Video does not restart when closed and re-opened

I have a .f4v file (Adobe Premiere) embedded into a swf. The
video is launched into an iframe when the user clicks on the link
to "See Video". When I close the iframe in Firefox and then click
on the link again to launch the video, it starts from the
beginning. In IE7, IE6 and Safari the video continues from where it
left off. I would like for it to start from the beginning like in
Firefox. Any suggestions?
Thanks!

Do you have a link to the video. Why are you using the iframe? I'm curious to see how this works. I have a html page with a swf with buttons that play movies on a small area on the screen it's easily controllable though I only programmed the pause button. I have the selection buttons run the small videos on roll over and a higher res larger version with swf skin with full controls - seek when you click the selection.
http://jimslounge.com/publicDomain/

Similar Messages

My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device?

How to create a looping music player that does not restart when you go to other pages

Hello
I am new to web design. I apologize if I do not use the write
terminology. I am designing a website. I want to have a song that
loops continuously throughout the site and does not restart when
you click on the different pages. I have included a link to a site
that I found that does what I want to do. (Hopefully this link will
give you a better idea of what I am trying to describe)
http://www.marcuscoleministries.com/index2.html
Thanks for your time and consideration

You will have to use frames which in itself is a bad idea.
IMO music that
plays automatically is a terrible idea. It is likely to drive
away many
visitors and is unlikely to retain even a single visitor.
Avoid frames. Drop the music. You'll be happy you did.
Walt
"dbone1" <[email protected]> wrote in
message
news:fn36v6$de7$[email protected]..
> Hello
>
> I am new to web design. I apologize if I do not use the
write terminology.
> I
> am designing a website. I want to have a song that loops
continuously
> throughout the site and does not restart when you click
on the different
> pages.
> I have included a link to a site that I found that does
what I want to do.
> (Hopefully this link will give you a better idea of what
I am trying to
> describe)
http://www.marcuscoleministries.com/index2.html
>
> Thanks for your time and consideration
>
>

ITunes screen does not appear when I try to open

ITunes screen does not appear when I try to open. I can play music by using "controls" but screen does not open.

What did your email provider say about it when you contacted them?

Video does not display when sending from Final Cut Pro to Motion

Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
Additionally, when rendering the Motion file back in FCP, it turns in to black video.
I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
Help, please?

Do you have Motion mistakenly set to render out with an Alpha channel?
Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

Why video does not play when embedded in a PDF when viewed in Windows 8?

I have a situation where video must be embedded within the PDF document and it was working for us using older versions of IE and on 32 bit machines and using acrobat X. When the same file was tested on Windows 8 it looks good and behaves well except the embedded video does not play. The same video (.mp4) will play on the new OS if it is not embedded in the PDF.
Is this because the PDF is looking for a 32 bit flash player? Am I doing something wrong and/or is there a fix for this situation?

Are you watching the pdf file from Adobe Reader?
Windows 8 by default has a diferent reader for pdf files that does not support rich media elements.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

Yosemite - Safari still does not warn when closing multiple tabs, what will it take to get Apple to add this simple option?

I cannot understand why Apple does not add the option to warn you when closing multiple tabs. There are posts all over the Internet requesting the feature or looking for a way to do it. Why do they totally ignore this valuable, simple feature?

Thanks for the support. I guess you take one battle at at time because you hate to lose multiple battles and I picked this one. However, and this could go on quite a while, why do I have to buy another application to sort my bookmarks and have the sort sync the Cloud?. Bookmark sort - that is a programming 101 feature. Now I found that iPhoto can read AVCHD video files and Quicktime cannot. Oh my. I wish Apple would read the posts and actually take them into consideration. It would make their users feel more included. I do like Yosemite and love email markup. Good job but the customers have a few good ideas too.
At least you can Air Drop to Mac now!

Workflow process does not restart when re-ordering a PO

We are running SRM 7.0 with Process Controlled Workflow and have configured N-Step approval process for PO.
When the PO is ordered for the first time, the approver determination and the approval process work as expected. However, after the PO has been ordered, and the user makes changes to the ordered PO and re-orders it, the PO's approver list does not get refreshed, and the PO header shows the following staled information in "Approval" tab with "current status" = "Finished" -
Process Step Status Processor
SRM Purchase Order Approval Approved <approver user name>
And the PO would go into "Awaiting Approval" status but the PO work item does not appear in anybody's UWL.
Any hints regarding the possible cause of this behavior are appreciated.
Thanks.

Hello,
check in the BBP_PD the changed version po generated. there you will see if any WFL started or not. Or take the PO change version GUID and go at SWI6/swi1 to check the WFL log.
At SLG1 should appear also, check if at table /SAPSRM/C_WF_CST you have the trace level set to 1. This will make slg1 take all logs (green and red).
You can also always force a restart via BADI /SAPSRM/IF_EX_WF_PROC_RESTART
Thanks,
Melina

4.0b10 does not ask when closing multiple tabs

if there are multiple tabs open, and i close FF, it does not warn me.
The settings are ok, and i have checked the "warn me when closing multiple tabs"
i have tried the Safe Mode, and that is the same.
however, if i open a second window,when exiting that second window,it asks , but the main window does not...
so weired.
may be a bug of b10.
any helps are appreciated.

The prefs for Save & Quit the warning message have been set by default to false in current Firefox 4 beta versions (Bug 592822 - Remove quit warning dialog).
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle with a double left-click.
* browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart

WF does not restart when requester accept changes

Hi,
We have a problem with the non badi Workflow in SRM Server 5.0 (even with a 1 step Workflow WS10000129). When a approver (bbp_wfl_security = low)changes the Quantity or the Price the changed shopping cart returns to the Inbox of the requester. When the requester goes into his inbox and looks at the approval preview for the changed shopping cart in the graphic mode the result is Approved. When the requester clicks on Accept changes the shopping cart disappears out of his inbox. The shopping cart does not go to the approver again. The shopping cart becomes not a purchase order. We would expect that the workflow would restart after the requester clicks on Accept Changes however now it is a black box.
Greetings,
Wilko Karrenbeld

Hi
What type of Workflow is used in the ystem - Item level Workflow or SC Workflow. ?
Couple of reasons can be behind this.
1) Either the BADI code in custom implementation is incorrect.
2) start conditions for Workflows and sub-workflows are not correctly determined.
3) Missing OSS note / Bug in ths system.
Please refer to these OSS notes.
<b>990317 Work item transferred after change has been accepted
899943 'Accept changes' after rejection
846334 BAdI workflows: Problems with 'Accept changes'
944984 Non-BAdI workflows: No deletion when changes are accepted
942089 'Accept changes' creates restart
948733 Endless loop during approver determination of WS14000109
725250 No workflow determined when creating a shopping cart
986724 RBBP_OFFLINE_EVAL: Errors in "Accept Changes"
995773 Partial rejections result in endless loops in approval
976267 Partly rejected shopping carts cannot be changed
863757 Item approval: Accepting changes goes back to same manager
862661 Item approval: Accepting changes incorrect II
796992 BADI Workflow with back and forth logic: No restart (PO)
502918 EBP: Work item "for resubmission" remains in inbox
855867 ordering on behalf remains in awaiting approval
815415 Item approval: Accepting changes
866089 Button "Accept changes" at complete rejection
955863 Button "Accept changes" for approver</b>
Incase nothing helps, please raise an OSS message with SAP as well.
Regards
- Atul

On my mini Ipad the video does not work when I want to film something what do i need to do or how can i resolve this issue?

I would like to know How to fix this problem with my mini Ipad, camera works well when I take photos but if I try to use for video the screen does not respond. it only response to photo, so I can I fix this ?

All iPads (except the first gen which doesn't have a camera) are capable of taking videos. What version of iOS do you have on your iPad ? With iOS 7 you slide the Video / Photo / Square options up/down so that the one that you want lines up with the yellow dot to their left - is that how you are trying to select Video ?

Accordion load event does not fire when accordion and load event created dynamically using actionsript

I cannot get the accordion load event to fire when I have
created the accordion and load event using actionscript . Here is
some sample code:
createClassObject(mx.containers.Accordion, "acc",
getNextHighestDepth());
acc.createSegment(mx.containers.ScrollPane, "sc1", "Number
One");
acc.createSegment(mx.containers.ScrollPane, "sc2", "Number
Two");
var accLis=new Object();
accLis.load=function(evtObj) {
trace("load");
accLis.change=function(evtObj) {
trace("change");
acc.addEventListener("load", accLis);
acc.addEventListener("change", accLis);
I made sure to add the ScrollPane and Accordion components
to my library. So the load event does not fire, but the change
event does fire. And through further testing the other events do
not fire, including the draw event. Can anyone help? The only time
I can get the load event to fire on an accordion is if I put an
accordion on stage, select it and add the actionscript to the
objects actions like shown below:
on(load) {
trace("load");
on(draw) {
trace("draw");
Can somebody help? Unfortunately I must create all my
components dynamically. Thank you in advance.

I'm having this issue also...but only apparently with Internet Explorer and only on some machines...ideas?

HT1776 MacBook does not sleep when closed

I have a Late 2013 Retina Macbook Pro running Mavericks. Sometimes when I close the lid, it does not sleep or turn off the display, even after the set time in Energy Saver preferences. My main concern is that I have my security settings set to lock my computer 5 seconds after sleep/turning off the display, and this does not happen, as it does not go to sleep. The only way I notice is that when I open the computer some time later, the screen is already on and it is not locked. There are no periphials connected when this happens.

Sleep - Why your Mac might not sleep or stay in sleep mode
Sleep - Won’t

Firefox does not warm when closing or quitting multiple tabs

Even though I have it set to warn me when closing or quitting, Firefox will quit and close multiple tabs. It defeats the purpose of having that setting turned on in the first place. Please help.

It looks like a setting I thought I had turned on was not:
browser.showQuitWarning: true

Video does not restart when closed and re-opened

Similar Messages

Maybe you are looking for