Video cropping and zooming issue
I'm new to this product and couldn't find my specific issue (or at least didn't recognize it).
I was using downloaded video to make a simple music video (to experiment with on the trial version). So I have the first clip in the sequence and then I add a second clip and after working with it for a few minutes notice that in the sequence viewer the video is enlarged and the sides are cropped so I'm only seeing an enlarged picture of the center. The zoom was still on fit though. I don't understand why the video was automatically zoomed and cropped by Premiere and when I delete the clip and put it back in it does the same.
Any insight?
The first clip in the video was a 640 x 360 While the second video was 1280 x 720 and both had square pixels (1.0)
They were however both WMVs.
The fact that the Zoom level is set to Fit means that the view in the Program Monitor is zoomed to fit the panel, not that the clip is scaled to fit the sequence.
If your second clip is larger than the first, and you place the second clip into a sequence that is sized for the first, then you are naturally only going to see a piece (such as the cropped center in your case) unless you scale the second clip down. Or use a bigger sequence.
If you want the clip to automatically be scaled to fit the sequence, then you can turn on the Default Scale To Frame Size preference. (See this for a video explanation of that preference.)
In general, you scale with the Scale property of the Motion effect, not with the Zoom setting in the panel.
Similar Messages
-
I want to crop and/or zoom into a corner of a clip in my project, and then slowly zoom back out to show the entire clip. But I can't figure out how to accomplish this. When I use the crop or clip effect, it remains for the length of the clip. To give you an idea of what I mean, there is a car that starts on the left side of the clup and goes out of frame after a few seconds, so I want to avoid showing the car by starting with a zoomed in view of the right side of the clip.
How can I zoom in on portion of my clip, then back out again?
Thanks!As John Nash points out, your Zoom and Pan can be easily done via Keyframing the Fixed * Effects>Motion>Position (Pan/location), and Motion>Scale (Zoom). Be sure to read his graciously furnished link completely, and if you do not understand any terms in it, and cannot find a useful definition of any, drop back with any questions.
As John notes, many/most Effects can be Keyframed to change over time. There ARE some exceptions, but not that many.
* Fixed Effects are those that are automatically applied to all Video Clips (Volume is a Fixed Effect, added to any Audio), and will always be there. Motion, contains Scale and Position, the two that you will use here. One adjusts these most easily and effectively from the Effects Control Panel, which is invoked by hitting Edit Effects in the Effects Tab, with that Clip Selected. Other Effects are first added from the Effects Tab.
Steve's tutorials and articles are great resources, as well, and come highly recommended, along with John's link.
Good luck, and happy editing,
Hunt
PS - as Keyframes are so very useful and powerful, and can be used in so many cases, I urge one to learn the concepts. Though time might need to be invested, it will pay great dividends later. -
Not sure if this is a bug but it's frustrating! I'm using the
Mac version of Flash CS3. I set everything up correctly to crop a
video clip (dragging the sliders in the 'Crop and Resize' tab). I
then start the queue etc. The resulting flv has NOT cropped as I
specified?? I get strange sizes, distortions etc. This also happens
by direct import to the stage (embed or external).
Also I find that I need to check the 'Resize Video' check box
even if I don't want to resize the video to get Flash to import at
the correct size of the original! This renders the cropping tool
useless. Any ideas anyone?I've since done some tests. The issue appears to be related
to the source video and not the Flash Video Encoder, particularly
the compression format. I have a set of clips at the same size but
the compression formats are different (I checked the movie
properties in QuickTime). Sorenson versions seem to crop and resize
OK, but the DV format doesn't.
At least the Flash side of things are fine. -
Crop and Zoom for picture-in-picture
I would like zoom into the part of a video and crop it so when I re-size it for picture-in-picture, I can see the only cropped area. Is that possible?
Thanks,I am a bit confused. Do you have PrPro CS 5 / 5.5, or PrElements? The reason that I ask is the post to the PrE forum HERE.
As I said in that thread, the answer is "yes," but we need to know exactly what you wish to do, so that we can tell you how to do it.
My questions:
Now, before we go into a lot of details, that might not apply, let me see if I can understand exactly what you want to do.
You have a Clip on the Video 1 Track in your Timeline. You want to zoom in on a part of that Clip. Am I correct on that?
Now, you talk about a PiP and also cropping. What do you want to crop?
Can you describe the PiP treatment, that you plan on using? For general PiP treatment, you would place the PiP Clip onto, say Video 2, and then Scale and alter its Position to suit. Is it the PiP Clip, that needs cropping?
With those answers, and any more details that you can furnish, we can tell you how to do, what you desire.
Good luck,
Hunt -
Lion vs snow leopard "pinch and zoom" issues?
Since changing to Lion from snow leapord, I can no longer "pinch and zoom" ? the only time it seem to work is with a safari page? The desktop wont zoom any more ?
You never could zoom the desktop in SL with finger gestures alone. You could zoom it by holding down the control key and using a two-finger upward swipe. Is that what you mean?
If so, you can still do this in Lion. You need to go to
> System Preferences... > Accessibility
click 'Zoom' in the sidebar list, and check 'Use scroll gesture with modifier keys to zoom' -
Hey, i want to know how to crop a section of my video, and make it so the cropped section fills up the page, how can i do this?
STICKY-CROSSStandard is like this:
Then in the effects control panel set the motion/scale to 300% and you end up with:
If you still do not understand how to do this, it is time for a basic education and extensive reading of manual, help file and watching tutorials. This is very basic. -
Zoom, Crop and Focus Issue
I took some pictures of my family zip lining. I've cropped the pictures so that the zip liners fill most of the picture. They are a bit blurry when I do this. When I zoom in just a tad using iPhoto they come into focus. No matter how close I crop the photo, however, they are never in focus. Any ideas?
Of course, doing a tight crop on a telephoto action shot might not be the sharpest to begin with!
Remember the rule of thumb that the shutter speed should be 1/35-mm effective focal length, which might not be enough for action shots. (IS won't help you here!)
Cropping effectively increases the focal length which makes the problem worse. -
Video playback and other issues
This might be a 10.6.4 issue or it could be hardware, I'm not sure.
*First Issue:*
Oftentimes, when I try to play video on my Macbook (stats included) the video hangs up and the audio skips like a bad record (remember records? ). This problem is particularly bad when playing videos from the internet but it persists even when the streaming bar is fully loaded in the browser. I took an online masters course this summer and constantly had this skipping issue so I thought it was Adobe and Apple not playing nice since their videos were Flash based. Now, I can see that the problem also occurs when trying to play Quicktime videos. I made an iweb site with a few videos and my Macbook can't seem to play them. However, when I go over to my Mac Mini it has no issues and it has the same processor in it and less RAM.
I know what your thinking; 'check the activity monitor.' I do check the activity monitor, constantly. When this problem occurs I'm never using more than 50% CPU and I usually have at least 1 GB of RAM available although the problem has manifested itself with a much as 2 GB of RAM available and minimal CPU usage.
This issue is starting to get worse and I've had a few kernal panics lately, which may or may not be related.
At the beginning of the summer I reinstalled the system from scratch to see if that would solve the issue; no such luck.
I thought is was the RAM so I tested it with Techtool Deluxe. No problems found with the RAM.
Now, this issue might be related to the second issue but I'll let you decide.
*Second Issue:*
This issue has been around for a long time and I've largely ignored it since all the forums I've been on don't know what to do/can't pin it down.
The issue is that the fan runs constantly at a high RPM no matter what I do.
Again, I check the Activity monitor consistently and I have it set so I can view "All Processes." No 'memory hogs' running.
I also have smsFanControl running and set for 1800 as the min speed.
Furthermore, my wife has the same model computer (only manufactured later) and hers runs whisper quiet while mine sounds like a wind tunnel.
In fact, as I type this I have 1.29 GB of RAM free, 97% of my processor is idle and I'm running at 65C with a fan speed of 6200 RPM.
Any thoughts on either of these two issues would be a help. ThanksDaddyPaycheck thanks for the info. I am have 7 GB of RAM and my internet access is through cable. I never had this problem before with an older computer with the same internet connection. I am not sure what to do. I recently upgraded to the 30" monitor and a new video card. I purcheased another video card, the ATI Radeon X800XT, but I haven't installed it yet. I am not sure that this will fix my problem. I have all the latest updates for Quicktime and Windows media player. I actually does it when I am playing DVD's as well.
-
Photo Books - Crop and Color Issues from Kodak Gallery
I've been spending a good amount of time creating photo books and ordering them from Kodak using the built-in online ordering feature.
I've noticed several items that I was curious if others have any experience perspective on.
1. Cropping. For a flexible full bleed photo book, the page as it is represented in PSE3 is substantially cropped when Kodak processes the book. The difference between the two is almost 1/2 on either side and 1/4 inch on on the top a bottom. (These are approximate numbers) Have others seen this? It would be nice to have a border in the software showing where the page will be cropped since the Kodak service and PSE3 are so tightly integrated.
2. The colors come seem to come off a bit dark as compared to prints I have ordered and the images are all very slightly pixelated as compared to prints. Nothing awful, but not what you would want for your best photos.
I am hoping to learn if others have seen these issues and learned to live with them or are the other photo book providers that could turn a pdf into a higher quality book?
Thank you for your assistance.
Wes Gimbert
Cincinnati, OHI haven't used the Kodak Gallery for photo books. I have been tempted a time or two, but so far I have ordered my books through Mypublisher.com. The product is about the same. And I saw one of their books last Christmas and was impressed with it. In reading through the instructions from Mypublisher, they warn that there will be some cropping on full-bleed images and advise to be sure to allow for that. I have not run into the color or brightness difference that you mentioned. There are those who will disagree with me, but I read an article awhile back that indicated that most of the online photo processors as well as many of the one-hour minilabs standardize their equipment to the sRGB color space. So that is what I have used when preparing my books, and I have been very pleased with the results.
As far as your pages are concerned, you might try what I did in my last project. The pictures didn't fit any of the templates provided by the publisher, so I created my own pages in Photoshop. I positioned the pictures where I wanted them and added my own text. Then I just created my book using those pages. It turned out very nicely. I have distributed 75 copies of the album so far and everyone has really liked it.
Mypublisher.com provides software that you download and create your album on your computer. Then when you are ready to order there is a menu item that connects you to the Web site. The only problem is, this is a Windows service only. There is no support for the Mac. -
Embedded video's and sound issue
I have a keynote presentation I have created and I embedded a video in one of the slides. The video plays just fine on the iMac with sound but when I play it through Apple TV or a projector the sound doesnt come through the TV or sound system just through my laptop. How do i get the sound to come through the TV?
I assume you have used the headphone jack to connect your computer to the sound system. You have to go into system preferences and make sure the SOUND is set to output to the Line Out and not the internal speakers.
If you are AirPlaying it might be an issue with the age of your computer or you don't have Apple TV selected as the SOUND output preference.
Check your sound preferences to make sure the sound is being sent to the right place. -
Cropping and vignetting issues
I'm having issues when I crop, then try to apply vignetting. The vignetting effect is being applied to the original size image, causing an uneven vigneting effect. In other words, if my crop is the lower left portion of the image, the vignetting is dark in the lower left of the image but light in the upper right. How can I fix this? What am I doing wrong? At this point all I can do is crop in Photoshop first, then apply vignetting.
Vignetting is in the lens correction tab precisely because it is there to correct for lens vignetting. It can also be used in reverse to add vignetting to an image from a *lens*.
It is not designed to add vignetting to an *image*. There is presently no way to add vignetting after a crop. This is a commonly requested feature, but I suspect if it shows up, it will not be in the lens correction tab as at that point it is no longer a lens correction. -
N95 Video Podcasts and mp4 issue
Hi, I wondered if anyone could help me.
My Loan N95 8Gb is on the 'current firmware' ( v.30.0.018 - RM320 ).
Using the podcast directory on the N95 i used to be able to play the geekbreif video podcasts (mp4 format) until recently. They are still mp4 files but it only plays the sound element. Why is this?
Background - it's the same as the highly amusing dr. cockney video podcasts. I cant play them either any more. My 'old' N95 8Gb ( currently being repaired) could play these podcasts. It's likely that my old N95 8Gb was on an older version of firmware. Surely Realplayer is realplayer and they would allow backwards compatability on mp4 files.
Also, On my current loan phone, if i download an old version of the geekbreif podcast, it works. This would imply that the website are sending out a slightly different 'type' of mp4. Surely this cant be correct, as it would not be in the 'publisher's' interest to do such a thing. (i.e. make the podcast less viewable to the masses)
In anticipation....
Thanksyou don't need additional tools to load the podcast or video podcast to your ipod, excepting an ipod manager like itunes, floola or juice.
Just provide the feed into the ipod manager that you use and you are done. Probably the simplest option is to go with itunes. You need an internet connection though.
http://www.apple.com/itunes/store/podcasts.html
http://juicereceiver.sourceforge.net/
http://www.floola.com/modules/wiwimod/
EDIT: Well, Juice is not really an ipod manager, but a podcast manager/receiver -
In LR when you crop a photo, it enlarges the cropped photo to the original size. Is there a way to do this in PS CC?
So you just want the image to fill the screen after cropping? There is no option to do that directly from the Crop tool, but Ctrl (Cmd) 0 is a simple shortcut to make it happen after using the Crop tool. Is that helpful?
-
Convert and save video, audio, and images to more than a hundred standard f
I bought Quicktime pro because it said it could "Convert and save video, audio, and images to more than a hundred standard formats". I have .mov that i took and want to change to an .avi
I feel stupid but how do i do it? shouldn't there be a "convert" or "save as" button?AVI isn't dead, it remains the ONLY format in which any real editing can be performed (ie filters and colors and zooms etc). That said, converting FROM any compressed format like .mov back to an uncompressed format will not restore the information lost in the original compression conversion. Like the man said, you probably won't like the result. If you want to make an AVI to edit artistically, you'll need to go back to the source and re-record it to make an original uncompressed avi (example I use 'DVD to AVI converter' software to recode my homemade DVDs to a huge uncompressed AVI, then play with cutting and cropping and zooming and special effects and color filters, etc in a program such as VirtualDub, an THEN open in QT Pro to convert to MOVs to share).
-
Windows 8.1, PSE 11
I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos. Then some freezing. A little added crashing. A plethora of other bizarre issues as well. This just stated happening a couple of days ago.
What I have tried:
Uninstall/Install.
Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it.
Kindly advise. Thanks!
Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3500 MHz
Built-in memory: 8139 MB
Free memory: 5185 MB
Memory available to Photoshop Elements: 3255 MB
Memory used by Photoshop Elements: 70 %
Image tile size: 128K
Image cache levels: 6
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 660 Ti
Driver Version: 9.18.13.3750
Driver Date: 20140327000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 660 Ti
Video Card Memory: -2047 MB
Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
Temporary file path: C:\Users\evan\AppData\Local\Temp\
Photoshop Elements scratch has async I/O enabled
Scratch volume(s):
Startup, 931.2G, 805.4G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2011/03/29-16:11:44 63.457850 63.457850
adbeape.dll Adobe APE 2011/01/17-12:03:36 64.452786 64.452786
AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
AdobeOwl.dll Adobe Owl 2012/06/20-18:39:56 4.1.9 78.509892
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2011/03/29-16:11:44 63.378681 63.378681
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2010/10/12-08:45:30 63.139439 63.139439
AdobeXMPFiles.dll Adobe XMP Files 5.0 61.134777
adobe_caps.dll Adobe CAPS 4,0,42,0
Adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
AGM.dll AGM 2011/03/29-16:11:44 63.457850 63.457850
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 1.486530
aif_ogl.dll AIF 3.0 1.486530
amtlib.dll AMTLib 4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
amtservices.dll AMTServices 4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
ARE.dll ARE 2011/03/29-16:11:44 63.457850 63.457850
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 3.3 49.279053
AXEDOMCore.dll AXEDOMCore 3.3 49.279053
AXSLE.dll AXSLE 3.3 49.279053
Bib.dll BIB 2011/03/29-16:11:44 63.457850 63.457850
BIBUtils.dll BIBUtils 2011/03/29-16:11:44 63.457850 63.457850
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2011/03/29-16:11:44 63.457850 63.457850
data_flow.dll AIF 3.0 1.486530
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ems.dll Elements Organizer 11.0
ExtendScript.dll ExtendScript 2010/03/05-08:21:15 61.423205 61.423205
FaceDetector.dll FaceDetector 0000/00/00-00:00:00 2.0.1.1 2.0.1.1
FileInfo.dll Adobe XMP FileInfo 5.0 61.134777
filter_graph.dll AIF 3.0 1.486530
hydra_filters.dll AIF 3.0 1.486530
icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
image_compiler.dll AIF 3.0 1.486530
image_flow.dll AIF 3.0 1.486530
image_runtime.dll AIF 3.0 1.486530
JP2KLib.dll JP2KLib 2011/03/29-16:11:44 63.196876 63.196876
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
MPS.dll MPS 2011/05/24-09:45:42 63.464027 63.464027
MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.30319.1
MSVCP71.dll Microsoft® Visual Studio .NET 7.10.3077.0
MSVCR100.dll Microsoft® Visual Studio® 2010 10.00.30319.1
MSVCR71.dll Microsoft® Visual Studio .NET 7.10.3052.4
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop Elements Editor 11.0
platform.DLL Adobe Help System 1, 0, 0, 1
Plugin.dll Adobe Photoshop Elements Editor 11.0
PSArt.dll Adobe Photoshop Elements Editor 11.0
PSViews.dll Adobe Photoshop Elements Editor 11.0
ScCore.dll ScCore 2010/03/05-08:21:15 61.423205 61.423205
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
Tbb.dll Intel(R) Threading Building Blocks for Windows 2, 2, 2009, 1011
updaternotifications.dll Adobe Updater Notifications Library 2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 2.0.0.15
WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
Required plug-ins:
Accented Edges 12.0
ADM 3.11x01
Angled Strokes 12.0
Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
Average 12.0.2
Bas Relief 12.0
BMP 12.0.2
Camera Raw 7.4
Chalk & Charcoal 12.0
Charcoal 12.0
Chrome 12.0
Clouds 12.0.2
Color Halftone 12.0.2
Color Variations 12.0.4 (12.0.4x001)
Colored Pencil 12.0
Comic NO VERSION
CompuServe GIF 12.0.2
Conté Crayon 12.0
Correct Camera Distortion 12.0.2
Craquelure 12.0
Crop and Straighten Photos Filter 12.0.2
Crosshatch 12.0
Crystallize 12.0.2
Cutout 12.0
Dark Strokes 12.0
Difference Clouds 12.0.2
Diffuse Glow 12.0
Displace 12.0.2
Dry Brush 12.0
Extrude 12.0.2
FastCore Routines 12.0.4 (12.0.4x001)
Fibers 12.0.2
Film Grain 12.0
Filter Gallery 12.0
Fresco 12.0
Glass 12.0
Glowing Edges 12.0
Grain 12.0
Graphic Novel NO VERSION
Graphic Pen 12.0
Halftone Pattern 12.0
Ink Outlines 12.0
Lens Blur 12.0
Lens Flare 12.0.2
Lighting Effects 12.0.4 (12.0.4x001)
Liquify 12.0.1
Matlab Operation 12.0.4 (12.0.4x001)
Mezzotint 12.0.2
MMXCore Routines 12.0.4 (12.0.4x001)
Mosaic Tiles 12.0
Multiprocessor Support 12.0.4 (12.0.4x001)
Neon Glow 12.0
Note Paper 12.0
Ocean Ripple 12.0
OnEdge 1, 0, 0, 1
Paint Daubs 12.0
Palette Knife 12.0
Patchwork 12.0
Pen and Ink NO VERSION
Photocopy 12.0
Picture Package Filter 12.0.4 (12.0.4x001)
Pinch 12.0.2
Pixar 12.0.4 (12.0.4x001)
Plaster 12.0
Plastic Wrap 12.0
PNG 12.0.2
Pointillize 12.0.2
Polar Coordinates 12.0.2
Polar Coordinates 12.0.4 (12.0.4x001)
Poster Edges 12.0
Radial Blur 12.0.2
Read Watermark 4.0
Reticulation 12.0
Ripple 12.0.2
Rough Pastels 12.0
Save for Web & Devices 12.0
ScriptingSupport 12.0.4
Shear 12.0.2
Smart Blur 12.0.2
Smudge Stick 12.0
Solarize 12.0.2
Spatter 12.0
Spherize 12.0.2
Sponge 12.0
Sprayed Strokes 12.0
Stained Glass 12.0
Stamp 12.0
Straighten and Crop Image 12.0.4 (12.0.4x001)
Straighten Image 12.0.4 (12.0.4x001)
Sumi-e 12.0
Texture Fill 12.0.4 (12.0.4x001)
TextureSelect 12.0.4 (12.0.4x001)
Texturizer 12.0
Tiles 12.0.2
Torn Edges 12.0
Twirl 12.0.2
Underpainting 12.0
Water Paper 12.0
Watercolor 12.0
Wave 12.0.2
WIA Support 12.0.4 (12.0.4x001)
Wind 12.0.2
ZigZag 12.0.2
Optional and third party plug-ins:
Frame From Video 6.0
Magic Extractor 12.0.4 (12.0.4x001)
PhotomergeUI 12.0.4 (12.0.4x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices: NONEFinal Update: ...god willing...
OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
Wish me a lot of luck in the future.. I'm sure i'll need it!
Maybe you are looking for
-
i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears The SIM card inserted in this iPhone does not appear to be supported This iPhone is not currently setup to work with carrier you're attempting to use. Please in
-
Is there a way to remove items from "Open With" list?
I have an interesting dilemma that I have not yet found an answer to in all of my internet/discussion forum searches. Maybe I'm asking the wrong questions or searching in the wrong places, but I've given up and now have to post the question in hopes
-
Stuck with CDDB server connection
hello from belgium I am stuck , not knowing how I need to connect to CDDB server. So my imported songs stay track1, track2 etc without a title unless I type him in myself via "file - get info"... see error msg below "unable to connect to the CDDB ser
-
Hello, I would like to solve the following problem using triggers: I need to change the DeptNo for all Emps working for Dept 20 to 50; Trigger (or triggers) has to create Deptno 50 and copy the data from DeptName (dname) and DeptLocation (loc) to new
-
i have not been able to install adobe reader x for a week now. when downloading i get to about 96 percent and then it stops and says: Window Installer Service could not be accessed. It says, This can occur if the Window Installer is not correctly ins