Video clip doesn't show

When I connect my Panasonic Lumix DMC-FZ40 camera to iphoto 2009, the video doesn't show to be downloaded.  I'm wondering if there is any thing that can be done to make the video show to allow me to download.

Don't shoot AVCHD Lite. If you are going to shoot that then you'll need to use iMovie to edit and process it.
Regards
TD

Similar Messages

  • Video clips doesn't work in new keynote

    I recently upgraded keynote after installing os x maverick.
    When I opened my previous keynote presentation, the new keynote asked to upgrade the movie quality.
    And you have to click this option, otherwise the video clips will only come out as pictures.
    But now, some of the video clips doesn't work.  The thing is, I do not have the original video files as these are presentations given to me by others.
    What's next for me?

    Having the same problem, would greatlyu appreciate a fix. does it matter if one upgrades to the iOS or Mac Keynote options?

  • Entire frame of mini-dv video clips do NOT show in the iMovie '11 viewer in playback mode

    I am editing a wedding video in iMovie11 that was recorded on a mini dv tape.  When I move video clips from the event library to the timeline, the entire frame is displayed in the timeline.  However, the entire frame of the video clip does NOT show in the iMovie viewer or when I playback the video.  I exported the video and burned it to a dvd using Toast 11 pro.  The video recorded to the dvd as it was showing in the iMovie viewer... the full frame does not show.  I would certainly appreciate any advice as to how to solve my problem.  THANK YOU!!!

    Is your video shot in 16:9 aspect ratio or 4:3?
    You can go to File/Project Properties and set the aspect ratio for the project.
    When you get a clip that does not match the project's aspect ratio, you use the Rotate, Crop, Ken Burns tool on the middle toolbar to specify how it should be treated.
    FIT will place the entire clip in the movie, and will letterbox (black bars) so that it fits.
    CROP will fill the screen, but will cut off the top and bottom of your frame.

  • Importing video clips into slide shows

    I often insert video clips into slide shows.  They mix nicely with pan and zoom still photos.  However, the type of video clips that can be inserted is very restricted.  Why is this?
    Elements can deal with a wide variety of video formats but, as far as I can see, only AVI and WMV videos can be imported into slide shows.  Compact digital cameras typically use AVI, MOV and MP4 formats.  My camera produces MPG videos, which I cannot import.  I have to convert the clips into AVI format and reimport these into Organiser etc - which is very fiddly. I am considering buying a new camera that produces AVI video clips as standard.
    Why is the choice of video formats so limited? I cannot find a list of allowable formats on the Adobe site.

    Hi David
    Thanks for this. I tried that, but again, Streamclip only imported content from the first clip, ignoring the rest...on further inspection, all the VOB files were sub-divisions of the the first item (in essence, the system had chopped up the first recording into sections and formatted them as VOB files, but failed to do that for the remaining content of the DVD).
    I booked an appt with a Mac Genius today and he downloaded Handbrake and this appears to be the way forward - you can isolate any of the content from the DVD, and save into either avi or mp4 files. I currently don't need Streamclip, since after my selection's been saved unto the desktop it can be dragged into iMovie and edited from there. I'll be keeping Steamclip though...after all of the aggro, it seems to good to be true!
    Thanks again for responding to my query. Really appreciated that you took the time.

  • Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

    Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

    Many users have solved the problem by syncing several times; and if that doesn't work, perform a simple restore. Your titles will come back.

  • How do you increase the size of a video clip in slide show?

    Using Elements 7. Video clips can be run in full screen when from the Organizer, but when playing the slide show, they only display about 1/3 the size of the screen with a large black border around them.

    Thought I'd try this just in case they are stripping out attachments.
    Gary Grow
    6457 Audubon Sq Dr N
    Mobile, AL 36695
    Email: [email protected]
    Cell: (251) 422-8817
    The American Creed by William Tyler Paige
    I believe in the United States of America as a government of the people, by the people, for the people; whose just powers are derived from the consent of the governed, a democracy in a republic, a sovereign Nation of many sovereign States; a perfect union, one and inseparable; established upon those principles of freedom, equality, justice and humanity for which American patriots sacrificed their lives and fortunes. I therefore believe it is my duty to my country to love it, to support its Constitution, to obey its laws, to respect its flag, and to defend it against all enemies.

  • Play multiple video clips in slide show

    I have 4 video clips (or I can do it in 1 movie) I want to have a menu screen with one of the themes. Then I want the viewer to be able to choose clip 1 and then play all the way through the other 3 clips in succession. Or I want them to be able to click clip 3 and then have it play clip 3 and then through to clip 4 and return back to the menu. So basically I would like to work like a standard movie DVD you purchase at a store. Is this possible?
    I know you can put clips into slide shows (hence the title of this thread), but when I do that, it automatically starts to play through the clips. Is there a way to choose the slide show and then to give you the option in there to choose which clip your want, and then to play through the rest sequentially?

    Here's a technique I like to use...
    Create a shape -- It will be black and white where the white is what you want to show video. In the control tab of the shape you can change size/softness/location/aspect... etc.
    Lay the video on the track above - Change the VIDEO track's composite mode to TravelMatte-Luma.
    Use the video's motion tab viewer and image/wireframe in the canvas to center up the image you want.
    Add another shape above that and then video track and change to TravelMatte-Luma etc.
    The plus for this way is that you can change the video without have to reset all the croping and trying to match it all.
    Timeline pic: http://homepage.mac.com/captmench/Timeline.png
    ExampleVideo: http://homepage.mac.com/captmench/LumaMatte.mov
    Good luck,
    CaptM

  • Video clips don't show up - just a box with a red X

    Still images show up fine but video clips brough in either directly or using Send To Color from within FCP don't show up:
    1. When I use import it won't bring the clip in at all
    2. When I use FCP to send to color it just shows a red square box with a red X through it.
    Using MBPro 17"
    Thanks for any help you can provide.

    BTW, the clip is a 720x486 D1 Motion JPEG A clip - 5 seconds long @29.97fps. Also, still images don't open - guess they are not supported? Could the Motion JPEG A also be an unsupported format?

  • IPhoto pictures/video clips won't show up in iMovie HD 6

    I'm currently working on a video project for a class and have been using pictures and video clips from iPhoto to build the movie. However, all of a sudden, when I click on the "Media" pane in iMovie, the box under 'photos' is completely blank. I can;t get my iPhoto library to show up there at all.
    Can someone PLEASE help me? I have no idea what happened!!

    Nevermind, after looking through previous posts I found the answer to my question.
    I just went into iPhoto preferences and deleted all the keywords. For some reason this brought my whole iPhoto library back to iMovie!

  • Video invitation doesn't show up in iChat

    On my iMac G4 flat panel running OS X 10.4.11, iChat doesn't show an incoming video chat invitation.  This occurs on AIM account and Bonjour.  Connection Doctor shows Por Restricted.  However there are no ports restricted on my DSL Q100 modem, and I do not have the OS X 104.11 firewall enabled.
    When I place a video chat to my MacBook Pro (Mavericks) I get a video invitation just fine.

    The camera isn't built into the iMac.  I added the Logitech C270 HD Webcam a few days ago.
    iMac G4 700MHz, 640MB SDRAM; PowerMac4,2
    Mac OS X 10.4.11
    iChat 3.1.9 (v446)
    Logitech HD Webcam C270
    The following UVC cameras are supported on the Mac:
    Camera Name
    Model Number (M/N)
    Part Number (P/N)
    HD Pro Webcam C910
    V-U0017
    860-000266
    HD Webcam C270
    V-U0018
    860-000270
    HD Webcam C310
    V-U0015
    860-000259
    HD Webcam C510
    V-U0016
    860-000261
    HD Webcam C615
    V-U0027
    860-000328
    QuickCam Vision Pro for Mac
    V-UBM46
    860-000143
    The firewall on the DSL modem is off as is the Mac OS X firewall on the iMac G4.  If I start a video call from the iMac G4 to my MacBook Pro (Using AIM to AIM accounts) the invitation shows up on the MacBook Pro.  This indicates to me that it isn't a port issue.
    I tried turning on the Mac OS X firewall on the iMac G4 and adding the ports under Other.  It made no difference.
    Greg

  • Video (mp4) Doesn't Show-up After Published

    Hi
    Video (in MP4) plays well before published. BUT, after Publishing, the VIDEO Clip disappeared, BUT audio is still playing.
    What happened?
    Note: mp4 is reference in my Excel file, and saved in users\...\Videos\xxx.mp4 folder
    PK Hong

    Hi
    Instead of using If(ThisPicture="C:\User\..|ABC.JOG, Navigate,....), I used this IF (which I used before):
    If(Not(IsBlank(ColumnContainsVideoLink), Navigate...OR UpdateContext({VarVideo})...then it works even after Publishing.
    SO, it can still work but BUG shall be resolved when referring to PICTURE.
    Hope this will provide some info to MSFT for future improvement.
    PK Hong

  • My video clips no longer show the video, just audio.

    I have a video with stills and video.  After a few changes (I know I changed the duration length of the stills and I was also trying to make sure that everything fit to the frame instead of being cropped) now the movie plays the audio portion of the clip but instead of playing the video it shows nearby still or a frame from a later video.  Help!  I don't want to have to start all over again!

    You can check these prefs on the <b>about:config</b> page and make sure that they have the default value true.
    *browser.chrome.favicons
    *browser.chrome.site_icons
    You can open the <b>about:config</b> page via the location bar and you can accept the warning and click "I'll be careful" to continue.

  • 30 GB video iPod doesn't show up on my new Dual Core G5...help!

    Hello
    I'm trying to connect my 30GB video iPod to my new Dual Core 2.0 GHz G5, but nothing comes up on the desktop or iTunes. The icon on the iPod just shows the charging symbol...
    this G5 is NOT connected to the Internet, however I just updated the iPod software on another computer...I tried bringing over the latest iPod Updater from the other computer, but this doesn't work either...
    Is there anything I can do to get this to work?!
    Thank you
    chris

    Chris,
    Try resetting the iPod while it is connected to your computer...
    Resetting iPod
    Also, see if this helps...
    iPod doesn't appear in iTunes or on the Mac desktop
    btabz

  • My ipad VIDEOS app doesn't show the movie Names with IOS 7

    I just upgraded to IOS 7.  The Apple VIDEOS app no longer displays the file name for videos that don't have album art.  I have to tap on each video screen shot (which is typically meaningless) to bring up the info/play screen to see the movie's "Name".  Under IOS 6.1.4 (and prior versions) the VIDEOS app displayed the .mp4 file name underneath all videos without album art.
    Is there an option to set to get the "Name" displayed on the VIDEOS main screen, or get a LIST view rather than an icon view, using IOS 7? (I have not found one)
    Since most of my movies do not have album art this makes the VIDEOS app virtually useless.

    OK, I gave up.  You just can't fight city hall.
    After messing with changing from 'Movie' to 'Home Video' I just said screw it.  I just finished doing the following for my 64 'Home Video' movies:
    - I did a Google image search on <movie name> poster
    - I clicked on the thumbnail to bring up the image
    - I did a right-click SAVE IMAGE AS
    - I then did a GET INFO on the movie through iTunes
    - I clicked on the ARTWORK tab
    - I added the image I just found as the the artwork
    - I change the MEDIA KIND back to MOVIE
    - I then recopied the movies I keep on my iPad (about 10) from the PC
    No more problems now either with viewing the local or Shared movie lists from my iPad. As I add new movies I will make sure to manually add the artwork.  What a PITA.
    Hopefully Apple will get this fixed. This movie UI painfulness (that wasn't even a problem on IOS 6.x) is something worthy of Microsoft.

  • Nokia Video Manager doesn't show video after 35min...

    I think this has been posted before, but does any1 have a solution for this yet? Whenever the converted MP4 file reaches 35mins 45sec, the video freezes for a few seconds on the phone, the screen goes black, but the audio continues. I am using Nokia Video Manager to convert AVI files to MP4. I'm using version 1.5.20, which i believe is the latest version of the video manager software. I have tried 3 or 4 different AVI files, so the problem is not the original file, which is viewable on the PC without any problems. I have a Nokia 6210 Classic phone.
    Any help will be kindly appreciated.
    Thanks.

    Don't shoot AVCHD Lite. If you are going to shoot that then you'll need to use iMovie to edit and process it.
    Regards
    TD

Maybe you are looking for

  • Recurring Events not gets all data in a given month in C#

    Help me about this. I cannot get all the records of recurring events in Calendar. Even using <Month> ,<Year>. it doesn't give the all records. that happens when adding no end date of recurrence. ex. i want to filter all records on the 10-01-2018 by i

  • Is there a way to run Vista on an External Hard Drive?

    Am a Mac Newbie with some PC application baggage... It was my understanding that "Macs" could boot from either internal and external hard drives. I thought I could (somehow) install Vista on a partition on an external hard drive and simply connect it

  • Locking of Transactions for MM - FI Integration

    Every month, we do the closing of accounts. For this, we have to close all GRN related transactions, so that the accounting entries are not passed. We use trxn SM01, to lock, MIRO, MIGO, & ML81N, so that user does not book any entries for that month.

  • Need help in analyzing size of a table

    Hi, We have a table DUMMY_TABLE which has a clob column. We need to reduce the size of the table by updating the clob column. The table statistics before updating the clob column is showing 2MB of size as mentioned below. After we run the update scri

  • After PR convert to PO, MRP does not consider PO as the supply

    Hi gurus, The problem is like the following: Material A, Plant : CN01 Procurement type: F ( External procurement) Avability check group-- 002( standard one ) MRP type -- PD( standard one) Requirement-- 100 PC. What I did is : 1) Run MD02 ( MRP) to ge