Video converter won't conv

The video converter I got with my Zen V Plus will not convert the .avi file I want to convert. I have tried converting it into .divx and then converting it and also using another converting technique but none seem to work. Any help out there?

I finally found the ultimate converter! If you first convert your .avi file (haven't checked with others yet)with the program DivX. convert it to a HD 080p (you will understand when u start using it) and then convert it with the creative converter! IT REALLY WORKED FOR ME! I have been frustrated over it not working for almost a year, but now it DOES work

Similar Messages

How to use iTunes installed in PC as video converter

I just got new ipad & understood that video format other than .mov & .mp4 will not play in Ipads. Somewhere I read that the iTunes software installed in my windows PC can do the conversion job from avi to mp4 format, so that after that it can be synced from PC to Ipad through iTunes.
Based on above suggestion, I tried to import the avi file into my iTunes library of PC from PC D-Drive. But it doesn't happen and I didn't get any errro too.
It just looks blank... Need your support to conver the avi files to mp4 using itunes and appreciate your help.

In I tunes, connect the pad, and pull up the movies tab. Move whatever video you want into that library, either by dragging, or include the library in I tunes.
Then at the top of I tunes, click on advanced tab. One of the choices is 'create I pad version'. I think you need to have the specific file checked. When I did this it took several of my old avi snippets, and created new files that synced and played on the pad.
This will not deal will all files, and you may need a different converter. I am am Mac guy, so my converter won't work for you, but there are plenty of pc based converters lying around.
To get the video to show up in iTunes, try the advanced tab, then sync.

Why isn't my high definition video converting to standard definition?

What I'm describing here, I've successfully accomplished many, many times using Premiere Pro CS5 and now Premiere Pro CS6. Now, for the first time ever, it's not working and I'm completely baffled. (This is a high-end Windows 7 64-Bit machine with 16GB RAM running Premiere Pro CS6.)
Here's a basic summary of my workflow. Nothing out of the ordinary here.
1. I shoot my video using a high definition camcorder (the same one I've been working with for the past year or two.
2. I import my high definition video into a 1920x1080 sequence in Premiere Pro CS6.
3. I edit my sequence until I'm happy.
4. I enter and name my Encore chapter markers in the sequence.
5. I create my Encore project and import the sequence as a timeline and set up my menus and such.
6. I build my Encore project, first into a standard definition DVD image file (so I can later burn SD-DVDs) and then build it again into a high definition Blu-ray image file (so I can later burn Blu-rays).
The Blu-ray burn is turning out just fine.
But the video in the DVD burn is all black. I can jump around from chapter to chapter and I can hear the sound, but the video doesn't show up!
I tried this a couple times thinking that maybe Encore just messed up the SD-DVD creation process but I got the same result each time. When I preview the project in Encore, it all looks just right.
So I figured, okay, something's not working when I import the sequence.
I went back to Premiere Pro thinking I'd just export my 1920x1080 sequence into a widescreen standard definition AVI and create a new sequence just for the standard definition DVD.
The exported AVI is black as well!!
I don't get it. Why on earth won't my high definition video convert properly to standard definition?
The high definition sequence looks completely normal in Premiere Pro. What could I possibly be overlooking??
One final note. Just as another test, I copied and pasted the sequence in Premier Pro, truncated it to a couple minutes (the full sequence is 90 minutes long), and exported to a widescreen AVI again.
It just finished, I tried playing it back in Windows, and it, too, is all black, sound but no video.
Like I said, this is nothing new for me. I've done it countless times with other projects. I could really use some assistance with this one.

So I exported my completed high definition sequence to an MP4 and re-imported back into Premiere Pro. Right-clicked it and created a sequence from the clip. Then I imported my chapters from the old sequence into the new one.
I returned to Encore, modified my project to work off the newly created sequence (what a pain having to recreate all the scene links) and voila, it had no trouble making a DVD this time.
So I guess I'll get out of the bad habit of my old routine and create a sequence the "right" way from now on. Funny how we get used to doing something one way and stop thinking outside the box after a while.
Jim, I don't see how that's necessary. As long as I create an Encore project based on a good high definition sequence, I have never had to do anything other than have Encore build a standard definition DVD based on the high definition sequences. It has always done the conversion for me and produced really good DVDs. Once I create a DVD image that I'm satisfied with, I simply have Encore build a Blu-ray image using the exact same project, and that works perfectly as well. I suppose I may be missing something here but it all works and works well, so I don't see a reason to create two projects when one works well.
On a separate note, is it just me or doesn't everybody think it's high time that Adobe offer a feature to import markers from one sequence into another. I can do it automatically but I have to use a macro that I created separate and apart from Premiere Pro. For that matter, I think Encore should also offer a feature to remap all scene links to a new sequence instead of forcing me to fix them one by one myself.
Anyway, thanks to all of you for pointing me in the right direction!

Video podcasts won't sync.

I subscribe to The Soup Video Podcasts. I had no problem syncing them to my ipod 3G, until I had to replace my harddrive. I erased the songs on my ipod, and synced it with itunes after I had replaced the songs. Now, everytime I sync my ipod, it won't let me put the podcasts on because it says my ipod does not support the videos, but they worked fine before I had to replace my harddrive. Any suggestions?
edit: I'm not sure if videos will sync. I haven't tried yet.
Message was edited by: hey_diana

It might be that the format of the video is not compatable with iPOD - MEANING... that the video is not in MPEG-4 format. You could try to download a video conversion program to change the format. Or use Quicktime Pro.
Try to Google for: "video convert to/for ipod" if you don't have Quicktime Pro, or any other software that can do the same.

What is the best video converter for high quality MPEG-4 for Apple TV?

What is the best video converter for high quality MPEG-4 for Apple TV?

Handbrake won't convert AVI files, But there are many more than those mentioned that will
The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
Message was edited by: Winston Churchill

MPEG-4 video converter

This is going to sound a little backwards, but does anyone know of a reliable program to change my MPEG-4 files into avi, wmv, or other files? I want to do some editing, 'cause the sound is off on some of my movies, but my video editor won't take MPEG-4 files. (These are not files that I purchased on iTunes, but files that I converted into MPEG-4 and then deleted the originals of.) Thanks for your help!

I found this one:http://www.squared5.com/ Check it out. I had trouble transposing my mpeg1muxed with sound and it did the trick. It converts a lot of formats.
Macbook Mac OS X (10.4.8)
Macbook Mac OS X (10.4.8)

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate. When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet) in full screen mode just fine. When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing. I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse. Does anybody have an answer or a work-around for me?

Hi Watch this video,
If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

Mini DVI to Video converter, red tinge

I recently bought a macbook, and so far I'm very satisfied with it (aside from the heat problems, which aren't that bad imo.) A few days ago, I recieved a Mini-DVI to Video converter in the mail to use with my six-year old television. Previously, I had used my dad's aging Dell Latitude to plug into the TV to watch old television shows I have acquired from the internet. It had great quality. However, using the same connection/cable with the macbook has given less than desirable results when it comes to color quality. Where the latitude had great color, the macbook seems to be outputting a very bright, very noticeably red picture. While it doesn't bother me significantly, it's sort of annoying to see everything with a twinge of red.
Now, I have tried calibrating the TV using the built in Mac OS utilities (on expert mode,) however this hasn't fixed the problem--the output is a little darker, but the colors are still off. The TV has had no other problems in the past; everything else that's ever been connected to the TV's S-Video connector has been perfect.
Has anyone else ever had a problem similar to this? Like I said, it's watchable but slightly annoying when the colors are off like that (especially when you compare the macbook's screen to the TV's... The macbook is perfect while the TV has an annoying red tinge.)

Just tried this, in fact its hooked up to my other monitor right now and i do still get the red tinge. The picture is perfect apart from this though. Its nice and sharp and clear.
The colour does indeed come on just fine to begin with but once the monitor has done its auto adjust it drops back to the red. I've played with the display settings, different resolutions etc for both displays and still the same.
The thing is, the mac does seem to be sending the correct signal as the monitor is initially correct. Ill try this with a CRT monitor once my battery is charged and if i can find another VGA cable in ill give that a go too.

Very confused Mini DVI to Video Converter - please help!

I have a iBook G4 that I use as my home ents hub, I purchased a DVI to Video converter which worked well for about a week until one day my Mac started recognising it as a VGA adapter.
When the adapter's plugged in the only options in the displays preferences panel are for VGA resolutions, no PAL or NTSC settings and I get a squiggly black screen on my TV.
The adapter works perfectly well with my friend's identical iBook and on his iMac too.
The mini DVI port on my mac works fine when hooked up to a VGA monitor.
HELP!!!! Until I get this fixed I'm stuck watching Lost on a 12" screen, which *****.

I have the exact same problem. For years my iBook has output happily to the tv via the Mini-VGA -> Composite/SVIDEO adaptor. Suddenly it stopped working and recognizes the adaptor as a VGA-Monitor.
I've tried resetting the PMU, flashing the PRAM and NVRAM, "shoving" the cable into the socket, deleting com.apple.windowserver.plist files...
Please help...

I have a macbook pro with a mini display port out and would like to know how to connect the video from my mac to a TV with old RCA input video, or a TV with S-video imput. How can I do this, and do I need a video converter?

I have a MacBook Pro that I want to hook up the Mini Display Port video out to a TV with RCA video imput, or a TV with S-video iimput.
How do I do this, and do I need a video converter?
Dennis

there's an adaptor for mini dvi to s-video
a well known auction site would yield results if apple don't stock it

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Video Converter Cable - VGA to Composite Video (RCA and S-Video)

Hi,
I have HP G60-125CA laptop (Windows Vista) and I am trying to transfer laptop image from laptop to TV (regular sony TV not HDTV) using Video Converter Cable - VGA to Composite Video (RCA and S-Video). But for some reason it's not happing.
Please HELP.

I think you need an active converter for this, not just a cable. Try a web search.

Html5 video player won't work with slider script??

Hi - I'm new to html5 and Dreamweaver, but I've worked with html in the past, so most things aspects aren't foreign to me.
My question is this: I'm working with an existing html5 template and it had a slider graphics bar near the top. It works fine and scrolls through three pre-made banners.
The problem is I just added the widget for HTML5 Videoplayer and inserted it into my code. The video box, etc. shows up fine, and will play, but now the slider graphic box at the top doesn't work anymore. Instead it just displays all three banners as images, one on top of the other.
When I look closer at the script code that the widget embeds, it seems as though the script widget code is not playing well with the existing script code. When I remove the script code that the widget installs, the slider works perfectly again (but the video obviously won't play).
The exact code is included below. My question is, how can I make the two of these scripts work together???Any help would be great appreciated. Thanks, Blair
<script src="scripts/elegant-press.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/jquery-1.4.2.min.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/mwEmbed-player-static.js" type="text/javascript"></script>

<link href="kaltura-html5player-widget/mwEmbed-player-static.css" rel="stylesheet" type="text/css">
<style type="text/css">
/* BeginOAWidget_Instance_2294029: #kalturaPlayer */
@import url("http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/themes/redmond/jquery-ui.css");
/* EndOAWidget_Instance_2294029 */
</style>
<script type="text/xml">

</script>

Hi - I'm new to html5 and Dreamweaver, but I've worked with html in the past, so most things aspects aren't foreign to me.
My question is this: I'm working with an existing html5 template and it had a slider graphics bar near the top. It works fine and scrolls through three pre-made banners.
The problem is I just added the widget for HTML5 Videoplayer and inserted it into my code. The video box, etc. shows up fine, and will play, but now the slider graphic box at the top doesn't work anymore. Instead it just displays all three banners as images, one on top of the other.
When I look closer at the script code that the widget embeds, it seems as though the script widget code is not playing well with the existing script code. When I remove the script code that the widget installs, the slider works perfectly again (but the video obviously won't play).
The exact code is included below. My question is, how can I make the two of these scripts work together???Any help would be great appreciated. Thanks, Blair
<script src="scripts/elegant-press.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/jquery-1.4.2.min.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/mwEmbed-player-static.js" type="text/javascript"></script>

<link href="kaltura-html5player-widget/mwEmbed-player-static.css" rel="stylesheet" type="text/css">
<style type="text/css">
/* BeginOAWidget_Instance_2294029: #kalturaPlayer */
@import url("http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/themes/redmond/jquery-ui.css");
/* EndOAWidget_Instance_2294029 */
</style>
<script type="text/xml">

</script>

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Video converter from dvd to ipod

can someone please tell me a free video converter to convert videos from a dvd to my ipod and tunes

Thank you for your posting, which is very helpful, however it will be better if you can post on the Video forum as well
http://discussions.apple.com/forum.jspa?forumID=807
By the way, I must say that it is a very good post

Video converter won't conv

Similar Messages

Maybe you are looking for