Video Dies after 30 Seconds
When i use my iPod 5g, the video stalls after 30 seconds and then resumes without audio. I have reset and restored the iPod. Nothing. Any ideas?
Do you have the 60gb ipod? Did you do the new update? If you said yes to both questions then that's the problem. There is a bug within the new apple ipod update that affects the 60gb ipods. There have been several posts about this where ipod will play 30 seconds of movie, stop, and continue without audio. The only solution is reinstalling from the cd that came with your ipod. And do not do update until it is resolved. I always hold off on updates for a while or I usually check this forum to see if there are any glitches. Good luck!
Similar Messages
-
Dispatcher dies after afew seconds
The dispatcher on my CI dies after afew seconds. In SAPMMC the SID becomes green then the message server closes the connection to the dispatcher forcing all WP's to die.
The error on the message server:
ERROR => MsSClientHandle: no server provides service ENQ
I have here the seveloper traces for the message server and the dispatcher just in case.
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 1736] Tue Mar 28 14:09:10 2006
[Thr 1736] MsSSetTrcLog: trc logging not active
[Thr 1736] relno 6200
[Thr 1736] patchlevel 0
[Thr 1736] patchno 1529
[Thr 1736] intno 20020600
[Thr 1736] pid 524
[Thr 1736] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 524) [msxxserv.c 1533]
[Thr 1736] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 1736] *** I listen to port sapmsRD1 (3610) ***
[Thr 1736] *** HTTP port 8110 state LISTEN ***
[Thr 1736] CUSTOMER KEY: >S1988002762<
[Thr 1736] Tue Mar 28 14:10:41 2006
[Thr 1736] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from <HOST_SID_nr [msxxserv.c 4078]
[Thr 1736] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1094]
[Thr 1736] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 8618]
[Thr 1736] *** ERROR => MsSClientHandle: MsSRead C1 (belrd110_RD1_10), MSEINTERN [msxxserv.c 3675]
====================================================
Dispatcher:
trc file: "dev_disp", trc level: 1, release: "620"
Tue Mar 28 14:09:11 2006
kernel runs with dp version 13(ext=2) (@(#) DPLIB-INT-VERSION-13)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 1640
intno 20020600
make: multithreaded, ASCII
pid 3512
***LOG Q00=> DpSapEnvInit, DPStart (10 3512) [dpxxdisp.c 1022]
shared lib "dw_xml.dll" version 1640 successfully loaded
shared lib "dw_xtc.dll" version 1640 successfully loaded
shared lib "dw_stl.dll" version 1640 successfully loaded
Tue Mar 28 14:09:23 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0201.qqq.nxst) took 12 seconds
Tue Mar 28 14:09:41 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3452]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9880 (760)
DpShMCreate: sizeof(tm_adm) 1835536 (9132)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 03A30040, size: 2119920)
DpShMCreate: allocated sys_adm at 03A30040
DpShMCreate: allocated wp_adm at 03A30678
DpShMCreate: allocated tm_adm_list at 03A32D10
DpShMCreate: allocated tm_adm at 03A32D38
DpShMCreate: allocated wp_ca_adm at 03BF2F48
DpShMCreate: allocated appc_ca_adm at 03BF7598
DpShMCreate: allocated comm_adm_list at 03BF8D08
DpShMCreate: allocated comm_adm at 03BF8D20
DpShMCreate: allocated ca_info at 03C27B20
DpShMCreate: allocated wall_adm at 03C27B28
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2048 MB
<ES> 2047 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( belrd110) [dpxxdisp.c 9447]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 1640
Release check o.K.
Tue Mar 28 14:10:21 2006
ERROR => W0 (pid 2812) died [dpxxdisp.c 11848]
ERROR => W1 (pid 3120) died [dpxxdisp.c 11848]
ERROR => W2 (pid 1532) died [dpxxdisp.c 11848]
ERROR => W3 (pid 2864) died [dpxxdisp.c 11848]
ERROR => W4 (pid 2828) died [dpxxdisp.c 11848]
ERROR => W5 (pid 1312) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1300) died [dpxxdisp.c 11848]
ERROR => W7 (pid 3688) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W8 (pid 4064) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W9 (pid 3464) died [dpxxdisp.c 11848]
ERROR => W10 (pid 1516) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2888) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2092) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2812 (SIGUSR2)
ERROR => DpWpKill(2812, SIGUSR2) failed [dpxxtool.c 2645]
killing W1-3120 (SIGUSR2)
ERROR => DpWpKill(3120, SIGUSR2) failed [dpxxtool.c 2645]
killing W2-1532 (SIGUSR2)
ERROR => DpWpKill(1532, SIGUSR2) failed [dpxxtool.c 2645]
killing W3-2864 (SIGUSR2)
ERROR => DpWpKill(2864, SIGUSR2) failed [dpxxtool.c 2645]
killing W4-2828 (SIGUSR2)
ERROR => DpWpKill(2828, SIGUSR2) failed [dpxxtool.c 2645]
killing W5-1312 (SIGUSR2)
ERROR => DpWpKill(1312, SIGUSR2) failed [dpxxtool.c 2645]
killing W6-1300 (SIGUSR2)
ERROR => DpWpKill(1300, SIGUSR2) failed [dpxxtool.c 2645]
killing W7-3688 (SIGUSR2)
ERROR => DpWpKill(3688, SIGUSR2) failed [dpxxtool.c 2645]
killing W8-4064 (SIGUSR2)
ERROR => DpWpKill(4064, SIGUSR2) failed [dpxxtool.c 2645]
killing W9-3464 (SIGUSR2)
ERROR => DpWpKill(3464, SIGUSR2) failed [dpxxtool.c 2645]
killing W10-1516 (SIGUSR2)
ERROR => DpWpKill(1516, SIGUSR2) failed [dpxxtool.c 2645]
killing W11-2888 (SIGUSR2)
ERROR => DpWpKill(2888, SIGUSR2) failed [dpxxtool.c 2645]
killing W12-2092 (SIGUSR2)
ERROR => DpWpKill(2092, SIGUSR2) failed [dpxxtool.c 2645]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
Tue Mar 28 14:10:31 2006
NiISelect: TIMEOUT occured(10000 msecs)
dump system status
Workprocess Table (long) Tue Mar 28 18:10:31 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2812 Ended no 1 0 0
1 DIA 3120 Ended no 1 0 0
2 DIA 1532 Ended no 1 0 0
3 DIA 2864 Ended no 1 0 0
4 DIA 2828 Ended no 1 0 0
5 DIA 1312 Ended no 1 0 0
6 UPD 1300 Ended no 1 0 0
7 UPD 3688 Ended no 1 0 0
8 ENQ 4064 Ended no 1 0 0
9 BTC 3464 Ended no 1 0 0
10 BTC 1516 Ended no 1 0 0
11 SPO 2888 Ended no 1 0 0
12 UP2 2092 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 28 18:10:31 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
4
4
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 10
wake_evt_udp_now 0
wake events total 6, udp 5 ( 83%), shm 1 ( 16%)
since last update total 6, udp 5 ( 83%), shm 1 ( 16%)
Dump of tm_adm structure: Tue Mar 28 18:10:31 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Mar 28 18:10:31 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
Tue Mar 28 14:10:36 2006
NiISelect: TIMEOUT occured(5000 msecs)
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
killing process (1096) (SOFT_KILL)
killing process (3368) (SOFT_KILL)
[DpProcDied] Process lives (PID:1096 HANDLE:1556)
wait for end of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:37 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process died (PID:1096 HANDLE:1556)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:38 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:39 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:40 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:41 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process died (PID:3368 HANDLE:1548)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60, ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4, ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9673]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60, ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40, ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40, ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 12)
MBUF component DOWN
NiBufClose: clear extensions for handle 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close nihandle-socket 3-1560
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3512) [dpxxdisp.c 8207]
Good Bye .....I added the sapservice and sidadm accounts in the login properties for the respective databases for some reason those users did not have access rights to the DB.
Strange! windows thing I guess!
Anyhow. I solved it. thanks for your help.
Damien -
My canon 600D stops recording videos automatically after 8 seconds.
my canon 600D stops recording videos automatically after 8 seconds. i can't find anything of that sort in the settings menu.
what settings should be used??my canon 600D stops recording videos automatically after 8 seconds. i can't find anything of that sort in the settings menu.
what settings should be used?? -
My MacBook will not play videos. No sound and the video stops after a few seconds.
My Mac book pro will not play videos. No sound and the video stops after a few seconds.
Hello GrahamBIOM,
I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
Please respond back at your earliest convenience with results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?
What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/ -
Video freeze after 9 second playing then need to reboot, help?
video freeze after 9 sec play, then need to reboot, help?
video freeze after 9 sec play, then need to reboot, help?
-
Dispatcher dies after 1 minute
Hi,
I am on ERP2005 SR2, with Windows 2003 and MSSQL 2005 DB.
I have recently performed a database restore of the SAP database, but I am not able to restart SAP after this.
The dispatcher dies after about 1 minute. You will find the dev_disp and dev_w0 files below:
dev_disp file:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid T01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4204
Thu Feb 08 09:02:37 2007
kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4204) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 08 09:02:41 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapr3s_T01_00 <
DpShMCreate: sizeof(wp_adm) 11648 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000BDA0050, size: 5320400)
DpShMCreate: allocated sys_adm at 000000000BDA0050
DpShMCreate: allocated wp_adm at 000000000BDA1AB0
DpShMCreate: allocated tm_adm_list at 000000000BDA4830
DpShMCreate: allocated tm_adm at 000000000BDA4890
DpShMCreate: allocated wp_ca_adm at 000000000C217030
DpShMCreate: allocated appc_ca_adm at 000000000C21B680
DpShMCreate: allocated comm_adm at 000000000C21CDF0
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000C2A3A70
DpShMCreate: allocated gw_adm at 000000000C2A3AF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000C2A3B20
DpShMCreate: allocated wall_adm at 000000000C2A3B30
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Feb 08 09:02:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sapr3s) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >sapr3s_T01_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Thu Feb 08 09:03:22 2007
ERROR => W0 (pid 4732) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2544) died [dpxxdisp.c 14299]
ERROR => W2 (pid 412) died [dpxxdisp.c 14299]
ERROR => W3 (pid 4944) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2760) died [dpxxdisp.c 14299]
ERROR => W5 (pid 1004) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 4104) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2208) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3300) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3312) died [dpxxdisp.c 14299]
ERROR => W10 (pid 4412) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4112) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4336) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:32 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 08 08:03:32 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4732 Ended no 1 0 0
1 DIA 2544 Ended no 1 0 0
2 DIA 412 Ended no 1 0 0
3 DIA 4944 Ended no 1 0 0
4 DIA 2760 Ended no 1 0 0
5 DIA 1004 Ended no 1 0 0
6 UPD 4104 Ended no 1 0 0
7 ENQ 2208 Ended no 1 0 0
8 BTC 3300 Ended no 1 0 0
9 BTC 3312 Ended no 1 0 0
10 BTC 4412 Ended no 1 0 0
11 SPO 4112 Ended no 1 0 0
12 UP2 4336 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 08 08:03:32 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Feb 08 08:03:32 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 08 08:03:32 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:37 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapr3s_T01_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2584) (SOFT_KILL)
Stop icman
killing process (4720) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2584 HANDLE:516)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2584 HANDLE:516)
wait for end of icman
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4720 HANDLE:528)
DpStartStopMsg: send stop message (myname is >sapr3s_T01_00 <)
NiIMyHostName: hostname = 'sapr3s'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Feb 08 09:03:50 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 452 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 452 (pos=2)
SiSelNRemove: removed sock 452
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 452
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4204) [dpxxdisp.c 10317]
Good Bye .....
DEV_W0 file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Feb 08 09:02:42 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.81)
B New connection 0 created
M sysno 00
M sid T01
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 4732
M
M kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4732) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11648 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5320400)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA4830
M DpShMCreate: allocated tm_adm at 000000000DDA4890
M DpShMCreate: allocated wp_ca_adm at 000000000E217030
M DpShMCreate: allocated appc_ca_adm at 000000000E21B680
M DpShMCreate: allocated comm_adm at 000000000E21CDF0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A3A70
M DpShMCreate: allocated gw_adm at 000000000E2A3AF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A3B20
M DpShMCreate: allocated wall_adm at 000000000E2A3B30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 08 09:02:43 2007
M ThInit: running on host sapr3s
M
M Thu Feb 08 09:02:44 2007
M calling db_connect ...
C Thread ID:2008
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 81
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on SAPR3S
C CopyLocalParameters: dbuser is 't01'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapr3s_T01_00 on host sapr3s (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Feb 08 09:02:44 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4732) [dpnttool.c 327]
Please let me know what to do!
Best Regards,
ThomasHi!
Check that all enviroment variables are complete and still in place?
JAVA_HOME and DBMS_TYPE and so on
Also check that all exe files are of the same version, if not, make sure they are.
You could also try to update disp+work
rollo -
I CANT PLAY MY VIDEOS RIGHT AFTER SOME EFFECTS ON THE VIDEO premiere pro cs4
HEY
I can t play videos right after some effects it freeze for like half a second then it stops by its self and I have to enter play again its like a LAG PLEASE HELP I have xp I just bought yesterday with computer and all the requirements are done with higher speed and stronger.Read suggestion in post above. But main problem with that is the video card and disks setup, and XP is not very good choice for CS4 because of the memory limitations. You would be better of with Vista 32 bit or even better 64 Bit system.
-
Video Quality After Transcoding Disappointing In CS4
To All,
I am new to Encore so my situation may be as a result of my ignorance. I have come to appreciate HD video so I purchased a Hauppauge HD PVR to capture programs in HD. I have captured multiple HD video clips in a .mp4 format. I bring those clips into Premier Pro CS4 and when viewing them individually, they look great - crisp, clear video that looks fantastic. Once I have put my video together (consisting of several clips that is about 1 hour long total), I then select Adobe Dynamic Link and send the project to Encore to burn onto a 25GB blu-ray disc. I have tried 2 or 3 different settings in Encore and the result is a video that is 1920 x 1080 full screen but the video quality is disappointing. It's as though a "soft filter" is used in the video effectively taking away the crisp, clean video I see in the original clips I imported into Premier Pro - the very thing I have come to love about HD (ex: beads of sweat on faces, seeing individual strands of hair on someones head, etc.). Am I being unrealistic to expect the same quality video after being transcoded in Encore that I see in the individual clips I originally inported into Premier Pro or I am I just doing something wrong? Thanks for the help in advance!It sounds like you are familiar with Encore. Let me ask this general question. Can one expect to achieve the same video quality after transcoding in Encore as the video originally imported or is some loss inevitable?
Actually, this should answer both questions.
What happens first is that your capture device/card will compress the signal originally. You then Import this footage into PrPro for editing. It will not be edited in it native format, as it is compressed and is also GOP (Group of Pictures) format, i.e. there are not real Frames to edit. These must be created for Frame editing. Now, you're working pretty much in a good replication of your initially compressed files. Here comes the problem: you now wish to Export to a BD. You need to re-compress and Transcode this material in PrPro to a format that can be used on a BD player. A second compression and Transcode will need to take place.
As an example, lets use FAX machines and desktop printers. You create a document in Word and print it out with your 1200 dpi desktop printer. This is a pretty high quality document. It's like the HD TV signal. Next, you run your original document printout through your copy machine. This still looks pretty good, but not up to the original. This is what your capture card has now produced. Then, you take that copy and FAX it to a friend. It now starts to show degradation. This is like that second compression and Transcoding.
Not sure what a better workflow would be for HD TV capture.
Good luck,
Hunt -
I always get an ERROR when I import avi videos in After Effects !!
Hi There
As I said in the title ,,
I always get an error when I import an (avi) video into After Effects CS5.5 ,,
and I don't Know why ,
in other hand I can open the same video I imported it in many media programs like : Windows Media Player-Quike Time-Windows Media Center- Real Player ,, except After Effect !
Although the same Program I used before Formatting the computer ,, but after Formatting the Projects file for Adobe After Effect didn't Open as well !!
The Picture I attached shows the Error ,,
Note:
the question marks in the pictures are for the Arabic name of the avi video ,,and this version of Adobe After Effect CS5.5 is trail ,,
I hope to find a solution for my problem ,,
and I'll Be ThankfulIt worked , both what you said worked ,,
First I placed them on the desktop ,
Second I changed the names of the videos ,,
and both of them worked ,,
thanks a lot for your help ,
Mr. TimeRemapper & Mr. Mylenium
have a good day -
I am having trouble rendering a video in After Effects CS6
I am having trouble rendering a video in After Effects CS6. My video is only 12 seconds long. I am using the "Ray-Trace" feature". Whenever I try to render this video I get this error message.
Also, the text turns into a giant black boxy blob whenever I turn off the Ray-Trace effect.
Somebody please helpThat's a question for the Adobe forums.
-
Problem when exporting movie, video stops after 2 minutes
I set up a Project containing both images and videos. They were all shot using a digital camera (Canon SD400).
When I export the 5 minute movie, around 2 minutes the video freezes, but the music (from an mp3 file) keeps playing. At 2 minutes one of the videos start to play and the video has a little yellow button showing on it in the timeline. None of the other videos have this little yellow button, although I am not convinced that this is the one causing the problem. Here is an image of it:
http://dombovari.com/stuff/imovie.png
Any ideas why the video playback would stop when I export it? It plays fine in iMovie when I preview the project, but when exporting, the video playback stops.
Thanks!I have this very same problem. All 640x480 clips shot with a Canon SD550. iMovie 5 will play back everything fine in iMovie, but once I export the file using H.264 or MPEG-4, the video stops after about 30 seconds (of the 3 and half minutes of the video). The music still plays, but the video has not exported properly (and it shows in the file size).
What WILL work is if you export it to web, but I can't use that. I need it exported at its full quality. (Also will not work, by the way.) But, again, it plays in iMovie just fine. I even tried exporting from the timeline file (with the reference media files) in the iMovie file package—but I get the exact same results.
Quite frustrating considering it works in iMovie just fine. Any other ideas, folks?
System/Software: MacBook Pro 2.0GHz, 1 GB, 256 X1600. Latest Tiger, latest QuickTime, latest iMovie HD. -
Video Playback After 3.1.2 Update
I have recently updated to 3.1.2 and now find that some videos, that played perfectly well before the update, are now pixelated and of a considerably lesser standard.
Is anyone else aware of this issue and is there any way around it?
Thanks in advance.Your suggestion to reset and restore is much appreciated.
However, I wouldn't have labelled the video playback issue a bug before trying something so basic.
To review, just like to person who began this thread, when playing back videos on my 2G iPod touch using OS 3.1.2, any attempt to summon the video controls, after about the first 10 seconds of playback, does not work. The iPod offers no response to any gestures on the screen.
That the iPod's behavior (a) was not observed before the current OS, (b) has been experienced by other users with the same hardware and firmware combination, and (c) continues no matter how many times I reset and restore the device, sounds very much like a bug to me.
My apologies if I offended anyone with the question I posed at the end of my previous post, but it does seem that, in their rush to get stuff out to us, high-visibility glitches like this are becoming more frequent. Perhaps, with our ridiculously high expectations of Apple, we are in part to blame. -
H.264 multi-pass re-encoded video freezes after 10 sec (consistently)
When I take an already encoded H.264/AAC movie and re-encode (to enable the fast-internet streaming option) with the same settings with the "Best Quality (multi-pass)" option enabled, the resulting video freezes after 10 seconds, though the sound continues through the rest of the movie. I have tried this on 3 different movies with the same results. When I change the encoding to "Faster encode (single-pass)", the resulting movie's video frame does NOT freeze at 10 seconds and plays normally. I can reproduce this on any already encoded H.264 movie I wish with the same results.
I have Mac OS X 10.4.8 (PowerPC), 1GB RAM, QT 7.1.3 PRO. I also happen to have DivX 6.2.5 Pro and Flip4Mac 2.1.0.33 Player Pro (though I was not converting anything using those codecs).
Any suggestions? SEEMS to be a QT bug to me... Any one else experiencing this
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAMNo need to jump through all of the re-encoding hoops to enable "fast start".
Open the file (whatever format) and use "Save As".
This will place your file into a .mov "container" but the fast start properties will be restored. -
Video Freezes after Update to 1.1
Video freezes after 20 seconds of play and then resumes with no audio after upgrading to 1.1.
From what I've read, this seems to be a problem when video has been converted using a third party software. It seems at this point, the only way to remedy the situation is to downgrade to 1.0. Here's how to do it without having to restore your ipod:
http://www.digg.com/apple/Howto_downgrade_to_older(iPod)firmware_WITHOUTrestoring
Just as a note, I called applecare and my technician was clueless about the problem. She was telling me to send it in, but I'm fairly certain that this isn't a hardware problem, just a problem with the upgrade, as people on many other forums are reporting it. In that case, you probably won't get much help calling customer service just yet. Hopefully they'll put a fix out for it soon.
sony vaio Windows XPHi,
I had the same problem and downgraded to the lower version. now the video works without any problem, but there seems to be another problem. when I want to eject the ipod from itunes, I get a message, that the iPod cannot be ejected because data on the iPod is currently used by an external program...
any idea...?
Windows XP
UPDATE: AFTER RESTARTING THE PC IT WORKED WITHOUT PROBLEMS!
Maybe you are looking for
-
Error while Invoking Web Service: Fusion Payables( CreateInvoiceInterface)
HI, We are testing the webservice from fusion/em site but encountered with an error 'oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : MOAC Priv Name cannot be null; Initialize MOAC" Details:- Url: Fu
-
KT3 Ultra 2R + Barton 3000+
Hi all.. Hope someone can help. I have a KT3 Ultra 2R board with the following stats: Athlon XP (Barton) 3000+ FSB 166 CPU CoolerMaster HHC-001 heatpipe H/sink with 80mm fan Antec 520W PSU 2 x 100 ATA Maxtor Viper 80Gb HDD's with 8Mb cache each in st
-
Web host recommendations (that works with Mac IMAP Mail)
hi all. i did a lot of research and moved my sites to a HostGator and after going through all this effort i have been finding my sites are being shut down due to an issue where my IMAP email is pinging their servers and when they see 25 pings (or wha
-
Can't drag songs into playlists
I've been trying to create new playlists...and it won't let me! I click on the song, then try to drag it to the new playlist...it won't move. It used to work, what happened?!
-
Can I run a soft without install sql server?
I just wrote a winform C# program and use SQL server 2012 for data. Can I run this program on other machine without install sql server ? If I can't. Are there other program simpler than sql server help me run it ? THANK ALL !