Video downloads process multiple times?
I have downloaded two of the BCS Championship games and both are about 2 gigs in size. After the download completed the files started processing as expected. When processing was done the progress bar showed 100% complete but the status under the progress bar still said "processing". About an hour later the progress bar went back to 0 and started over. This occurred with both files. Right now I am on the third processing event on both files. These are the first two videos I downloaded, is this normal? Each processing event takes about 3 hours. Its pretty frustrating.
Also, during each instance of processing I had to restart my lap top because the computer froze, I wouldn't expect this to effect the processing but maybe it did? So far the download/processing time for each file is approaching 16 hours. Any help?
Do you have any security software (anti-virus, firewall, etc) on your computer? If so, it may be interfering. Norton, I've found, especially causes issues. This may help:
iTunes for Windows: Connection Issues when using Internet Filters, Accelerators , or Firewalls
http://docs.info.apple.com/article.html?artnum=93434
Or, just simply disable them completely and try again.
Also, if you're connected to the internet by aid of a router, try disconnecting it and connecting directly via your broadband modem. See what that does.
=)
Similar Messages
-
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
Download error under apps. After following download steps multiple times still showing error message.
Hi There,
Kindly try the below mentioned links.
Creative Cloud Help | Download Error in Apps tab of Creative Cloud Desktop Application
Creative Cloud - Download error - stubborn error
Thanks,
Atul Saini -
Downloading Songs Multiple Times.
I have been transferring music to my new laptop and now Itunes keeps downloading the same songs multiple times. How do I stop this?
I should probably clarify, too, that these songs will play at first after they're downloaded. It's usually 1-2 days later that this will start happening, and the song is no longer available until I download it again. Then the cycle just repeats every few days.
-
i can't download the 7.1OS on my iphone! i've tried multiple times on my itunes & my iphone and at first it goes soooooo slow (estimated time 5 hrs on my itunes!) and then it fails everytime.
on my itunes, it says something about a network error....
help!!I don't have any of that -- i have to update through itunes because my phone has an issue where i have to restore it, and before i can restore it, it forces you to update.
The update download shows 1.13 GB and anywhere from 13-15 hours to download.
the download has failed three times, and when it fails it doesnt resume where it left off, it starts over again.
I had let it download all day, and it was down to under 30 mins left and it failed (said it lost network connection) -- and I had to start all over again. Right now it is showing 15 hours remaining, and it is literally downloading at the rate of about 0.1 MB every 5 seconds.
And no, there is nothing wrong with my connection , i have FIOS and download everything else very fast.
In the meantime, I have no phone working at all because im forced to do this before i can restore it. -
Itunes music and videos online skip multiple times throughout
I noticed this problem a couple of weeks ago and it has gotten worse in the last couple of days. Whenever I watch videos online they will freeze up but the sound will keep going. Also, when I listen to music on itunes the song will skip multiple times, about every 20 seconds.
I have looked at my activity monitor to make sure I don't have any programs that aren't in use and up and running. I have cleared out my cache files. I have plenty of free disk space (this computer is brand new)
I also have made all of the necessary updates to my computer. Itunes skipping only started happening when I updated to the newest version (10.1.1) last week.
Could anyone please tell me what I can do so everything stops skipping?!?
Thank you!Whenever I watch videos online they will freeze up but the sound will keep going.
Make sure you are using the latest versions of Perian, Flip4Mac, VLC, Real Player and Adobe Flash Player.
when I listen to music on itunes the song will skip multiple times, about every 20 seconds.
Itunes skipping only started happening when I updated to the newest version (10.1.1) last week.
Could anyone please tell me what I can do so everything stops skipping?!?
Try the iTunes forum area - http://discussions.apple.com/category.jspa?categoryID=149
(this computer is brand new)
You can always call Apple tech support. You have 90 days of free support. If you have Apple Care it's 3 years. Either way, take full advantage of it. -
Firefox opens the download window multiple times as I'm typing in a query on Google.
I can't get through typing in a query on Google without Firefox opening the box that would appear if I'd clicked on a "download" link. It opens a download called "search." It happens multiple times as I type in my query as Google Instant searches for it. It makes me unable to keep typing until I click cancel on these windows, sometimes up to 30 times.
Hi
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
[https://support.mozilla.org/en-US/kb/Options%20window Options] -
1. Is there any possibility to cache videos on a tablet or smartphone.
2. The download time is very bad. So it is not possible to watch videos! But there is no speed problem with the connection itself! is there any possibility to solve this problem?
Thanks for helping.When the QuickTime blue Q icon appears for an extended time it means the file has lost its "Fast Start" properties.
http://www.thelittletramp.net/Home/Home_files/websitewelcome.mov Does not fast start so the Q will stay on the page until the entire file downloads. Same issue on J-Five file. The others do have fast start.
The fix for broken fast start files is simple:
Open them with QuickTime Pro and use "Save As". Keep the original name and save them to your Desktop. Upload these new files to the exact directory as the original and "replace" that old version. -
Single file is processing multiple times
Hello All,
I am working on a File-IDOC Scenario.
I have a strange situation that when I place a .CSV file in the FTP server once and the File adapter is picking it up and when i check the SXI_MONITOR it appears twice or some times thrice and the contents are same in all the messages.
After processing the file it will be deleted by the adapter as per the parameters set in the channel.
Can any one help me out in this?
Regards
HariHi,
Thanks for your reply.
User who places the file on server assured me that he did not place it twice.
and also the problem was not occured for all the files and only for some files.
In that case will there be any way to check for the duplication of files.
Best regards
Hari prasad -
Stopping embedded video from loading multiple times
Hi,
just started using Edge Animate. I have some experience with Flash and After Effect so the layout is pretty familiar to me. I have no background in coding so I am very happy that it generates codes for me.
My goal is to make a simple html5 site with links / embedded videos to my contents (500 and vimeo). I copied some codes used for Youtube embedding, sub'd the url with vimeo url, and it worked fine. I used a "play video" button on the main page to trigger loading the video page (see my code below).
It worked great the first time I clicked the button and went to the video page. However, upon returning to the main page, and click the "play video" button again, a duplicate copy of the video is loaded right below the video loaded upon first click. This occurs for as many times as I click the play video button.
Anyone knows how to fix this?
Thanks
Pako
sym.play("VideoPage");
var youtubevid = $("<iframe/>");
sym.$("vcontainer").append(youtubevid);
youtubevid.attr('type','text/html');
youtubevid.attr('width','500');
youtubevid.attr('height','375');
youtubevid.attr('src','vimeo code');
youtubevid.attr('frameborder','0');
youtubevid.attr('allowfullscreen','0');Adjust the line
sym.$("vcontainer").append(youtubevid);
to this
sym.$("vcontainer").empty().append(youtubevid);
The addition of the empty() method is to make sure it clears out the container on successive clicks.
hth
Darrell -
Possibly downloaded xcode multiple times
Hi,
I'm new to using apple products but I think I made a mistake downloading xcode. I'm not sure what exactly I did but I believe I may have duplicate files on my system and I'm wondering is there a way to investigate this to find out and then to remove them as the xcode download is quite large.
Thanks for any help in advance.Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
I cannot get the welcome screen to pop up so that I can complete the download of Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.4; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.3; OfficeLivePatch.0.0)After you download '''Firefox Setup 3.6.3.exe''', you must double click on this file. Usually, you can find this either on your desktop or in your Downloads folder.
Your Downloads folder is located inside Documents. -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
Element showing Multiple times in SOE.
Hi,
I have added one element called 'Basic' one time only in element Entries. But it is showing 2 times in SOE report and Run Results also.
How to remove that. Pl. help.
Thanks in advance.The Element was processed multiple times in the Payroll run and hence you can see the element twice in the Run Results. The possible reasons could be
1. Element was prorated.
How to check : Check whether the Start Date and End Date were populated in the run results screen for the two entries of the element.
2. Multiple Element entries were created for the Element which is ruled out as you confirmed that there are no multiple element entries.
3. Run results were triggered due to Indirect Results.
you need to fire some queries to find out this.
select * from pay_element_entries where element_entry_id in (select source_id from pay_run_results where run_result_id in (<id1>,<id2>) )
where id1 and id2 are run_result_ids of the two run result entries for the element.
Performing above checks should give you the reasons.
Regards,
Sharath -
Pieces of servlet translated multiple times.
Whatever that means. I don't know how else to describe it. Here's what happens. I have jsp pages that include servlets. The servlets insert data into an Oracle database and then query the database and process the retrieved data into list boxes which are then displayed on the jsp page. Due to the fact that duplicate records are appearing in the database, I put some checkpoints in my servlets to see how they were being processed. Here's a portion of a servet as an example:
The servlet starts like this:
package AgiClasses;
import javax.servlet.*;
import javax.servlet.jsp.*;
import java.util.*;
import java.io.*;
import javax.servlet.http.*;
import java.sql.*;
import oracle.jdbc.pool.*;
import oracle.jdbc.*;
import javax.naming.*;
import javax.sql.*;
public class AgiServlet52 extends HttpServlet {
public void init(ServletConfig config) throws ServletException {
super.init(config);
// Process the http Get request
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
try {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
At this point a connection to the database is created. Then I will add a line like this:
System.out.println("Checkpoint 1");
Then records are inserted into the database. Then another checkpoint:
System.out.println("Checkpoint 2");
Then another query, followed by another checkpoint:
System.out.println("Checkpoint 3");
And so on for approximately 5 or more checkpoints. After I access the jsp page that includes the servlet, I check the Start Tomcat command window to see which checkpoints were printed. Usually I see output like this:
Checkpoint 1
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 4
Checkpoint 5
Checkpoint 4
Checkpoint 5
Checkpoint 5
It's not usually that bad, but some variation on that theme of duplicated checkpoints and sequences of checkpoints. None of these checkpoints are included in for or while loops.
Not only are these checkpoints being processed multiple times, but so are some of my queries, resulting in duplicate records being inserted into the database.
I've been grappling with this problem for days and it's ruining my life. Please help.
Sincerely,
LoganThank you very much for the help. Here is a JSP that includes a servlet:
************* Begin JSP ***************
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>Applied Genomics</title>
</head>
<BODY BGCOLOR="33ffcc" topmargin=5>
<div align="center">
<table border=0 cellpadding=0 cellspacing=0>
<tr><td colspan=11 class=tditem align=center>
<font size=6>Score Compaction Criteria Processing</font></td></tr>
<tr height=25>
<td colspan=5 onmouseover="bgColor='#ffffff'"
onClick="top.location='../Pages/TissueStainGroups.html'"
style="cursor:hand" onmouseout="bgColor='#33cccc'" bgcolor="#33cccc"
align="center" valign="center">
<b>Return to Score Compaction</b></td>
<td width="1" align="center">�</td>
<td colspan=5 onmouseover="bgColor='#ffffff'"
onClick="top.location='../Pages/AnalysisMain.jsp'"
style="cursor:hand" onmouseout="bgColor='#33cccc'" bgcolor="#33cccc"
align="center" valign="center">
<b>Return to Analysis Main</b></td>
</tr></table>
<br><br><br>
<font face="Arial" size=+2>
Processing...<br><br>
<jsp:include page="/servlet/AgiClasses.AgiServlet62" flush="true" />
</font>
</div>
</body>
</html>
*************** End JSP ***************************
Here is the code for the servlet that is included:
************** Begin Servlet ***********************
package AgiClasses;
import javax.servlet.*;
import javax.servlet.jsp.*;
import java.util.*;
import java.io.*;
import javax.servlet.http.*;
import java.sql.*;
import java.text.*;
import java.util.Date;
import oracle.jdbc.pool.*;
import oracle.jdbc.*;
import javax.naming.*;
import javax.sql.*;
public class AgiServlet62 extends HttpServlet {
public void init(ServletConfig config) throws ServletException {
super.init(config);
// Process the http Get request
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
try {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
Properties prop = new Properties();
prop.setProperty(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.fscontext.RefFSContextFactory");
prop.setProperty(Context.PROVIDER_URL, "file:/JAVAFILES/JNDI");
Context ctx = new InitialContext(prop);
OracleConnectionPoolDataSource ocpds = (OracleConnectionPoolDataSource)ctx.lookup("AGI1");
PooledConnection pcon = ocpds.getPooledConnection();
Connection ocon = pcon.getConnection();
String sql, sql1, sql2;
sql = "DELETE from zQueryTable2 where NumField1 = 1";
PreparedStatement pStmt = ocon.prepareStatement(sql);
pStmt.executeUpdate();
Statement stmt = ocon.createStatement();
// Create 13 variables from parameters received from a form.
int [] checkedYN = new int [13];
// Checked = 1, Not Checked = 2
int antiOn = (request.getParameter("antiChk") != null) ? 1 : 0;
checkedYN[0] = antiOn;
int preOn = (request.getParameter("preChk") != null) ? 1 : 0;
checkedYN[1] = preOn;
int proOn = (request.getParameter("proChk") != null) ? 1 : 0;
checkedYN[2] = proOn;
int dilOn = (request.getParameter("dilChk") != null) ? 1 : 0;
checkedYN[3] = dilOn;
int resOn = (request.getParameter("resChk") != null) ? 1 : 0;
checkedYN[4] = resOn;
int dblockOn = (request.getParameter("dblockChk") != null) ? 1 : 0;
checkedYN[5] = dblockOn;
int organOn = (request.getParameter("organChk") != null) ? 1 : 0;
checkedYN[6] = organOn;
int classOn = (request.getParameter("classChk") != null) ? 1 : 0;
checkedYN[7] = classOn;
int diagOn = (request.getParameter("diagChk") != null) ? 1 : 0;
checkedYN[8] = diagOn;
int mod1On = (request.getParameter("mod1Chk") != null) ? 1 : 0;
checkedYN[9] = mod1On;
int mod2On = (request.getParameter("mod2Chk") != null) ? 1 : 0;
checkedYN[10] = mod2On;
int mod3On = (request.getParameter("mod3Chk") != null) ? 1 : 0;
checkedYN[11] = mod3On;
int scodOn = (request.getParameter("scodChk") != null) ? 1 : 0;
checkedYN[12] = scodOn;
System.out.println("Checkpoint 1.");
// Insert the 13 variables into a table
int i = 1;
for(int j = 0; j < 13; j++) {
sql1 = "INSERT INTO zQueryTable2 ( NumField1, NumField2, ListOrder ) ";
sql2 = "VALUES (1, " + checkedYN[j] + ", " + i + ")";
sql = sql1 + sql2;
stmt.addBatch(sql);
i++;
System.out.println("Checkpoint 2.");
// Insert a date into the table.
String dtFrom = "0";
if (request.getParameter("dateFrom").equals(""))
dtFrom = "01/01/1990";
else
dtFrom = request.getParameter("dateFrom");
sql1 = "INSERT INTO zQueryTable2 ( NumField1, NumField2, DateField1, ListOrder ) ";
sql2 = "VALUES (1, 0, TO_DATE('" + dtFrom + "', 'MM/DD/YYYY'), " + i + ")";
sql = sql1 + sql2;
stmt.addBatch(sql);
System.out.println("Checkpoint 3.");
i++;
// Insert another date into the table.
String dtTo = "0";
if (request.getParameter("dateTo").equals(""))
dtTo = "12/31/2099";
else
dtTo = request.getParameter("dateTo");
sql1 = "INSERT INTO zQueryTable2 ( NumField1, NumField2, DateField1, ListOrder ) ";
sql2 = "VALUES (1, 0, TO_DATE('" + dtTo + "', 'MM/DD/YYYY'), " + i + ")";
sql = sql1 + sql2;
stmt.addBatch(sql);
// Process the batch
int [] updateCounts = stmt.executeBatch();
// The batch size is always 15.
System.out.println("Batch Size: " + updateCounts.length);
stmt.close();
System.out.println("Checkpoint 4.");
out.println("<br>Processing complete.");
ocon.close();
System.out.println("End of checkpoints.");
ocon.close();
} catch(NamingException ne) {
System.err.println("Naming Exception Error: " + ne);
} catch(SQLException sqle) {
System.err.println("Error connecting: " + sqle);
// A post request calls the get request because they do the same thing
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
doGet(request, response);
****************** End Servlet **********************
The checkpoints output for this JSP-servlet is this:
Checkpoint 1
Checkpoint 2
Checkpoint 1
Checkpoint 2
Checkpoint 3
Batch Size = 15
Checkpoint 4
End of checkpoints.
Previously I had some JavaScript and another jsp:include in this JSP, and the checkpoint output was incorrect but in a different sequence. Every time I change the JSP, the checkpoints come out in a different order. But for each version of the JSP I test, the checkpoints order stays consistent, though always wrong in some way.
Save me!
Maybe you are looking for
-
I have the Mac OS 10.9.4 I am unable to read PDF's, so thought I would download the latest version of Adobe Reader. It will not install. Is it comparable with my Mac OS?
-
VBS Script to update Acrobat via SCCM (SMS)
I posted this on the wrong forum so I was sent over here... Good day everyone. So I found the following script and have tested it manually on a computer of computers, but somewhat failes via SCCM: Dim objShell, RegLocate Set objShell = WScript.Create
-
If I delete a purchased item, would I be able to download it again?
Hi, Was just wondering, if i delete a purchased movie/video from iTunes from my computer (and actually remove it from my computer, meaning goes to my trash) would i be able to download it again from iTunes in the future? I ask this because when i rem
-
Is that possible ? (Chat Program)
I just found a great source code for a basic Server/Chat Program, but both works on a Frame... I want the Client to run on an Applet (Web Page) and the server to run on a PC in a Frame. Is that possible... ? If yes, how do I do that? I can send the s
-
hi there; i know the concept of class loader & instantiate working. may i know, what is the best situation to use <class loader> or <instantiate> method? i am currently being confused by this method. appreciate if you can give scenario to describe? t