Video conferencing capability

Will the iphone have video conferencing capability or does it now?

It currently does not and we don't know if it will in the future.
You can send feedback - http://apple.com/feedback

Similar Messages

  • What System Can use for Phone & Video Conferencing

    Hello,
    What System to recommend to use for our Small office on both Voice and Video Conferencing.
    and to our branch offices.
    Regards,
    Angelo

    Hi Angelo,
    As Jaime suggested the design needs to be validated before its implemented. Assuming you are using CUCM, you can look at the possibility of using 9971 series IP phones with Video conferencing capable ISR G2 routers with PVDM-3. Please check the following
    http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-9971/data_sheet_c78-565717.html
    http://www.cisco.com/c/en/us/products/collateral/unified-communications/voice-video-conferencing-isr-routers/qa_c67-649850.html
    HTH
    Manish

  • ISDN BRI Network side to Video conferencing unit

    I would like to know if I can use a Cisco router (1760) to provide BRI's to a video conferencing unit. I would like the router to be configured for the NETWORK side so essentially it appears as the PSTN. At the main site I have a Cisco CallManager server that I would like to take in video calls from other offices and have CM basically perform the call setup to the video device connected to the 1760 router. The 1760 would connect to the CM via MGCP.

    Unfortuneatly not - IOS will not switch non voice calls through BRI ports - video calls use a data bearer capability.
    There is video support coming out soon for Call Manager - keep an eye out for it.

  • Video conferencing in training and event management.

    Hello experts,
    My client wants to configure the video conferencing facility in the training and event management module. Can somebody advice me on that part as in how to do so?
    Thanks and Regards,
    Kanika Talwar.

    Hi
    In Table V_T77TNM_DC
    We need to have the below entries
    TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
    TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
    Regards
    Kenu

  • Trying to bypass CAC for Video Conferencing using EnableBWPolicyOverride

    Scenario:
    CAC enabled and bandwith policy defined for all company sites. Video bandwidth very restricted (250 Kbps).
    VIP users were granted a Voice Policy with EnableBWPolicyOverride=TRUE (VIP users must bypass CAC).
    Test:
    P2P Video Calls between VIP users bypass CAC, allowing high video resolutions (Ok!).
    Video Conferences between VIP users don't bypass CAC, limiting video to low resolution (NOT ok).
    Is this expected, that Video Conferencing will not respect the EnableBWPolicyOverride=TRUE from the Voice Policy? (I know, it's a VOICE Policy and I'm tlaking about VIDEO. But remember, on P2P video call the bypass worked.
    Any ideas?

    Hi,
    Bandwidth policy override enables administrators to override call admission control policy decisions for a particular user, however, the policy will be overridden only for incoming calls to the user and not for outgoing calls that are placed by
    the user. So I think the policy does not apply to video conference.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Video Conferencing Application Help

    hi all,
    i am planning to devlop a n-user video+audio conference in LAN. what i plan is having a server,and all user logged in will send stream to server and recieve stream from server.Is this approach can be done and more importantly is this the way it should be done? i mean is there any better way around ?
    any help will be appreciated
    thanks in advance
    Gaurav

    hi!
    i am trying to develop a video conferencing application to run on WAN. i am new to JMF and just can't guess how much time it will take. do u have any opinion or experience on this?
    thanks...

  • Says my computer does not support video conferencing?

    Just recently whenever i tried to do video chats it tells me my computer does not support video conferencing? How can i fix this?

    In the Video Menu open the Connection Doctor and go to the Capabilities tab.
    This may give you more info about which things iChat currently thinks it can do and will tell you why It thinks it can not do certain things.
    If it says Low Bandwidth against some items you will need to do as Defcom says and alter the Quicktime > Streaming speed (System Preferences > Quicktime > Streaming) to 1.5Mbps and restart iChat to see the new Speed.
    Also check in iChat menu > Preferences > Video section that the Bandwidth Limit drop down is not set too low. (Ideally here it should be set to NONE unless you are Comcast or Road Runner) Certainly don't use 100kbps.
    8:50 PM Thursday; December 4, 2008

  • HT4534 Mac Mini HD Video Conferencing

    I am considering purchase of a mac-mini for video conferencing.  This article (http://support.apple.com/kb/HT4534?viewlocale=en_US) refers to "built in camera".  Of course, the mac-mini has no built in camera.  I would be using my HDTV for a monitor.  Can I use the Logitech c910 & the mini for HD Facetime?

    I also have a mac mini and am using the Logitech C920.  At the beggining, I had issues with its built in mics not working with FaceTime, but I found a solution for the problem and now all the programs that interface with the camera work great (FT, Skype, iMovie, etc).  If you do buy the C920 run into the same issue that I had with the mic not working, here is the quick solution for the problem:
    Cause of Problem:  The Logitech C920 camera/mic operates on a 2ch-16bit integer.  You can verify this by opening "finder + Utilities + Audio MIDI Setup" and then select the HD Pro Webcam C920 and look at the "Input" Default values.
    The Mac Mini's "Built-In Output" and "Buiilt-In Input" formats were set for 2ch-24 bit integer.  Therefore, the default input and output were out of sync with the C920 default format.
    Solution:  Change the Mac Mini's default Output to "2ch-16 bit integer".  You don't need to change the default Input but it doesn't hurt to do so.  Once you do this, the camera and it's built in mics work on facetime and all other video chat applications.

  • Secure Video conferencing with the ability to record

    Hi,
    I am looking for a flash based secure video conferencing app which has the ability to record conferences.
    I need it to enable a series of helpdesk type sessions and would prefer to use Flash so that the users do not have long set-up times.
    Does anyone know of any off the shelf or open source apps that are out there?
    Thanks

    Well and If you look at any thing by blackberry you can see that it does not match up on its features versus the iPhone. iPhone users and those of us who use it for it's amazing abilities aren't caught up on the fact that it lacks video, or picture messaging. There are other things that are more important to worry about with this phone. Play around with it and you can see that this is a very powerful tool. I switched to AT&T just to get the iPhone. Blackberry's phones have nothing on the iPhone, the way i look at it is the iPhone can only blow your mind away in the next model and until then get used to it's functions. I'd rather know how to use it at it's "simple" state as opposed to it high tech overly advanced possibilities.

  • Newb- Video conferencing with Windows possible and with what Win app?

    Giving video conferencing a shot for the first time. Is it possible to video conference with my (mostly) Windows using friends? If so, what program do they need?

    No Problem.
    For the points
    8:03 PM Monday; October 5, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Video Conferencing with IOS Homogeneous Video Conference Bridge

    Dears,
    I have CUCM 8.6 and 3945 Cisco router with 2 x PVDM-256
    I configured the IOS Homogeneous Video Conference Bridge. and I did the required configurations in the router. and I can see the conferencing bridge is registered.
    I put the conference bridge in the existing MRG and MRGL. But I am not able to do video conferencing. I can get only the audio.
    is there any thing missing ? any reolad should I do ?

    Sure.
    So on the gateway that you have the video conference configured, in which we have guranteed voice as the configuration, you will also add in an MTP profile.  The MTP profile will be configured as software and have the appropriate codec configured that you may be using because of your regions.  We have g722-64 and passthrough on one because we saw the E20's requesting MTP resources from the logs. 
    We also have additional MTP profiles configured for other codecs to include G729r8, etc.
    Register the codecs to CUCM.
    It depends on what you are trying to accomplish but we were shooting for w448p thus made sure that the "Region" for the device pool associated with the Media Resource Group for each MTP was set to 1MB for the video bandwidth.
    I hope this makes since if not I will try to pull down a config for you

  • Video conferencing w/apple tv

    I would like to know if I can do the following.
    1. Get an Apple TV
    2. Get a tv with a video camera (like the Skype compatible ones)
    3. Have a Mac with AirPlay
    And with these three things do a google hangout where the tv would act as the screen and also the video and speakers.
    Basically I want to use it for video conferencing.
    Would this work?
    If so is there a specific tv that's good for this? It seems like to good a solution, to easy...

    airplay mirror is a 1 way push of what is shown on the device
    no commication from the tv goes back so the webcam working is off the table
    but you could connect a webcam to the mac my imac works perfectly fine with both it's internal webcam and my old logitech usb webcam can chooses which one I use
    with a long cable it could be placed on top of the tv

  • Video Conferencing using JSP

    I am working on a interactive application whereby i can communicate with my peer for the purpose of elearning. Some of the functions i need to do is to interface video conferencing, live chat, live application sharing. All this to be real time.
    Anyone any advice on how to go about do it?
    Urgent advcie needed! Thanks!

    I don�t know about the video stuff, but I think that it is possible to use an applet for the chat, and filesharing.
    Andreas

  • Pc-to-pc audio/video conferencing

    I've been looking into the ability of a direct (secure) connection from one Linux machine to another for the purposes of audio/video conferencing.  I know there's stull like ekiga but that requires an account and a third party server.  I'm looking for a solution that would be completely maintained between the two or three linux machines directly (webcam/mic).  What's out there that I'm not seeing in google?

    Also interested, been meaning to move away from Skype for a time now. I've looked/asked around and found opensips. You'll still need a client to manage calls though, I'll probably try out Twinkle. I'm going to spend some time trying to set it up myself. Hope it helps.
    Edit Note: I quickly moved from twinkle to linphone.
    Last edited by milso (2010-12-24 22:48:49)

  • Designing Cisco Video conferencing solution

    Hi All,
    I need to design a single site Cisco IP Video Conferencing soultion which should support web, chat, ISDN and email etc support.
    there will be one conferencing room which will be communicating with other remote or traving users.
    the requirement is that remote or travelling users should be able to have the video conferencing facility with the Headoffice(single site) and vise versa.
    Any help will be much appreciated.
    Regards,
    Waqas

    I would recommend Cisco unified presence server for your deployment with MPX. That will give you chat, voice and video conferencing. If you dont use MPX then you can only do point-to-point video CUPS on its own doesnt support video conferencing.
    YOu can also intergrate with exchange to view meetings and unity to listen to voicemails.
    You can use VTA for the remote clients and 7985 for central site or some sort of tanberg phone if you want a larger screen.
    The remote users are going to have to have a pretty low latency connection to get good quality video/voice.
    HTH
    Matt

Maybe you are looking for

  • Possible to view presentations with embedded clips  on the ipad from an external wifi  drive?

    Hello, first of all I am happy to have joined this community, my name is Chris from Germany. I am wondering if this setting is possible: I have bought an external wifi drive (Seagate Satellite Goflex) as well as the iPad4. I am giving lectures (power

  • Item category group

    Hi gurus, Can anyone pls. help me identify the appropriate item category group for the free goods in CRM only (i.e. no R/3 integ)?  The current item category group of these products is set at NORM but we may need to change it to TANN because of an AB

  • Camera raw crash

    I use imac 4 core i7, 8GB ram, os 10.6.3 Trial install of CS5 extd. Open NEF file in camera raw (have tried 6.0 and 6.1)  Select spotting brush. Proceed to correct dust spots, etc. When I need to remove spotting circles to evaluate the image, I press

  • How can I export to a .sfw file? it does not give me the option in FILE EXPORT.

    how can I export to a .sfw file? it does not give me the option in FILE > EXPORT. I have Flash installed and everthing.

  • Messenger:Mac 7.0.1 & Microsoft OCS2007

    Hi, I have already posted this on a Microsoft forum and had no response so I thought I would try my luck. I have recently got Messenger:Mac to work with our OCS2007 server but have a strange issue. When I first signed in and someone called me, I got