Video doesn't sync with audio on network

Hey all, I'm somewhat of a newbie at using audio with Flash,
so hopefully someone can figure out what's happening:
I have a Flash movie that's about 2530 frames long, that
includes narration (which is broken out into 6 separate mp3 files),
each mp3 file begins playing where the previous one ends. The
entire movie is set for 30 fps.
The video syncs up to the narration perfectly when it is run
from my C:\ drive, but as soon as I copy it over to the network
(where everyone will have to access it from), the animations begin
to lag behind the narration. By the end of the 84 second movie, the
audio has ended at least 15 seconds before the last animation ends.
Any ideas?

I'm assuming that you are using the Sound class to control
the MP3 sounds? If that is the case then they will not be sync with
your timeline and if your animations are too much for the SWF to
stay at the 30fps rate then it will slow down to complete the
animations.
One way to sync them up would be to place them in a layer in
your timeline and then in the Parameters box at the bottom set the
Sync dropdown to Stream.
Then if your movie slows the audio and animations will still
be together.
This is not as flexible as you may currently have it but it
might work for you.
Tim

Similar Messages

  • HT2729 video isn't syncing with audio on rented movie

    I have now tried renting three movies using iTunes on my laptop. Unfortunately, none of the movies have worked properly. The audio is about 10 seconds ahead of the film, so the  sound doesn't sync with the movie.  What can I do? I did get refunds for the other two movies, and will ask for one for this movie as well, but I am trying to figure out why this is happening.
    Netflix and other video services work just fine on my laptop.

    I'm assuming that you are using the Sound class to control
    the MP3 sounds? If that is the case then they will not be sync with
    your timeline and if your animations are too much for the SWF to
    stay at the 30fps rate then it will slow down to complete the
    animations.
    One way to sync them up would be to place them in a layer in
    your timeline and then in the Parameters box at the bottom set the
    Sync dropdown to Stream.
    Then if your movie slows the audio and animations will still
    be together.
    This is not as flexible as you may currently have it but it
    might work for you.
    Tim

  • Audio/Video doesn't sync with FME

    I have been testing FME with a Pundit Pc 2.8GHz w
    512MB Ram running XP w/SP3. I tried using the Osprey 100 with very
    choppy video as a result. I also have tried the Canopus AVDC110
    which has excellent video but the audio doesn't sync up. I've tried
    numerous settings but still have a/v syncing issues. Any
    suggestions would be appreciated.
    BTW-We are usiing a Red5 Server

    I'm assuming that you are using the Sound class to control
    the MP3 sounds? If that is the case then they will not be sync with
    your timeline and if your animations are too much for the SWF to
    stay at the 30fps rate then it will slow down to complete the
    animations.
    One way to sync them up would be to place them in a layer in
    your timeline and then in the Parameters box at the bottom set the
    Sync dropdown to Stream.
    Then if your movie slows the audio and animations will still
    be together.
    This is not as flexible as you may currently have it but it
    might work for you.
    Tim

  • Audio from imported video doesn't sync with mp3 audio imported

    I thought I had a neat way to easily "back up" my audio of an event by using an mp3 recorder on the podium to capture speaker and just recording with on-cam mic at the camcorder, so not to have to mess with wireless mics and jack connections on the camcorder. My thought was that since these are both "digital" recordings of the same event, they would stay in sync. Yet when I put them both in the time line of iMovie, the mp3 sound file does not stay in sync, falling behind. Every sentence or so I have to cut some of the file out to shorten it and bring it back into sync. Any guess why these don't stay in sync?
    PV-GS500 DV tape camcorder, sansa m250 mp3
    Cutting the sound file to keep it in sync worked, and I needed in for an event I just recently did, where the first speaker, who spoke briefly, did not turn on the room mic, and couldn't be heard well by the camera mic. So we now hear perfectly what that first speaker said, but I was disappointed that I had to trim after every sentence to keep the mp3 audio in sync.
    Thanks, Dale

    I'm assuming that you are using the Sound class to control
    the MP3 sounds? If that is the case then they will not be sync with
    your timeline and if your animations are too much for the SWF to
    stay at the 30fps rate then it will slow down to complete the
    animations.
    One way to sync them up would be to place them in a layer in
    your timeline and then in the Parameters box at the bottom set the
    Sync dropdown to Stream.
    Then if your movie slows the audio and animations will still
    be together.
    This is not as flexible as you may currently have it but it
    might work for you.
    Tim

  • Video not in sync with audio or vice-versa

    This is a last ditch effort to try to find some definitive help.  Everyone has a sad story when things go awry with video capture.  Here's mine:  I recommended the Apple platform and iMovie for my wife for documenting a how-to for a particular hair style transition.  Something she can't recapture.  We used a MacBook Pro's built-in camera. All went well until she noticed from the beginning of the daily captures that the audio and video would fall out of sync within clips shortly after she started.  After she was done and mentioned it, I discovered that the six or so clips that make up the project varied in their frame rates (project is set to 30).  One clip with a frame rate of 28 is fine, but the rest have slower frame rates.  The total project length is approximately 15-20 min....
    Detaching the audio from the video and exporting to QuickTime (as suggested by most) makes no difference. I've also seen suggestions about moving the content to MPEG Steamclip and doing "something" with it but I'm not video editing savvy so exactly "what" nyone is supposed to do via that solution is an unknown..
    I've been all ofver the web searching for a way to change all of the clip's frame rates to 30 fps since the one clip at 28 frames is acceptable.  A foregone conclusion.  However, I can't seem to find a way to do this anywhere. 
    Would really like to rescue the two weeks worth of work my wife put into this effort. 
    Any/all help appreciated thanks.

    The basic problem you are facing is the use of the internal camera. It is designed for simple web cam usage rather than movie making. If you are making a Face Time call, the variable frame rate helps you, because when there is not a lot of movement, it will slow down the frames and give you better performance at a lower bandwidth. If the audio is a little off you do not care.
    Long term, you can solve this by using a camcorder that shoots at a constant framerate.
    For your immediate problem, I think that the suggestion to use MPEG Streamclip was a good one.
    Basically, you would be dragging in this file with the variable frame rate and using MPEG Streamclip to save it out as a file with a constant framerate. You should now have a file at 30 fps with audio to match, within reason.
    Try dragging your clip into MPEG Streamclip. Click the PLAY button so you can see that it plays. Then FILE/EXPORT TO QUICKTIME. For Compression, choose Apple Intermediate Codec. Leave the sound setting as Uncompressed. In the Frame Rate box, type 30. Click the check box for Frame Blending. Deselect the box that says Interlaced Scaling.
    Finally, click the MAKE MOVIE button, and give at a name. Save it to a location where you can find it. You can then import this into iMovie if you want, but using FILE/IMPORT MOVIE in iMovie.

  • IChat video not in sync with audio

    Hi Everyone,
    For the past six months I have been trying to resolve issues with the video chat. It all started with me updating my brother-in-law's iMac G5 from Tiger to Leopard. Before the update we were able to video chat with no problems. Since the update the video has been out of sync with the audio. We tried all the remedies that have been posted (setting Quicktime Streaming to 1.5Mbps, limiting iChat bandwith to 500kbps, deleting the plist files in the preference folder) with no luck.
    In the interim we have been using Skype to do our video chats, and that has been working just fine. However it has been bugging me that we can use iChat. We were hoping that the recent updates from Apple (10.5.5 and the Quicktime patch update) would have fixed the issue.
    Now with all the updates we are partially fixed. The video feed that I get now is fine and looks like it is in sync with the audio. However, my brother-in-law sees me out of sync with the audio (the video is at least 10 sec behind the audio, and gets worse the longer we are connected)
    We have tried all that we could think of including using the MobleMe and the .Mac accounts to log in but so far no luck. I'm wondering at this point if it is his modem (about 3 year old) that is causing him to get a delay? We tried connecting the modem directly to the iMac without the router, but it made no difference for the video sync issue.
    The other issue we have been dealing with is his Linksys router (don't remember the model but, it's the one without the wireless capability) causing screen sharing not to work. He has tried disabling the firewall on the router but that has not worked. It will only work if we pull the router off and connect directly
    Any help is appreciated, thanks in advance

    Some modem features such as a SPI filter which checks the Incoming data stream for any app has the potential to get in the way.
    It is not uncommon for the amount of data to arrive faster than the SPI part can deal with it.
    If his router has an SPI filter/firewall then he should turn it off.
    It may pay to Power down all items such as the routers and computer and potentially the modem and restart them all.
    Also try Restarting his Mac with holding down AppleALT+PR until he hears three Start Up Bongs.
    If this does not work get him to access the Linksys and on the front "Set Up" screen he will have an MTU settings. Get his to set this at 1492 (the default is 1500 and should be reduced by 8 each time if changed - it changes the packet size and may help).
    9:48 PM Wednesday; December 3, 2008

  • IPod Video out of sync with audio.

    Hey guys.
    I recently purchased a video ipod and was looking for ways to convert my videos & DVD's to work on my ipod.
    So far I've done
    cucusoft
    psp9
    videora
    pqdvd
    pocketdvix
    quicktime (freezes up on my pc, and takes ages to convert)
    and i've yet to find any way of stopping the audio and video from being out of sync (by anything from half a second to about 7 seconds) with one an other...
    is there a program or technique I could use that will enable me to watch video that is in sync with the audio?
    on a footnote, the quicktime does work but regulalarly shuts down on my computer and takes WAY too long to convert.
    Please help me out here guys as I am reaching the end of my tether.
    Thanks.
    /\Ben/\

    hi -- i've tried nearly all the programs you have, and have finally gotten the pq dvd to ipod video converter to work out of all of them. btw, the xilisoft one does NOT work, and i'm trying to get my money back from them, so buyer beware!
    anyway, i found the issue to be the frame rate -- on movies, i was able to use 30fps successfully (worked for star wars, for example), but on native tv show dvd's (such as sex and the city) i had to use 24fps.
    see if that works for you.

  • My video does not sync with audio how do I get it to work

    My audio does not sync with the video on a product I brought from the itunes store. how can I fix this?

    Hey Faymz1,
    Thanks for the question. I understand that you are experiencing issues with video playback in iTunes for Windows. The following resource provides information regarding this symptom:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Symptoms
    This article pertains to video playback performance issues in Windows Vista or  Windows 7.
    Here are some things to check if, when viewing a movie in iTunes for Windows Vista or Windows 7, you notice that a video appears distorted, intermittently pauses, or has audio that is out of sync with the image on-screen. [...]
    Thanks,
    Matt M.

  • Rendering causes video to de-sync with audio

    So, I'm a fan of making lets play videos. I got everything all recorded with my face cam and a separate audio track to put over that. I synced up the tracks so that they both match up and I have the better audio for my voice instead of what my camera picked up. So, the audio is perfectly synced up with the video. However, If I use any of the render settings like Render In to Out, it causes the video clip (just from my camera, game play footage is just fine) to become de-synced with both audio files. The original clip and the one recorded with my mic. Even stranger. Both audio tracks line up perfectly with each other, the video clip just seems to have moved and I cannot figure out why. I also think that rendering during export works perfectly fine without any kind of distortion (not that I have tested it to make sure). Any theories as to why the program is acting like this?

    glad that got to the bottom of it, yeah, you can copy a clip and then paste attributes like the last commenter said to fix the distort issue. you might also try removing the distort and basic motion attributes if you're going to your native codec and haven't animated or blown anything up. but just for future reference, there is no special default final cut sequence setting. whenever you start out on a new one, you should double check to see what kind of sequence you've created. three ways to go about that (there are more):
    1) the most basic way is in the Final Cut Pro -> Easy Setups... menu option, or if you want more options, then Final Cut Pro -> Audio/Video Settings... option. those both control the same things, but in different ways. play around in that if you're not familiar with it. but what you set there will be the "default" for new sequences that you create.
    2) if you've already got a sequence in your project that you know is correct, you can duplicate that then delete all the stuff in there and start with that.
    3) if you fire up a sequence, then drop a clip in that matches the native codec you want to work with, Final Cut will ask if you want to change the sequence settings to match the clip (unless you've turned that warning off). that'll ensure that you're working in the native codec of your footage, if that's what's desired.
    you might want to start fresh with a new sequence after having done that and then pasting everything you've done into that as opposed to changing the sequence settings on the other one. it might work fine, but it also could have some glitchiness if you don't start with a fresh sequence. final cut is badass, but sometimes a little tempermental when you start tweaking the technical settings (even if you get it right).

  • Captured video not in sync with audio

     
    I capture video and audio from a Sony Beta SX A-75 using the SDI output through Blackmajc card into dual 2.5. We are using DV compression. The audio is out of sync after capture. It is 3 frames off. If I slide the video 3 frames to the right on the timeline , then it looks ok.
    Capture/Input Blackmagic NTSC-DV
    Device Control Blackmajic NTSC 29.97 Hz
    Anyone know what's going on?
    2.5 dual   Mac OS X (10.3.9)  

    Either the sample rate of the audio is off, or, as I suspect, some decks/cameras have to be given an off-set in FCP. Don't remember off hand where that setting is. You may want to check with Blackmagic (Decklink) support about it.

  • Video out of sync with audio when using airphoil

    Hey I was wondering if it was possible for me to use airfoil with a movie. It's just that there is a time delay in the sound there for the video and sound go completely out of sync.
    Note: Airphoil is like using airtunes speakers.Airphoil is an app that allows someone to transmit sounds from any app to a bass station instead of just from iTunes.

    Saad Attieh wrote:
    It's just that there is a time delay in the sound there for the video and sound go completely out of sync.
    yes, many users reported having made that same observation. seems like the app still needs some improvement. on the other hand, it may be a limitation of airtunes ...
    JGG

  • Photo Booth video not in sync with audio

    I searched this problem and saw something about downloading a Combo. I tried that (and the step by step restart, etc that was offered in that discussion) but it will not download on my macbook pro. https://discussions.apple.com/thread/4175034?start=15&tstart=0 It says is cannot be installed on the disk because the volume does not meet the requirements.  I am using OSX 10.8.2. I would appreciate any help. I'm pretty new to the lingo, so the explicit the directions are the better. Thanks in advance for your time.

    *Kenny B* - What did you mean by?:
    Kenny B wrote:
    i think i fixed this by deleting the header title....
    1. Did your Project start with a "Title"? What kind of Title? A simple "Title" or "Title over Video"?
    2. What other video formats did you use to create your project? (e.g.: AVCHD, MPEG2, MPEG4...)
    3. What was the Project's Export setting? (e.g: Medium, Large or Custom QuickTime...)

  • Video not in Sync with Audio

    Watched my first live match today, or I should say tried to. The video was about 2mins plus behind the audio. Nothing worse than hearing a goal has been scored and not seeing it until 2 mins later, also site kept breaking link. Not impressed!
    Solved!
    Go to Solution.

    John,
    Np people are hoping BT will remove it and sort it out once and for all
    sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

  • Some videos not in sync with audio..

    some of the dvd's i put on my ipod have a problem..the audio is sometimes 6 seconds behind whats going on..how can i fix this when converting?

    What program are you using to convert. If it is videora that is probably your problem. There are issues with that program and sound. You might want to try another conversion program if that is thee one that you are using. Hope this solves if for you. I use Streamclip, it is freeware and since switching to that from videora I have had no sound problems. You can get it here free. http://www.squared5.com/svideo/mpeg-streamclip-win.html

  • My iphone 5 doesn't sync with itunes on my pc. it says this computer has  previously been synced to another io6 device or iphone? please help what to do?

    My iphone 5 doesn't sync with itunes on my pc. it says this computer has  previously been synced to another io6 device or iphone? please help what to do?

    The error message you're seeing is likely the other way around -- i.e. something like "This iPhone has previously been synced with a different computer".   There's no problem syncing multiple iOS devices to the same computer.
    However, the reverse is not true for the iPhone --  you cannot connect an iPhone to another computer without it being erased, even if you manually manage music and video.  So, it sounds like you've been syncing your iPhone to a different computer?
    Also, 5.1 (not 5.0.1) is the latest iOS.

Maybe you are looking for