Video Doesn't Show While Capturing in PrCS4

Hi,
I was capturing my video into PrCS4 just fine last night and then when I switched tapes, my video didn't show anymore in the capture window. It plays on my camcorder and in the capture window I can press play/stop/etc. and the counter on the left is counting the time just fine. I also took the tape to work this morning where I have a SonyDVCam deck, but that gives me another issue where Pr recognizes it, but when I hit play on the deck it sounds like it's playing, but nothing appears on the capture screen and the counter doesn't even move. My camcorder is a Canon HV30, using Sony MiniDV tape, shot in DV widescreen. I tried turning off the camera and turning it back on, opening and closing the capture window (cause that seemed to work earlier in the evening), and restarting Premiere and the computer as well. Nothing seems to work. Any suggestions?
Thank you!
Jen

Set your camera to DV, not HDV. Preview will show. Or try Scenalyzer, much better for DV. If you have HDV there is no preview nor scenedetection during capture, as explained in the help file and manual. Try HDVSplit for HDV material, again much better than Adobe. Preview and scendetection are available with this application for free.

Similar Messages

Video doesn't play while audio does during playback

I use FCE 1.0.1 and since I upgraded to Leopard I have had a little problem. When I put the video setting in Fire-Wire, it plays fine with audio playing through my camcorder. But when I put the video setting in Real Time to play the audio through my speakers, the video doesn't play while the audio is playing fine. After 5 or 6 seconds, the audio stops playing too.
My G5 is a single 1.8 GHz processor and I am running 10.5.1
Anything?

I appreciate your insight with this. If I could ask one more set of questions; Would you recommend the "upgrade" linked below or the Full version? And what will be the practical differences for me the user?
I have started a new project in version 1.0.1 (capturing and a few edits, etc) since upgrading to Leopard. Will all of my work be there with either upgrade or full version after install?
Thanks so much.
http://www.amazon.com/Final-Cut-Express-Upgrade-3-5/dp/B000Z3GSXK/ref=pdbbs_sr1?ie=UTF8&s=software&qid=1198585705&sr=8-1

Imported video doesn´t show up

Hello people, I am a Flash beginner user
I am trying to import a .flv video to my flash website
I do it by choosing the "Progressive download from a webserver" option
In the .swf file generated, the video runs normally , but when I run my website trough the index.html file and I go
to the page where It is supposed to be, the video doesn´t show up, as if it never existed
I don´t know what may be hapenning.
Thank you very much.
Best Regards
rnucci

Hello.
I haven´t uploaded the website to the server yet,
the video doens´t show up even when I run the index.htm file form my desktop !
I ask myself if it might be a problem of layer order or something.
If you wanna take a look at the website is this one:
www.fgmf.com.br

Video doesn't show?

I don't know if this has already been answered but the video podcasts that I have on my iPod I can find through the Top Rated Playlist but not directly through the Videos one. Does anybody know how I can put it so it shows up when you go to Videos?

It doesn't show up under Videos-->Video Podcasts?
Does the podcast show up under Music-->Podcasts on the iPod?
Also, open iTunes and connect your iPod. Click on the iPod when it appears in iTunes under "Source." Does the video podcast have a little TV/video icon next to it in iTunes?
btabz

Flash Video doesn't show progress or load bar

I need to show a progress download bar and loading stripes
when stalling/loading (eg like youtube and millions of other online
video) otherwise the user thinks the video isn't loading or
playing.
I've tried two things:
1. Creating the flv using Flash Video Encoder results in a
40MB flv. I then insert the flv into my page in dreamweaver. The dw
tools pop up and I choose progressive download and my skin etc. The
resulting page plays the video fine but there's no progress bar or
loading stripes when the video is loading/stalling.
2. Inserting the video into a flash file and creating a swf
which is then inserted into the html page - as per the instructions
by media247 on this page:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1332318
- no luck doing that either, it shows the player controls with a
blank video screen until the video is buffered, then plays the
video and it stalls/loads with no stripes or load progress
indicator bar. (Same as above, really, but with a different skin
selection)
I've tried heaps of different skins and settings in the
encoder and flash importer thing but it just doesn't work - I've
had this same problem before and searched the net without joy. Can
someone tell me what might be wrong? Is there a simple setting in
the importer somewhere??
Thanks for your help

I need to show a progress download bar and loading stripes
when stalling/loading (eg like youtube and millions of other online
video) otherwise the user thinks the video isn't loading or
playing.
I've tried two things:
1. Creating the flv using Flash Video Encoder results in a
40MB flv. I then insert the flv into my page in dreamweaver. The dw
tools pop up and I choose progressive download and my skin etc. The
resulting page plays the video fine but there's no progress bar or
loading stripes when the video is loading/stalling.
2. Inserting the video into a flash file and creating a swf
which is then inserted into the html page - as per the instructions
by media247 on this page:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1332318
- no luck doing that either, it shows the player controls with a
blank video screen until the video is buffered, then plays the
video and it stalls/loads with no stripes or load progress
indicator bar. (Same as above, really, but with a different skin
selection)
I've tried heaps of different skins and settings in the
encoder and flash importer thing but it just doesn't work - I've
had this same problem before and searched the net without joy. Can
someone tell me what might be wrong? Is there a simple setting in
the importer somewhere??
Thanks for your help

Downloading youtube videos - doesn't show in 'downloads folder'

Hi there I am new to MACs etc and used to download videos from youtube using quicktime on Windows.
I have read the blogs re finding the video, going to Windows>activity; double-clicking once the buffering has happened, and then supposedly the clip should download to 'Downloads'. Mine just doesn't download - is there something I need to set in Preferences please?

YouTube also uses HTML5, among others, but be that as it may:
How to download Flash videos and play them in Quicktime using Perian is explained here:
http://perian.org/#watch
It's the video at the bottom of the page.
Also, there is the Free iTube Grabber which can capture almost any audio and/or video stream (it says here:)
http://www.versiontracker.com/dyn/moreinfo/macosx/10972178
Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
and the RealPlayer Downloader that comes with RealPlayer 11 for Mac from:
http://www.versiontracker.com/dyn/moreinfo/macosx/15540
which also downloads videos from YouTube.

Synced videos doesn't show up on iPad

Hello,
I have two videos (one mp4 and one m4v) that I've successfully transfered to the iPad through iTunes.
But when I start the Video app, the screen says "No Videos".
How do I make the synced videos show up on my iPad?
If I go to Settings -> General -> About on the iPad, it says 0 movies.
But in iTunes, the movies are in fact on the iPad, and I can watch them fine, streamed from my iPad, within iTunes on my PC.

Just been struggling with this issue myself on my little girl's iPad. Turns out that I had synced a rated movie but had restrictions on the iPad that prevented viewing of that movie. I lifted the restrictions (in General settings) and the movie appeared.

Video clip doesn't show

When I connect my Panasonic Lumix DMC-FZ40 camera to iphoto 2009, the video doesn't show to be downloaded. I'm wondering if there is any thing that can be done to make the video show to allow me to download.

Don't shoot AVCHD Lite. If you are going to shoot that then you'll need to use iMovie to edit and process it.
Regards
TD

Video doesn't play on ipod...similar threads have not worked

hi,
i've seen some threads that are discussing the same issue but not the same exact problem. the video doesn't show on my ipod, although the sound works. on itunes, both work fine. i've already set tv out to off so it should be working as the support help has suggested. i know that images work fine since i can see photos on my ipod. it's just the video that isn't working.

Still more. I did go to http://forums.adobe.com/thread/892474 and removed the flash player data as suggested and that didn't help
Also, when I go to http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9
and later http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
It shows no version information nor is there any picture activity. Not even a blank gray box
On the first link above (Disable_ActiveX_Filtering) it lists several suggestions. Here they are and what I have or have found
Ensure that the latest version of Flash Player is installed <<<YES - 11.9.900.117
Disable ActiveX Filtering (if you are using Internet Explorer 9) (It is unchecked in IE 10)
Enable Flash Player Add-ons (if you are using Internet Explorer) <ENABLED)
Disable the RealPlayer functionality, Downloading & Recording, if you are using Flash Player 11.3 on Mozilla Firefox. No RealPlayer on computer
Ensure that you have the latest version of Flash Player (if you are using Chrome) Chrome works
Delete all Flash Player browsing data <<<DONE
Remove Flash Player cache <<<DONE
Disable Flash Player hardware acceleration <<<Did so on YouTube but can't get to this on bad sites
Increase the storage limit for a specific website <<<<Can't get to this option on bad sites
Report the issue to the Flash Player forum <<<You are reading this. I reported
THANKS IN ADVANCE

While capturing video shows up as Mp3..how do i fix this.

This is the third time this has happened to me i now have a fairly new mac book pro ive been capturing footage from a Sony Z1 camera via firewire for months now.All of a sudden while capturing it shows up as mp3...can someone please help.

Hi john...while capturing ..I can see the file type says mp3... When I press escape or stop it does not give the option to save ....the save as box doesn't come up ...it just pauses like I was just playing it.
Sent from my iPad

How to record video or use screen capture WHILE capturing audio from Logic??

Hi,
I want to record my self playing guitar and singing using my mac book pro built in camera. I want the audio to come from Logic so I can add whatever effects I want to the vocals. When I say audio from Logic I don't mean recording in Logic and adding it in post. I want it to be on the fly.
What I used to do was use the screen capturing program Snapz Pro. I would screen capture a box around photobooth for the video, and then record while having Logic's audio in the background. It screen captures my entire computers audio. So for example if I get an aim message the bleep would show up in the recording. Or if I raise the volume or lower it the little click sound fx would be in it as well.
Capturing the audio this way let me get Logic's audio effects in my video on the fly. It worked out great....until now! :/
I just got the audio interface "Duet 2". And am using a microphone instead of my mbp's built in one. When ever I tried to record and capture my systems audio - my entire computer would crash. Snapz Pro won't work with the system audio with the interface. It works fine without it though.
I then tried to use Quicktime's new movie recording feature. I see it only gives an option for microphone and now system audio. So I got soundflower to re route the audio but that doesn't help either. This is because when you capture this way you can't hear anything while your capturing. So if I were to record a video and wanted Logics audio in it, I would have to set the output to Soundflower first. So when I record I cant hear myself which defeats the purpose.
So my final question is, how can I record video while having Logic's audio? I don't need to record with the mic, because in Logic the mic audio is going thru the system audio with everything else.
I would like to use a process more similiar to Quicktimes straight movie recording instead of doing an odd way like I used to screen capturing a box around the photobooth screen.
Thanks

use Yawcam from Yawcam.com

Preview doesn't show up in the capture window

When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

Win XP BSOD while capture video on MSI GF FX 5900XT-VTD128

Hello.
I have such a problem. While capture video (overlay mode, 720x576) very
often (but not always) Windows XP crashes on BSOD with the following error:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
STOP: 0x000000d1 (0xF0504000, 0x00000002, 0x00000001, 0xF7A2CE57)
nv4_mini.sys - address F7A2CE57 base at F7A1A000, datestamp 4061d74b.
My system configuration is:
Hardware: MB Epox EP-8RDA3I (latest BIOS version), CPU AMD Athlon XP 2400+,
RAM DDR PC3200 512 MB dual channel (Kingston), Video MSI GeForce FX 5900
XT-VTD 128 (VIVO, Philips SAA 7114). NO overclocking!
Software: Windows XP Prof SP1, DirectX v.9.0.b, Nvidia Nforce driver v.4.24
WHQL, Nvidia ForceWare driver v.56.72 WHQL (default settings), MSI WDM capture driver v.3.08 (late). Capture software: VirtualDUB, iuVCR and any other.
What anyone will advise me?
Thank You.
Best regards, Dmitry.

61.21 driver is a beta driver. its not 100%. wait until they release a full working driver. it will be released on http://www.nvidia.com.

My external HD will not show up on my desktop anymore. I'm on macbook pro 13", OS 10.7. It doesn't show up in disc utilities, nor on another mac, nor on that mac's disc utility. I happened to restart the comp while the HD was connected.

My external HD won't show up anymore on my desktop nor does it get listed in disc utilities. I tried to cennect it to another mac but it doesn't show there either nor in that mac's disc utility. I happened to re-start the computer while the hd was connected and now it doesn't show up anymore. I use it for back-up via Time machine. I could re-format and do the back up all over again but then I need to find it first. Please, does anyone have any solution to this problem?

It sounds as though the external drive may have failed. There's nothing at all wrong with restarting your computer with the external drive connected -- that's a perfectly reasonable and normal thing to do, done by countless users every day without any ill effects.

Video Doesn't Show While Capturing in PrCS4

Similar Messages

Maybe you are looking for