Video does not cover whole screen

hi
i downloaded a video clip (MP4 360p) from Youtube
when i edit it in PrE 10, its height is OK, but the width is too small and therefore to the left and to the right there are black vertical stripes. Magnification is set to "Fit". If i set magnification to 75% or 100% then the video covers the whole screen but at the expense of resolution.
is there any way to stretch the screen widthwise while leaving the height the same?

Unfortunately, that odd Video Frame Size will not be matched by any PrE Project Preset (only standard Video Frame Sizes and FPS), so there are basically two options, with one variation:
One can choose the smallest Frame Size Projet Preset, which will be 720 x 480 (NTSC), and Import that footage into that. You will still get black bars, and you can live with those, or you can do a treatment, as is outlined in this article: http://forums.adobe.com/message/2471303#2471303 Basically you would create a PiP (Picture in Picture) of that YouTube footage, with an "abstract background" around it. Even doing that PiP treatment with a gray, or perhaps beige Color Matte, will be more pleasing than the black bars.
Or, you can follow the same workflow, but then Scale UP the YouTube footage to fill the Frame Size. Note: when Scaling, and especially with Scaling UP, the quality will deteriorate. How much depends on the degree of Up Scaling. As you are starting with YouTube footage, to begin with, it probably isn't the highest quality to begin with, but only you will be able to tell if the quality loss is too great.
Good luck,
Hunt

Similar Messages

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Bad video card, call Apple, get a case number and return it.

Adobe TV - Video Does Not Play (Black Screen!) OSX 10.6.8

I cannot get the Adobe TV videos to play. Only a black screen.
I use Mac OSX 10.6.8 and have the recent Flash player installed (11.5.502.146). I tried to troubleshoot on Firefox, Chrome and Safari.
I tried to apply all the settings that some used to get it to work through here but no go.
http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager03.html
I need to learn this software or I have to get a refund.
THANKS!

Checking "Allow third-party Flash Content to store data on your computer" didn't help?
- No, it didn't.
Do you find that website flash settings, like volume levels in youtube, are always reset for you?
- No, the volume is set to full, I just checked with couple of videos.
You might want to reset your Flash Player settings entirely to see if that helps.
- Do you mean "Delete All" data in the Flash Player setting in System Preferences. If so, I did this as well and no go.
What else can it be?

Not cover the screen?

There is a light gray spot on the center of the screen
Agent says that the warranty does not cover the screen?

The warranty covers defects in manufacture/assembly/design. It does not cover abuse, accidental damage or user caused damage. From you description I have no idea of the case of the spot.

TS4085 the image does not fill entire screen of iPad, therefore not the entire TV screen. Why?

When I try to mirror a video from my iPad to TV using Apple TV, the video does not fill entire screen of iPad nor the entire screen of my TV, Is there a way to strech the image to fit screen(s)?

Welcome to the Apple Community.
There are two factors in play here. Firstly the iPad screen is 4:3, your TV is 16:9, so when mirroring the mirrored iPad screen is never going to fill the TV screen. If on top of that, whatever you are watching doesn't fill the iPad screen then that too will be reflected in what is seen in the mirrored image.
You cannot stretch this using the Apple TV or iPad controls, but your TV may have a setting you can use. Generally speaking though this will distort the image and you would likely be best leaving it alone.

I had an accident with my ipod. i did not know that; nowadays, the warranty does not cover my ipod if the screen is cracked. but now the battery is not working. the warranty does help me for something??

i want help, not the same comments that i will not be helped. i admit my fault as the owner that i had the accident, but i believed that i was secured with my warranty. otherwise i would ha decided to do not have it if i was going to be the one paying to be fixed... how can i still trust Aplee Corp if the are not helping me with a devise that i paid the price that they decided giving me a warranty to be sure that i am secure while i use my devise. now i would like to know if i can have a refund of the warranty because i am looking for a different way to fix it because i have to pay and pay. but i paid for this situation and i had such assintance leaving me aside telling me that i am hopeless and also that i have to pay more and more.
ir does not work like that. i feel bad being treated like that.

angelferuz wrote:
nowdays, the warranty does not cover my iPod if the screen is cracked.
It never - ever has. The manufacturer's warranty covers you against faults due to manufacturing. (So if the screen did crack due to a manufacturing defect, Apple warranty would cover it, BUT - Apple would be aware and would be able to identify the cause of a cracked screen due to manufacturing defects, so ...)
Since you did not want comments telling you what you don't want to hear, you should condsider yourself lucky that you have any replies to this post. Sometimes, the truth hurts.

Is it possible to glue a protective film on the screen? Not hurt does it cover the screen

Is it possible to glue a protective film on the screen? Not hurt does it cover the screen?

You should only use Screen Protectors like these: https://www.belkin.com/au/IWCatSectionView.process?Section_Id=211415.
That are made for the iPad. If you glue something to the screen you will damage the screen when you remove the item.
This is a link to the Wikipedia article on what the Oleophobic coating on the screen is: http://en.wikipedia.org/wiki/Lipophobicity.
I can't determine what the effect would be using a screen protector. If you glued something to the screen, you would surely remove this coating though.
Some one else in the forum may have more insight into the matter.

Video does not work in iOS 8.3

I have the iPhone 6 128GB. I did update to iOS 8.3.
I have some problems after the update... video does not work, it wont play, i can click on the play button but nothing happens.
The problem ocurs in safari when i visit news sites and try to play video in articles.
When i get snapchat with video... it wont play, it is only black screen with the seconds counting down... and some times it just craches the snap app...
I cant watch videos in instagram or facebook...
I live in Norway and I think it is stupid that Apple still has not fixed the keyboard... the "123" key and the "globe" key swithc place with each other in portrait and landscape mode... why...!?! ( this is when i use Norwegian keyboard )
Yes i have rebooted the phone holding in both buttons until apple logo is visible 2 times
Yes i have rebooted the phone even more
Yes i have quitted the apps that was open and the only way i get the black screen away in snapchat is by killing the App...
Apple... i am not impressed.

Here is the strangest thing, what works for you does not necessarily help other. I rebooted my phone several times, and yes, youtube finally worked, but only for some hours then it did not work. I did quit all Apps and rebooted with home and power button pressed inn until apple logo appeared and disappeared again, i had to press power to start the phone. I repeated this step. Now the videos where playing in all apps. The next morning i did get a snap on my iPhone, i tried to see it, but it was only black screen with text and a clock counted down to 0, but it stopped on 1... and the app froze.
I dubble clicked the home button, and there where 25 active apps, apps that i had not used for days and note... i manually quitted all apps the day before... how did this apps appear again ? The Apps that where terminated do appear again after reboot... i don't know why, i have still trouble to see video. I hope for a fix from Apple, because i have so much i don't want to loose in my phone.

Exported Video Does Not Look Right

I am sure this is a basic setting I am overlooking, but a lot of this is new to me - any help would be GREATLY appreciated.
My goal is to create a high quality 640x480 movie for Computer/Web viewing only.
• I shot a short video using a Canon Vixia HV30 to mini DV tape using the SD standard - no problem. I guess that records at 720x480 non-square pixels at 29.97fps - is that right?
• I used log and capture inside of FCP v6.0.5 to capture the various clips I needed - no problem (I don't think). If I open each of those clips from the finder in Quicktime they look "pretty" good, but a bit of aliasing on the diagonals and somewhat blurry, but not sure why? Everything looks sharp on the smaller camera LCD screen? and looks pretty good inside of FCP on the Canvas? If I open one of these captures directly inside of Quicktime and do a get info, it says...
DV 720x480 (640x480)
FPS: 29.95
Normal Size: 640x480 pixels
Current Size: 640x480 pixels (Actual)
All these Quicktime movies appear slightly larger in height and width than the same clips when viewed in the FCP Canvas?
If I open the Sequence Settings in FCP it says...
Frame Size 720 x 480 NTSC DV (3:2)
Pixel Aspect Ratio NTSC - CCIR 601 /DV (720x480)
Field Dominance: None
Editing Timebase: 29.97
Everything looked pretty good inside FCP so I Exported a QT Movie using "Current Settings". Then opened the resulting self-contained movie in QT and it looks pretty bad. When I get info in QT on the rendered final movie it reads...
DV 720x480 (640x480)
FPS: 29.97
Normal Size: 720x480 pixels
Current Size: 640x480 pixels (Actual)
So... the FPS and the Normal Size are not the same as the captured original clips.
Can anyone tell me what I am doing wrong?
Is this just the wrong Sequence Settings, Export Settings or do I have to start over an re-capture all my footage some other way?
PS - I am assuming that the DV Camcorder is recording interlaced (60 fields) rather than progressive - is that right. Do I need to de-interlace the video somehow?
Message was edited by: ChoreoGraphics

I'm far from being an expert, but since no one has replied to you yet, and because I've been helped out here plenty of times, I'll post something and who knows -- it may be the answer.
Your post was really long but from what I can gather, you're wondering why your exported video does not look good when you open it in QuickTime. Try this: Open the video in QT, hit command-J, then click on Video Track, then at the bottom right (under Visual Settings) you'll see High Quality, Single Field, and Deinterlace. Click around on those to see if that improves what you see.

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Does AppleCare cover shattered screens?

Does Apple Care covered shattered screens?

No, the basic warranty does not cover any accidental damage, damage from abuse or mis-use. The normal AppleCare extended warranty also does not cover such events.
If you have AppleCare+ you do have two accidental damage claims, for (I think) $79.00 a claim now? But only AppleCare+ includes any accidental damage coverage.

My ipodmy ipod shuffle 4th gen does not play whole songs, only parts then goes on to next song

My recently bought ipod shuffle 4th gen does not play whole songs synced to it, only the beginning then goes on to the next song. What have I done wrong?

I changed the iPod to Disk mode and it just blinks orange while it is connected to the PC. It says that it is synched on the PC screen but I thought the blinking orange light means that it isn't. I took it back out of disk mode. The original problem still exists...when I turn it on, the green light stays lit for 5 seconds then there's no light at all....when I press play the lights alternate orange and green indicating no music is loaded which is wrong since it shows all my songs that are loaded when it is connected to my PC. What a mess.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

Video does not Work in iTunes Store please help! annoying problem!

The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?

I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video.

Video does not display when sending from Final Cut Pro to Motion

Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
Additionally, when rendering the Motion file back in FCP, it turns in to black video.
I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
Help, please?

Do you have Motion mistakenly set to render out with an Alpha channel?
Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

Video does not cover whole screen

Similar Messages

Maybe you are looking for