "show overlays" in the canvas and/or viewer display.
You access it via the rightmost icon of the three above the canvas display or from the VIEW menu or with SHIFTOPTIONW
x

Similar Messages

FCP video chapter markers not accepted by DVD SPro

When I had FCP chapter markers in the timeline and then used compressor, they appeared in DVD Studio Pro. But in realizing that I couldn't cut out any footage in FCP without ruining all of the markers I had made following that point in the timeline it was suggested that I add chapter markers onto the video itself. The markers were no longer visible as windows in the Canvas, we got them to appear in the Viewer (view-playhead sync-open). BUT... Now, these markers attached to the video (and not the Time line) appear to not be working when I open a compressed sequence in DVD Studio Pro. How can this delemna be solved?

Ok, so if this is true (about "Chapter Markers set in FCP to work in DVD-SP, they HAVE to be set to the Timeline"), does it not seem a little silly for FCP (using latest Studio updates etc) to give people the option of utilizing "chapter" markers set to the video if they don't actually work?
By the way I'm using all of the latest FCS updates and exported using File: Export: Using compressor and then opening up DVD SP and importing assets etc.
Could there not be an easier way rather than having to wait until the VERY end of the editing process to add Chapter markers to the Timeline because otherwise they get all wacked out of sink if you cut out or add any video/audio?

Solution to chapter markers not showing up in iDVD

I've been having a problem with my chapter markers from FCE not transferring properly in iDVD06. I'd export a QT movie from FCE HD, the chapters would show up fine if I opened the file in QT, but placing the movie in iDVD would bring in the movie sans chapters.
I've been using the "all markers" option in FCE's export window, but today I discovered that I needed to select "chapter markers" instead. When I choose the "Chapter Marker" option, everything imports fine into iDVD.
I haven't tried using markers otherthan chapter markers along with chapter markers, thus I don't know if the "all markers" option would work if I had additonal types of markers present.

You need to toggle on "show overlays" in the canvas and/or viewer display.
You access it via the rightmost icon of the three above the canvas display or from the VIEW menu or with SHIFTOPTIONW
x

Premiere CC Chapter markers not frame accurate in Encore CS6

So I just made a video with 30 chapter markers at distinct cuts in the timeline using Premiere CC and exported that to an MPEG-2 video as I would in CS6. After importing the MPEG-2 file into Encore CS6 and making a New Timeline the Chapter Markers do show up but they are now all 3-15 frames early per chapter which also means none of the chapter thumbnails are going to be accurate. It's easy to check this with both programs just compare the timecode number at each chapter point in the timeline of Premiere CC then Encore CS6.
Also noticed that the Add Chapter Marker tool that was in the Premiere CS6 timeline is missing in CC, just the Add Marker tool is there now. Couldn't find a way to add the Add Chapter Marker tool to the timeline group of tools.

The .xmpses file contains the chapter information, at least for CS6 and earlier. You can test this by removing that file before importing into Encore. You won't get any chapters.
Not sure where Adobe is putting chapter data for CC, but it must be somewhere because the chapters are there.
So I ran two tests, one from CS6 and one from CC7. In both cases I added three chapter marks, two where I knew there would not be an I-frame in the exported .m2v, and one where there would be. Both exports came into Encore with the chapter makers right where I put them, which surprises me because there were no I-frames at two of those points and Encore did not 'legalize' them as I'm accustomed to with my production machine. (Ran this test on my personal machine.) I could move the markers off those points, but could not put them back because, like I said, the DVD spec only allows them on I-frames.
I did not burn to test whether or not Encore would move the chapters that weren't on I-frames. I'd be confused if it didn't, though.

Ipod does not show in itunes and is recognised as a removalble disk by comp

ok so ive had my ipod since just before last christmas and it has perfectly until now. it is a 30 gig i pod video and this is the problem: when i connect it to my computer it says do not disconnect on the screen as usual and u hear that "blunk" sound to recognise that it is properly connected however it will not show in itunes in any way anymore(it does not bring it up after it is connected and when i connect it and even open i tunes it doesnt show on the left hand selection bar beside library and podcast ect.) and when i looked on my computer it says Removable Disk(I:) but is not recognised as my ipod
plz plz help me!!!!!
windows XP Windows XP
windows XP Windows XP

also for sum reason my comp wont let me dowload an ipod updater so im stil at 1.1 and the same thing with itunes

Ipod not showing in Itunes and Windows 7

The Fix
I uninstalled everything that was Apple related and reinstalled Itunes with no loss to my data.
Once reinstalled, both the ipod is now showing in itunes and everything is working fine now.
I hope this helps anyone else out with the same problem of an ipod not charging, not showing in Windows 7 and not showing in itunes.

Glad that it works but if you read the threads, usually that is tried and suggested/recommended, of course, but fails to solve the problems.
Also, Devices and Printers is a good place to start and look there to even see if Widnows detects iPod but also has an error exclamation and "error."
I'll say this, Apple Safari and iTunes and iPod support software, can be the most buggy sofware I use on Windows with more problems and issues. Shame.
Tried to or accidently pluged iPod Touch 4G into one of my other PCs and had issue when I brought it back over. Use of inferior quality 3rd party cable might also be blamed.
iTunes video playback, movies and music video, would hang, freeze, go into a "wait chain" (better with Windows 8 Dev Preview, but that is PRE-BETA!).
Apple Common Support Software issues, which 2.0 version can be a problem. Used by iTunes and Safari. Seems like iTunes was better before installing Safari. Two PCs and they are almost 200% identical as can be, but Safari would hang.
May need to remove Apple folders in AppData (move to safe place) if there is a problem there.

I have transferred my music to new computer but music is not showing in iTunes - although is on the computer as if I select a song from the folder it will play that song via iTunes. How can I get my music to show?

I have transferred my music to a new computer following the instructions carefully but for whatever reason the music does not show on iTunes on the new computer. The music is there as I can access it via My Computer and if I select a song it will show in iTunes and play - however I can not do this for every single track! Can anyone suggest something I have done wrong????

Media was moved via external hard disk, and I think I moved the iTunes Media folder after consolidating it.

Ipad 2 does not show in itunes

My ipad 2 was completely dead last night so I plugged it in to charge using the 10W wall charger that came with it and noticed that it did not vibrate when I plugged it in nor did it show the lightning bolt showing it was charging. I left it alone from a few hours and when I checked, it was up to 12%. Normally a few hours will almost fully charge it. I swapped out a few different cables, chargers, and even plugged it into my mac USB, and none of them vibrated and showed the lightning bolt. When I plug it into my Mac, it does not show in iTunes at all under devices. I plugged in my iPhone and iPod and both showed instantly. I decided to leave the paid charge overnight on the wall charger to see what would happen.
This morning it was up to 53%. I updated the iPad 2 software to iOS 5.1.1, updated iTunes to 10.6.1, updated all software on my Mac (I have OS X 10.6.8) and still doesnt show in iTunes and none of the chargers or cables make it vibrate when plugged in and none show the charging bolt. I deleted iTunes and the Apple Mobile Device driver and then reinstalled thinking perhaps the mobile device driver was messed up - didnt help.
On the iPad 2, I went to settings/general/reset/reset network settings - no help.
Of course, throughout this I have reset my Mac several times, reset the iPad both by sliding the bar to shut down and by holding down the reset button & home button at the same time until the Apple logo appears, and as stated above tried several wall chargers and USB cables that works on my other i products. So I do not think its something obvious like that.
Any help is greatly appreciated.
iPad 2, iOS 5.1.1
Mac OS X 10.6.8
ITunes 10.6.1

Let me know when you figure this out. I am experiencing the exact same situation. Just started this morning after I switched my mobileme account to icloud. I can see my iphone in itunes, but when I plug my ipad in, nothing. Not on any computer. I have always been able to sync and charge with no trouble. Now my ipad is slowly turning in to a door stop.
Help!
Thank you!

My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.

My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.

Did you try here:
iOS: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Next try on another computer to help determine if you have an iPod or computer problem.

Ipod Nano not showing in Itunes or Windows

hi,
when i connect my ipod to my computer it charges but does not show under itunes or in windows. i've tried all the Rs except one...restore. and the only reason i haven't tried restore is because i can't access my ipod under itunes to run the restore! someone pls help if u can...i'm just about ready to smash the thing!i've spent hours these past two weeks trying to get it to open under itunes with no luck. sometimes it pops up as a "new device that is not working properly", but then it just disappears again and i can't find it under my devices!! somebody, anybody, pls help!
2nd Gen ipod nano Windows XP
Windows XP
Windows XP

I have a simelar problem. My wife had an ipod mini which was synced to itunes, I brought her a 4GB ipod nano yesterday and I told her just plug it into the computer and then it will have auto instructions.
Actually what happens is nothing, I plug it in and it charges, nothing else. I have uninstalled itunes and downloaded it again but it still has my mums ipod mini songs on there.
basically the ipod does not seem to sync with itunes...any help will be appriciated.
Matthew

On an iPod Nano 2G, the iPod will not show in iTunes

Using an iPod Nano 2 G, when I plug it into a Mac, the iPod will not show in iTunes. The iPod will charge, but will not sync. This happens across multiple Mac's, so the issue seems to be the Nano, not the computer(s). The iPod will actually show for about 2 seconds in the left sidebar, then it disappears. Any suggestions about how to either fix this, or maybe how to restore the iPod's software. The iPod otherwise seems to be working correctly, i.e. will play music, etc. we have tried switching ports, cables and computers, same results.

Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Do other USB devices work on the computer/USB port??

Ipod Nano icon not showing in itunes and I've tried everything suggested

My ipod nano is not showing in itunes and I've tried everything that has been suggested by Apple. I updated iTunes, I've reset the ipod. I just want to download my songs! Help! Please and Thank you.

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

My ipod touch 2nd generation is not showing in itunes

My ipod touch is not showing on itunes library. What can I do?

See:
iOS: Device not recognized in iTunes for Windows
Start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Next see if this helps determine cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if you have an iPod or computer problem

Device Show in My Computer But Not Show in itunes

My iPod Shuffle Disconnect During The Restore Process And Now Device Show in My Computer But Not Show in itunes.Please Help Me.to Solve This problem>

Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
To get all your content off your connect your iPad to your new computer.
Then use a 3rd party piece of software to transfer your content
I have found Senuti useful but there are others listed in the article I linked to in a previous post.
https://discussions.apple.com/docs/DOC-3991
That will let you transfer your non purchased content
For Purchased content log in to iTunes on the new computer
In Itunes Store click on Purchased under the Quick Links section on the right.
Download any music by clicking on the cloud button

Video chapter markers not showing in iTunes

Similar Messages

Maybe you are looking for