Video Conf Manager Intergration with CM5

Hi has anybody intergrated VCM with CM5, as the documentation does not seem to mention this. The CM5 controlled end point will be 7985's and an VT advantage. There is also a 3515 MCU. The MCU registers with the VCM ok. But not sure on the intergration required for the CM5 to VCM.

You register it as a gatekeeper, but there is no way of knowing that it is registered and intergrating correctly.
We are in the process of configuring the CUVCM 5.1 with CM5 and an MCU3515.
However, finding it difficult to setup a hosted meeting the video endpoints can call in without having an IP phone hosting a meetme number,
Let me know if you or anyone has any ideas how we can host a centrallised meetme number that is hosted and active as soon as somebody calls the number.
Ed

Similar Messages

  • Cisco Call Manager intergration with Active Directory

    We have Cisco Voip which is currently not intergrated with AD. The data (users) in Call Manager have not been updated, (ie if someone left the organisation the ICT department were never told and the new starter took over) I have been asked to intergrate this with active directory and then look in ad and resolve any discrepancies. Has anyone ever completed something similar. Any advise or imput would be gratefully appreicated. Thank You

    Just make sure all the users you want to keep in CUCM are in AD and use the exact same userID or whatever field you'll use for the integration. Those users will just be updated with the AD info and any dependencies they have in CUCM will be there.
    Users that do not have a matching ID in AD will be deleted.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Third party Management intergration with OEM

    I have various Dell servers that use OpenManage Systems Management (OMSA) by Dell. I have been able to integrate OMSA and the emagent in Linux. I need to see if anyone has managed to get OMSA and OEM agent working in Windows.
    This integration allows OEM to monitor system hardware on the servers and gives a single point of management in OEM.

    Hi Shrinivasa,
    there are a lot of WCMS Systems that can be plugged with EP. Just have a look at the <a href="https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">portal content portfolio</a> where you'll find some certified business packages to integrate some CMS.
    I have good knowledge about CoreMedia and RedDot and they both run very well with EP. If I remember correctly,  the first one to be certified was a product from Interwoven, but I do not know that.
    If you do not want to invest in some external product for integration (doubled license fee, doubled administrational effort, ...) you should have a look at the following solutions:
    1. easy Web CMS by btexx (quite good)
    2. business package for web editing by SAP Consulting (same)
    3. SAP web page composer as shown on teched (part of SP 20 in Q1 2007)
    As I have a very close look to your issue (WCMS in EP) I'm looking forward to the web page composer. Maybe you should have a look at the teched slides.
    HTH,
    Carsten

  • Video conf on windows

    video conf on windows with tv tuner in pc .. cannoit sue video only boracast tv channel even if tv "off"

    Looks like it had something to do with the USB root hub on the computer.  I moved the webcam to another USB root hub on the computer and the error has not come back.

  • PCI or PIC intergration with Solution Manager

    Hi Gurus
    am investigating the intergration of PIC or PCI (not sure) intergration with Solution Manager has any of you done the intergration or know of any consulting company that have done it
    Tx

    Hi,
    Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
    This will solve your problem.
    Feel free to revert back.
    --Ragu
    Message was edited by:
            Raguraman C

  • Video Conf with iSight and 3 Powerbooks?

    Hey does any one know if Video Conf. can be done using iChat AV 3 and three current 12"/15" powerbooks?
    If so please share, need an answer ASAP.
    Thanks,
    Bigg Jon
      Mac OS X (10.4.3)  

    Hi Bijjohn,
    The host computer needs to be a G4/1Ghz Dual or above
    The other needs to be G4 1Ghz single processors or above to join a multichat.
    Apple info http://docs.info.apple.com/article.html?artnum=301050
    Ralph

  • Assuming video is not compatible with compiz-fusion...?

    I'm installing ArchLinux on a extra computer at work... works great... but for the fun of it I tried running compiz fusion on it. I get this:
    [root@myhost ~]# fusion-icon
    * Detected Session: kde
    * Searching for installed applications...
    * Using the GTK Interface
    (fusion-icon:7540): Gtk-WARNING **: Locale not supported by C library.
    Using the fallback 'C' locale.
    * KWin is already running
    * Setting window manager to Compiz
    ... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
    compiz (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
    compiz (core) - Error: Failed to manage screen: 0
    compiz (core) - Fatal: No manageable screens found on display :0.0
    * Setting window manager to KWin
    I'm just using an xorg.conf that was generated with #X -configure, and have also tried one generated with hwd -x.  Both detect  "sis" as the video driver.  Listing below...
    Am I right to assume that this means that the video in not compatible with compiz? Or could it be some settings that need to be tweaked.
    Thanks for any advice.
    Rick
    xorg.conf.sis generated with "#hwd -x"
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    # Serial Mouse not detected
    # USB Mouse not detected
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "sis"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    xorg.conf generated with "#X -configure"
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "record"
    Load "dri"
    Load "dbe"
    Load "xtrap"
    Load "GLcore"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 270 200 # mm
    Identifier "Monitor0"
    VendorName "SAM"
    ModelName "1033"
    ### Comment all HorizSync and VertRefresh values to use DDC:
    HorizSync 30.0 - 55.0
    VertRefresh 50.0 - 120.0
    Option "DPMS"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "Accel" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "TurboQueue" # [<bool>]
    #Option "FastVram" # [<bool>]
    #Option "HostBus" # [<bool>]
    #Option "RenderAcceleration" # [<bool>]
    #Option "ForceCRT1Type" # <str>
    #Option "ForceCRT2Type" # <str>
    #Option "ShadowFB" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "AGPSize" # <i>
    #Option "GARTSize" # <i>
    #Option "Vesa" # [<bool>]
    #Option "MaxXFBMem" # <i>
    #Option "EnableSiSCtrl" # [<bool>]
    #Option "SWCursor" # [<bool>]
    #Option "HWCursor" # [<bool>]
    #Option "UseColorHWCursor" # [<bool>]
    #Option "Rotate" # <str>
    #Option "Reflect" # <str>
    #Option "Xvideo" # [<bool>]
    #Option "InternalModes" # [<bool>]
    #Option "OverruleFrequencyRanges" # [<bool>]
    #Option "RestoreBySetMode" # [<bool>]
    #Option "ForceCRT1" # [<bool>]
    #Option "XvOnCRT2" # [<bool>]
    #Option "PanelDelayCompensation" # <i>
    #Option "PDC" # <i>
    #Option "PanelDelayCompensation2" # <i>
    #Option "PDC2" # <i>
    #Option "PanelDelayCompensation1" # <i>
    #Option "PDC1" # <i>
    #Option "EMI" # <i>
    #Option "LVDSHL" # <i>
    #Option "ForcePanelRGB" # <i>
    #Option "SpecialTiming" # <str>
    #Option "TVStandard" # <str>
    #Option "UseROMData" # [<bool>]
    #Option "UseOEMData" # [<bool>]
    #Option "YV12" # [<bool>]
    #Option "CHTVType" # [<bool>]
    #Option "CHTVOverscan" # [<bool>]
    #Option "CHTVSuperOverscan" # [<bool>]
    #Option "CHTVLumaBandwidthCVBS" # <i>
    #Option "CHTVLumaBandwidthSVIDEO" # <i>
    #Option "CHTVLumaFlickerFilter" # <i>
    #Option "CHTVChromaBandwidth" # <i>
    #Option "CHTVChromaFlickerFilter" # <i>
    #Option "CHTVCVBSColor" # [<bool>]
    #Option "CHTVTextEnhance" # <i>
    #Option "CHTVContrast" # <i>
    #Option "SISTVEdgeEnhance" # <i>
    #Option "SISTVAntiFlicker" # <str>
    #Option "SISTVSaturation" # <i>
    #Option "SISTVCFilter" # [<bool>]
    #Option "SISTVYFilter" # <i>
    #Option "SISTVColorCalibFine" # <i>
    #Option "SISTVColorCalibCoarse" # <i>
    #Option "SISTVXScale" # <i>
    #Option "SISTVYScale" # <i>
    #Option "TVXPosOffset" # <i>
    #Option "TVYPosOffset" # <i>
    #Option "SIS6326TVAntiFlicker" # <str>
    #Option "SIS6326TVEnableYFilter" # [<bool>]
    #Option "SIS6326TVYFilterStrong" # [<bool>]
    #Option "SIS6326TVForcePlug" # <str>
    #Option "SIS6326FSCAdjust" # <i>
    #Option "YPbPrAspectRatio" # <str>
    #Option "TVBlueWorkAround" # [<bool>]
    #Option "ColorHWCursorBlending" # [<bool>]
    #Option "ColorHWCursorBlendThreshold" # <i>
    #Option "CRT2Detection" # [<bool>]
    #Option "ForceCRT2ReDetection" # [<bool>]
    #Option "SenseYPbPr" # [<bool>]
    #Option "CRT1Gamma" # [<bool>]
    #Option "CRT2Gamma" # [<str>]
    #Option "GammaBrightness" # <str>
    #Option "GammaBrightnessCRT2" # <str>
    #Option "CRT2GammaBrightness" # <str>
    #Option "Brightness" # <str>
    #Option "NewGammaBrightness" # <str>
    #Option "CRT2Brightness" # <str>
    #Option "CRT2NewGammaBrightness" # <str>
    #Option "Contrast" # <str>
    #Option "NewGammaContrast" # <str>
    #Option "CRT2Contrast" # <str>
    #Option "CRT2NewGammaContrast" # <str>
    #Option "CRT1Saturation" # <i>
    #Option "XvGamma" # [<str>]
    #Option "XvDefaultContrast" # <i>
    #Option "XvDefaultBrightness" # <i>
    #Option "XvDefaultHue" # <i>
    #Option "XvDefaultSaturation" # <i>
    #Option "XvDefaultDisableGfx" # [<bool>]
    #Option "XvDefaultDisableGfxLR" # [<bool>]
    #Option "XvChromaMin" # <i>
    #Option "XvChromaMax" # <i>
    #Option "XvUseChromaKey" # [<bool>]
    #Option "XvInsideChromaKey" # [<bool>]
    #Option "XvYUVChromaKey" # [<bool>]
    #Option "XvDisableColorKey" # [<bool>]
    #Option "XvUseMemcpy" # [<bool>]
    #Option "BenchmarkMemcpy" # [<bool>]
    #Option "UseSSE" # [<bool>]
    #Option "XvDefaultAdaptor" # <str>
    #Option "ScaleLCD" # [<bool>]
    #Option "CenterLCD" # [<bool>]
    #Option "EnableHotkey" # [<bool>]
    #Option "ForceCRT1VGAAspect" # <str>
    #Option "ForceCRT2VGAAspect" # <str>
    #Option "MergedFB" # [<str>]
    #Option "TwinView" # [<str>]
    #Option "MergedFBAuto" # [<bool>]
    #Option "CRT2HSync" # <str>
    #Option "SecondMonitorHorizSync" # <str>
    #Option "CRT2VRefresh" # <str>
    #Option "SecondMonitorVertRefresh" # <str>
    #Option "CRT2Position" # <str>
    #Option "TwinViewOrientation" # <str>
    #Option "MetaModes" # <str>
    #Option "MergedDPI" # <str>
    #Option "MergedXinerama" # [<bool>]
    #Option "TwinviewXineramaInfo" # [<bool>]
    #Option "MergedXineramaCRT2IsScreen0" # [<bool>]
    #Option "MergedNonRectangular" # [<bool>]
    #Option "MergedMouseRestriction" # [<bool>]
    Identifier "Card0"
    Driver "sis"
    VendorName "Silicon Integrated Systems [SiS]"
    BoardName "65x/M650/740 PCI/AGP VGA Display Adapter"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    lateralus wrote:
    stingray wrote:
    Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
    Thats what I expected to hear...
    Are you 100% sure? I just run glxinfo and it says:
    direct rendering: Yes
    And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
    I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.

  • Video Conf

    Hello,
    I'd like to setup a video conference based on Solaris 2.6/Sparc
    and intranet, which tool is preferable? your suggestion is
    appreciated.
    Thanks,
    Doo

    You register it as a gatekeeper, but there is no way of knowing that it is registered and intergrating correctly.
    We are in the process of configuring the CUVCM 5.1 with CM5 and an MCU3515.
    However, finding it difficult to setup a hosted meeting the video endpoints can call in without having an IP phone hosting a meetme number,
    Let me know if you or anyone has any ideas how we can host a centrallised meetme number that is hosted and active as soon as somebody calls the number.
    Ed

  • PC died and in turn my main iTunes library. iPhone was synced to it. Now when I try to connect to another library it tells me the phone must be wiped clean before I can manage music with new library. Any way around that? Don't want to lose music.

    My PC died and in turn so did my main iTunes library.  My iPhone was synced to the library that is gone.  Now when I try to connect to another library, it tells me the phone must be wiped clean before I can manage music with new library.  Any way around that?  I don't want to lose the music that is on my phone.  I am looking for a way to tell the phone to "forget" the old library and let me start working with a new library. 

    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
    Use your backup copy of your computer to put everything on the new one.
    It sounds like you have failed to do this, which is not good at all.
    You will have to transfer your itunes purchases from your iphone.  Authorize your computer for your itunes account 
    About iTunes Store authorization and deauthorization
    Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
    When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars.  So do NOT sync yet.  This is why a backup copy is so important.
    Enter one unique contact and calendar entry on your computer.
    When you first sync, you should get the option to merger the data.  Choose it.
    If you want your pics, then you will need to e-mail them to yourself before you sync.  They will not be of the original quality as they are reduced when synced to iphone.
    When all is as goos as it can be, then backup your computer, and always maintain the backup.

  • K9N2 SLI Platinum video won't initialize with monitor connected

    Hi,
    I've gone through the RMA process with my vendor and I am on my third motherboard right now and I am still having an issue (so, basically, nightmare scenario here  ). The first and second motherboard failures seemed slightly different but the failure seems to be the same for the second and third and it is making me think that another factor may be at play other than the motherboard. All of the failures have been with the integrated video (which is all I plan to use at the moment --I don't even own a PCI-E video card right now nor have any plans to get one in the near future).
    In the first motherboard, everything seemed to work (as far as I could tell --4 green diagnostic LED's and all that) but no video signal was produced. Testing with an antediluvian Virge DX based PCI card (some of you kiddies may be too young to remember such things) did show normal booting with that video card (as far as I allowed it to go) and I suspect, from the pattern of hard drive activity, that with the integrated video the boot process was also normal (I just couldn't see it because of no video signal being produced). But that is past and has been RMA'd.
    The replacement motherboard and the motherboard replacing the replacement motherboard, on the other hand, have seemed unable to initialize video whenever my monitor is connected but if the monitor is not connected, they work fine (but then video defaults to a 1028x768 mode and I cannot run my monitor at native resolution). Curiously enough, my second motherboard worked correctly twice before exhibiting the described behavior making me think, at the time, that I just got really unlucky and simply had had it fail shortly after testing it those two initial times.
    Not being able to initialize video while the monitor is plugged in means that if I try to start it while the monitor is attached, the motherboard will not even POST and that the diagnostic LED's will be stuck at the video initialization stage (three reds, and one green at group 4).
    Furthermore, if I start it with no monitor attached and plug the monitor in after I get 4 green LED's, it will start booting the OS (Windows XP) but the screen will go black when the Windows XP logo should be appearing. I can also leave it unplugged until it should be at the Windows XP logo stage (or plug it after the 4 green LED's and unplug it again before the video mode switch happens) and when I plug it back in I can see the Windows XP logo. However, as soon as it switches to the Windows XP desktop, I get a black screen.
    And again, if I leave the monitor unplugged until the Desktop should be showing up and I plug it in at that point (or go through the process of plugging and unplugging the monitor while avoiding having video mode switches happen with the monitor plugged in) I do get a Windows desktop at the 1024x768 resolution. Once in the desktop, as far as I can tell, I can do anything there that I normally would be able to do (so I mostly have a working system, as far as I can tell). I have even installed drivers, verified that the sound works, etc.. I will still do a repair install at some point because I am not doing this the "right way" and I probably needed to do it anyway (though I think it's using the right kernel and everything --showing 3 CPU's, etc.) but I am not looking for answers with that as my issue shows up before the system even goes through POST. Again, note that I cannot even take advantage of my monitor's native resolution with the current kludge.
    Curiously enough, if I try to switch to my native resolution of 1920x1200 it will do it but only by switching me to a virtual 1920x1200 desktop on a 1024x768 display (so there's no actual video mode switch involved and the desktop becomes bigger than what my monitor can show). It's as if part of the subsystem is reading the monitor and "knows" that it supports 1920x1200 but another part of the subsystem is just assuming some sort of 1024x768 default common lowest denominator for digital displays. I attribute this to the fact that video has been initialized with no monitor connected.
    I originally had a 350W Enermax power supply (which worked as long as the monitor was not plugged in) supplying 32A on the +3.3V rail, 32A on the +5V rail and 26A on the +12V rail but I replaced it with the power supply shown on my profile (which was probably totally unnecessary as I'm only using the integrated video --but hey, I now have a blue light coming from my power supply so that makes it all worth it  ). I suppose both power supplies could work badly with this motherboard model but it seems exceedingly unlikely that that would be the case (specially since everything works as long as there is no monitor plugged in during video mode switches).
    I currently am running it, on cardboard, with a single stick of RAM (on the slot next to the CPU) and nothing else connected to it except the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). I did play with RAM timings at the request of tech support but I can't imagine how it could be a RAM problem when everything works as long as a monitor isn't plugged in during video mode switches.
    I did update the BIOS from 3.4 to 3.5. 3.5 did not seem to be available at the time of my previous motherboard and I knew it was a real long shot for this to be a BIOS issue that would be fixed with the 3.5 update (specially since the update mentions only CPU support stuff and nothing about video) but I am desperate. Yes, I have done the whole resetting the CMOS thing.
    I am even considering the possibility that there may be some weird incompatibility between the video on this board and my monitor (under the assumption that, quoting Holmes, once you have eliminated the impossible, whatever remains, however improbable, must be the truth). I don't even know how that would work. Note that my monitor worked in my previous system with the digital input (my previous system is no longer available to me for testing --but I did get a chance to test it, after having problems with my first K9N2 SLI Platinum motherboard which I returned, and it worked). Note that my monitor works with the system in question (I simply cannot have it connected while there's a video mode switch under way). Note that the lack of a picture seems to be related to the motherboard as evidenced by it being stuck at the video initialization stage if I attempt to start it with the monitor connected.
    Any wild ideas? I do not want to return this motherboard a third time  and I specially do not want to return this motherboard a third time if it's something that can be easily fixed.

    Quote from: Svet on 25-May-09, 02:21:06
    Have you tried with just memory stick in 1st DIMM near to CPU socket and mainboard out of PC case?
    Yes, I currently am running it, on cardboard outside the case, with a single DIMM (on the slot next to the CPU) and nothing else connected to it except for the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). And it works,... as long as the monitor is not ever connected while video mode switches occur (including power on). And this is exactly how the previous motherboard which I returned also behaved.
    Addendum: As an additional note, I have tried the other DIMM on the same socket by the CPU with the same results (everything works as long as there's no monitor connected during a video mode switch). I also managed to make a bootable Memtest86+ (is that what people use to test memory these days?) USB stick and I am running it right now. It has shown no errors right so far but it has only been running a few minutes. I do not really expect any memory errors to be at fault since they would have to be magical memory errors which only cause problems when there is a monitor connected while a video mode switch is happening but I'm desperate to try anything to find out what the issue is.

  • Video Asset Management

    Looking for suggestions.
    We are a small business with 2-3 people editing on FCPX in the same room all on separate computers with separate versions of FCPX working on generally separate projects. We are all plugged into the same hard drive storage to access video and photo assets.
    We would like to create a system to save certain stock clips that we can tag and have this database be searchable and accessible by everyone.
    What’s going to be a nice solution? Some DAM software? Some way for us to use the FCPX Library?
    Thank you.

    Hi Mkobliska,
    Welcome to the Support Communities!
    The Managing Media with Final Cut Pro X Libraries white paper (PDF) at http://www.apple.com/final-cut-pro/docs/Media_Management.pdf covers strategies for sharing external media.
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Outlook intergration with Java

    Im building a application that was orginaly intended to contain a mail client, but why reinvent the wheel right ?
    Is anyone familliar how to add funcionality to outlook ?
    I cannot seem to find information on intergration with a java program.
    Before I get a pile of retorts that I should not do this with java. I never made the decision, that came from above.
    Specificly I need to add a menu item, and an option included whenever a user rightclicks on an email.
    And vice versa I need to be able to open Outlook and jump to a specific email.
    Does anyone know where information can be found to add functionality to Outlook ? Ive been snooping around but have not found much.

    Im building a application that was orginaly intended
    to contain a mail client, but why reinvent the wheel
    right ?
    Is anyone familliar how to add funcionality to outlook
    I cannot seem to find information on intergration with
    a java program.
    Before I get a pile of retorts that I should not do
    this with java. I never made the decision, that came
    from above.
    Well, maybe you need to learn to be candid with your management. Optimism is one thing, Stupidity (theirs, not yours) is another. If it is practical and feasible to solve a problem with their requirements, be optimistic and do it. If their suggestion clearly shows a lack of engineering knowledge, politely suggest that you use the right tool for the job (which is NOT java).

  • Cisco Video Surveillance Manager, Release 7.5

    Please tell me how to install the software on openSuse?
    I downloaded and installed all with of the archive:
    Cisco Video Surveillance Manager 7.5.0 upgrade software for SUSE Linux Enterprise Server 10 SP1 (i586)   
    Cisco_VSM-7.5.0-31i-sles10.zip
    But the program still does not start, I think there is not enough what that file.
    Which files are missing and where they I can take?
    Unfortunately the installation instructions exactly for version 7.5, I have not found.
    Version 6.3 got up and installed without difficulty.

    Hi,
    the file you are using is upgrade file, you need to use the .OVA file to deploy new VSM 7.x on your UCS blade.
    below link will lead you to the OVA download for 7.X, please download the file depending on the UCS blade you are using. C series or B series.
    https://software.cisco.com/download/release.html?mdfid=282976740&flowid=46918&softwareid=281933881&release=7.5.1&relind=AVAILABLE&rellifecycle=&reltype=latest

  • Tapeless video asset management

    I am an underwater videographer with hours of footage currently stored on mini DV tapes. I have just converted to a hard drive based HD system, and realize i need a digital asset management system. I am a small scale one man business, looking for a solution to be able to store, tag and retrieve video files that integrates with Final Cut so I don't need to input data more than once. Any ideas?

    There's also FootTrack. And Frameline.
    Maybe Final Cut Server?
    Finally, Aperture now supports importing video. So this might be something worth looking into. IMHO, what it has over Lightroom is that it's a better DAM solution. So maybe Aperture for video cataloging?

  • Video asset management ideas

    I am an underwater videographer with hours of footage currently stored on mini DV tapes. I have just converted to a hard drive based HD system, and realize i need a digital asset management system. I am a small scale one man business, looking for a solution to be able to store, tag and retrieve video files that integrates with Final Cut so I don't need to input data more than once. Any ideas?

    Wet Lens wrote:
    I am an underwater videographer ..
    .. with an excellent nic!
    .. looking for a solution to be able to store, tag and retrieve video files that integrates with Final Cut so I don't need to input data more than once. Any ideas?
    no pun intended:
    iDive
    http://www.aquafadas.com/en/idive-digital-video/index.php

Maybe you are looking for