Video editing causing enormous disk usage for Time Machine

As I do a lot of work with iMovie, my hard disk is rapidly running out of space. Should I be excluding certain folders from backing up by Time Machine?
Anything I can do to recover the hard disk space?

If TM backs up while you are editing a large file of any type, yes it will backup the file.
I suggest using a separate folder for all your video editing and exclude it from the TM backup.
As to recovering HD space, that's a touchy point, but once you exclude your video files, at least it won't fill up any faster than normal.
I would let TM take care of deleting old files in the normal manner.
The only work-around would be to delete the entire TM backup and start over. If you use a new HD you can still recover data from the old TM backup until you are sure you never need it.

Similar Messages

Can't install ML. Disk used for time machine

When I choose my machintosh HD drive to install mountain lion says "This disk is used for time machine backups". HELP!!!

Although this may be too late for the OP, here's the answer: If you see a Backups.backupdb folder on your main harddrive, either remove it or rename it. That seems to be the only qualifier for calling a disk a Time Machine Backups disk as far as the installer is concerned.

Why no disks listed for time machine

I got my MACBOOK yesterday. When I ran time machine for the first time. it shows: A storage for time machine backups isnt set up. I clicked "set up time machine" , and click: choose backup disk. Howeve, none disks are listed, neither the internal HD, nor a portable disk connect to my MAC.
Don'tknow whether i missed anything, or just did something stupid. Can anybody help? Thanks a lot!!

I have the same problem with my EZQuest 120GB HD that I have been using for many years. I sent all folders/files to trash before trying Time Machine which failed to see this disk. In disk utility, it checks ok (repair permissions and repair disk) but it fails to recognize the disk for partition.
Any suggestions? The "Get info" results are pasted below.
David
Name : Indigita
Type : Disk
Partition Map Scheme : Unformatted
Disk Identifier : disk1
Media Name : Indigita Generic 1394 dev Media
Media Type : Generic
Connection Bus : FireWire
Connection ID : 13753799005283824
Device Tree : /PCI0/RP04@1C,3/FRWR@0/node@30dd01e005a5f0/sbp-2@c000/@0:0
Universal Unique Identifier : E2117719-B767-3D51-8FCC-5D78AAAFA5F2
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 111.8 GB (120,034,123,776 Bytes)
Free Space : 89.9 GB (96,504,556,544 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0

Verify Disk failed for Time Machine backup disk

Thread <http://discussions.apple.com/thread.jspa?messageID=7930301&#7930301> discussed a similar issue, but it was closed without an answer so I'm opening a new one.
After a power failure I ran Disk Utility to Repair Permissions on my boot disk and Verify Disk on another that I use to store media files; neither had significant problems. Then I ran Verify Disk (verify, not repair; and disk, not permissions) on my Time Machine backup disk. It started spitting out the errors shown below. The time remaining counted up to 16 minutes, but wasn't coming down very fast so I left it running overnight. My machine is set to not sleep or spin down the disks. The next evening it was down to 12 minutes left, and was still spitting out the same errors. The second evening it was done, having failed out as shown in this log file excerpt:
2009-06-20 22:25:48 -0400: Verifying volume “Backup”
Starting verification tool: 2009-06-20 22:25:48 -0400
2009-06-20 22:25:50 -0400: Checking Journaled HFS Plus volume.
2009-06-20 22:25:50 -0400: Checking Extents Overflow file.
2009-06-20 22:25:50 -0400: Checking Catalog file.
2009-06-20 22:35:21 -0400: Checking multi-linked files.
2009-06-20 23:08:17 -0400: Checking Catalog hierarchy.
2009-06-20 23:16:59 -0400: Checking Extended Attributes file.
2009-06-20 23:18:34 -0400: Checking multi-linked directories.
2009-06-20 23:31:05 -0400: 2009-06-20 23:31:05 -0400: Incorrect owner flags for directory hard link (id = 3763501)
2009-06-20 23:31:05 -0400: 2009-06-20 23:31:05 -0400: 2009-06-20 23:31:05 -0400: (It should be 0x2 instead of 0x0)
2009-06-22 15:14:54 -0400: 2009-06-22 15:14:57 -0400: Incorrect owner flags for directory hard link (id = 7746623)
2009-06-22 15:14:59 -0400: 2009-06-22 15:15:00 -0400: 2009-06-22 15:15:02 -0400: (It should be 0x2 instead of 0x0)
2009-06-22 15:20:35 -0400: Checking volume bitmap.
2009-06-22 15:20:37 -0400: Checking volume information.
2009-06-22 15:20:39 -0400: 2009-06-22 15:20:41 -0400: The volume Backup needs to be repaired.
2009-06-22 15:20:43 -0400: Error: Filesystem verify or repair failed.2009-06-22 15:20:44 -0400:
2009-06-22 15:20:44 -0400: Disk Utility stopped verifying “Backup” because the following error was encountered:
Filesystem verify or repair failed.
At that point the whole system was extremely sluggish, and the access light on the backup disk was flashing steadily. The pmTool process seemed to be running away, but the system wasn't responsive enough for me to do much about it, so I held down the power button to shutdown. Upon the 2nd restart the system booted and seems to be OK, but I'm leery of running another Verify Disk.
What's going on? Are those errors anything to worry about? Is it possible to run Verify Disk on a Time Machine backup disk? What about Repair Disk?

John Seal wrote:
2009-06-22 15:20:43 -0400: Error: Filesystem verify or repair failed.2009-06-22 15:20:44 -0400:
2009-06-22 15:20:44 -0400: Disk Utility stopped verifying “Backup” because the following error was encountered:
Filesystem verify or repair failed.
At that point the whole system was extremely sluggish, and the access light on the backup disk was flashing steadily. The pmTool process seemed to be running away, but the system wasn't responsive enough for me to do much about it, so I held down the power button to shutdown.
Any time Disk Utility says you need to repair a disk, you need to repair it. Period.
So run it. If it fails to repair everything, run it again (and again) until it either repairs everything or can't repair any more. If it can't repair it, post back and we'll discuss options.
There's no point in running +Verify Disk+ on an external drive; just run +Repair Disk.+ The only time +Verify Disk+ is needed is for your internal HD (because you can't repair the disk you're running from).
And you need to do that again because of the forced power-down. Any time there's an abnormal shutdown, it's possible the file system on your internal HD can be damaged. Usually it isn't, but it's possible. If that says you need to repair it, you'll have to boot from your Leopard Install disc and use it's copy of DU. Post back if you need to do this but don't know how.

New larger disk drive for Time Machine ..having trouble using it.

I must be missing something simple here. My Time Machine drive was getting pretty full so I went out and bought a larger drive. I assumed I could copy everything on the old drive to the new one ..then start up Time Machine and point it to the new drive and be in business. Not so. When I tried to copy the contents from one disk to the other the process locked up after about an hour. All activity stopped and I had no files on the new drive. To troubleshoot I simply copied a small folder from the smaller Time Machine drive to the new one..and it copied fine. However I noticed the date on the copied file was current so I assume my process is not a good one anyway as all the dates will be lost. Guess that will screw up Time Machine (after all what is time if its all the same ?). So ..how do I use a new larger drive for Time Machine..without loosing all the old stuff that is already saved. If I just select change disk from the Time Machine panel I assume I will only get backups from now ...and nothing older (from the old disk). I do not want to keep the older disk connected. So what am I missing here ??

Pondini wrote:
And I forgot to add: Disk Utility will do it.
I missed your post this morning.
I looked around and found the keys to get Disk Utility to do it. No $$ needed.
Thanks for the info.
For the rest of the viewers:
*How to change the Time Machine backup disk and migrate the current data to the new disk*:
This procedure performs block transfers, not file-by-file transfers. It avoids all the extended attribute, ACL and hierarchical problems. It just works - it's a Mac!
System Preferences:
..1 - Time Machine:
....1.1 - Turn OFF
..2 - Spotlight:
....2.1 - Privacy:
......2.1.1 add current TimeMachine volume to prevention list
......2.1.2 add new TimeMachine volume to prevention list
Disk Utility:
..1 - Select the target drive in the left pane
..2 - Select Partition tab
....2.1 - Volume Scheme: *1 Partition*
....2.2 - Options: *GUID Partition Table*
....2.3 - Select Apply -> Partition
..3 - Select Restore tab
....3.1 - Drag source Volume into Source window
....3.2 - drag destination Volume into Destination window
....3.3 - Check box: *Erase Destination* ( +this is the critical step+ )
....3.4 - Click Restore button (Wait for transfer to complete, minutes to hours depending on size & disk connections)
The source and destination volumes will now have the same name. Change the volume name(s) as desired.
System Preferences:
..1 - Spotlight:
....1.1 - Privacy: add new TimeMachine volume to prevention list
..1 - Time Machine:
....1.1 - Turn ON
Done!

Extend disk space for Time machine?

Hi,
We can now use 2 disk drives at one location to keep our backup files with Time Machine, thanks to Mountain Lion
Behavior is that both disks will end-up with the same backed-up files.
Is it possible to make it such that the 2 disks complement each other so that a file is back up on one disk only? The outcome being that MacOS sees the 2 disks more as a single but LARGER disk for Time Machine.
The problem I am trying to solve is that my Time-Capsule is starting to be too small for my needs and I would like to extend the storage capacity through a 2nd drive connected directly to my Mac.
Thanks

There are ways you can continue using the TC by just adding a larger external drive to it. See:
My Time Capsule is too small to back-up my Mac(s). Now what?
Note that third-party NAS drives won't work reliably with Time Machine, and neither will a hard drive connected to a wireless router (even an Apple AirPort base station). As long as you've already got the TC, you might as well continue using it in conjunction with a larger drive or hardware RAID setup.

Anyone find a way to use an airport disk for Time Machine?

Apple says it is not possible ( http://docs.info.apple.com/article.html?artnum=306833 ). Yet I have seen some posts of people who claim they are doing it. How?

Here's the workaround that has been posted ...
(NOTE: Caution!!! There is a reason Apple did not include Air Disk support for Time Machine in the current release of Leopard. I would strongly discourage implementing any workarounds, especially if the data you are backing up is critical to you. However, if you're just curious to see if it is possible, then proceed with caution.)
Here's a workaround for the Airport disk problem that may or may not work for you:
1) disconnect airport disk and plug into computer as a USB drive directly.
2) Set up time machine to use this volume.
3) In terminal cd to volume "cd /Volume/HDD"
4) In terminal "touch .com.apple.timemachine.supported" this will create an invisible file.
5) In terminal "sudo chown root:admin .com.apple.timemachine.supported"
6) In terminal "sudo chmod 1775 .com.apple.timemachine.supported"
7) In terminal "ls -l -a" the .com.apple.timemachine.supported file should be -rwxrwxr-t
8) eject disk, unplug from mac, plug into Airport.
9) mount at mac using connect to server in finder (command k) and afp://airportname.local./HDname
10) see if time machine now sees the drive and tries to use it.
As reported at Macrumors (http://forums.macrumors.com/showpost.php?p=4387985&postcount=50)

Can i use time capsule for external h drive and also for time machine?

Can i use time capsule for external h drive and also for time machine?

Hello, vascocaco.
If I understand correctly, you're wondering if you can use your Time Capsule's internal hard disk both for Time Machine backups and as an ordinary drive. Is this your question?
You can, but Time Machine backups may take longer.
To do it, you should partition your Time Capsule's hard disk to create one volume for the backups and one for other files.

Can two macs use same disk for Time Machine backup with Airport Extreme?

Hi
I use a Western Digital disk as a wireless Time Machine backup connected to the USB port on my Airport Extreme and it works great. My question is: can my girlfriend use that same disk for Time Machine backup from HER computer too? (I don't mind formatting the disk if needed.)
If she can't, is it then possible to connect a USB hub and have two disks hooked up to the Airport Extreme?
Thanks for helping. I am constantly in awe of all the help people like you give people like me. Thanks!!!
Jakob

I've gone through the manual setup and the assisted setup and can't seem to get my MacBook to use the Time Machine. Any thoughts or help would be greatly appreciated.
Well, as the Jolly Giant points out....+this type of configuration is not supported by Apple+, so it's difficult, if not impossible, to provide a fix for something that Apple says that you cannot do. Reference these Apple Support documents regarding this topic:
http://support.apple.com/kb/HT2038
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
Your situation is not unlike other users who try this and find that one computer may backup...(usually for a limited time before corruption issues start to creep in)...but another computer cannot backup. Count me as one of those users who thought that because things seemed to work that I had somehow "beat the system".
I started getting the corruption error messages after 4-5 weeks of successful backups, so I figured that it did not make sense to continue to try to get a second computer to backup (yes, I too could not setup a second Mac to backup).
Sorry, I could not get a second machine to backup, so can't tell you how to accomplish that goal. If you want to continue to try backing up this way, you might want to also think about a second backup strategy...just in case backups become corrupted on the WD drive.
Maybe if Apple says you cannot do this, they just may be right?
Message was edited by: Bob Timmons

Setting up a shared disk for Time Machine

Folks,
I have a 24" Al iMac with an external 750GB disk allocated to time machine.
This machine has a single account with administrative privileges "me".
I have a second 20" snow iMac that I would like to backup to the same disk.
It has 4 accounts, one of which has administrative privileges (also called "me").
How do I need to configure sharing on the Al iMac to allow time machine on the snow iMac to see the drive on the Al iMac, and be able to backup/restore to this volume?
I have searched the forums here but cannot seem to find this information.
Thanks in advance.
- ljm

Turn on Filesharing in the "Sharing" preference pane on both computers (You might want to specify which users have access via filesharing). Then on the snow imac connect to your Aluminum imac and mount the external drive so you can access it. Go to the TM settings and select the Aluminum imac's drive that's now shared and mounted, and start the initial backup. It will create a "sparsebundle" disk image on the backup drive and use that for the snow imac's backup. Everytime it writes to the image, it will mount it over the network and do a backup, and then eject it. Sometimes it wont back up to the image if you're not connected to the Aluminum mac, so to solve this, select the mounted shared drive as a "login item" in the snow imac's user preferences (for each user). This will create the connection on login, and backups should proceed accordingly.
Message was edited by: Topher Kessler

Cannot install Mountain Lion on my hard disc, as I keep getting the message" 'This disk is used for Time Machine backups'. Which it isn't - I don't use Time Machine

Cannot install Mountain Lion on my hard disc, as I keep getting the message" 'This disk is used for Time Machine backups'. Which it isn't - I don't use Time Machine

Check to see if you have a folder named "Backups.backupdb" at the root level of your hard disk. That can cause this error message.

I am setting up a time machine backup to a external Hard drive. I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days. I've decided that I want to turn encryption off and partition the disk. So I do I start over?

With the external drive attached, open Finder>Applications>Utilities>Disk Utility. Select the external drive from the list in the left side panel of the DU window. In the main window panel, click Partition in the buttons top center of that panel.
Select the number of partitions you want and adjust their sizes.
For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults]. Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup.
Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

Use a DMG for Time Machine Disk?

Hello everyone,
After extensive googling, it seems at first that Time Machine will not allow you to use a mounted disk image for a backup drive. I was wondering if there was a way to rig it up so that it would work, somehow disguising the mounted image as a hard drive.
My situation is as follows: I have an external FireLite Smartdisk hard drive for Time Machine backups. And yet, the drive is plenty big, while my computer's hard drive is fairly small. I want to have the backups not take up the whole drive, as they have. I attempted to partition the drive via Disk Utility, but it gave me the following error:
Partition failed with the error:
Filesystem resize support required, such as HFS+ with Journaling enabled.
I tried it with all file systems, including free space. I finally decided to try a sparse bundle disk image, with a size of 100 gb. I mounted it, went into Time Machine prefs, and it did not appear on the list of available disks.
Does anyone have any ideas?

I'd quit trying to outsmart the backup system (Time Machine is picky already) and focus on the hardware. I don't have one of those drives, but I'd be looking at why you can't repartition or format the drive. Firmware? Using a hub? Does it have a USB port you can try?
Many hard drives like the MyBook series have had problems with FW on Leopard and there are firmware updates for them. The USB ports worked fine.

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I need to free up room on my computer. As of now, I can't even load updates. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please!

I agree with Kappy.. passing files and especially via wireless is slow as slow.
Just need to be sure your TC is the new AC model??
And the OS on the computer is Lion?
Have you completed the setup of the TC via the utility? You do still need to get internet via the TC so it has to be plugged into the main router..
Give us the full picture of the network.
Then we can help you get into it.. whether you should put your files on it is another question.

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2

Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet

Video editing causing enormous disk usage for Time Machine

Similar Messages

Maybe you are looking for