Video doesn't work since upgrade 7.0.4-fix?

the camera works, but not video function now.

To select Video don't just touch Video rather touch it and swipe it to the selected position.

Similar Messages

TS1398 The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade."

Safari for Mavericks doesn't work since upgrade.

Since I did an 'all upgrade' mid-June 2014, Safari is too annoying to use. It just gives me the Top Site pages every time I open, won't load my web archive pages or anything else. (It will load a site if I've closed it as a 'faorced quit and reopened - and then can sometimes get it to do an 'open in new tab' from the reading list only if online, otherwise only does 'top sites'. It All started when I realised it wasn't letting me see any of my downloaded reading lists (watched the download progress so know it did that). I've tried changing all sorts of things (just about everything once then checking ou and in again includng clearing cache etc. in preferences but basically it doesn't accept anything and just defaults back no matter what!
Gave up and using Firefox for this but would much prefer to use Safari if it will only work as it used to - maybe that alway meant it Never let me access reading list offline?

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Istat Pro "Processes" doesn't work since upgrade to OS X 10.8.2

Ever since I upgraded the OS to 10.8, the istat Pro widget on the dashboard doesn't list anything but a stack of empty white squares under "Processes". Is this a known bug?

Thanks CT! Here are the steps from the macrumors.com link:
Steps:
1. Locate your widget, it will be under /Library/Widgets or ~/Library/Widgets
2. Right click it and select: "Show Package Contents"
3. Open Wide.js or Tall.js file in some editor (Wide is for horizontal view, Tall for vertical)
4. Locate the line
Quote:
WideSkinController.prototype.updateProcesses = function(){
var _self = this;
var exclude = "";
if(p.v("processes_excludewidgets") == 'on')
exclude = " grep -v DashboardClient | "; if(p.v("processes_sort_mode") == 'cpu')
widget.system('ps -arcwwwxo "pid %cpu command" | egrep "PID|$1" | grep -v grep | ' + exclude + ' head -7 | tail -6 | awk \'{print "<pid>"$1"</pid><cpu>"$2"</cpu><name>"$3,$4,$5"</name></item>"}\'', function(data){ _self.updateProcessesOut(data);});
else
widget.system('ps -amcwwwxo "pid rss command" | egrep "PID|$1" | grep -v grep | ' + exclude + ' head -7 | tail -6 | awk \'{print "<pid>"$1"</pid><cpu>"$2"</cpu><name>"$3,$4,$5"</name></item>"}\'', function(data){ _self.updateProcessesOut(data);});
Change "PID|$1" to "PID| $1" (Add space before $ sign)
5. Save the changes
6. remove widget and re-add it Dashboard, and it should be fixed

Scanning with HP Photosmart B110 doesn't work since upgrade to 10.6.5

I have a problem here on my HP Photosmart B110a: I can no longer scan via my iMac since I upgraded to 10.6.5. Same story on my MacBook Pro with 10.6.5
I do have an older MacBook still on 10.6.4 which can still scan, so it's clearly an issue in 10.6.5
This printer is a wireless printer, but I tried both via USB and wireless with the same result.
Anyone else with the same problem, and hopefully a solution?

Yes, I experienced this issue today, too
And it does not depend on having a USB or a wireless connection to the printer.
Until either HP or Apple (or someone else) comes out with a fix, the quickest workaround to scan should be to use the printed embedded browser controlled scanning-feature. Just browse to the IP-address (or local name) of your printer. Quite amazing, what this tiny piece of plastic has to offer ...
Cheers!

Airdrop doesn't work since upgrading to Yosemite

Hi,
My wife and I have an MBP each, both running Yosemite with all available patches. If we open airdrop on our macs we both see each other. If I drag a file over her in airdrop and drop it, nothing happens. She doesn't get a prompt and nor do I, the file doesn't seem to appear on her computer either.
If she sends me a file however, it works as expected.
Before Yosemite when I did this it would bring up a bubble asking if I wanted to send, I'd click it, she'd click the bubble asking if she wants to receive it and the file would appear.

Hello nzgeek,
Thanks for the question. After reviewing your post, it sounds like AirDrop works in one direction but not in both on one computer. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Using AirDrop with OS X Lion, Mountain Lion or Mavericks - Apple Support
You won't be able to receive AirDrop files if you have enabled "Block all incoming connections" in the Security & Privacy pane of System Preferences.
OS X: About the application firewall - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

The built-in camera doesn't work since upgrade to osx mountain lion

macbook air late 2010

I have the same issue. I did a clean install of ML and my camera is not recognized on any application. I have a Macbook Late 2008. Any help will be appreciated. Thanks!

After upgrading from it6 to itunes7 my videos doesn´t work

After upgrading from itunes6 to itunes7 my videos doesn´t work. Theres no error message, no reaction. all the music play like befor, only my vids (quicktime), all!! the vids doesnt work after updating..i hope, that someone could help me..
Many thanks
Cross

hmmmm. let's try checking to see if they will still play in your current version of QuickTime.
in itunes, right-click on one of the videos that is causing the grief, and select "Show in Windows Explorer".
right click the icon of the file in the Explorer window that comes up and select "Open With ...", and try to open it with your QuickTime player. does it play there or do you get funny business with that too?

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.
Can someone help me?
Thank you!

Got the phone direct from the Apple website, so I assume it was unlocked, and it had been on giffgaff ever since but I don't see why that's a problem?
The carrier was automatically selected as Free and is up to date.
There seemed to be no problem that the SIM was being used in an iPhone 4 and my friends in exactly the same situation (e.g. arriving in France and moving over to the Free network with iPhone 4's) have had zero problems with their 3G network; it just seems to be me.
The Free Mobile Network is included on this list which I guess means that they are Apple-approved? iPhone: Wireless carrier support and features
How do I find out whether or not I would need to manually configure an APN? I'm not even sure I know what that is.

After upgrading from ITunes6 on ITunes 7 my videos doesn´t work

after upgrading from ITunes6 on ITunes 7 my videos doesn´t work. there are no error messages, popups or ballons. songs are no problem, only the videos?!
Can somebody help me?
Thanks
Cross

hmmmm. let's try checking to see if they will still play in your current version of QuickTime.
in itunes, right-click on one of the videos that is causing the grief, and select "Show in Windows Explorer".
right click the icon of the file in the Explorer window that comes up and select "Open With ...", and try to open it with your QuickTime player. does it play there or do you get funny business with that too?

Realplayer "Download this Video" doesn't work on Firefox

Realplayer "Download this Video" doesn't work on the latest vesrion of Firefox

I upgraded Firefox from the latest to the latest. I have all the current flash plugins and reverted to RealPlayer 15 because I'd lost all my thumbnails in Windows explorer with RealPlayer 16.
Funny how RealPlayer 15 works fine with Internet Explorer and not Firefox. Everything worked very well up until this current cycle of continuous upgrades with FF and the addons. Two upgrades ago (on everything) everything worked perfectly. Now, everything is questionable.
Believe me, I have tried everything, every combination to fix this without something else going haywire and it can't be done at this point.
If I want to download vidoes in RealPlayer I use Internet Explorer 8, for everything esle I try to use Firefox, but quite frankly it's slower than Internet Explorer.

Encoded video doesn't work on Toshiba Blu-ray disc player

I have a problem that I am trying to encode a sequence of frames in a video container , but the encoded video doesn't work on toshiba blu ray disc player .. I am using the following ffmpeg command to encode frames and convert them to a video:
ffmpeg -i "C:\ManVsWigan\Frames\%d.png" -vcodec libx264 "C:\ManVsWigan\encoded.mp4"
I tried multiple video codecs but no luck yet
"-vcodec mpeg4"
"-vcodec mpeg2video"
If you have any idea please help me

The BluRay player leverages parts of Windows DirectShow but won't serve very well as a general player since Windows will load other players for the majority of media formats.
You can get away with a limited amount of tampering of the BluRay's players tolerance of media files until you violate some far away written DRM safeguard and kneecapping the BluRay player from doing anything.
If you're trying to validate your ffmpeg composed tests of your content as part of the editing process, you're better to avoid relying on the BluRay player that is purposed for narrow replay of licensed content and equipped with oversensitive safeguards susceptible to malfunctioning from the invasions of video pirates like you defined by studio executives.
You and I understand you're not a pirate but chances aren't being taken.
Whether you just dowloaded FFmep in the macho exe format or part of the millions of other packages that include it, you can tune your players to codecs pretty easily with the KLite Codec Manager or the Registry.
Chances are you already know about KLite since editing video on Windows eventually requires it and its hard to walk down the street without eventually kiceking over a copy. But just in case you've been living on a Martian cave with your hands over your ears, snag a mirrored copy from: http://codecguide.com /download_kl.htm
I like KLite more than others because it is fairly unobtrusive and avoids stomping over other media tools the way Adobe Premiere or Sony Vegas enslaves Windows and can neuter BluRay codecs without always adequately replacing them. I can cite threads on the matter but just googling for anything such as "Adobe Premier killed my BluRay" or "Sony Vegas ruined Windows" will usually return desperate strings of posts long enough to wrap around Jupiters equator.
For general maintenance of Windows poor codec management, grab this noninstalling executable http://www.nirsoft.net/utils/installed_codec.html to determine if Windows believes it has the same codecs you thought it did and you'll likely be surprised by the fine tuning you'll need to perform.

Photo booth doesn't work since lion installed

what's up. photo booth doesn't work since i dowloaded lion. Help

aquaman wrote:
My mac IS up to date.
No reason it should have stopped working. Maybe a problem waiting to happen and an upgrade pushed it over the edge. Provide some specs on your Mac, but I would really advise making an appointment at the Genius Bar at your local Apple Store.
Good Luck
Pete

Microphone has stopped working since upgrade

Microphone doesn't work since os upgrade. It will work, though, when my earphones are plugged in. Any ideas?

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Video doesn't work when calling from Jabber to DX650

Hi,
I just added a DX650 to our CUCM 9.1.2. When I call from either Jabber to the DX650 or Lync to DX650, the video doesn't work and the call is audio only. The message i'm seeing on Jabber is something like "the other endpoint is not accepting video." Sorry i don't remember the exact message. Has anyone seen this issue before? Thanks!

Lync is not standards based and has proprietary codecs for video. You will need a Expressway with the MS Interop key to get video both ways.
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-2.pdf

Video doesn't work since upgrade 7.0.4-fix?

Similar Messages

Maybe you are looking for