Video display and editing

I use premiere pro cs 6: I'm having trouble when i select a file and review it in the source monitor, I can only see half of the video. The fiel is one, I've already edited and now want to make additional edits, but I can only see the bottom half of the video.

Win Update breaks WMV http://forums.adobe.com/thread/1252244

Similar Messages

I need easy audio and video converting and editing software?

I need easy audio and video converting and editing software that wont cost $400.

I highly recommend you try Video Monkey. It's free, though donations are certainly accepted, and does an excellent job of converting .mov to .wmv. Choose Best (2 Pass) for Encoding Speed and depending upon the size of your original file, uncheck 320 pixels wide to create a larger converted image. I set Quality to "Go Nuts".
Another good commercial program is Video Converter Ultimate for Mac. It works as video converter and editor. The version for 2 Pass conversion is approximately $69. , which is considerably less than the $400+ that Adobe Premiere is asking for its editor. I'd still prefer a freebie though, but there's little choice...

External storage for early 08 mac pro for video storage and editing

Early 08 Mac Pro mod 3.1, 2x Intel 2.8 Quad Core Processors. Bus speed 1.6 Ghz. 10 GB DDR2 FB-Dimm 800 MHz. USB2, Firewire 400, 800. ATI Radeon HD 2600 PCIe 256 mbVRAM. Currently running OS 10.6.8.
I use machine for photo and video storage and editing. I tried using 2x 3TB and 2x1TB HDD internally ( 8 TB total). All are Seagate Barracuda SATA 7200. Experienced constant spinning wheel and lockup requiring manual shutdown. I had upgraded to Lion and to Maverick. Did not help so I did a clean install of primary with Snow Leopard and did not install past 10.6.8. Works now if I don’t exceed 3.5 TB internally. I also discovered that my Disk Permissions experienced voluminous corruption that could not be repaired if I installed Java for Mac OS 10.6 Update 17 as suggested each time I check for software updates.
I need to be able to have a total of about six TBs available in my system for storage and editing of video via Imovie. I don’t know the maximum of HDD storage that can be used in the four internal bays without causing lockup and corruption. If 3.5 TB is about the max, then I would like to have some ability to have external storage via firewire 800 if that would facility fast enough transfer for either video edition and or playback. I don’t know if thunderbolt can be installed via PCI card. I could add a SATA PCI card. However, I assume that would cause the same problem as experienced with 8 TBs installed internally in the four bays.
I would appreciate any suggestions.

olderguy1 wrote:
Do you mean 2x2TB and 2x3TB for a total internal capacity of 10TBs? Are you running Snow Leopard or something else? Actually, I took it to an authorized repair facility who ran checks and said nothing is wrong with the hardware.
Yes, I've got a total of to TB and I'm running Snow Leopard. If your hardware checks out, that pretty much makes it a software problem,,, reinstall the OS?
Does the High Point Technologies SATA3 PCIe connect to eternal drive enclosures or does it somehow connect to drives in some of your four internal bays?
Highpoint makes several RocketRAID 2700 series SATA3 controllers for Mac with external mini-SAS connectors, probably the cleanest/least expensive external hook-up. They also offer a combo internal/external board that (for marketing reasons) is listed as not working for internals with Mac Pro. I believe that this is due to pressure from Apple (who apparently does some business with High Point Tech) but to the best of my knowledge it will. Technically, the "not supported" statement is true since all the internal bays are tied to the motherboard SATA 2 controller, but this can be remedied with a special cable. HOWEVER... the boards are not bootable, so your system disk needs to be on the motherboard controller.
In truth, I bought one of their 8-port "internal only" boards designated for PC only and flashed it so the Mac Pro sees it as a 2722 board, so I have 8 internal ports. I'm not recommending you do the same unless you're pretty geeky, but the 2721 would give you half-and-half or the 2722 would give you 8 external with no mods to the board.

Video FX: video effects and editing drive (incl. RAID disk arrays)

Having had an issue with rendering iMovie effects and read through a few posted thread, I ran an experiment that pinpoints an incompatibility between iMovie and large size (800GB) RAID array volumes. Hence the following questions:
Is iMovie designed to support large sire RAID disk arrays ?
Could anybody test a non-RAID array large size (say 500GB or better 1000GB) volume to check if it is size or RAID dependent ?
When can we expect a fix ?
For more details, please read on.
Reading through the other threads talking about the Quartz composer effects, it sounds like the Apple programmers have a lot of work ahead to deliver a more robust 6.0.2 version.
I wanted to record the noticed incompatibility of working with a project outside the System & Application drive and applying Quartz composer effects.
Most keen videographers are using either a good large size external drive, a RAID array or a separate partition to store their video footage and editing work. So the noticed incompatibility needs to be looked into.
Interestingly, I read of other users having the same problem but Karl Petersen also mentionned that he didn't have the problem ...
So, what's wrong ? If the problem would be consistent, it would be easy to have Apple on their toes to fix it, but if not ...
So I ran a small experiment. I took the same iMovie project and copied it to my different disks and volumes (at least the ones where I had enough space) and tested 3 types of effects:
-1- the non-Quartz Composer 'fast/slow/reverse' effect, which caused me trouble already in iMovie '05;
-2- the Quartz Composer 'sepia tone' effect, which I was using without problem in the previous version;
-3- the non-Quartz Composer 'aged film' effect, which I was using without problem in the previous version;
My disk and volume configuration is the following:
-> First internal 500GB Serial ATA Disk split into 3 partitions:
a) 30GB System & Applications Drive (Start-up Disk);
b) 20GB Pictures Drive;
c) 415.6GB Partition as Slice 1 of my Apple RAID array;
-> Second internal 500GB Serial ATA Disk split into 4 partitions:
d) 15GB Virtual PC System & Applications Drive;
e) 15GB MAC & PC Documents Drive;
f) 20GB Musics Drive;
g) 415.6GB Partition as Slice 2 of my Apple RAID array;
-> Internal 831.3GB Apple RAID Array - striped RAID set made of 2 slices (volumes c and g above);
-> External 120GB FireWire Disk in one volume.
All volumes are formated using Mac OS Extended (Journaled) format.
The result is consistent and points towards an incompatibility of iMovie with either very large size volume or RAID array. Indeed, all tested effects preview fine on all tested volumes, however, they can be applied seemlessly on all tested volumes apart for my large size RAID array.
When the project is on the RAID array, hitting the apply button results in the following:
For the non-Quartz Composer 'fast/slow/reverse' effect and the Quartz Composer 'sepia tone' effect, rendering starts but then stops a fraction of a second later (as if it was unable to write the rendered file to disk). Resulting image in the video viewer is shifted diagonally to leave a black corner on the bottom-left.
For the non-Quartz Composer 'aged film' effect, rendering starts and proceeds but the resulting image in the video viewer is again shifted diagonally to leave a black corner on the bottom-left. Note that resizing the iMovie window corrects this viewer issue.
Conclusion:
Is iMovie designed to support large sire RAID disk arrays ?
Could anybody test a non-RAID array large size (say 500GB or better 1000GB) volume to check if it is size or RAID dependent ?
When can we expect a fix ?
Regards,
Alex

I had the same problem rendering a movie with iMovie 6 when the file is placed on a second internal disk.
Clicking the 'Ignore ownership on this volume' tick box is a solution but I find it too blunt. My Mac is configured as a multiuser system and I bought the second internal disk to use it for my /Users directory. I thus don't want the different users to be able to create files in each others directories.
When unclicking the 'Ignore ownership on this volume' tick box again I'm surprised to find that rendering still works fine for all users with the desired file integrity.
I would have preferred to set up all the permissions using unix commands instead of all this magic. Can anyone explain the proper way to configure the correct permissions using the Terminal?
Power Mac G5 DP 1.8GHz Mac OS X (10.4.5)

VIDEO CONVERSION AND EDITING SOFTWARE

I have recorded lots of INTERESTING videos while working as lifeguard this summer. Most of them are just 3 minutes raw AVIs of about 100MB in size. Because my digital cam does not have any built-in compression they are huge in size. I am looking for some Video Conversion and Editing software which allows me to convert them to some other format or at least let me encode them with some nice video codecs. I would like to put them on my web site. I promise I will post a link to those video here if you guys help me out with some free or Borrowed software.

Nice find!!!
It has some interesting cyber fun software. It might just be my perception but the site seems to have a lot more than just video formatting tools.
Check out following links

Video creating and editing software

Does anyone have any good suggestions for video creating and editing software. I'm talkin about taking videos from my digital camera and insering them, adding music over the top, maybe some cool transition effects. I don't think that imovie will do it???

Hi
I don't see why iMovie shouldn't, ask the people in the iMovie Forum:
http://discussions.apple.com/category.jspa?categoryID=141
Steve

Mega simple video capture and edit program. Cross platform.

Looking for a mega simple video capture and edit program. Am overseeing a bunch of small groups where we want each person in the group's story told. Some groups will have Macs, some PCs, some iPads, iphones, etc. So needs to be cross platform.
Really, the simpler, the better. Like targeting 5 year olds

Is there any software anyone recommends - Sorenson?
I am capturing regular dv from minidv.

Problems displaying and editing long documents on small pages sizes

Problems displaying and editing long documents on small page sizes
I read this problem have called with the helpdesk they didn't know the solution but how can I find the solution:
In Pages 09, I can't scroll down andand click on text to edit it!! All the mouse will do is draw gray transparentboxes and not place the cursor in the text. Again, like the display problem, itdoesn't happen at the beginning of the doc, but starts showing up around 50 to60 pages in ... I can't select text at the bottom of pages ... at 50 pages, thecursor can be clicked into anyplace on a page. Further and further down, the unselectablearea on any particular page creeps up from the bottom line by line: at 175pages in the unselectable area is 12 lines high; at 360 pages in theunselectable area is 25 lines high. and finally at around 440 pages down, Icannot place the cursor anywhere on any page all the way to the end of thedocument.
I have Page versie 4.1

What you get was described here several times.
As we are end users like you, we can't change the app behavior.
Under 10.6.8 you have the buttons allowing you to scroll one line up or one line down.
Under Lion they are no longer available.
Yvan KOENIG (VALLAURIS, France) jeudi 18 août 2011 17:53:12
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Form load rules are not working on display and edit forms

Hi
I have customized SharePoint 2013 list form using InfoPath 2013. I want to hide certain fields based on user group. I created rules on form load for that. These rules are working fine on New Form but are not working on display and edit form.
What can I do?

It could be because the value might have not changed ie, you might be checking for a particular value, the values might have got overwritten when the new form is saved, see if that value is blank or overwritten in display and edit forms.
I would first check the form load rules and check those values again in Display form and edit form, if the values are not getting cleared/overwritten.
It would be better if you could upload the screenprint.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Display and Edit Patterns in XML Tags

Using LiveCycle E2 V9.
The display and or Edit Patterns are not reflected in the XML of a submitted form.
While these display properly on the Adobe form on-screen, e.g.
$150,000.00 when the fields are are submitted the XML tag as reflects 150000.000000
Please advise whether there is something that I am doing incorrectly and or a fix for this?
Thank you!

Formatted displays for numbers is never the same as the actual field value. This approach allows a user to see a formatted numeric value but the data remains as a number in floating point, integer, or binary value for further calculations as a number. If this were to change, then one would need to parse the numeric value as a character string back to a numeric value before performing any calculation.
There are specific forums for LiveCycle Designer.

Need advice on video download and edit

I need to download and edit video, have not done it before. My Mac is a PowerBook G4 from 2005. The videocamera I have is a Sony GL2 digital which uses a mini DV cassette. I have a cable, a 4-pin DV to 6-pin firewire. What software do I need? (Currently I have only graphics apps, Adobe CS2, Dreamweaver, Flash, Quark.) The type of editing I need to do initially is cut out crap scenes, piece together good scenes, and export mpeg clips. I do not have a DVD writer on this Mac. I love Adobe products but I can't spring for Premiere right now.

iMovie came with the computer. Capture and cut away.
You'll need an external DVD burner if you want to output stuff. iDVD will allow you to burn the video to disk.
x

Cut audio from a video file and edit in an audio editor?

Using Pre 9 and a Nikon D7000 video file: Is it possible to cut the audio portion of a movie clip (where the audio was recorded in the camera and is part of the import), edit in an audio editor (I like Sony Sound Forge Studio), then paste it back into the clip?

I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
Good luck, and happy editing,
Hunt

Video download and editing

Is there an app that you can dowload videos and edit them? For example: I download a 10 min video but only want to text/email a small portion of it. Thanks

Check out iMovie.

Video shot and edited ENTIRELY on the iPhone 4

Here are a few videos from my vacation shot and edited ENTIRELY on the iPhone 4 using iMovie for iPhone. Enjoy! comments welcome
In Springfield, Ma visiting family
http://www.youtube.com/watch?v=xvG9mnAeGMk
Here we are in NYC on our way home
http://www.youtube.com/watch?v=DrHbqhcWcJo

squarejp wrote:
It's a good multimedia device but a lousy phone.
Don't be clouded by other non phone features guys.
did the OP ask for your opinion about phone issues? nice going
debbie downer.
btw, nicely done video Jondjames!!

Apple Macbook Pro contrast dark! Videos unwatchable and editing pictures pointless!

Hello. I have had my 13' Macbook Pro since Sept 2011 and have always had this problem but recently it has been so annoying! I have seen a number of other people with this problem but am unable to find a solution. The colours are fantastic on the screen and the brightness is at its maximum however... but still, any dark colours on photographs, films or online videos are all so dark and which makes them unwatchable or extremely hard to make out.
When I watch a DVD, I have to change the contrast on the DVD menu so I can see the video (night scenes are impossible to watch as everything is so dark), but watching online videos is hard because I am not able to lighten the contrast on my laptop to make it better. I realised this was a problem when I printed some pictures off... On my Apple, if there are dark colours, they are very dark and once again hard to see (subtle shadows are just black). I have to change the shadowing in the settings to make them better. The colours come out fine on my rubbish £300 quid notebook and so far i'm using that over my apple which is such a shame.
I have tried chnaging the colours on the calabriator but it's really hard to get them right. Although I can make the contrast brigher on it, it seems to wash out the colour in everything else. I compared my Macbook pro colours with my friends Macbook and the contrast/dark shadows are the exact same. Is it something to do with the retina display? Or is it because I have Snow Leopard? I have no idea... Either way I really want my screen to be normal so I can watch films without changing the settings, edit my photographs without using other laptops and enjoy my netflix subscription without dreading dark scenes :-(
Thank you.

I also have the same problem. It shuts down while I'm working on it, and when I put it to sleep it shuts down instead and I lose everything I've worked hours for.
I took it to Apple yesterday, and the customer service they gave me is unparalleled!
In a nutshell, this is what they told me: https://discussions.apple.com/thread/4822886?tstart=0
Seems to be a common bug. :| :| :|

Video display and editing

Similar Messages

Maybe you are looking for