Video conversion adds black horiz bars

I just converted a quicktime move to flash. It seem flash has
added thick black horizonatl bars to the top and bottom of the .swf
and .fla. What would cause this and how can I fix it?
Thx!

Is this with Flash Media Encoding Server?

Similar Messages

ZEN Vision M 30GB Video Conversion problem: black scr

My husband cannot display any video on his ZEN Vision M 30 GB. Any video converted comes over with ONLY audio, black screen (? no video display )This happened with the original firmware and software. I updated firmware and did all available software updates; no change. I had a previous ZEN Vision M 30GB, which did not have any problem with video conversion and display.Are there any known problems with specific Media Player versions, or QuickTime ?which may be a potential cause of this problem?( I have heard that this product works best with Media Player 9. )Anyone had similar problems, or have any ideas?Thanks,Ravenquille

Problem apparently solved: Last night, I downloaded and installed the free program, SUPER. My husband has not had a problem so far; been working beautifully! Ravenquille

How to add black censor bars to image?

I need to use an effect where black censor bars cover up a part of my picture. How do I do this? Thanks.

If you are using FCP (mmmh what software are you using? I noticed that you are on W. XP) use BORIS vector shape filter from filters tab.
Alternatevely create a simple black rectangle in Photoshop, export it to FCP ( use composite mode to get rid of background if you get one) and rotate and resize it in FCP using motion tab tools
g
PS. The one above is a quick and general suggestion, post back if you need extra help, one of us will help you.

Video Conversion adds slight gray background

My .mov video has a perfect white background. When I convert
to .flv or .swf, I notice a very slight gray background behind the
primary image. My webpage bacjground is white, and I'd like the
Flash background to be perfectly white. Any ideas?
Thx

Sorry for the triple post. Don't know how it happened.

Why does interlaced video have vertical black bars?

Despite looking all over the internet and asking video editors I know, I've never yet found a satisfactory answer to this question:
When I bring DV PAL footage into my Mac, why are there always very thin black vertical bars on each side? And why is the image being squeezed slightly?
I think it may have something to do with interlacing.
If you look at my screenshot here.
You can see that the top image (QuickTime 7 Player) exhibits the issue I'm talking about (the prescene of combing on the man shows this is interlaced).
But the black bars have disappeared in the bottom image (QuickTIme Player X) - and you can see that it looks slightly horizontally stretched by comparison. I'm guessing this is something to do with the fact that QuickTime Player X DE-interlaces video.
The question remains though... what is it about interlacing that introduces black bars and an incorrect aspect ratio??

If you are ripping "standard" format content (4x3 ratio) then it will just appear like that on a widescreen TV. You shouldn't have that problem if you're ripping widescreen content (16x9 ratio).

Horiz lines on 16mm video conversion imported in vob format

Imported 16mm video conversion in vob format (properties 25.00fps, image 520x576). When I magnify frame in monitor screen, quality is excellent.
When I view in Flash flv or export frame (see pic), image degrades and horizontal lines appear on edge of moving objects/people - bit like old low-res monitor. Some frames seem OK but most are unusable. Anybody else seen this issue?

In NCH Prism I select the "Add DVD" option.
Output format "AVI", Encoder Options - Video compressor "DV Encoder PAL", Sound compressor "DV Audio", Sound format "48,000 Hz Stereo".
Video Output options "Tick, Resize Video" -> "Shrink or Enlarge ... 720W x 576H". "Tick, Change framerate 25.00"
Works an absolute treat so far.

How to add a black censor bar to a face that moves with the face?

Please tell me how to do that
I have final cut pro x

Does it have to be a black censor bar? if not look at the Censor effect.
If it has to be a black bar. Make the bar using a Custom generator in Solids. Crop it to whatever size you want using the Crop function in the Viewer. Use the Transform function in the Viewer to position. You can keframe the crop and transform functions to animate the bar as needed.

Hotshot video conversion resolution? No full screen ever?

I have the Pantech Hotshot. The screen resolution of the phone is 400wide x 240high. When I convert a video to that resolution the phone always reduces it to 320 wide instead of filling the screen to the 400 wide and makes the 240 high even smaller. If I convert the video to a larger size it makes the video on screen even smaller. The only video resolution that works decent is 320x240 which fills the screen top to bottom but leaves black bars right and left. If its the phone software that's doing it than what's the point of having a screen 400x240 if you can never view a video in that screen filling resolution? And the video player has no option to zoom or fill the screen. What is the best resolution to convert a video to view on this phone to fill the screen completely like every phone I've ever had was able to do? Thanks

"The screen resolution of the phone is 400wide x 240high. When I convert a video to that resolution the phone always reduces it to 320 wide instead of filling the screen to the 400 wide and makes the 240 high even smaller. If I convert the video to a larger size it makes the video on screen even smaller."
I think you have not found the solution to your situation. We have a non-smartphone (Samsung u370) that, like your phone, has a screen resolution of 400x240 and, like your phone, seemingly won't play a video at the correct resolution when the video is a resolution that exceeds 320x240.
On this u370 phone while playing a video, there are icons on the screen one of which looks like an "X" with arrows at the end of each of the ends of the "X". Tapping this icons causes the video player to expand the video so that now it's playing at the full horizontal resolution of 400.
The video player on our flip phones works the same way. Our LG vx8370 has a 320x240 screen. When I play a 320x240 video, initially the video players plays the video at a resolution of 240 x something. When I push up on the directional pad, then the phone expands the video and then plays it at 320x240.
One more thing. My experience on two different Verizon non-smartphones is the same when it comes to playing widescreen videos -- when I play a video of a resolution such that I have to select the option to expand the video so that the video is playing at the full horizontal resolution of the video, the video player won't show the correct vertical resolution of the widescreen video. Instead, the video player stretches the video to fill the vertical resolution of the phone's screen. While that is tolerable to me for a 16x9 video, my preference is that I find a stretched 2.35:1 video to look unwatchable. The only way that I can preserve the aspect ratio of the widescreen video is to use a video conversion tool that lets me pad the video with blank lines. FFmpeg and mencoder are two tools that have this padding option. So this is what I came up with. Suppose I have a 16:9 widescreen video. The video would need to be about 400x224. Since the video player software on the Verizon non-smartphones will play incorrectly by showing a video stretched to fill the whole screen, I'll need to use the padding command in ffmpeg and add 16 blank lines -- 8 lines above the video and 8 lines below the video. The ffmpeg command for that is
scale=400:224,pad=400:240:0:8
ffmpeg will scale the video to 400x224. The pad command tells ffmpeg that the converted video will have a total of 240 vertical lines of which 224 are the video and 16 of which are blank lines. The "8" tells ffmpeg how to center the video -- there'll be 8 lines above the video and 8 lines below the video.
Since ffmpeg uses a command line interface, two free graphic user interfaces for ffmpeg that I like are Avanti and Pazera:
http://www.videohelp.com/tools/Avanti
http://www.pazera-software.com/products/audio-extractor/
Pazera uses an older version of ffmpeg which can be updated after installing pazera by, if I remember correctly, just deleting the older ffmpeg file and replacing it with the new one.

Problem in DAM video conversion

Hi,
I am using Webcenter Content 11.1.1.8.0 and I configured IBR for video conversion.
When I uploadmp4 video file, I am getting below error,
Content item 'Content000242' was not successfully checked in. Unable to set the default rendition set for DAM conversion
I have seen the below instructions in documentation that I need to update config file.
1. Open the following directory of your Content Server instance:
<IntradocDir>/config/
2. Open the config.cfg file in a standard text editor.
3. Under the #Additional Variables section, add DefaultVideoConversionSet and set
it equal to the factory you want as the default rendition set. The default must
match a rendition set in the choice list of the VideoConversions metadata field,
defined using the Configuration Manager applet.
4. Save changes to the config.cfg file and close the file.
5. Restart Content Server
http://docs.oracle.com/cd/E14571_01/doc.1111/e10800.pdf
Pg 85 and 86.
What is the value I should put in config. file.
DefaultVideoConversionSet = {What Value Goes Here}.
Please let me know if I need to do any other configuration.
Thanks

Hi Kumar ,
I think the same question is posted here :
Unable to set the default rendition set for DAM conversion
Thanks,
Srinath

Compressor Simple Video Conversion

I simply want to covert QuickTime video to Real Media or Windows Media... the instructions for this are nothing but a maze of run around confusion.... "add plug-ins" that can't be found... compressor won't let me select Real Media as a choice even though Real Media shows up in the applications section.
I am extremely sorry I invested in a Mac after years of successful, simple video conversion on my old pc. I needed a new machine because my pc was getting old. My Mac experience from sales, consultation and beyond has been an absolute pain in the... kester!!!

Hi:
You can use Flip4Mac to encode to WMV:
http://www.flip4mac.com/wmv_studio.htm
Hope that helps !
Alberto

Firefox5 is not showing BBC iPlayer Video & Radio Other browsers are all fine(Safari,IE,Chrome) The iPlayer webpage is all there but the flash video player is black. The OS is XPpro.

Firefox5 is not showing BBC iPlayer Video & Radio.
Other browsers are all fine(Safari,IE,Chrome)
The iPlayer webpage is all there but the flash video player is black. The OS is MS Windows XP Professional 32-bit SP3.

Also, when the flash video does not show up it displays the error that I do not have the current flash player. The problem is that I do have the current flash player that actually plays flash from another section of the website.
Forgot to add that earlier.

My video previews turns black after a few seconds

I have Skype version 7.4. and use it to Skype with my sister. When I first start the video conversation, my image appears in the little box. Within a few seconds, the image disappears and I have a black/blank box. I am using a Logitech camera that's only a few weeks old. Why does my image disappear and how do I permanently fix this problem?
[Topic title updated by moderator to be more descriptive. Original topic title was: "Video Call"]

ruwim wrote:
Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
Attached is the diag results.
Thank you.
Attachments:
DxDiag.zip ‏11 KB

Video conversation freezing randomly

Hi, I am new to Skype, & have had several video conversations successfully previous to today, where everything worked fine. Today every video call would have quite a few times where the video conversation would freeze for about 15 seconds, so neither of us would hear a whole sentence of the conversation.
I have Windows 7 on my laptop.

Make an appointment at the local Genius Bar or call 800 my iphone for help.

Video capture add-on problem

Background: hardware- newly built computer- Celeron D 3.33GHz, Windows 7 64 bit (legal purchase)
software: Mozilla Firefox 27.0.1 downloaded from Mozilla, installer file=Firefox Setup Stub 27.0.1
Problem:
Firefox operates fine until I install a video capture add-on like Easy Youtube Video Downloader or Youtube and More-Easy Video Downloader from the Mozilla site.
Once one of these are installed I get lots of windows popping open everytime I go near a site with videos. One window's URL started with jsf.jsticket.net..... and asks to download some software. Multiple windows have opened with all sort of software download/install links.
I have uninstalled Firefox using RevoUninstaller and tried installing again using a freshly downloaded Firefox installer. When I put in one of these add-ons things go bad again.
I have run a security sweep in Safe Mode-proceedure outlined at http://securitytango.com/windows.php
software run in Safe Mode not attached to internet:
Rkill
Unhide
TDSSKiller
Stinger
SuperAntiSpyware (update it first)
Malwarebytes' Anti-Malware (update it first)
antivirus program (update it first)
There was now virus or malware detected.
I'm going a bit crazy because I have another machine running with Windows 7 & Firefox 27.0.1 with Youtube and More-Easy Video Downloader 1.97.25 and it works just fine.
Can anyone suggest a solution to this problem. Any help will be greatly appreciated.
Dave

We can't check if you have any malicious extensions without a list (this information is normally provided by the Troubleshooter add-on, which you declined to install).
# Type ''about:support'' into the address bar and press Enter.
# Copy the entire Extensions category to the clipboard.
# Paste the clipboard contents into a reply here.
''dottney wrote:''
Firefox operates fine until I install a video capture add-on like Easy Youtube Video Downloader or Youtube and More-Easy Video Downloader from the Mozilla site.
Are you referring to the following two add-ons from the Firefox Add-ons site? They've both been fully reviewed and have user bases numbering in the hundreds of thousands. The odds of either containing malware should be slim to none.
* https://addons.mozilla.org/firefox/addon/easy-youtube-video-download/
* https://addons.mozilla.org/firefox/addon/video-downloader-pure/

Black horizontal bars but proper footage ratio

I'm using an older version of Final Cut Pro (7) and whenever I render/play it adds black bars to the top and bottom. I'm using 1080 x 720 and all the footage is the right size, but it's still adding the bars. This need to look clean and polished in YouTube. What am I doing wrong?

1080 x 720
There is no such size.
You're in the wrong forum. Go to the Final Cut Studio forum.

Video conversion adds black horiz bars

Similar Messages

Maybe you are looking for