Video controller( VGA support) not found

Hi !
Please guide me.
I am looking for - VIDEO CONTROLLER( VGA SUPPORT)
FOR MY COMPUTER
HP Pavilion w1164d Desktop PC
monitor name - hp pavilion mx 704
Microsoft windows xp Professional (5.1, Build 2600)
System Manufacturer: Hewlett-Packard
Bios hoenix - AwardBios v6.00PG
Processor: Intel (R) Pentium(R) CPU 2.80GHz
RAM- 1 GB (Updated)
32 bit
sp3
OS:
please provide me the link to download the
correct driver.
Kind Regards
This question was solved.
View Solution.

Hi:
For some reason that driver isn't working correctly.
See if this one from the old HP d510 works.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=97128&spf_...

Similar Messages

Video controller (vga compatible) driver needed

Hi there!! i've compaq presario v6106au, Windows XP, n im looking for the video controller (vga compatible) driver. plz hlp!! send d exact link plz!

Hello,
I recently uninstalled my disk drive because I unwisely followed some online advice. My computer has had problems the last few weeks and would freeze for a few seconds, then the screen resolution and colors would change. The colors would be really garish with greys, pinks, and yellows and a window would pop up saying my "igxprd32 display driver has stopped working normally. Save your work and reboot the system to restore full display functionality." After I restarted my computer, everything would be fine again. However, I was getting really annoyed after this happened several times in the span of a few weeks and wanted to find a solution. So I typed in that exact phrase from the window and found a forum here:
http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/The-igxprd32-display-driver-has-stopped-...
The third post down, someone said to uninstall my display driver, restart my computer, and then update my driver. Apparently this person said installing an older driver would get rid of the problem. Since the original asker reported success, I gave this a go. When I did so, the resolution became even worse and all the icons were all too big. The colors were normal, but I hated how everything looked. My dad told me to right click the desktop, go to properties, settings, and set the resolution higher, which i did to 1024 by 768 pixels. The screen was somewhat normal, but things looked elongated. I was okay with this, but then I found out my stand by mode no longer works. I only have two options: Restart or Turn Off.
After googling again, I found this forum:
http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/hybernate-and-standby-not-wo...
where they said to go to my device manager and see if anything had a yellow exclamation sign. The only thing that did have the sign was my Video Controller (VGA compatible) which was under Other Devices.
I googled again, and a forum advised to go to the HP website and go to the Support & Drivers to download my driver. I typed in my product # and a huge list came up. Are these all the drivers available for download? None of them say Video Controller. Please help, I don't know what to do and the Stand by option is incredibly important for me. Here is some info about my computer
System:
Microsoft Windows XPP Professional
Version 2002
Service Pack 3
00740-311-4297974-22996
Computer:
Joy Systems
Intel(R) Core(TM)2 CPU
6300 @ 1.86GHz
I appreciate any help you can give, please please respond.

Equium P200-1ED - can't find Video Controller VGA Compatible

Hello
I cant find Video Controller VGA Compatible
In the main support centre i couldnt find this driver.
Can some1 send me link or something.
Thank you
Equium P200-1ED

I have the same problem with my Lap Top, which is an Equium M40X-189. I have also been unable to find the driver, even using your helpful comments and link. The website is denying knowledge of any appropriate drivers for 'display' 'screen' 'graphic' 'video'. I'm also slightly struggling because my PC model also doesn't appear on the drop down list (presumably because it's too old).
Any other thoughts or suggestions on how to find the appropriate driver? Many thanks

Video Controller (VGA Compatible): Code 1

Help me! I am having "Video Controller (VGA Compatible): Code 1" It says I'm missing "Intel HD Graphics 3000", but when I downloaded it, it says my computer isn't compatible with it. What do I have to do?
*This all happened when I got Windows 8.1*
My system model: Dell System Inspiron N4110
My Operating System: Windows 8.1 Pro 32-bit (6.3, Build 9600)
My system manufacturer: Dell Inc.
Plz e-mail me: [email protected]
*Note: ONLY if you know the solution plz! No spam plz!!*

Help me! I am having "Video Controller (VGA Compatible): Code 1" It says I'm missing "Intel HD Graphics 3000", but when I downloaded it, it says my computer isn't compatible with it. What do I have to do?
*This all happened when I got Windows 8.1*
My system model: Dell System Inspiron N4110
My Operating System: Windows 8.1 Pro 32-bit (6.3, Build 9600)
My system manufacturer: Dell Inc.
Plz e-mail me: [email protected]
*Note: ONLY if you know the solution plz! No spam plz!!*

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I have Windows 8 on a Dell laptop, i upgraded to 8.1 When i download iTunes, when i click finish, awindow pops up that says," Application support not found, uninstall iTunes and download again,Error 2" After 3times,it still says same thing.

Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. " Then a second window says, " Error 2 ", "The iTunes Application cannot run without the Apple Support ...." What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck! Thank you, Bob Bryan

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

Tried to reinstall itunes and got apple application support not found. i have a folder on my desktop of apps removed during a refresh and all my apple stuff is in that folder.

Im running windows 8 on my desktop. i tried to reinstall itunes and when i open it i get the following message " Apple Application Support not found, Apple Application Support is required to run iTunes". I have a folder on my desktop that has files in it that says Apps removed during refresh and there is Apple files in there. Im guessing this could be a windows issue but Im not to good with computers. Any help would be great.

Hello agerveler,
Thanks for using Apple Support Communities.
It sounds like we may need to do a complete removal of iTunes and its components, followed by a reinstall. Follow the instructions in the following article to resolve your issue:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Take care,
Alex H.

I have windows 7. I keep getting error message"apple application support not found". I have uninstalled and reinstalled i tunes multiple times but unable to get rid of error message. Can anyone offer a solution

I have windowa 7 operating system. When I install I Tunes, I get an error message "Apple Application Support not found".
I have uninstalled and reinstalled I Tunes multiple times with same error.
Can anyone offer a solution?

See Troubleshooting issues with iTunes for Windows updates.
tt2

I did the recommended re-install to resolve the missing MSVCR80.dll file. This worked, but I am now stymied by two error messages: "Apple Mobile Device failed to start" and "Apple application support not found". How to overcome?

That worked, however I now get two error messages when I install I Tunes:
o Apple Mobile Device failed to start.
o Apple Application Support not found.
This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Apple Application Support Not Found (Error 2)

I just got a new iPad and was told to install iTunes on my PC to get started. I tried installing the lastest version of iTunes and at the end of the installation process I get 2 pop ups saying "Apple Application Support Not Found" I have uninstalled and reinstalled iTunes about 4 times now with the same problem. What do I need to do to successfully install iTunes and is there any way to use my iPad without connecting to a PC first? Please help, I would really like to use my graduation present!

Many thanks.
Okay. We'll try a "standalone" installation of Apple Application Support, then. (It still may not install, but at least we'll have a better idea of what the problem is, based on any error messages we might get.)
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Use WinRAR to expand the contents of the iTunesSetup.exe or iTunes64Setup.exe into a folder.
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us no what it says. (Precise text, please.)

Apple application support not found error? need help

I tried updating my iTunes to the current version and i've encountered several errors. After completely uninstalling and reloading iTunes, I now get the following Error: "Apple Application Support not found. Apple Application support is required to run iTunes Helper. Please uninstall itunes and reinstall. Error 2" Can someone help me? I've tried the Winrar tactic and still does not work. I am using windows vista. I want to upgrade itunes so I can use Apple TV.
thanks!

Gives
me error message Apple Application support was not found.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

When downloading itunes software i get an error message:'apple apllication support not found"

when downloading itunes software i get an error message:'apple application support not found'...error2 (windows error2)

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application, won't install normally.
tt2

I download itunes it says its successfully installed. then when i try to open it it says "apple application support not found" PLEASE HELP!!

I download itunes it says its successfully installed but then when i try to open it is says "Apple Application Support not found"

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Video controller( VGA support) not found

Similar Messages

Maybe you are looking for