Video Delays but music plays fine

I recently have experienced problems with my appleTV, I have only had the product for about 3 weeks, but recently trying to watch videos (either rented or owned) have caused delays in the broadcast. I listen to my music library all the time with no problems, and I am just looking for suggestions to help with the problem, without having to re-sync all of the data.

stream or sync ?
the rented i'd asume stream
if the problem is present both places i'd suspect 2½ things
1. if your hd is more then 75% full all hd struggle clear some space
2. if your hd becomes fragmented it struggle try a return to factory setup and resync
2½. if your atv becomes too hot it slows down and playing video cause more heat them music and require more of the speed the heat may have removed by slowering down to cool off

Similar Messages

  • Videos sound is slower than video but music plays fine??????

    help

    stream or sync ?
    the rented i'd asume stream
    if the problem is present both places i'd suspect 2½ things
    1. if your hd is more then 75% full all hd struggle clear some space
    2. if your hd becomes fragmented it struggle try a return to factory setup and resync
    2½. if your atv becomes too hot it slows down and playing video cause more heat them music and require more of the speed the heat may have removed by slowering down to cool off

  • Certain music videos will not play in iTunes.  The music plays fine but not the video.  No picture.

    Certain music videos will not play in iTunes.  The music plays fine but not the video.  No picture.  Same with the iPod.  Other videos in the library play fine. Help.

    Regular playlists vs smart playlist does not make a difference. What I noticed is that some videos create this behavior and some not. I created 2 videos and 2 music playlists, one with 2 songs and 2 videos (that I encoded myself with Handbrake). Another list with 2 videos and 2 songs, videos encoded with Handbrake, but that I noticed they triggered the behavior. The first playlist played fine, with no problems. The second one, created the problem. When I look at the video, it is the same type of video (bit rate, audio channels, etc...) I don't see why it would do that.
    Later I will test: playing those videos in question and then selecting songs to see if they play.

  • HT1657 I downloaded a movie and it plays without sound.  All other videos and music play fine.  I down loaded it 2x and it still doesn't work.

    I downloaded a movie and it plays without sound.  All other videos and music play fine.  I down loaded it 2x and it still doesn't work.

    Hi, thank you for your consern,
    I have Window Vista...Im not to computer friendly when it comes to deep details about the systems so I dont really know if its 32 or 64 bit but I did see that it is 919 bytes.
    I WAS able to see the videos before the upgrade and the flash animation does NOT rotate in red F.

  • I lost the sound for all apps. Music plays fine but apps do not have sound?

    How do I recover the sound in the apps, music plays fine on the iPad, but apps now have no sound.

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • So i got my iphone 6 and works fine with the bluetooth on my lexus until i plug in the charger.  When i do so the music you can't hear the music.  When i have it unplugged the music plays fine through the speakers.

    So i got my iphone 6 and the music works fine with the bluetooth on my lexus until i plug it in to the USB charger.  Then you can't hear the music.  When i have it unplugged the music plays fine through the speakers.
    When i get in the car, if the audio is set on bluetooth the music will start playing automatically without me doing anything even if i don't have the music (itunes) running. 

    Hi . I Reset My iPhone & I Do Not Know The iCloud To Get pass Activation Screen.I Need To Find Out My IMEI Number From Here.My Phone Doesn't Take A Sim So It's Not On The Slot. It's Not Located On The Back Of My Phone. & When I Press This "i" on the Home Screen A Different Number Pops Up But Not The IMEI . Can You Please Give Me Answers To Find My IMEI Number !!??

  • I got a new Macbook Pro and a Superdrive when i put in a DVD it reads it and puts a dick icon with the DVD name when i open that i have the auido and video folders but cant play the DVD anyone know why

    I got a new Macbook Pro and a Superdrive when i put in a DVD it reads it and puts a dick icon with the DVD name when i open that i have the auido and video folders but cant play the DVD anyone know why.

    Open with iDVD.app in your applications folder.
    or download VLC.app
    http://www.videolan.org/vlc/download-macosx.html

  • When I import a video on cs6 it plays fine for literally two seconds. Then it begins to freeze

    When I import a video on cs6 it plays fine for literally two seconds. Then it begins to freeze and not play smoothly, the audio is fine its just the video, even after I have rendered it, it still freezes and doesnt play yet the audio is perfectly fine... any answers please?

    What is your output going to be for... DVD, BluRay... ???
    If DVD, you want DV AVI Type 2 with 16bit 48khz sound
    Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

  • I can't play videos from you tube or Hulu on my ipad but they play fine on the iPhone, why is that and how can I fix it ?

    WHy can't I  play videos from you tube or watch Hulu on the ipad.......they play fine on the iPhone, how can I fix this ?

    Start by providing some relevant information if you need troubleshooting help. We have no idea how or what you are doing whatever it is that you are doing.

  • Garageband output on BT speaker? Too much latency, but iTunes plays fine

    Hi all
    I have a Creative D200 that I like to use to play iTunes music in my office.
    Today I tought that I would like to play my electric guitar, since I am basically alone and can make as much noise I want (yay).
    I am surprised to see thou, that iTunes play music without changing anything, while GarageBand does not .
    I have a USB unit that is my interface for Midi, Guitar and other instruments (an Alesis IO2), I use it to record my guitar, or to just play games like Rocksmith, or record riff with Guitar rig. The unit works fine, no latency when I use the headphones connected to the unit.
    Anyway; back to GB: I tried to play the guitar, and I can hear the iTunes music playing on the speaker, and the guitar play in my headphones connected to the IO2. I tried to change the output to D200 (the BT speaker), and I get the output, but the lag is so much that is impossible to play honestly.
    Tired to look for a function to reduce the latency but there is none on GB.
    Now, I understand that BT has too much delay, altho I don't understand why the output of anything on my computer is going trough the speaker with no latency at all (games, iTunes, system sounds), but neither GarageBand nor Guitar Rig are able to play (Guitar rig does not even give me output at all, Garageband give me the high latency). I tought that should not matter where the sound comes from, since everything is wired to the computer; so when the audio has to be sent to the bluetooth speaker, shouldn't matter if is the output of GB, GR or anything else.
    Possible that is possible to decode a MP3 on teh fly and play it with 0 latency, while is not possible to output the processed signal of a guitar, in the same way, on a mac pro with 16 GB of ram and 12 core?

    Hi Becca_hague,
    Thanks for the post.
    You will need at least 2MB to effectively run BT Vision.  The real problem here is not your speed, its your connection constantly dropping out.  If we can figure out why your connection is dropping and fix this, then your speed should recover by itself.
    Your noise margin is not very high at all which is strange, as one of the main culprits of a dropping connection is noise interference.  The fact you are already in the test socket rules out internal issues.  It may well be that the router you are using is faulty.  On the other hand this may not be the case.
    I would like to run a few checks on the network side of things, to see if anything stands out as odd.  Please drop me an email to the email address in my profile. (click on my name and you will find the address under the "about me" section). Include your BT account details and the link to this thread.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • IPod will not mount to desktop or iTunes - But still plays fine ??

    My iPod will no longer mount on the desktop or in iTunes. I have read through all of the postings on the site, and all of the ideas, and about tried them all. I haven't quite pinpointed the issue I'm having - if anyone can help, please post something for me.
    Equipment: iPod 4th Gen - running software version 3.1
    Tried connecting via FireWire/USB on two Macintosh G4's - both running 10.4.3, iTunes 6.01. Again, shows up in DiskUtility, but that's it.
    I tried iPod updater - but the ipod doesn't show that it's connected to do either an update or a restore. I'd gladly restore the iPod, and reload everything, but it won't show up to be able to do a restore. I also tried in terminal running the /sbin/fsck_hfs -fy /dev/disk4s3 in Terminal, and also the back up - dd if=/dev/disk3s3 of=myiPod.dmg - which did create a dmg file, which hopefully backed up my ipod - no biggie if it didn't. I just want to be able to load my podcasts again!
    The odd thing is that all the music still plays fine. The iPod charges off both the USB and FireWire. It just won't mount on either computer.
    Any help would be appreciated!!

    Hi all,
    I have been having vey similar problems and I am sure it is not an issue with ipod. I have plugged my paperweight(previously know as an ipod of the feb 2004 vintage with a 20g drive)into a pc with itunes and it was recognised. However my and other ipods do not mount in any way onto my ibook. I have tried all the resets and reinstalls possible.
    I am considering formatting the hard drive and reinstalling panther from scratch to see if this corrects the problem. However as I am not sure which update caused the problem I am concerned I will end up in the same situation.
    If anyone has any advice or knows if using Tiger will help when I reinstall, I would really appreciate it.
    I am loathed to do this as it will take days to return my mac to it's current setup. However with out a solution being offered by apple (I have had little help from the customer support lines except to say send it for a service that will cost around £100-£150) I can't see anything else left to try.
    Thanks in advance
    iBook   Mac OS X (10.3.9)  

  • Video stalls but audio plays on

    Quicktime Player Pro 7.1.3. When ever I try to view a .mov, or mpeg, the viewer freezes on the first image, but the audio track continues to play. The movies play fine in VLC, and even on other computers using QTP and Safari. Funny thing, is that in Safari, the movies do not play, yet they play fine on other computers, using Safari (1.3.2). The videos play fine on my computer, though only in Firefox. They play fine in iTunes, also.
    So, why is this happening? Quicktime app not playing movies, now Safari not playing movies from websites (movies I have made)? There has to be a connection.
    I have set up another user, and the problem still exists. I have tried reinstalling Quicktime, but problem still exists.
    Snowball iMac G4   Mac OS X (10.3.9)  

    If Safari is the only browser you are having problems with dealing with QT see if the following is of any help:
    To fix a QT related problem w/Safari, quit Safari & look in the /Library/Internet Plug-Ins folder (this is the Library folder at the root level of your HD, not the one inside your Users/user name folder).
    Try removing the VLC Plugin.plugin (if you have it) & QT Plugin.plugin files from this folder, & then relaunch Safari. If the problem isn’t fixed, a different plug-in may be to blame. Keep removing files from this folder (start with any third-party plug-ins that are present) until the problem disappears.
    Replace the plug-ins that don’t cause any problems.
    MacAddict Magazine...12/06

  • .mp3 files that used to play now say 'the file is corrupt' but they play fine in google crome. Do you have problems with your default mp3 player?

    I've posted a number of mp3 file links on our website. All have been functioning and playing well until this week, they are no longer playing when clicked on. The new tab opens, thinks, then says that the "video cannot be played because the file is corrupt". These files are able to be downloaded and played from individual computers and will play fine in other browsers - such as Google Chrome.
    Not sure if there is an issue with Firefox default mp3 player?

    I assume that this is because of the way the MP3 file is encoded.
    Sample rate: 22050 Hz
    Bitrate: 32 kb/s
    If I open the file in a tab then I see a media player, but inspecting the page source shows a video tag with no source attribute, so Firefox seems to have a problem with decoding the media header despite the audio/mpeg content type.
    I don't know what to do about this apart from playing the file in an external player or play the file via an object or embed tag to make Firefox use a plugin.
    Using a bookmarklet like this to force an audio tag doesn't work as well:
    <pre><nowiki>data:text/html,<audio src="%S" controls>
    </nowiki></pre>

  • Media in the timeline says it needs to be connected, but it plays fine.

    Hey guys,
    I'm using Final Cut 7 and today I had to disconnect my external drive that has the project I'm currently working with on it. When I reconnected the drive and opened up my project ,some of the clips in the timeline where there is usually a picture of the clip, now says the media needs to be reconnected. However, all of the media still plays fine in the viewer and the canvas. I even reconnected the media, but it still looks the same on the timeline. I was just wondering if this has happened to anyone else, and if they know the solution to it.
    Thanks,
    Jack

    Trash your Thumbnail Cache, usually located in the Final Cut Pro Documents folder.
    MtD

  • My new Ipad2 doesn't display any pictures during slideshow, although the music plays fine.

    I recently received an ipad 2 as a birthday gift from my wife, just before we hopped across the Atlantic to Europe (we wanted to make sure it worked well).  Now that we're here and I am fiddling with it more, I have found that when I play the slideshow feature either from the photos app or using the little flower icon on the lock screen, I cannot actually see any pictures.  The selected music plays during the slideshow, but there are no images displayed.
    How can I correct this problem?  I'm a little concerned about our location, because if I have to return it for warranty, I'm going to be challenged due to my location.  I'll be here for months, so I can't just wait until I go back...

    Verified - all photos is checked.  I tried a few other iterations without any positive results.  In all cases, the screen fades to black and displays nothing.
    Upon tapping the screen, I can see that it has progressed through several photos during the time the screen is dark.  This is interesting...indicating that the program is running, but without a proper display.
    This is an important feature for me. 

Maybe you are looking for

  • Possible to Stream a Flash Presentation?

    Hi all! I work for a university and we have some faculty that are creating some huge flash presentations. I know that flash is remarkably fast when it comes to downloading, but with these large presentations it's still taking some time. Is it possibl

  • OSMF 1.5 - Buffering UI - SerialElement with PreloadingProxyElement

    Hoping someone can help me with a few issues that I am seeing. I'm starting to think there is a bug with the buffering and using PreloadingProxyElement, but it's possible that I am using it in the wrong way. The first question, is there a concise and

  • Using a change document for Z table maintenance generatro to log changes

    Hi Forum, I have created a a change document for one of the Z tables now I want to use it in the table maintenance generator of this table so that any changes made to this table using maintenance generator are logged in table CDHDR and CDPOS. I am us

  • Code generating 'LPX-00651: VM Stack overflow'. What's the fix?

    While handling huge data, we are receiving the following error stack: ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00663: VM String-Stack overflow. The suggested fix is to: Increase the size of VM stacks in XmlXslVMCr

  • Passing Method to Mydeclarative Component

    dear All i can pass facets,Attributes to my Declartative component , but i failed to pass the methods. can any one help ? thanks