Video Dissappears

Whenever I am watching a video on the external viewer, I have a problem where the video disappears when i move the mouse pointer in the field such as to adjust the controls. Anybody else having this problem or solutions needed.

hi there,
i don{t have an answer but am having problems with my video as well.
i just downloaded itunes and when i try to play podcasts videos the audio works but there is only a green square where the video should be. do you have any ideas?

Similar Messages

Posterize time + time remapping makes video dissappear

I am trying to duplicate an effect I've used on an avid system, speeding up video then strobing it. I've been using the time remapping to adjust the speed then applying a posterize time effect to achieve the "strobe" look. Half the time it works great, the other half as soon as I put the posterize time effect on the clip (without even adjusting the values), the video dissappears. Changing the time rate doesn't seem to make a difference...happens on clips of varying lengths...no real consistency to when it will do this.

The CC warp stabilizer works way better than iMovie's, has many more options, and will stabilize shots that iMovie can't deal with effectively.
The proper production workflow is to stabilize, render or pre-compose and then time remap. You can do all of this without the render by simply applying warp stabilize to a layer, pre-composing the layer, then applying time remapping to the pre-comp.
The solution to something not working when you try and apply multiple effects to a single layer is almost always apply the first effect (warp stabilizer) and then pre-compose and apply the other effects. That's how you apply a mask or an effect to a ray traced 3D layer. That's how you stabilize and time remap.

Video Dissappears when I refresh assest

This has happened several times and I am wondering if anyone else has had a similar experience and may know a solution. When I create a project in DVDSP and then go back to make a revision to the video, I re-compress the files with the same name. DVDSP does an asset refresh but the video does not play and the track icon in the inspector doesn't show any video. If open the .m2v files in another player (other than DVDSP) they play just fine. From this point forward, however, I can not re-import that particular video file without it showing up like this.
Any ideas?

See my post here: http://discussions.apple.com/message.jspa?messageID=9788507#9788507

With ios 7.03 I cannot expand youtube videos to screen size but get white blanks all around the stream

since the update to ios 7.0.3 I cannot expand Youtube videos to screen size - instead, the features around the video dissappear and are replaced by white fields. With my ipad mini I do not have that problem.
Does anybody know advice?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

Why are sections of my video exporting as a bright red screen?

I am using adobe elements for the first time on my macbook pro.
I have been editing a .mov file which was recorded on my canon powershot sx40.
The editing went very smoothly and everything played fine whilst editing, no rendering indications, etc as it was a very simple edit.
However, when I exported the movie, both to a quicktime movie, and to a dvd, sections of my video dissappeared and were replaced by a bright red screen.
I have no idea why this is happening or how to rectify it. Has anyone experienced this before? Any suggestions?

lucydawson84
What you are seeing in Edit Menu/Project Settings/General is perfectly normal. So is the what you are seeing for Edit menu/Project Settings/Capture and Video Render there. So, I am not sure where Hunt is coming from with the HDV comment.
I have looked at a sample of video from your brand/model camera via a QuickTime export and do not see the problem that you describe. The sample video is
1280 x 720
29.97 frames per second
AVCHD video compression with a .mp4 file extension.
I used the Premiere Elements 11 project preset of NTSC AVCHD AVCHD LITE 720p30 which appears to be what you or the program selected as well.
Consider creating a new project with the same NTSC AVCHD AVCHD LITE 720p30 project preset and importing only a video clip. Do nothing to the video clip and export it to a H.264.mov file saved to the hard drive. Determine if the red areas appear in this video.
What did you do with the Bitrate Settings? Leave without check mark or with check mark and filled in bitrate in kbps (kilobits per second)?
We will be watching for your follow up. I will look at the DVD-VIDEO side of this later.
Thanks.
ATR

ITunes corrupted music on iPod touch

I connected my 32GB iPod touch to the computer this morning and found that it immediately corrupted all the music on the ipod and made it inaccessible.
The normal screen came up to do the sync, but then the "Capacity" display showed 15GB classified as "other" (there are approx 15GB of music) on the device. On the device itself, when I tried to access music, it stated "No music". Attempting to re-sync failed as it said there was insufficient space on the iPod to store all the music (as it is just over half full).
I'm currently having to do a restore.
Has anyone else had this problem? I'm running iTunes 7.7 and v 2.0 of the firmware.

Hello,
I bought my iPod Touchy (because it is very touchy these days), 32G on June 12, and it was quite stable, a few crashes, but nothing serious until I installed iPhone 2.0, and I was very enthusiastic about the new App store, I purchased about a dozen apps, and installed a lot of free apps as well.
I have observed that the crash where all the music and videos go "poof", happens shortly after installing some new apps, or updating new apps. It starts with some apps, quitting a few seconds of touching their icons on the springboard. At one time, I shut down my iPod and rebooted it, and everything seemed OK. However, on Tuesday, three days later, I added a few more apps, and went to try them, and some apps crashed, and I rebooted again, and it did nothing to help. After rebooting, ALL the apps did not work and all the music and videos dissappeared. I was very cross after that. I spent the whole afternoon, restoring, my Ipod and it took at least 3 hours to get it back on its feet.
The problem seems to come from some DRM manager within the ipod that either crashes, or gets corrupted somehow upon sync with iTunes, which causes the music and videos to dissappear. I have an iPod Nano, and had instances when my purchased music wouldn't play, and had to resync to get it to play again. However for the iPod touch resync doesn't help, and a complete restore is the only solution.

Question, I need help please

On my Macbook pro I use Microspft Office for Mac and I have several Powerpoint presentations which include short video clips.
These play perfectly on the Macbook but when I connect to the big TV display using the VGA connector the video dissappears off both the MacBook and the TV and I am left with only the soundtrack. If I then disconnect the VGA plug the Macbook has
still lost the video and I have to reboot to get it back.
I assume there is a setting I need to adjust but don't know what I'm looking for.
Can anyone please advise me?
Thank you
Johnny 55

I think before you start the PP presentation you need to connect the second display (TV), go into the Sys Preferences/Displays and make sure that display is being seen and that the resolution is correct. you will more then likely also set it to Mirrored so the same thing shows on both screens. Once you have that working then start the PP Presentation.
You can also check off "Show displays in menu bar". That way you have quick access to the display settings window.
I think your problem comes up when you connect the display (TV) after the presentation has started without first making sure the resolution is correct and that it is set to the mirror mode.

Why can I not get a video downloader?? They dissappear and or don't show up after selecting them fromthe add on page??

I had a simple easy downloader on my fox page it left a green arrow on the bar for downloads, all I needed to do was click on it and pick the type i wanted (mp3 or flv etc) but youtube was giving me ahard time when I tryed to download more then one video, I would get all the same ones as the first one, so i tryed a different downloader it showed a video reel as it's symbol and it seemed to work but then I accedently clicked on something and it dissapeared. Now whenever i go to the add-ons to get one it says I's been done succsessfully but doesn't show up once I get back to my home page???Can you help fix this issue please!!

I good video downloading software that I recommend and use, is the [http://www.freemake.com/free_video_downloader/ Freemake Video Downloader]. It is free and comes with a Firefox add-on.
I use it to download my friends' YouTube videos.
NOTE: This program is NOT to be used for piracy or other illegal activities.
WARNING: Always use caution when downloading content from the internet. I will take no responsibility for any damage caused by a download. Download at your own risk!

My music, videos, and ringtones dissappeared!!!

So I was listening to my IPhone one morning and it was working fine. Then I was at school and was listening to it also with no problems, this was like 2hrs later. I turn the phone off like i always do and went on with my normal day. long story short I went to play my music later on in the day around 4:00, and all my music, videos, ringtones, and playlist were gone. There was no sign that they were ever there. I know that you all cant fix this problem, but did this happen to anyone else, or know why this may have happened? this happened to me March 20,2008. My phone is only 3 months old.

I ended up restoring my phone and loosing some old aps. Now all media syncs and my long ringtone works.

Video controls dissappear when swf is put on web

I've got a simple SWF file that points to an flv on our
website. When I test the file on my machine it plays fine, with the
controls underneath. When I upload the swf to our website and play
it from there the controls disappear.
I've even tried publishing an html page that only has the SWF
file on it and uploading that. Again, it plays fine when I open the
html file from my machine, but as soon as it's on the website and I
navigate to it, no controls. The video plays fine, but I would
really like the controls to be there.

Nevermind. I figured out what the problem was myself.
Apparently when you use one of the default video control skins it
makes a second .swf file that contains the controls, which has to
be in the same directory or you can point to a URL where it's
located.

Videos keep downloading even after closing Firefox.

Hello, I just signed in because I have a weird issue, so this is my first post here:
Recently I noticed my internet connection suddenly was getting very slow, I thought it was some problem with my internet provider but the problem was getting very frequent. I use a program (Win7 gadget) that helps me monitor my internet traffic, access and usage, and I noticed all my bandwidth was being used even if I had all programs closed. A couple of days later I discovered that each time I opened a streaming video from any site (not just YouTube), the problem was there, so everytime I watch a video I have to wait for it to load completely, even if I close the tab or the browser.
I don't have the slightest idea how this problem started, I'm very careful about the software I install in my PC. I've searched all over the web trying to find a solution but to no avail, it seems a lot of other users have the same issue but with some variants: some people blame it on BitDefender, other people blame it to using other browsers, etc. but I haven't found a solution yet.
Now, watching videos is a big part of my internet experience, even YouTube is my homepage, and I sometimes like to watch very long videos (20+ min.), so you can tell this problem ruins a big part of my web usage. Let's say I open a video with a 3:00 minutes length, I watch like 20 seconds of it and then I decideo to close it, now I must wait the whole three minutes for the video to stop buffering to be able to watch another one (or to do anything web related for that matter) or surf the web at the pace of a snail until the video stops loading.
The solutions I've tried so far are:
Disabling all antivirus options in BitDefender 2012.
Disabling and enabling again the network adapter.
Uninstalling my monitoring programs (Windows 7 gadgets).
Updating Flash Player to the latest version.
Trying to tweak the various Flash Player options found in Control Panel (a.k.a. Global Settings).
Trying to tweak the Flash Player Settings found by right clicking on a video.
Another thing I noted is that if I try to find which program is accessing the internet with the Resource Monitor that comes with Windows 7, there's none. Let's say that I open a video, I check the Resource Monitor and there I can find Firefox is accessing internet as expected, then I close Firefox, the program dissappears from the Resource Monitor (again, as expected) but the bandwidth is still being accessed at full. I have a very slow connection (2 Mb), so you can tell how this becomes a problem for me.
I'm not sure how or when the problem started, and I'm reluctant to do a System Resore because there seems none of the programs affected have nothing to do with my issue, and I'd lose some other stuff I've configured on my PC and want to keep.
Well, that's all I have to say, thank you for reading and I really hope you can come with a solution, cya!
Here are my specs:
Windows 7, 64-bit
Firefox, ver. 17.0.1
Adobe Flash Player, ver. 11.5.502.135
(PS: While writing my specs, I was just wondering if it was a problem with Firefox, which updates quite frequently... go figure.)

What? No replies? Anyone?
Well, I just wanted to add that the problem seems to be with Firefox. I tried opening videos with Internet Explorer 9 and they stopped buffering the moment I closed their tabs or closed the browser, so I downgraded Firefox from ver. 17.0.1 to ver. 16.0.2 and I thought the problem was solved, the videos stopped downloading as soon as I closed them, but the next time I opened Firefox the problem was there again...
BTW, I've already ran a full system antivirus scan, but my PC is clean. I've also tried disabling Greasemonkey and all its scripts.
Please, help me if you can!

Video's removed from iPhone and will no longer Sync

I have recently purchased an iPhone 3G and have been setting it up over the last few days.
I eventually discovered that I can convert videos from my old phone to .mp4 format, added them to iTunes and sync'd with teh iPhone and was able to view them on my iPhone with full sound and colour, all good...
However I have just tried adding some more and found that all the video's i had previously sync'd have dissappeared from my iPhone, and iTunes will no longer allow me to sync them back to the phone.
I do not get an error message, and it appears when i drag and drop the files to the attached device, that it is ok, and then nothing happens.
Can anyone tell me why these video's will no longer appear on my iPhone.
KR
Rosseroony
"Life is an occasion, rise to it"

Not really very helpful, was looking for some hint and tips to get round something of that nature, if indeed it is...
However, as i stated before, the video's were transfered before, and worked, and then removed and will no longer transfer?

30gig 5th generation video ipod and windows vista

i've been reading alot of posts putting vista down in reguards to the video ipod . i just wanted to say that i have window's vista home premium and my first video ipod
30gig and i've not had a single problem related to vista.
any problems have been to me never having owned an ipod .
just thought i'd set the record straight for those who are thinking of getting a video ipod and already have vista .
you know , just fyi .
but i am wondering , how well does the ipod record notes ?
and anyone here in a band and tape their rehearsals ? was wondering how it sounds . thanks all !

after I watched them they dissappeared from my ipod,
Sounds like you have selected to only sync unwatched video content to your iPod.
This is a setting that you can change in your iTunes preferences.
Have a look through this:
http://docs.info.apple.com/article.html?artnum=304680

HDV Print to Video, My Settings

I've seen several posts here about problems getting Print To Video to work with HDV. I just did this and the results were great. So, at the risk of being redundant, I'm going to post what I did.
Camera: Sony FX1, captured using the camera over Firewire.
Captured into FCP using Easy Setup HDV 1080i60
All the footage was nighttime fast action sports.
In the sequence I slowed almost all the footage down to 33.33%, with Frame Blending turned on.
No dissolves, all simple cuts.
No other filters, motion, overlays, graphics, etc.
Sony FX1 Menu Settings:
IN/OUT REC
VCR HDV/DV > AUTO
REC MODE > SP
COMPONENT > 1080i/48Oi
iLINK CONV > OFF
TV TYPE > 16:9
A/V TO D/V OUT > OFF
Final Cut Pro Settings: (as viewed from MENU>FINAL CUT PRO>AUDIO VIDEO SETTINGS...
Summary Tab
Sequence Preset: HDV - 1080i60
Capture Preset: HDV
Device Control: Sony HDV Firewire
Video Playback: None
Audio Playback: None
Sequence Presets Tab
HDV - 1080i60
Capture Presets Tab
HDV
Device Control Tab
Sony HDV Firewire
A/V Devices Tab
Playback Output
Video: None
Audio: Default
"CHECKED" Different Output for Edit to Tape/Print to Video
Video: HDV (1440 x 1080) 30 fps
"CHECKED" Mirror on Desktop
Audio: Default
"NOT CHECKED" Do not show External A/V ...
"NOT CHECKED" Do no show warning ...
Before you Print To Video, make sure you have the Sequence in the Timeline selected. Otherwise you might get an error message. Also, make sure the Camera has a tape and its sitting at the spot you want to print to. (FCP will control the camera)
Then I choose: MENU>FILE>PRINT TO VIDEO ...
Leader: Nothing checked here
Media: Print In to Out (which was set on the Timeline) nothing else checked
Trailer: "CHECKED" Black 5 seconds
"CHECKED" Automatically Start Recording
After you click OK, your sequence will most likely go through a Conforming process, which conforms the sequence as required for HDV. (different from a render) Then the screen will go black, and you can click OK, FCP will cue up the camera, put it in record mode and start the print. (export)
One note: I thought I had also checked MENU>VIEW>EXTERNAL VIDEO>ALL FRAMES. However, when I was done, I checked this menu again and it was set to OFF. So, to be honest I don't know if I did check it and it went back to off, or it was not in fact checked. (lots of messing around prior to getting it to work, sorry)

wish I could get it to work consistantly for my GR-HD1 from JVC. terrible that one of the first cameras on the market isn't fully supported by FCP5.
I have to fiddle around endlessly to get the camera recognised. Usually in Camera mode and then quickly switch the Cam back to VCR mode after FCP recognizes it.
The people at the Sony Store here in San Francisco are so rude and ignorant that I will die before buying a camera from them. I went in to buy 3 cameras for my company a month ago and couldn't get any service. The only one paying attention to me was the security guard who kept coming over to tell me that I couldn't touch the camera in the display. I asked the sales staff I finally got to help me a question about the HDV cameras, and he just dissappeared. Never to return. Eff them.
I will stick to JVC even if it means changing my shop over to PCs. Which has been happening a lot around me lately. Video production people fed up with Apple refusing to support equipement. PC software is fully compliant to the entire spectrum of video out there. The blessings of being an open format I guess.
But, I love my G5 and would miss it.

Making custom buttons dissappear when not selected

I am trying to get around the limitiation of not being able to add audio to a layered menu item.
Correct me if I am wrong but I think if I create my own buttons (that would reflect the same look as the active layers of the Photoshop file) then I could have audio in the Menu with the same look using the buttons I create.
Here is my question ... Is it possible to have a button dissappear when its not in the "activated" or "selected" state? I figure that I can create the button to look like the same active state and have the normal state revealed in the background graphic when the button is deselected. I just don't know how to make the button invisible or transparent when its not "selected" or "activated"
Thanks in advance
Lou ..

Yes use overlays for the buttons and do not highlight them in normal state (though you may consider having something showing for normal state so people know it is there as oppossed to totally not visibale)
Some examples and techniques showing mapping and then some others with video backgrounds also
http://dvdstepbystep.com/newmap.php
http://dvdstepbystep.com/rollover.php
http://dvdstepbystep.com/useelements.php
http://dvdstepbystep.com/buttons07.php
http://dvdstepbystep.com/motion.php

Video Dissappears

Similar Messages

Maybe you are looking for