Video doesn't play while audio does during playback

I use FCE 1.0.1 and since I upgraded to Leopard I have had a little problem. When I put the video setting in Fire-Wire, it plays fine with audio playing through my camcorder. But when I put the video setting in Real Time to play the audio through my speakers, the video doesn't play while the audio is playing fine. After 5 or 6 seconds, the audio stops playing too.
My G5 is a single 1.8 GHz processor and I am running 10.5.1
Anything?

I appreciate your insight with this. If I could ask one more set of questions; Would you recommend the "upgrade" linked below or the Full version? And what will be the practical differences for me the user?
I have started a new project in version 1.0.1 (capturing and a few edits, etc) since upgrading to Leopard. Will all of my work be there with either upgrade or full version after install?
Thanks so much.
http://www.amazon.com/Final-Cut-Express-Upgrade-3-5/dp/B000Z3GSXK/ref=pdbbs_sr1?ie=UTF8&s=software&qid=1198585705&sr=8-1

Similar Messages

Why does my video not play while audio does?

Using iMovie 9 found that after bringing a clip from clips pane into my project that I could no longer insert or edit the project. The green insert cursor remained but all was frozen. After quitting, video clips in project pane will not play while audio (both audio from the actual clips and music) does play. When mouse hovers/scrubs over the clips in the project pane the video clips do come alive but not when i press space bar or play buttons (play full screen /play project from beginning buttons) in bottom left of window. Strangely video in clips pane do play when I press space bar.
I tried creating a new project and importing clips but no video will play. Same thing applies to all my imovie projects. Another strange thing, the other projects will play when I click on Play Fullscreen button but not my most recent project. Instead, when I click Play full screen button the Last (ie. last in alphabeitical order) of my projects plays instead!
I would really appreciate some help with this. Have spent a lot of hours on the project and seems like I can't even start again.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Video will not play, yet audio does.

Like the header says, all of a sudden I go to work on a project I've never had trouble with and the video will not play; it is frozen wherever the cursor is. Yet the audio does play. I've tried clearing cache, clearing premiere cache, gone all over the internet to try and find an answer, of course India is closed right now, so no help there, not that they really give it anyway. So I'm asking if anyone might have experienced this one and figured it out despite Adobe. I'm on a PC with Windows 8 and terabytes and terabytes of storage; plenty of space left on disc, too. As I said; this has never been even a hint of a problem Just started up today. This even beats most Adobe "beta testing" problems they heap on us unsuspecting sheep. So I'm completely flummoxed. A prize to whoever knows what's up with this! It's a new one on me... Thanks in advance to whichever genius knows the answer! :-)
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

OK, I found the answer by myself and wish to share it with those having the same issue. It turns out that the saved workspace can corrupt allowing audio to play, while video remains frozen. The fix is to change the workspace. Go to WINDOW, after creating a new style workspace and save the new workspace. Problem fixed. Also, if there are already a number of other saved workspaces that involve video you can simply change to that one and it will be fixed. Delete the corrupt workspace. That's it! This was discovered through a simple process of elimination which proves that bugs really can surface anywhere for no intuitive reason. Hope this helps you!

Video will not play but audio does

I transfered some .mov files from my friends mac and tried playing it on my pc. It plays the audio but not the video on Quicktime. I tried using the VLC player and it says some thing about "icod." I tried many converters but they all failed.

Load one of the videos into QuickTime Player, open the Movie Inspector (from the Window menu), and post the information shown in the Format section. That will provide some important information for diagnosing the issue and suggesting what to do.
Regards.

I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
hope someone can help!

May have something to do with whether or not the URL can be reached while building your widget. I've got a video on the web. When I enter the URL into the field for the video object and click to another field, the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you.
Is the video accessible from your Mac while you're laying out your widget?
-Mark

Video doesn't play on internet

Hey Good People,
I have been scratching my head trying to figure out why this Flash video doesn't play. I checked to make sure it is in the correct format. I've tried FLV and H.264 neither of which plays. The custom play button appears and the alpha goes to 0 when clicked but the video doesn't play. It works in the flash environment and on my desktop when I dropped it into an html shell. Can anyone tell me what I need to do to make this work?
VIEW THE VIDEO
http://clienttestsite.x10.mx/beta/swfs/managers.swf
DOWNLOAD THE VIDEO
http://clienttestsite.x10.mx/beta/swfs/managers.fla

You should use Flash debug version. When you do, you will se a security error:
SecurityError: Error #2148: SWF file http://clienttestsite.x10.mx/beta/swfs/managers.swf cannot access local resource C:\Users\Demetrius McClain\Desktop\Value Insight\chevrolet\video.f4v. Only local-with-filesystem and trusted local SWF files may access local resources.
    at flash.net::NetStream/play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_load()
    at fl.video::VideoPlayer/load()
    at fl.video::FLVPlayback/doContentPathConnect()
Obviously, you hardcoded video path to your local machine. Change that.

Youtube videos doesn't play until fully loaded

Youtube videos doesn't play until they are fully loaded. It doesn't work for ANY streamed video, not just Youtube. It happens on both Firefox and IE. I tried to uninstall Flash and re-install it, but it didn't help. The only thing that solves it is restarting the computer, but it just returns after some time.
How can I fix it?

Hi, This is the info on the hardware acceleration and system requirements. http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
The video card affects playback:Although Flash Player can display high-quality video and images by itself, hardware-accelerated scaling uses the video or graphics card on your computer to display images and video more clearly and quickly than Flash Player can on its own.
Not everyone can use it and that's why turning it off helps. Since you have it turned off, then this no longer affects you.
They may be some add on in the browser that is causing this. Kaspersky had been using a URL Advisor that is an "extension"
but whether you have it I don't know. In IE, in the manage add ons, look for "Show"(very light text) and look in all 4 categories for it.
In FF, it may be in the extensions. I'd look in all, addons, plugins & extenstions.
If you find it, disable it. If you don't find it, then all I could suggest is to disable all IE add ons except Shockwave Flash Object and Java and see it there is an improvement. Then do the same with FF.
Hope you find out what is causing it.
Thanks,
eidnolb

Youtube video doesn't play on captivate project online

Hi there, I need help, I have 4 equal projects made on Captivate 8 for mac, the difference between them is the video from youtube they should play. When from my computer I run the links online the videos play OK, but from different computers one of the videos doesn't play, I already checked and changed the links for the youtube widget, but still no result. Any Idea or suggestion? Thx in advance!

You should use Flash debug version. When you do, you will se a security error:
SecurityError: Error #2148: SWF file http://clienttestsite.x10.mx/beta/swfs/managers.swf cannot access local resource C:\Users\Demetrius McClain\Desktop\Value Insight\chevrolet\video.f4v. Only local-with-filesystem and trusted local SWF files may access local resources.
    at flash.net::NetStream/play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_load()
    at fl.video::VideoPlayer/load()
    at fl.video::FLVPlayback/doContentPathConnect()
Obviously, you hardcoded video path to your local machine. Change that.

Video doesn't play in authoring player, does play in debug player

I just updated to CS5 - I'm working on a custom video player. It works fine embedded in a web page both locally and on the network. It works fine in the debug player. However, when I test it in the authoring player I get a NetStream.Play.StreamNotFound error and no video. I have tried setting the Local Playback Security publish settings to both local and network - doesn't find the video either way.
It used to run fine in CS4 in the authoring environment.
Obviously it's hard to debug the problem when it doesn't fail in the debugger. ;-)
Am I missing a setting or ... ?

I just tested the issue with the included Flash video player component which does work fine in the authoring mode.

Video won't play but audio will.

Whenever I try to playback my video, the playhead will move but it will stay in the frame I started from and won't play the video, but the audio will play. I;ve tryed rendering everything, restarting my computer, and cleaning the cache but none of that will work. I tried exporting the video and it played fine but it still would do the same thing when I went back to editing. Does anyone have any idea on how to fix this? Does it have anything to do with me only having 4gb of ram?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Video doesn't play with .MOV files, only hear sound

I have Elements 9 and I just imported my photos and videos from my new camera - Panasonic Lumix DMC FH27 10 Zoom 16 megapix and when I played them in Elements 9 all I could hear is the sound, all conversation, but the video won't play, just a black screen. The file they trasfered with is MOV . I have Quickplayer installed on my computer already, the lastest version, I just updated. Any suggestions? Thank you so much.

Yes, it does. It just doesn't
play i n Elements 9.

Video Doesn't play on website

Check out this site to see if anyone can see why this scrip
doesn't play this video. It may be the player size?
Thanks in advance
VideoWebGuy

this site ????
"WebVideoguy" <[email protected]> wrote in
message
news:gh1fel$59c$[email protected]..
> Check out this site to see if anyone can see why this
scrip doesn't play
> this video. It may be the player size?
>
> Thanks in advance
> VideoWebGuy

Video doesn't play in Android 4.2.2, but it plays in Android 4.1.2 (Captivate 8)

I have a slide with an event video (mp4). I publish to HTML5.
The video plays as expected in Android 4.1.2's built in browser, but it doesn't play in Android 4.2.2's built in browser.
I have tried with and without autoplay. I've also tried starting the video with a button.
Any suggestions would be highly appreciated.
Thanx
Jørgen

Hi there
First, please report it to Adobe using the link below. But I'd have to say I'm inclined to believe the issue is likely on the Android side. I mean, since it seems fine in one browser and works.
http://www.adobe.com/go/wish
Cheers... Rick

Video podcasts only playing in audio on ipod touch

Hey my ipod touch only plays the audio of the downloaded video podcasts, can someone help me please ?

If you play through music > more> podcast you will only hear audio! On the home screen there is a video app right next to the music app. So click on the video app and scrll down and you should be able to watch video podcast from there!

IMORTED AUDIO/VIDEO FILE ONLY PLAYS THE AUDIO WITH A BLACK SCREEN

I'm trying to put a DVD together of my friends' concert, but every time I export from AVID to a QT file, import it, transcode it, and put it in a timeline, it only plays audio and a black screen.
I went back into AVID and made sure that I exported both audio and video...I did. Then I checked the QT file, and it plays the audio and video.
I exported the files as uncompressed. Should I use a compressor?
PLEASE HELP!!!
Thanks.

Encore CS3
Video
Compression: None
Depth: Millions of Colors +
Quality: Best
Audio
Format: Uncompressed
Sample Rate: 48kHz
Sample Size: 16
Channels: 2
Size:
720x486
Aspect Ratio:
16:9 square pixel (864x486)
Also,
I recently made another DVD with the same settings that turned out fine, so I'm not sure what the problem is with this one.
Thanks.

Video doesn't play while audio does during playback

Similar Messages

Maybe you are looking for