Video chat from Mac iChat to PC AOL 9

Hi!
Can I use iChat on my MacBook (new 10/2008) to start a live video IM conversation with a PC buddy using AOL 9.0 (NOT AIM, but the IM built into the AOL application)? We both have AOL screennames. Have you tried this?
http://help.aol.com/help/search.do?cmd=displayKC&docType=kc&externalId=http--hel pchannelsaolcom-kjumpadparticleId217194&sliceId=&dialogID=103976905&stateId=1%20 0%20104016211
Thanks!
Davie

Can only find this http://www.andreaslinde.com/archives/2004/10/23/video-conference-ichat-aolaim/

Similar Messages

  • How to video chat from a macbook using ichat and an iPad 2 using facetime

    How do I set up to do a video chat from a macbook with ichat and lion to an ipad 2 with facetime

    You can't -  but you can use FaceTime on the iPad and FaceTime on the Mac running Lion.

  • Video chat from older macbook pro (ichat) to new macbook pro

    How can I video chat from an older macbook pro (2011) to a new macbook pro with retina second gen

    You can't -  but you can use FaceTime on the iPad and FaceTime on the Mac running Lion.

  • Trouble video chatting from iChat to AIM (PC)

    i just recently purchased a MacBook Pro. kinda new to the OS. but ive downloaded aim as well as tried using ichat to video chat with someone on aim who has a PC. and when i send the request and they try to accept an error msg. and when they request they get an error also. any help greatly appreciated.

    Hi,
    This Users Tip was written some time ago but does contain transferable info.
    Basically the AIM end has to be allowed through the Windows Firewall as an Exception.
    The Ports AIM on a PC uses also have to be allowed by some method in the routing device at that end.
    It does pay to try and use UPnP as the method to allow ports at Both ends.
    Trillian Pro mentioned in the Users Tip is another App that can Video to iChat.
    The Pro Bit is a Add-on needed to do Video and Audio Chat and is the bit that costs.
    Again as a NON Microsoft app it has to be allowed through the Firewall as an Exception.
    At your end go to the iChat Menu > Preferences > Video Section and set the Bandwidth Limit to 500kbps
    This is more than enough for a 4 way Video chat between Macs but may help the PC end.
    9:43 PM      Monday; October 31, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT1771 why did apple erase ichat? its so much better than messages and now I cant video chat with my ichat buddies

    why did apple erase ichat? its so much better than messages and now I cant video chat with my ichat buddies!!!

    HI,
    Apple did not erase iChat.
    Messages in Mountain Lion is iChat +
    The plus bit is the fact you can iMessage iOS devices.
    All the other features that were in iChat are still there.
    If you upgraded Lion to get to Mountain Lion then in System Preferences > Mail, Contacts and Calendars you probably list all the iChat Accounts (Screen Names and IDs).
    You may need to enable them for Messages.
    They should also show up in Messages Menu > Preference > Accounts
    Once those accounts (AIM and Jabber) are Enabled they can be viewed in a Combined Buddy List
    Windows Menu > Buddies (Or using CMD + 1 Keystrokes)
    In the General Section of the Preferences you can Unlink these Buddy lists.
    The Green icons or highlight a Buddy and then using the Buddies Menu or the icons at the Bottom of the Buddy list can be used the same way to start Video or Audio Only chats.
    The iMessage "Account" is only for texting iOS devices or other people using their Apple ID on a Mac in Messages.
    It is an account "in addition to" rather than "taking over from" the services that iChat can join.
    9:22 PM      Thursday; December 6, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I can't use my facebook video chat in mac osx, i can't use my facebook video chat in mac osx

    hey i cant use my face book video chat on mac osx how to fix the prob !!!

    To manage photos, you can start with Settings > General > Usage > Photos & Camera.  That should itemize a bit better where the photos are that take the space.  Camera Roll is local to your iPhone, so if you delete photos from there, expect them to be deleted everywhere.  Other accounts may be saved other places in addition to your iPhone, and may be safer to delete.  It just depends on your personal setup - what accounts you use and where they are stored in addition to your iPhone.
    Another thought is possibly these other accounts can stay where they are on other devices (your PC, for example), and simply stop syncing them to your iPhone.  You can set all that up pretty simply in iTunes on your computer when your iPhone is connected -- simply choose the Photos tab in the iPhone's area and change the sync rule.

  • Video Chat from my PlayBook to Z10

    Hi,
    I have a Playbook and a Z10, both of which are on separate BBID's. Till about 2-3 months back, I was able to video chat from my Playbook  to my Z10. However, I am not able to do that now and I get the message 'COntact's unavailable'. But, I can still do a video chat from my Z10 to the Playbook using the notifications. This is only happening with my Z10. My brother also has a Z10 and I am able to call him from my Playbook.
    Can you help resolve this
    Thanks

    Dear kulpreet
    I know that you have been waiting an exceedingly long time for a reply.
    Today I made my first attempt to use the video chat application for my BlackBerry PlayBook, only just minutes before this post.
    If you are still unable to receive your video chat between you and your loved one, I suggest that you add details to both your phone and PlayBook again.
    I have just experimented with my phone and PlayBook, at that using my phone as a hospital for my PlayBook, I was still able to get a connection between the two.
    My playbook did complete the connection but when I replied from phone to playbook, playbook did not seem to connect.
    Maybe due to having the same connector had to do with it, but it did attempt.
    I believe the connection is made through your BB10 via your BBM.
    I hope this will help you and others in the near future.
    Yours sincerely 
    JT Valerie 
    JTValerie

  • Yahoo/google video chat from mobile

    Can anyone suggest app from which I can do video chat from mobile using 2G network of yahoo/gtalk ?
    LEARNING AND WISDOM ARE SUPERFLUITIES, THE SURFACE GLITTER MERELY, BUT IT IS THE HEART THAT IS THE SEAT OF ALL POWER . . . .

    sorry there are no application available for nokia which will enable video calling on yahoo/Gtalk. And 2G network are not capable of handling video calling. However there is a application Fring http://m.fring.com you could be able to make fring to fring video call, but u must need to use 3G or WiFi

  • Can't initiate a video conference from Mac to PC wtih iChat and AIM

    I am using iChat on an iMac intel core duo and trying to video chat with my dad on a PC laptop using AIM 5.9. We can both invite the other to video chat, however when either one click to accept various things keep us from initiating the chat. One message we get says a firewall may be the problem. My firewall is turned off. He is running Norton. But we tried with that firewall turned off as well as the windows firewall tirned off. At the moment we are on the same network connected via a 2wire router (Myself wirelessly and he via ehternet). I have tried various settings with the router firewall including setting the PC to DMZ and the Mac to the settings specified on portforwarding.com.
    When I initiate the conversation from the Mac he gets a brief flicker like the video window is opening and then it closes; meanwhile my computer says waiting for response until it gives up. When he initiates the video chat and I accept I get the message that the chat failed because I did not respond even thougth I clicked accept. He gets a mesage that the chat failed and the reason may be a firewall.
    Any ideas on how to get this to work so that we are able to video chat. Also he will be returning home in a few days and using a linksys router.
    Any help or ideas to try would be great

    Dear Ralph,
    Sorry for the confusion, I did assume you were an Apple empoyee. Your knowledge about iChat is stunning. I appreciate your effort to help users by sharing your knowledge with such dedication. I do apologise.
    Regarding:
    Port forwarding is being automated and static ip addresses will be generated automatically.
    Let's call it redirection (the handshake indicates the port to forward to).
    When you have NAT running in your home you have the entire Internet available to all your machines. What if you have a machine behind the NAT gateway that needs to be accessed from outside? This is where redirection comes in. Redirection allows incoming traffic to be sent to a machine behind the NAT gateway.
    An example:
    rdr on tl0 proto tcp from any to any port 80 -> 192.168.1.20
    This line redirects TCP port 80 (web server) traffic to a machine inside the network at 192.168.1.20. So, even though 192.168.1.20 is behind your gateway and inside your network, the outside world can access it.
    The from any to any part of the above rdr line can be quite useful. If you know what addresses or subnets are supposed to have access to the web server at port 80, you can restrict them here:
    rdr on tl0 proto tcp from 27.146.49.0/24 to any port 80 -> \
    192.168.1.20
    This will redirect only the specified subnet. Note this implies you can redirect different incoming hosts to different machines behind the gateway. This can be quite useful. For example, you could have users at remote sites access their own desktop computers using the same port and IP address on the gateway as long as you know the IP address they will be connecting from:
    rdr on tl0 proto tcp from 27.146.49.14 to any port 80 -> \
    192.168.1.20
    rdr on tl0 proto tcp from 16.114.4.89 to any port 80 -> \
    192.168.1.22
    rdr on tl0 proto tcp from 24.2.74.178 to any port 80 -> \
    192.168.1.23
    A range of ports can also be redirected within the same rule:
    rdr on tl0 proto tcp from any to any port 5000:5500 -> \
    192.168.1.20
    rdr on tl0 proto tcp from any to any port 5000:5500 -> \
    192.168.1.20 port 6000
    rdr on tl0 proto tcp from any to any port 5000:5500 -> \
    192.168.1.20 port 7000:*
    These examples show ports 5000 to 5500 inclusive being redirected to 192.168.1.20. In rule #1, port 5000 is redirected to 5000, 5001 to 5001, etc. In rule #2, the entire port range is redirected to port 6000. And in rule #3, port 5000 is redirected to 7000, 5001 to 7001, etc.
    Static ip addresses are necissary to ensure that the router does not hand out the same ip twice, hence my question about the data transferred when a user connects his new mac to the one wich was set previously by the user (or other user). I think this information is explained in the Network Traffic Analysis you direct iChat to when they are asked to port forward (manually). I do not know the url by heart but it should be a known link to you.
    Regarding auto response:
    Sometimes you have to consider whether a very direct (and unelegant) interveniance in the software outweights the malfunction of an application that is causing a lot of trouble and inconvinience to Mac users. Personally I think that in this case the risk of being disturbed (still the same as anyone who askes for attention using chat or even phone) outweighs the much more irritating and incomprehensible "user did not respond" message and thus not being able to use one of the main features promised and promoted by Apple.
    Yes life is inconsistent,
    at least life is not sold to you.
    Regards,
    JPM

  • Video Chat from iPhone 4 to mac/PC, preferably for free?

    Title says it all. I have an iPhone 4, I want to be able to 2-way video chat with my girlfriend using her macbook with built in isight. Is there an app or set of apps with this functionality? Is it free?

    ceruleance wrote:
    Title says it all. I have an iPhone 4, I want to be able to 2-way video chat with my girlfriend using her macbook with built in isight. Is there an app or set of apps with this functionality? Is it free?
    Welcome to Discussions, ceruleance
    For benefit of other readers: http://www.apple.com/mac/facetime/
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • Video chat trouble in Ichat

    Dear all,
    I am new to mac. I am using ichat for video and calling features. Ichat work fine with simple messaging options. But I cannot see any video or calling icons in front of buddies.. One of my friend who was on gtalk tried to call me. He was not able to call me because of the software i.e. iChat that I am using instead of gtalk. But I guess I should be able to call even if i am using iChat. I donot know how to solve the problem. Any help and suggestions would be highly appreciated. Thanks!!!

    Hi,
    All the major Services for IM apps  (Which of course now include some form of Video and/or Audio Chat function) use different protocols from each other.
    Google run GoogleTalk as a service and the basic server behind this is  a Jabber one.
    This means you can connect to it using a Jabber capable app (of which ichat is one)
    There other Mac apps that will do this (The Login and text chat part), namely ProteusX, Adium and Psi in addition to iChat.  (These three apps though don't do Video in Jabber (or other services)
    Jabber apps on the whole though use a Protocol to connect for Audio or Video Chat called Jingle.
    Google's version of this is not actually that compatible with other Jabber apps on PCs.
    However Jingle is written into the Browser Plug-in (Intel only) you can get from Google to Chat in a Browser using Video and Audio.
    iChat uses process called SIP (Session Initiation Protocol) to connect for Video Chats.
    It will work iChat to iChat and  from iChat to AIM  or Trillian Pro on a PC  (you tend to be stuck using AIM valid names)
    So...
    iChat to GoogleTalk app on a PC (There is a standalone App) will not work for Audio or Video
    iChat to  Web Browser, Mac or PC, will not work as above.
    Realistically it is simplest if you download the Intel Only Plug-in for your Browser and Chat from the GoogleMail web page or your iGoogle page.
    (Or swap them to the AIM App on PCs -- the Google Web Browser chat may still be easier to set up)
    By Inference the Yahoo option in iChat 6 will also only Video or Audio Chat to other iChat users
    7:39 PM      Tuesday; September 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I cant video chat with other ichat users. ! :O

    I have a mac mini with snow leopard and my ichat was working since i started using it. Under my green video camera icon there were like 3 or 4 panels or however many there are regularly. Now the only panel is the video camera and i cant vchat with other ichat users. but when i disable the camera all the panels appear. this happened after i had my macbook ichat and mac mini ichat on at the same time.
    HELP PLEASEEE!

    Hi,
    Welcome to the    Discussions
    Scenario 1
    Next to your Own Buddy icon at the top of the Buddy list your own Video icon should be "Stacked" if you can do Multi-way Video Chats.
    As Audio chat take less bandwidth it is implied you can do Multi-way Audio Chats.
    If your Icon becomes a single "Flat" one then so will your Buddies as you will only be able to Video Chat to them one at a time.
    If you can Multi-way Chat but a Buddy can not (most likely a AIM on PC Buddy) then they will show a "Flat" iCon.
    Resized "Flat" pic
    Resized "Stacked" pic
    Scenario 2
    However these icons appear in a group at the bottom of the Buddy List, and are dark like this when a Buddy is highlighted.
    From what you posted I am not entirely clear which part you are talking about.
    I would rather be clear before we proceed.
    Can you start though with a plain Shut down and reboot of the computer and then start up iChat ?
    This will get iChat to recheck the Bandwidth (portion of your Internet Connection) it can "See" and it may do better now the other computer is not doing a Video chat.
    8:17 PM Wednesday; July 28, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • When my friend sends me a video chat request on ichat my cam light turns on, but the cam and the request dont show up. i have a macpro with os x lion

    when my friend sends me a ichat video chat request, my cam light comes on, but my cam, nor hers, nor the request she sent shows up, nor does it make the ringing sound when a call is coming in. also it says she is in another chat but shes not. and when i send the request my cam comes on, but she doesnt get the request. i have a mac pro with os x lion.

    Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.

  • Audio problems with video chat between Mac & PC

    Hello,
    My parents and I both recently purchased web cams to use for video chats. I am on a Mac, using an iSight through iChat, while they have a PC and are using a Logitech Quickcam 5000 through AOL IM version 5.9. I have successfully video chatted with other mac/isight users. Almost everything works fine chatting with my parents - the video works, and they can hear me. I however, am unable to hear them. I thought this might be a problem on their end, but when they open a video chat with me, an error message pops up saying that I "do not support the talk feature, or am not accepting talk invitations." They have been able to get the audio to work when doing so between two PCs using AOL IM. Is there anything I can do on my end that will let their audio come through to me?
    1.6 GHz PowerPC G5   Mac OS X (10.4.5)  

    Hi Raoul,
    Welcome To The Apple Discussion Pages.
    If you mean you are trying to do Audio only chats with a PC which is using AIM 5.9 or 5.5 then it will not work.
    The AIM application has never been able to do Audio Only chats to iChat
    One end needs to have a camera (preferably the Mac end).
    The PC end stilll needs to do the "Tuning" after getting to the Porperties.
    They may also need to enable the application through the XP firewall.
    And it goes without saying they have to be on XP.
    11:15 PM Thursday; March 9, 2006

  • How I can video chat from my FB friends

    Please how i can video chat  for my Facebook friends from my mac pro Mavericks

    Hi
    Have just replied to your iChat post:
    http://discussions.apple.com/message.jspa?messageID=4577049#4577049 where I've posted a link to Mercury Messenger, that might work.
    Steve

Maybe you are looking for

  • Indesign CS5 - png images blur in interactive PDF

    I use CS5 to create client documents and beginning to learn how to make PDF documents interactive.  We use .png files which export to PDF (print) with no problem either on screen or when printed, but when the same file is exported to PDF (interactive

  • Why doesn't HP Envy 4501 scan look like a real photo when I scan a photo

    I was trying to scan a photograph using the new HP Envy 4501 printer/scanner.  However, not only does some of the photo scan in pieces, none of the photos (I've tried different dpi's from 300 clear up to 1200) look like a photography when you open up

  • SAP CPS Redwood integration with Solution Manager 7.1 SP8

    Hi experts, I need your help..!! We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task? Regards Zohaib

  • [SOLVED] Ram upgraded, half usable.

    I just upgraded the RAM in my notebook to 8GB. I used crucial.com to scan my system for the correct memory. My computer recogizes that I have 8GB of RAM but it says only 3.74GB of it is usable. I looked around on Google and tried  a few different thi

  • ExtractPages non-contiguous pages (JavaScript)

    I'm a little frustrated that you can only use the extractPages function to extract contiguous page ranges to a single file... Example: Extract Pages 1 - 5 Example: Extract Pages 7 - 11 What if I want to create a script that extracts all the odd pages