Video does not play from DVD

On my iMAC with Mountain Lion, I exported a Video from iPhoto to the desktop, put it into a burn folder, and burned it to a DVD. When I open the Video on the the DVD, it loads as DSCN0097.AIV. When I click on the play button, I can see the progress line moving but it does not show the Movie. What did I do wrong?

You need a vided DVD authoring applicatin like iDVD. If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Similar Messages

Why video does not play when embedded in a PDF when viewed in Windows 8?

I have a situation where video must be embedded within the PDF document and it was working for us using older versions of IE and on 32 bit machines and using acrobat X. When the same file was tested on Windows 8 it looks good and behaves well except the embedded video does not play. The same video (.mp4) will play on the new OS if it is not embedded in the PDF.
Is this because the PDF is looking for a 32 bit flash player? Am I doing something wrong and/or is there a fix for this situation?

Are you watching the pdf file from Adobe Reader?
Windows 8 by default has a diferent reader for pdf files that does not support rich media elements.

The audio in app videos does not play. It used to so I think it is an ios6 problem.

Tha audio in app videos does not play. It used to and works in Safari so my guess is it is an ios6 issue. Any ideas? Thanks.

From Finder menu select Preferences -> Sidebar tab, and tick External disks

24 fps video does not play in CS5.5 source monitor without choppy motion

Problem: 24 fps video does not play in CS5.5 source monitor without choppy motion. 30 frame will play fine. I took the same 24fps shot, using the exact same setup parameters, and played it in my CS5.0. No problem. I did them side by side and checked to make sure everything was EXACLTY the same. The 24fps shot played smoothly in the CS5.0 source monitor. Can anyone tell me what the solution might be to get the CS5.5 to play smoothly? When I rendered it on the timeline in CS5.5 it played smoothly on the timeline. Perplexed.

Thanks Tood,
Here's the other info. I am running CS5.5 on a windows 7 ultimate 64bit (service pack 1) OS. All of the recent updates have been installed on both the OS and the CS5.5. The source footage is H.264.mov from a nikon d7000 at 1080p 24fps. My video card is an Nvida GeForce GTX285. My processor is an Intel Core i7 3.33GHz with 12GB ram. I am running no third party codecs or effects. I am using the Mercury Playback engine GPU accelerator. I am using a DSLR24 frame project setting.
Here is the problem: When I bring a 1920x1080 24fps.mov file into my DSLR24 frame project, or any project setting, in my CS5.5 and open it in the source monitor it plays as if it is trying to catch up; stuttering and skipping; it plays the same on the sequence timeline until I render it. I get no error messages. When I bring the exact same file into my CS5.0, with the exact same project settings, it plays perfectly in the source monitor and on the timeline without rendering. When I bring in a 1280x720 24fps.mov or any other size file into my CS5.5 in any project configuration, it plays perfectly smoothly. Everything plays smoothly without renedering in the source monitors of my CS5.0 and CS5.5 except for a 1920x1080 24fps.mov file in CS5.5. The exact one that I need to play there.
I would have no problem cutting in my CS5.0 if it intergrated with audition; which is why I bought the CS5.5.
Thanks,

Ogv video does not play in Firefox 3.6 on a server

I have successfully create an ogv video in Firefogg. The video plays on my local computer in Firefox. However, when I put the video on my university server, the video does not play any more. Here is a link to the video: http://www.iupui.edu/~streamit/huang/html5video/html5video.html
I don't know how to solve the problem. Help. Many thanks.

No problems here on Linux, that video plays for me.
Try:
* "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"

I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
This question was solved.
View Solution.

Hi,
Try a clean installation of the flash plugin/activeX as follows.
First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
Flash Player Uninstaller.
When the download has completed, close all browser windows, open your Download folder and run the uninstaller. After this has completed, restart the notebook.
When windows has reloaded, download and install the latest version of Adobe Flash. Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
When the installation has completed, restart the notebook.
If the above doesn't correct the issue, then try the following.
First of all, download and run the Shockwave uninstaller on the link below.
http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
After this has completed, restart the notebook.
When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
http://get.adobe.com/shockwave/
Again, after this installation, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Reset Password - System does not boot from DVD

My System: Macbook Pro - 2Ghz Intel Core Duo - OS X - 10.6.8
Hi everyone,
i forgot my password. So i want to boot from install DVD to reset the password. Unfortunately my macbook pro does not boot from DVD (10.6.3).
I press c all the time...but sometimes the macbook pro throws the DVD out...and sometimes nothing happens.
The DVD drive is working fine...
Any other idea?
Thanks in advance.
Fabian

So when you boot holding option it shows a padlock with a password field? Is that correct?
In that case we're talking about the firmware password, which you can't reset via the install disk. There is only one way to do this, I'm not certain if one is allowed to divulge that information publicly - might want to try googling "reset firmware password"

Video does not play on external plasma monitor

Forum
Here is my situation.
I received footage captured with a Panasonic HVX-200, the specs are:
29.97fps, Compressor: DVCPRO HD 720p 60, frame size: 960x720
I use an Intensity Pro video card for monitoring on a 42" Samsung LCD. When the Intensity Pro card is set to HDTV 720p 60 (1280x720) the video does not play on the LCD, all I get is a still frame. When the Intensity Pro card is set to Intensity NTSC 720x486, it plays on the LCD but it's not at its best quality. The footage always plays fine in the FCP Canvas and Viewer windows.
Any ideas on what may be going on?

YOu need to be using DVCPRO HD 720p60 8-bit 59.94...and whatever DECKLINK header that is there for the card. I use the Kona 3, so mine is AJA KONA DVCPRO HD 720p60 8-bit 59.94. 59.94 because no matter what frame rate you shoot, the video stream is a 59.94 stream to the monitor.
I hope that does it. No experience with the Intensity.
Shane

Video does not play in Viewer or Canvas

Hi, I am new to Final Cut Pro. I just imported a couple of .mov files into FCP and have added them to a sequence. When I try to play the files on the Canvas, the video does not play (just shows the first frame). Same goes for Viewer window for an individual file. Help!

You can't really use H264 directly in Final Cut Pro without a lot of hassle.
Your audio has the wrong sampling rate. Digital audio for video is always 48000 kHz.
Use QuickTime Player or Compressor to export a copy of your files using the ProRes codec with the correct audio settings. Bring those into FCP.

Video does not play in preview window.

I have recently upgraded to CS4 from CS3.
In any part of CS4 that uses video; Encore, Premeire and After Effects, video will not play in the preview window from a timeline when the play button is pressed. The playhead doesn't move, but the Play button toggles from Pause to Play when pressed. However, when I scrub the video, I can see it in the window. Video played fine in CS3.
My graphics card is a PNY nVidia Quadro FX 570 with the 178.26 driver. My computer is a Dell Precision 670.
I recently completed a project where I had to trim about 48 QuickTime video files created in Premiere 2.0, compressed with Sorensen 3.
The files were then added to Encore, and a DVD was created. The DVD worked fine. At no time could I preview video, unless I opened the edited video in QuickTime.
This has also happened with still and AVIs.
At no time do any of the CS4 programs freeze or crash the system.
Has anyone had this happen to them. Is it a graphics card issue.... I can't seem to find any info on a similar problem.
Thanks.
sSix

Try turning off (or lowering) Hardware Acceleration for your graphics card.
At the Windows Desktop, Right Click and select "Properties". Under the "Settings" Tab, select "Advanced". Select the "Troubleshoot" Tab and reduce the Hardware Acceleration. You will need to restart you computer to see if it worked. First, try it with no Acceleration. If it works, try increasing the Hardwar Accelearation one notch at a time - rebooting your computer each time. \
I obtained this procedure from the Adobe Technical Staff.
rmv1414

MOV video does not play

Hello guys,
I have posted a H.264 video clip on my website. It's size is 31 MB. It had played great when I was testing it from my desktop, but once I post it, it does not play. "Q" logo shows up, then the very first frame of the video shows up, but that's it. It does not start to play. Here is the link:
http://www.icebergfilms.com/Video_files/demo1.mov
Any idea what I do wrong?
Thank you so much

Hi Kirk,
reason I am doing all these conversions is to achieve the smallest file possible for internet streaming in shortest period of time. I am exporting my video from Final Cut Pro timeline as QT movie. Then it goes to Compressor to be converted to ProRes to make it progressive and to change frame size. Resulting file goes to Compressor again to be converted to H.264. ProRes is an intermediate codec saving a lot of compression time.
I am trying to check settings during last conversion (from ProRes to H.264): Make it Fast Start and change the audio to AAC. But even though resulting file shows that video is AAC, the file is not any smaller at all. And video does not upload any faster with Fast Start on. So obviously, I am doing something wrong.

Video does not play: "Either windows doesn't support the item's file format......"

Error message
"Either windows doesn't support the item's file format or the content doesn't match the extension"
I have both a Yoga and a Thinkpad 2. The Yoga is running Win 8 and the Thinkpad 2 has 8.1 Preview.
I have copied multiple video files which are in either .avi or .mp4 containers.
Some will play and some will not. I have installed all sorts of codec packages and players and the problem is the same. I though it might be a container problem so I tried to convert the file and the converter I used did not work.
Searched the Internet and nothing really useful was found.
Then I discovered a common thread. In the files that played, the codec information displayed when checking in properties and the ones that did not play, did not have the information.
I have a video file on a USB flash drive and checked the properties and the information was there and I could play it from the flash drive. I copied it to my desktop and the file would not play. In checking, the codec information was not present.
There seems to be an error in copying files where the requisite codec information is not being transferred.
I have tried this multiple times and multiple permutations of transferring. Sometimes it will play from the desktop and will not play after transfer to the microSD card.
Each time when it plays, the information is there and each time it does not play, the information is not there.
Sal

The problem is the period at the end. This system assumes it
to be part of the url. I should have put a space and the end of the
url before using a period to close the sentence. try this one:
http://www.aaew.org/intro.swf
http://www.scofieldministries.org/webtest/mv1.swf
http://www.scofieldministries.org/webtest
Please note that just the home page and supporting files have
been loaded to the test server.
Thanks,

All kind of video does not play smooth or else it lags badly on my late macbook pro i7 Quad core 2.4 Ghz, 4GB Ram help me

i am having this problm badly , as i am freelace Video Editor for that i have to show the video work to my clients and when i play MP4,AVi,Mk4,Mpeg, or all kind of video formates it lags while playing
what to do ?
although it's the high conf. machine in macbook pro segment
however it does not play VIDEO

Hey Cris from London,
I would try out the recommended steps in the following link:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Let us know if any of the steps within resolved the issue.
Welcome to Apple Support Communities!
Take care,
Delgadoh

Emailed video plays on iPhone, but web download of same video does not play

I have an MPEG-4 video (mp4v format is all I can tell from VLC or QT Pro). If I email this video to myself on the iPhone 3G, it downloads from the mail server and plays just fine. However, this same video will not play via HTTP on the iPhone 3G. I have tried serving it from a PHP download script and just accessing it directly from a web directory.
Any ideas why the same file would behave differently when playing via these two different invocations? Does the iPhone require the file to have some kind of embedded streaming information to be played via HTTP?

take a look through this forum, and you'll see a couple of users that had to change the .htaccess on their webserver in order to stream video files.

SWF created in CS4 Flash does not play from web server

I published a Flash movie in CS4, which includes the following ActionScript 3.0 code to allow people to click the movie to open a new web page; but it will not play from the web server...however, it plays just fine from my local hard drive in Firefox and IE 7.
It is an html file with an embedded .swf and I made sure to copy over the swfObject.js, AC_ActvieX.js, AC_RunActiveContent.js, expressInstall.swf, and swfobject_modified.js files to the correct directories. The address is: http://www.giseldemarco.com/introduction.html and as you will see, there are no errors...just a blank page. I even tried changing the script from:
<script type="text/javascript">

</script>
to this script: <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js"></script>, but using this script generates a lot of CSS and other errors.
Nothing works. The ActionScript code I used is:
//Link to website
Site_btn.addEventListener(MouseEvent.CLICK,visitSite);
function visitSite(e:MouseEvent):void{
    var req:URLRequest = new URLRequest("http://giseldemarco.com/Home/Index.html");
    navigateToURL(req,"_parent");
I am at a loss here...any help would be greatly appreciated!
Thank you.

Nothing new... Flash developers fall for this all the time...
SecurityError: Error #2148: SWF file http://www.giseldemarco.com/Introduction.swf cannot access local resource C:\Gi\All The Way\New Splash Screen\Spalsh\Spalsh.flv. Only local-with-filesystem and trusted local SWF files may access local resources.
    at flash.net::NetStream/play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_load()
    at fl.video::VideoPlayer/load()
    at fl.video::FLVPlayback/doContentPathConnect()
Cheers
--Vikas

Video does not play from DVD

Similar Messages

Maybe you are looking for