Video conversion to FLASH ?

Hello,
I would like to take a small home video I made and have on a DVD, and convert it to FLASH format so I can put it online.
It's a little video that I made with a camera and at the end there's a diaporama.
It's not very long, about 8 minutes total.
How can I do that ??
THANKS

Klaus1 wrote:
When you Google 'convert dvd to flash video' they show 43 million links - one of them must be right!
Hem... yeah
well that's the point - so many of them - so I felt most of them would suck
why I was posting here was to find out if someone had done that in the past (direct convertion of a DVD to FLASH or two step process - from DVD to file like .MOV/AVI/MPG then to flash)
if so, then that someone could suggest me software(s) or freeware(s) that worked out good for him
I just wanted to save myself some trouble by trying out a couple dozen softs that dont't do good !
Anyone can help ?
Thanks !

Similar Messages

  • Viewing video imported in Flash

    I'm looking at a .mov video imported into Flash as a movie
    clip. When I
    open the movie clip, there is only one keyframe on the
    timeline, the
    first one, though I can scrub with the playhead through the
    other
    frames, even through they do not show. The rest of the
    timeline seems to
    be empty. Is this the way it is supposed to be?
    Thanks

    Thanks doghouseJim, tried AVI & MP$ still no improvement. Sometime is 
    happening in the conversion process from the iMovie file to flash 
    format.
    Bruce

  • Video conversion for N8

    I've  been trying to convert movies for my N8. So far, I couldn't get the right conversion factors such as the resolution, bitrate, frame rate, video codec, etc.
    The videos I convert work on my N8 but the size always exceeds 1GB, and the video isn't in full screen.
    Does anyone here knows the best video conversion setting for the N8?
    Thanks in advance.
    Solved!
    Go to Solution.

    Hey again 00RaiserTwo!
    Here are the specifications regarding the Video for the N8, I hope this was what you where looking for.
    Display:
    360x640 pixels
    Video Playback Performance:
    encoding 25fps
    decoding 30fps
    File Formats:
    H.264
    MPEG-4, VC-1
    H.263
    Real Video 10
    ON2 VP6
    Flash video
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Video Conversion Programs

    Hi all.  I'm wondering if any of you have any experience with a video conversion program called Format Factory 2.0.  It's a freeware program that converts video files from one format to another, including converting files to .flv or .swf.  My goal is to take short video clips with our Sony digital camcorder, which saves files as .MPGs, then convert them to .flv and insert them into Captivate.  I tried a couple of files and it seemed to work pretty well.
    Is there another application that would work better?  I'm basically looking for something cheap - free is better.
    Thanks for any input.
    Mister C.

    Never used Format Factory but used the 'Super Converter' for several conversions and it works well (though never specifically tried it to FLV though, since I have Flash for converting video to FLVs)
    http://www.erightsoft.com/SUPER.html
    It's confusing to find the download link. Scroll to bottom of first page for a link somewhere, then a link toward the top of the next page, then back down to the bottom of the third....and will finally see a link for the .exe
    Erik

  • Horiz lines on 16mm video conversion imported in vob format

    Imported 16mm video conversion in vob format (properties 25.00fps, image 520x576).  When I magnify frame in monitor screen, quality is excellent.
    When I view in Flash flv or export frame (see pic), image degrades and horizontal lines appear on edge of moving objects/people - bit like old low-res monitor.  Some frames seem OK but most are unusable.  Anybody else seen this issue?

    In NCH Prism I select the "Add DVD" option.
    Output format "AVI", Encoder Options - Video compressor "DV Encoder PAL", Sound compressor "DV Audio", Sound format "48,000 Hz Stereo".
    Video Output options "Tick, Resize Video" -> "Shrink or Enlarge ... 720W x 576H".  "Tick, Change framerate 25.00"
    Works an absolute treat so far.

  • How can I change the default video conversion applied when I copy an AVI file from my PC to my Android HTC One M8 phone?

    Here's the situation...
    I have an Android HTC One M8 phone which I connect via USB cable to my PC, then I use Windows Explorer to drag and drop an AVI file from my PC onto a target folder on the phone. When I would do this after I had first purchased my phone a message box
    would come up with the heading "Convert and Copy" and ask me  "Do you want to convert <filename> before it's copied to your device?" and give me the options "Yes, convert and copy (recommended)" or "No, just
    copy Your file will be copied, but might not play on your device."
    If I chose to convert it converted the file to MP4. No problem, that's what I wanted.
    The problem I now have is that after doing some work with other video applications a while ago where I was outputting WMV files I now find that the default conversion for the above described copy from PC to Android phone now converts files to WMV.
    I simply want it to go back to converting video files copied to my phone as MP4, but I can't seem to find where I can set this!
    It appears that the copy/conversion process in Explorer is being handled in the "Portable Devices Shell Extension" dll - WPDSHEXT.DLL
    Can anyone tell me what I need to do to set the default video conversion back to MP4 ???
    Thanks

    Thanks Rob.
    I actually had no clue what the core problem was caused by. So it's Windows itself...that helps some.
    I'll resubmit there. It might actually have saved time for it to simply have been moved to there instead of off-topic, though I suppose you have to follow protocol.

  • Is there a way to shorten iMovie video conversion ?

    I am starting with a "m2ts" video file.
    I purchased a video conversion program from the Mac App Store.   It is called “AnyVideo converter HD".  It is well reviewed.
    So, I dropped in my "m2ts" file.  I set the conversion to "Computer MOV 720p HD".  "AnyVideo converter HD" converted a 1 minute video in about 15 seconds to a "mov".   The converted file had excellent picture quality and sound, it played perfectly using QuickTime.
    When I dropped this 60 second clip into iMovie 06 (set for 720p) it's conversion process took 35 minutes ?!?!   The result was flawless!  However, a two-hour video conversion would not be complete until about the time Capt. Kirk joins Starfleet.
    How can I speed this up ?

    baltwo - thank you for the expert advice. 
    I did as you instructed and the situation is better but I don't believe it's solved. 
    I still get 3 versions of Photoshop when I right click on a PSD.  I also get Dashcode and Textwrangler - which are the oddest associations.  All together I get 25 apps responding to "Open With" on a PSD.  And this is an improvement.
    Do you think I would get even better results if I ran the same command again?
    Thanks again.
    JL

  • ZEN Vision M 30GB Video Conversion problem: black scr

    My husband cannot display any video on his ZEN Vision M 30 GB. Any video converted comes over with ONLY audio, black screen (? no video display )This happened with the original firmware and software. I updated firmware and did all available software updates; no change. I had a previous ZEN Vision M 30GB, which did not have any problem with video conversion and display.Are there any known problems with specific Media Player versions, or QuickTime ?which may be a potential cause of this problem?( I have heard that this product works best with Media Player 9. )Anyone had similar problems, or have any ideas?Thanks,Ravenquille

    Problem apparently solved: Last night, I downloaded and installed the free program, SUPER. My husband has not had a problem so far; been working beautifully! Ravenquille

  • Der aufgerufene Media Encoder stürzt beim Video-Export aus flash immer ab. Weiß Jemand warum?

    Der aufgerufene Media Encoder stürzt beim Video-Export aus flash immer ab. Weiß Jemand warum?

    Hallo Mylenium,
    Du hast absolut Recht! Meine Anfrage war derart allgemein, dass Niemand damit etwas anfangen konnte. Ich habe das Problem mit dem Adobe-Chat lösen können, es hatte mit meiner AMD-Grafikkarte und einem anderen AMD-Gerät zu tun, deren Treiber aktualisiert werden mussten! Das nächste mal werde ich mich deutlicher zu verstehen geben;-)
    beste grüsse von
    Günter Merlau

  • How to watch flash based videos without adobe flash installed using Safari

    How do I watch flash based videos without adobe flash installed using Safari?

    Once you have Chrome installed, activate the Develop menu in Safari (go to Safari Preferences > Advanced > Show Develop Menu). You then will see under the Develop menu the Open Page With option and Chrome will be listed there.
    So each time you open a page with Safari requiring Flash, you use that menu option to open the same page in Chrome.

  • Can't get video conversation to work

    Hey, I'm still trying to switch from Windows to Mac.
    I set up two AIM accounts and logged in on a PC and a Mac respectively.
    But whatever I do, the video conversation icon just won't light up.
    Does anyone have any clue?

    Solved.

  • How do I embed a youtube video in a flash web page?

    I am attempting to embed a youtube video in a flash web page I created. I have been able to do this in html on static sites and thought I might be able to do the same in flash. Can anyone walk me thru the steps to do this?

    Thank you Rob,
    I am VERY new to actionscript and have an additional question:
    I saw this in the beginning notes of the document link you sent me:
    Use the following URL to load the chromeless player into your 
    application and build your own custom controls in Flash:
    http://www.youtube.com/apiplayer?version=3
    how do I do this? Do I do this in actionscript (how) or the import 
    feature?
    Any additional assistance you give me will be greatly appreciated
    Seta Majkia
    Kemitemultimedia
    www.kemitesound.com
    [email protected]

  • Is it possible to import YouTube videos into a flash FLVPlayback component...?

    Hi all,
    I'm now working on a flash website, i need to play a youtube video inside my flash movie.
    In this Flash file i have a FLVPlayback component and i tried to link the youtube video into this but did'nt work.
    Please help me...

    You should find what you need here: http://code.google.com/apis/youtube/flash_api_reference.html

  • Help! Can't play online videos in Adobe Flash CS3/ CS4.

    Hi everyone,
    I am not able to play online videos in Adobe Flash CS3/ CS4. Reinstalled, changed computer, the same. But I could play just a month ago. Any idea what could have happened to my Adobe Flash CS3/ computer  or any other source please?
    Many thanks

    Thanks for the help guys.
    Clearing the cache didn't work, but removing the Youtube cookie and restarting firefox did. I can now switch to Hi-def again
    Cheers :)

  • Playing video from a flash media server

    Can anyone point me to code to play streaming video from a Flash Media Server in Flex?

    Can you tell me how are you concluding that you are skipping few seconds when you set higher bufferTime - is it on visual inspection or say based on status messages.

Maybe you are looking for

  • Iphone wifi syncing issue with itunes 10.7

    My wife and I each have iphone 4's syncing on our respective computers running Win XP Pro SP3. After upgrading to itunes 10.7 and iOS 6, itunes doesn't reliably sync via wifi. It will sync once then won't a second time unless the computer is rebooted

  • Errors/Glitches with my brand new Equium A200 15I (incl video hardware)

    Hi, I just treated myself to a new laptop last Saturday and have thus only had it for about 3 and a half days so far but I noticed a few small things that I weren't sure were errors/faults or if they were just because its new, such as the fact that s

  • Why can't I open a dynamic PDF?

    I can open a regular PDF, even though it's a larger file than the dynamic PDF. I'm trying to open the dynamic IEP and ETR files from this site: Ohio Required and Optional Forms | Ohio Department of Education. Can anyone else? Is it the site? Can anyo

  • CLOB data type

    Problem in firing 'IF' statement which is checking whether a clob variable is NULL in a database trigger, which fires when a record is inserted thru the forms. The NOT NULL is working fine and updating but the NULL condition is not working, the trigg

  • How can i set case structure always true on boolean impulse?

    Hello everyone! I need a little help. All i want is to set a condition when to acquire data from my acquisition board. I have a sinusoidal pulse and when value its near zero (between 0.5 and -0.5) i want to start to write data and also stop condition