Video Editing: Speed up selection of a video, how?

Hello All,So I need to take a long video file, speed up the boring bits in the middle and slow it back down when the interesting bit happens, I know that sounded dodgy. So how do I do this? I have never done anything like this before so software recommendations and reading material would be greatly appreciated./back storyI have a iPhone 5s that will go to sleep mode and if you leave it alone for some time, it will refuse to wake up unless you press Home & Power at the same time and hold for a few seconds. I have tried returning it to provider and Apple and they both say that nothing is wrong with the phone. Now I have a ~40 minute video where you can see the screen goes off and 40 minutes in me trying to wake the damn thing up. I need to speed that middle bit up.../end backs tory*edit*For interests sake I have tried a factory reset but...
This topic first appeared in the Spiceworks Community

if you still have that 'bricked' 5550 printer, or one hung because of RFU update failures, try this:
I had the same issue after a power outage, (thunderstorm went through area causing power to drop off and on several times in short time frame, catching the printer in its 'restart' )firmware got damaged so printer refused to run. (basically a brick). I finally found a solution. ( I am running windows 7 ultimate x64)
I found and downloaded a firmware image, then used HDDRAWCOPY
(hddrawcopy makes an exact copy of the source file.)
to copy the firmware to my CF card, (you have to pull the formatter and pull the CF card).
I used a USB card reader to format my CF card and then ran HDDRAWCOPY to write the downloaded firmware to it.
reinstalled the CF card and then put formatter board back in my 5550dtn, it started right up, and is now running...

Similar Messages

How can I slow down the playback speed of selected parts of a captivate video?

Hi everybody,
I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
Thanks!

Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
Much appreciated.
Paul

I'm planning on making my own Podcast channel for my world of warcraft videos, how to I get started?

I'm planning on making my own Podcast channel for my world of warcraft videos, how to I get started? I'm using my MacBook, Mac OS X (10.6) for my video editing and using my HP Pavilion, Windows 7, g6t-2000 Notebook PC 64-bit for my video recording.

You may find my 'get you started' page on podcasting helpful.
http://rfwilmut.net/pc
It's written with audio podcasts in mind but will explain the general principles for you - ths concept of a 'feed' is the same for audio and video.
You should also check this Apple Tech note for information about formatting video
http://www.apple.com/itunes/podcasts/specs.html#formattingvideo

Customize countdown in Print to Video--How to??

Customize countdown in Print to Video--How to??
FCP 4.5HD.
Ted.

If you didn't use black after the couple of frames of the "2," what would you put between there and the starty of program?
You CAN change the black if you want... but there's a reason for :02 of black:
It's expected and necessary in live television.
Black is necessary on the tape in order to be able to go from "black to black" as when going into a commercial break.
------- stop here if you don't want the background on why---
The tape is cued to a specific number of seconds ahead of sound and then rolled when the director calls a "roll tape" or "Roll VTR _" cue. The countdown rolls by in the monitor, and the director and technical director can see when picture's up, then take the video.
There's usually a fade to black out of program and then eithe a cut or fade to the next video/audio source.
A similar process happens at the end of the commercial. At a specific number of seconds before the end of commercial #1, commercial #2 is rolled... then taken... and so forth if things are coming off of separate tape machines.
Black at the head and tail of spots lets a simple routing switcher make the change from playback device to playback device.
In the "olden days" before automated tape playback machines, commercials were either on film reels (edited together into clusters with a countdown at the beginning and black leader on the tail,) on a videotape that was edited together in a similar fashion... or... (sometimes dangerously so) rolled from four or five different tape machines "live" on the air.
If things were rolled "live," one right after another, I'm sure that there were a lot of praying break operators in stations where equipment was old, maintainence was lax and Murphy was a regular visitor.
The countdown and black on each commercial was a necessary timing tool in order to get through the break cleanly. I can tell you from experience that NOT having them made life verrry dicey when it came to getting in and out of program elements cleanly.
The RCA TCR 100 Cart machine and the Ampex model that did the same thing) would play all the elements in a break and do the switching in between... simplifying the process... until there was a breakdown of the machine, and then you should have seen the scramble in Master Control and/or the tape room.
Its a lot different these days if the station or network airing the commercials plays spots (commercials) off a file server... it's a different game entirely.
Everything is automated and "trimmed" when it's transferred (or start and finish marked on the file).
In that case. the countdown is not needed to get the commercial on the air... but is included to ensure that there's a reference for where the spot actually begins. The :02 of black is still included, since stations traditionally fade or cut to black between spots.
The countdown itself was designed to allow theater projectionists make smooth changes from reel to reel as a movie was projected on the screen.
The projectionist would thread the film on the incoming projector so that the first "10" was in the gate.
As the outgoing reel ended... little cue dots in the upper right hand corner of the screen "cued" the projectionist when to roll the upcoming reel... and then a specific number of seconds laterten in our examplea second set of cue dots (four frames worth) on the screen would cue him to hit the changeover button, opening a douser on the incoming projector and closing one on the outgoing projector... and swapping audio sources at the same time.
The countdown performs a similar function in live television: The tape is cued to a specific number of seconds ahead of sound and then rolled when the director calls a "roll tape" or "Roll VTR _" cue. The countdown rolls by in the monitor, and the director and technical director can see when picture's up, then take the video.
You'd think that woould be the case for movie packages and syndicated television shows, right?

When capturing video; how do I get rid of the green lines at the bottom of the frame?

When capturing video; How do I get rid of the green lines at the bottom of the frame?

s.haider
You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
And, the general drill for all users of Premiere Elements 8.0
a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
b. Are you working from the 8.0.1 Update version of the program?
Please consider.
We will be watching for the outcome.
Thank you.
ATR

My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I have synced my phone it has taken all my purchases photos and videos how do i get them back

i have synced my phone it has wiped all my purchases photos and videos how do i get them back

Did you sync to a different computer than the one you had previously synced to? If so you need to sync to the original computer. Otherwise you can just restore the last backup you made on the previous sync.

HT2499 I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???

I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???

what application are you using to watch the DVD?
is it a burned dvd?

I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments", it opens Photoshop CC (2014) but my photo doesn't s

I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments", it opens Photoshop CC (2014) but my photo doesn't show up? My photo does show up when I click on "edit copy" or "edit original".
How can I correct that so that I can open up a photo from Lightroom WITH the Lightroom adjustments? Thanks!

I'm having a similar problem, but only with jpg's. I have PS CS6, CC, and CC 2014. Other image file formats function normally with regard to the "open with" list. PS CC 2014 appears on the list. But with jpg's only PS CC appears on the "open with" list and 2014 can't be added by the browsing for it.
The curious thing is that if I have any of the three versions of Photoshop open, click on Photoshop CC in the "open with" list, the image opens in whatever version is already open on my computer. This is true of all image formats. No matter which version I pick from the "open with" list it opens in the currently running program. I use only the latest version so keeping it open all the time is an easy work around. I won't uninstall any of the earlier versions lest more file association quirks result. it would be nice to have this matter fixed.

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
Might try this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

When I changed to IOS 6 the name of the vidieos in the video app disapeared, now i onl have the bitmaps of the videos how ca I get back the titles?

When I changed to IOS 6 the name of the vidieos in the video app on my iPAD 2 disapeared, now i onlly have the bitmaps of the videos how can I get back the titles?

I can still access my favorites in the mobile site using Safari. Go here and sign in.
http://m.youtube.com/
Tap on the rectangles at the top on the right side - across from the YouTube logo and then tap
The Favorites icon - the heart icon.

HT1338 Im trying to watch a film downloaded from Bit Lord, I'm getting 'Error Dolby AC3 Audio". Player does not recognize the audio in this video, how do I fix this?

Im trying to watch a film downloaded from Bit Lord, I'm getting 'Error Dolby AC3 Audio". Player does not recognize the audio in this video, how do I fix this?

Download VLC and try playing the video...
http://www.videolan.org

HT4236 I lost my iPod touch 32 GB a month ago, and today I got a new iPod touch 64 GB. While syncing it with itunes, I got my music library, books and purchased items back, but I didn't get my photos and videos.How can I get my old photos back in my new i

I lost my iPod touch 32 GB a month ago, and today I got a new iPod touch 64 GB. While syncing it with itunes, I got my music library, books and purchased items back, but I didn't get my photos and videos.How can I get my old photos back in my new iPod?

Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books.

Database DLL error on editing the record selection formula?

Post Author: Aravind
CA Forum: Older Products
Hi All,I recently edited the record selection formula of an old report and since then the report is issuing me an "Error detected by database DLL" error.The report was running fine earlier and still continues to run fine if I undo the changes. Earlier, the records were selected based on a 'date' field and I edited the formula to select records based on another date field, but the report doesn't work.The report runs fine on my local PC using Crystal Reports, but web based reporting fails with the error message. The data is selected from a view and the date parameters I talked about are the fields in the same view.This view has around five date parameters and the report runs fine for all of them, except one date field.Any pointers are appreciated.Crystal reports version is 8.5. Regards,Aravind.

Post Author: DPowell
CA Forum: Older Products
Ah, yes, the good old generic date error.
The problem is likely an invalid date value in one (or all) of your records with that field. You don't say what database engine you are connected to or which driver you are using for the report, but I'll give you some "pointers".
Basically, the SQL fetch has encountered an error in your date field and the driver you are using in the report can't handle it.
A null date could cause that problem. Also a date-time field with an invalid value or truncated time value. A robust ODBC driver, like one of the Microsoft drivers might be able to overcome it. Likewise, vendors frequently release updated drivers to improve error handling just like this.
1. Analyze your data, specifically the contents of the "new" date field you are using for some kind of invalid date.
2. Experiment with different ODBC drivers by creating alternate ODBC connections to the same database using different ODBC drivers.
3. Browse and experiment with options in Crystal Reports Properties that allow you to specify data conversions for NULLs and Dates.
Good luck !

Video Editing: Speed up selection of a video, how?

Similar Messages

Maybe you are looking for