Video drop zone?

does any1 know how to make a master template with a video drop zone?

In the library/contents pull out a drop zone object.
Then FILE/Save project as template.
Make sure to add a new theme.
Relaunch FCP
In the viewer at the bottom select master templates and look for your theme. The template will be in there.

Similar Messages

Putting video clips in template drop zone

I can't drag my video into the control video drop zone. the computer won't let me drag the video clip anywhere...what could be limiting my ability to do this?

Are you working in FCP or Motion? If FCP, are you working with one of the Motion Master Templates? Also, what is the source of your video and what are it's settings?
-DH

Drop Zone with Audio

Is it possible to create a video Drop Zone for a template in FCP that plays with audio. I am doing a 16_9 Background with 4_3 Drop Zone, but when I use it in FCP and drop the video it plays without audio. Am I missing some preference or is it just not possible to create this?
Thanks

That's a real shame: having to edit the audio separately beat the convenience of the drop zones in templates.
Thanks Andy.
Enrique

How do you adjust the timings of a video placed in a drop zone?

Hi,
I brought a template online and have dropped a video into one of the drop zones. It plays fine, although I would like it to start in a different place and fade the sound in and out.
How do I go about doing this?
Thanks

Trim the Out point of your video so that the entire clip is not in your project (this is so you can slip the video and audio). This step may or may not be necessary if the drop zone is not the same length as your video clip.
Open the timing pane (F6). Hold down OPT while dragging the layer to slip the clip in the project. This will also slip the audio. Once you have it in the right spot, click the audio display button at the bottom of your timing pane (it looks like a little speaker). This will show you your audio track.
Select the audio layer and go to add behavior/audio/audio fade in out. In the inspector, adjust the behavior to taste.
Andy

Drop Zones in FCPX used to be videos, now show icons

I made a long video using motion transitions and build-ins with drop zones. When originally applied, you dropped them onto the timeline above the vide you wanted them to work with, and the video would play behind it with it showing through the drop zone portions. It was a very nice effect. I have to reexport my movie, and I'm now updated with FCPX 10.0.5 (I believe I lasted exported at 10.0.2 in Lion), and now the dropzones just show the downward arrow, the video won't display through.
Anyone else encouter this? Any solutions? Adding them into the dropzone frame just creates still images, which is stupid.
Any help would be greatly appreciated.
FCPX 10.0.5
ML 10.8.1

Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
http://www.digitalrebellion.com/prefman/
With Preference Manager, you can backup the Prefs when FCP X (or any of the Apple Professional Applications) are working normally. Then when either of the applications are acting strangely, Trash the Preferences, then Restore from your backups (just a mouse-click).
If you trash the prefs and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then your backups are up to date.
Doesn't fix every problem, but it fixes a lot.
Andy

Drop Zone will not play video - only still frame

I have a generator template with drop zone, in and out.
When I select the video clip to use in the drop zone it shows as a still freeze frame - video does not play. Only the first frame displays.
This was a bug that Apple said is fixed in the last version... it is still a problem for me.
Anyone know about this?

Motion Template.
To quote FCPX 10.0.08 "Drop zones are no longer reset to the first frame of video after application restarts".... this is in the 'What's New' in the App store.
But if you use a drop zone in a generator template, FCPX only displays the first frame - no video. Many users reported this bug on the eearlier version. Some tried using a compound clip but this did not work for me. The bug is nto fixed.
I need to select a part of two different clips in the timeline on both sides of the template to ceate a transition - one ingoing and one outgoing.

Drop zone video playing too fast

I am building a Motion title sequence with a drop zone for video. I placed it into FCPx as a connected clip (purple timeline box), and associated the video under it to the drop zone. It all works except the video dropped in plays super fast, far out of sync with the audio below. Not sure why.
My FCPX timline, source footage and motion file are all the same frame rate, 23.98. Any ideas?

Where can you place a marker en set the project loop end. Because can place a marker and then go to edith marker. But i see no list as above?
1. Deselect any objects in the Timeline. Select Mark/Markers/Add Marker. If that menu item is not available, make sure there are not layers selected in the Layers window.
2. A timeline marker will be created at the playhead. When the playhead is on that marker, the Edit Marker menu item will become available.
3. Select Mark/Markers/Edit Marker. This brings up the dialogue where you can Name, Comment and select the marker type. Choose Project End Loop from the Type menu, then click OK.
4. Drag the Marker to the end of the timeline.
Adrie, I have not encountered your problem with freezing drop zones. In the past I have had many drop zones playing simultaneously, so it should work. If you suspect that you have a bad install, you should probably reinstall it before troubleshooting any further to eliminate that possibility. I am running a fresh install of 5 on a system that has never had 4 on it.
Where did you find that tutorial? do you have a link.
Ripple Training - Motion 5 - Rigging and Publishing

CHOPPY VIDEO ON MENU AND DROP ZONES

I am ready to burn the DVD but the video on a menu page is very choppy. The drop zone is rotating slowly, etc.
Any ideas on why this is happening? Any ideas on how to fix it?
Thanks.

Steve:
As good practice save the project as a disk image (File->Save as Disk Image menu option) instead of burning directly to disk. This allows you to play the disk image in DVD Player to verify that the encoding of the project was good. If the project plays OK in DVD Player you can then burn that disk image to disk with Disk Utility at the slowest speed available. If there is any problems with the disk playing it can then be narrowed down to the burn process. Also use the top grade media. Verbatim, Taiyo Yuden or Maxell -R are the most recommended brands in this forum.

Video in drop zone breaking menu transition...

this seemed simple.
i have a drop zone on my main menu with a quicktime in it. no interactivity. also on the main menu is a text button. that button triggers a custom transition/wipe that i built in motion. eveything worked fine, until i placed the drop zone with the quicktime: what happens is that when the menu button is selected, the drop zone clip jumps to a different point, then applies the transition and goes to the track. but that's not all. when going back to the menu, the drop zone clip will go to somewhere in the middle of that clip, then go to the head...
the menu length is set to the length of the qt in the drop zone.
if i delete the drop zone, the trans works fine.
any ideas?

Hi:
The transition in your final disc will be a MPEG-2 video file, it will not be created on the fly while playing. That means that DVDSP will use a frame from your menu as starting point to create the transition "to the movie" video file and another one to create the "from the movie" transition. The same happens when you use a movie as background in your menu.
I don't know what rule uses DVDSP to select what frame to choose to build the transition, but you cannot expect that your transition will start in the frame that you are seeing in any moment. Do you know what I mean?
Alberto

Dropping Video into a drop zone...

Is it possible to put video in a drop zone without losing any qaultiy? I have video clips that I insert into drop zones that are over 1GB, but once inserted, the file size of my project only says 256MB. I would like that video clip to be uncompressed for best quality.

If your working in DVD SP, all video assets are converted to Mpeg2, if not before bringing it into DVD SP, then during the build by compressor 2.
If your exporting out of FCP, using QT conversion, STOP! You should be using "QuickTime Movie" as your export, (first option in FCP 5 export.) You should also, to save time, uncheck the self contained movie option, this creates a reference movie that compressor can use and take a fraction of the time to export.
Using QuickTime conversion just adds a whole new layer of compression to your video, using the QT Movie export doesn't and references the source footage, (no loss of video quality. This file is then used by Compressor 2 to create the Mpeg 2 file for DVD SP.
PS: don't remove any of the FCP render or source files, till Compressor is finished creating the Mpeg 2 file. The Mpeg2 file that is created, doesn't need any of the source footage to work in DVD SP, (like the FCP footage and reference movie does.)
Using Compressor as a stand alone App, gives you far better control over the quality of the video asset, than letting DVD SP automatically use Compressor during the build, plus it save time during the build, due to the fact that all assets are already in Mpeg2 format.

Adding Pictures/Video to Drop Zones

Hello All,
I've created a drop zone in motion and saved it as a master template. However when I bring it into FCP I have no idea how to place my footage into the drop zone. Whenever I drag something into the canvas it just overwrites the template.
Also, can images/footage be resized and animated within a drop zone?
Thanks!
rT

Thanks Jerry, I can't believe I missed that.
It seems though I can only animate the drop zone as a whole and not the picture/ video inside the drop zone. Is there a way to do that. For example I may want a picture inside the drop zone to scale up a bit. However the scale parameters on the motion tab only control the drop zone as a whole - not what is within it. Is threre any way to resolve this?
Thanks.

Drop Zones: Video and Alpha Channels

Is it possible to create a drop zone where the asset is a video clip that contains transparency by way of an alpha channel such that portions of the video allow for the background image to show through?
I am familiar with setting up drop zones and custom shapes and I have used static images with transparency, but I've never done the same with video.
I am away from my system right now or I could test this myself. Thanks in advance for the help!

hi
depending on how complicated your shot is, you may be able to get away with simply placing the image within the frame on top of the background shot. Then resize down to fit. You may then need to tweak its corners using the corner pin tool to get it to sit in the right perspective plane. You may find you need to soften the edges of the top layer image so its not so sharp and hard. For this you probably would need to add a mask and soften its edges. Then you might need to add some noise and/or colour correction to make it sit naturally with the background image. and finally if there are any shadows cast over the picture frame you will need to add them back over the new image. You can use a black shape, with its opacity cranked down with a blur filter on it.
The manual describes all of these process pretty well.
hth
adam

Drop Zone Video Preview

I've gone into settings and changed the timeframe for motion but the drop zone video still plays 30 secs, but I only want it to play for 5 seconds, does anyone know what I'm missing.
Thanks

Hi
It is at least possibly to use some buttons like this - But to get this right I had to make special button movies from the big original movie.
My problem started when I used the original movie that I could not go back far enough for the last buttons and not precise enough either - so by making the small button movies I got 100% control.
Yours Bengt W

Video length in drop zones

Is there a limit on the length of videos I can put in drop zones?

Sue,
I don't think so-why do you ask?
There is - and I've run into it - but I don't remember right now exactly what it is.
Setting the duration of a movie in a drop zone
http://docs.info.apple.com/article.html?path=iDVD/6.0/
en/260.htm
That is a dead link because you said "htm" - it should end in "html". The iDVD 5 Help article is at: http://docs.info.apple.com/article.html?path=iDVD/5.0/en/260.html

Scripting video in drop zones? possible? necessary?

is it possible to have different video play in a drop zone when a viewer returns to the menu. is this something that can be scripted? Or do i have to create a separate menu for each diferent piece of video in the drop zone and assigne that menu as the return point for the next menu with a different video in the drop zone at the time of returning from the end of a chapter? what do you think?
-trevor

You can target loop point from the track and the drop zone will be the same length in - in other words lets say the drop zone is a 30 second clip and you set the loop point in the menu to 20 seconds into the menu if you target the loop point via a script as a return the drop zone will play from 20 seconds on (as will the rest of the menu)
But it is really not very elegent nor does it sound like what you want - each drop zone will have to be timed
The script is
Jump Menu :: (Loop) //loop is a checkbox option in the inspector

Video drop zone?

Similar Messages

Maybe you are looking for