Video does not play using windows XP running on MAC BOOK PRO?

noticed this problem with someone i know using a 15 MBP
somehow it does not play videos using windows xp?

Similar Messages

Video does not play: "Either windows doesn't support the item's file format......"

Error message
"Either windows doesn't support the item's file format or the content doesn't match the extension"
I have both a Yoga and a Thinkpad 2. The Yoga is running Win 8 and the Thinkpad 2 has 8.1 Preview.
I have copied multiple video files which are in either .avi or .mp4 containers.
Some will play and some will not. I have installed all sorts of codec packages and players and the problem is the same. I though it might be a container problem so I tried to convert the file and the converter I used did not work.
Searched the Internet and nothing really useful was found.
Then I discovered a common thread. In the files that played, the codec information displayed when checking in properties and the ones that did not play, did not have the information.
I have a video file on a USB flash drive and checked the properties and the information was there and I could play it from the flash drive. I copied it to my desktop and the file would not play. In checking, the codec information was not present.
There seems to be an error in copying files where the requisite codec information is not being transferred.
I have tried this multiple times and multiple permutations of transferring. Sometimes it will play from the desktop and will not play after transfer to the microSD card.
Each time when it plays, the information is there and each time it does not play, the information is not there.
Sal

The problem is the period at the end. This system assumes it
to be part of the url. I should have put a space and the end of the
url before using a period to close the sentence. try this one:
http://www.aaew.org/intro.swf
http://www.scofieldministries.org/webtest/mv1.swf
http://www.scofieldministries.org/webtest
Please note that just the home page and supporting files have
been loaded to the test server.
Thanks,

Music Videos - have sound but video does not play in windows 7

I have windows 7 and the latest version of Itunes.
Most everything seems to be working ok, but when i try to play a music video i get the sound ok, but the video never starts, it just seems to stay on the first screen shot and never changes, even when the next video starts.

Not sure why, assume you got the 32-bit version if that is what you run, and this is quicktime? maybe you need a different codec or application for the movie format; or didn't associate the file type...
but if it deals with iTunes you will find more help in iTunes Windows:
http://discussions.apple.com/category.jspa?categoryID=150

Using windows xp on a mac book pro!

umm kinda a weird question.
if i need to use a windows based device with the mac book, and i just plug it into the usb port and then access it within parallels?
the device in question is a USB modem provided from a cell phone company that allows me to use the internet. and its windows only.
i currently do not have a mac book, but sometime within the next few weeks im hoping to get one.
and i just want to find as much information as possible
thanks

Hi irishking;
Sorry but I am not able to answer your question because I do not do anything with M$.
I will say that everything I have heard about USB modem has been bad. They have to have drivers on the computer in order to work so in order to upgrade you must be sure to get new drivers first. Then when they are working their performance is less then stellar.
My suggestion would be to trash the USB modem and replace it with an Ethernet Modem. They don't require drivers and they perform much better.
I know that when I switched to DSL the phone company want to give me a USB modem that was Windows only. I said no that if that was all they had I was canceling the contract because I had Mac and I wanted something that worked with Mac. All of a sudden they found an Ethernet modem for me.
Allan

Why video does not play when embedded in a PDF when viewed in Windows 8?

I have a situation where video must be embedded within the PDF document and it was working for us using older versions of IE and on 32 bit machines and using acrobat X. When the same file was tested on Windows 8 it looks good and behaves well except the embedded video does not play. The same video (.mp4) will play on the new OS if it is not embedded in the PDF.
Is this because the PDF is looking for a 32 bit flash player? Am I doing something wrong and/or is there a fix for this situation?

Are you watching the pdf file from Adobe Reader?
Windows 8 by default has a diferent reader for pdf files that does not support rich media elements.

The audio in app videos does not play. It used to so I think it is an ios6 problem.

Tha audio in app videos does not play. It used to and works in Safari so my guess is it is an ios6 issue. Any ideas? Thanks.

From Finder menu select Preferences -> Sidebar tab, and tick External disks

24 fps video does not play in CS5.5 source monitor without choppy motion

Problem: 24 fps video does not play in CS5.5 source monitor without choppy motion. 30 frame will play fine. I took the same 24fps shot, using the exact same setup parameters, and played it in my CS5.0. No problem. I did them side by side and checked to make sure everything was EXACLTY the same. The 24fps shot played smoothly in the CS5.0 source monitor. Can anyone tell me what the solution might be to get the CS5.5 to play smoothly? When I rendered it on the timeline in CS5.5 it played smoothly on the timeline. Perplexed.

Thanks Tood,
Here's the other info. I am running CS5.5 on a windows 7 ultimate 64bit (service pack 1) OS. All of the recent updates have been installed on both the OS and the CS5.5. The source footage is H.264.mov from a nikon d7000 at 1080p 24fps. My video card is an Nvida GeForce GTX285. My processor is an Intel Core i7 3.33GHz with 12GB ram. I am running no third party codecs or effects. I am using the Mercury Playback engine GPU accelerator. I am using a DSLR24 frame project setting.
Here is the problem: When I bring a 1920x1080 24fps.mov file into my DSLR24 frame project, or any project setting, in my CS5.5 and open it in the source monitor it plays as if it is trying to catch up; stuttering and skipping; it plays the same on the sequence timeline until I render it. I get no error messages. When I bring the exact same file into my CS5.0, with the exact same project settings, it plays perfectly in the source monitor and on the timeline without rendering. When I bring in a 1280x720 24fps.mov or any other size file into my CS5.5 in any project configuration, it plays perfectly smoothly. Everything plays smoothly without renedering in the source monitors of my CS5.0 and CS5.5 except for a 1920x1080 24fps.mov file in CS5.5. The exact one that I need to play there.
I would have no problem cutting in my CS5.0 if it intergrated with audition; which is why I bought the CS5.5.
Thanks,

Video does not play on external plasma monitor

Forum
Here is my situation.
I received footage captured with a Panasonic HVX-200, the specs are:
29.97fps, Compressor: DVCPRO HD 720p 60, frame size: 960x720
I use an Intensity Pro video card for monitoring on a 42" Samsung LCD. When the Intensity Pro card is set to HDTV 720p 60 (1280x720) the video does not play on the LCD, all I get is a still frame. When the Intensity Pro card is set to Intensity NTSC 720x486, it plays on the LCD but it's not at its best quality. The footage always plays fine in the FCP Canvas and Viewer windows.
Any ideas on what may be going on?

YOu need to be using DVCPRO HD 720p60 8-bit 59.94...and whatever DECKLINK header that is there for the card. I use the Kona 3, so mine is AJA KONA DVCPRO HD 720p60 8-bit 59.94. 59.94 because no matter what frame rate you shoot, the video stream is a 59.94 stream to the monitor.
I hope that does it. No experience with the Intensity.
Shane

Video does not play in Viewer or Canvas

Hi, I am new to Final Cut Pro. I just imported a couple of .mov files into FCP and have added them to a sequence. When I try to play the files on the Canvas, the video does not play (just shows the first frame). Same goes for Viewer window for an individual file. Help!

You can't really use H264 directly in Final Cut Pro without a lot of hassle.
Your audio has the wrong sampling rate. Digital audio for video is always 48000 kHz.
Use QuickTime Player or Compressor to export a copy of your files using the ProRes codec with the correct audio settings. Bring those into FCP.

Lightroom 5.4 does not open, using windows 7

lightroom 5.4 does not open, using windows 7. I downloaded the trail and it does not open. I want to buy it, but i am afraid it will not work. I do not get an error code or anything it just will not open.

Thanks but none of the options in that KB fix the problem.
The "Exit Code" was 3 rather than "0" and so it doesn't look like the patch will install. In terms of the third option, I mentioned in my original message that I cannot "Deactivate" my other CS6 programs because that option is grayed out in those programs. But those programs work just fine (other than Acrobat Pro X) and so I think there may be a bigger problem with all of my Adobe products.

Ogv video does not play in Firefox 3.6 on a server

I have successfully create an ogv video in Firefogg. The video plays on my local computer in Firefox. However, when I put the video on my university server, the video does not play any more. Here is a link to the video: http://www.iupui.edu/~streamit/huang/html5video/html5video.html
I don't know how to solve the problem. Help. Many thanks.

No problems here on Linux, that video plays for me.
Try:
* "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit.

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit. I can copy and print only. Thanks.
This question was solved.
View Solution.

Hi,
Is the printer connected to your PC by USB or network?
By using USB connection, you may scan using the Windows Fax and Scan software integrated into your OS.
Scanning through a network connection unfortunately supported on Windows7 32 bit only, as you may find listed within the About network scanning section below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136#A2
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

Please also see Boot Camp: Set the default operating system.

How can i run a windows based program on mac book pro

Can I run a windows based program on mac book pro mountain lion 10.8.4

You can use bootcamp to install windows natively on the hard drive. You then choose which OS you wish to use at startup - OS X or Windows.
You can also install Windows in a virtual machine - Parallels or VMWare Fusion - and run it simultaneously with OS X (a virtual machine is just a PC emulated in software, and you install and run windows in the emulated machine hardware).

Does anybody know how I can get my Mac Book Pro back, which was stolen during a presentation I was attending. I have the store receipt, however I had not installed i Cloud in my mac Book?

Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
Thanks for helping me!

Sorry to say but you are out of luck.
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0
           9. Prey 0.6.2

Video does not play using windows XP running on MAC BOOK PRO?

Similar Messages

Maybe you are looking for