Video Encode Failure

I have a dual layer dvd project, with 7 video tracks. When I encode the video, the video ends up showing just a green screen, and I just hear the audio. I desperately need help getting this project going.
The encoder setting was 1 pass VBR between 3.3 and 6.0, I had to set it kind of low to fit all the video.
Any help would be appreciated.
Message was edited by: Ben Windsor

I did export the files from FCP as a QT, once the files encode they play as green, both in the DVD and in QT.
I'm not sure but I think I found a fix, I changed the encoder to CBR and I also built the dvd to hd first then burned the DVD. I at least got it to work. It's not ideal, but it was a time sensitive project. Thanks for the ideas, I may have to use compressor for my next project.

Similar Messages

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

Hi
Uninstall the Adobe Application manager from your computer.
and download the latest version of the AAM from the below mentioned sites.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
Once installed , Then try to update the application by launching the application and Help--> Update
Hope It Helps
Thanks

Flash Video Encoder Quit Unexpectedly

I have an Intel iMac and when I first loaded my Adobe Suite
everything worked fine, but then the Flash Video Encoder stopped
working with "Flash Video Encoder Stopped Unexpectedly" and I
cannot get it to work again. I deleted the files and reloaded the
program from the original DVD and that did not work.
When I was setting up a new user on my iMac, I tried running
the Flash Video Encoder in the other user and it ran fine, but when
I returned to the main user, it would not start and gave the same
error. I'm relatively new to Macs - a bit more than a year - so I
suspect it is some setting or preference or something that I have
wrong.
Any suggestions would be most appreciated. Thanks.
-Brian-

I am getting the exact same error on my windows vista x64.
I've also tried uninstalling and reinstalling quite a number of
times with no luck. I don't believe it is anything done wrong but
has to be some kind of bug in the installation somewhere.
Also any help would be appreciated.
Mike

Possible video card failure?

Screenshot:
http://users.vianet.ca/dtrudel/example1.jpg
I've started having problems with playing 3D video games, like the system totally freezing up and I'd have to reboot, or I'd get weird graphic things happening like in the picture above. At first, this just happened when playing games, but now it just happened when I was using safari. The pixels and weird lines don't go away until I reboot. Also, my system has completely locked up on me a few times over the last couple of days...when I wasn't playing any games...I was just checking my mail, or accessing a drop-down menu from the menu bar. When it freezes, I can't force quit...the system is totally unresponsive and I have to use the power button.
I've gone through most of the standard troubleshooting steps:
Verified and Repaired Permissions
Ran TechTool Deluxe
Ran the Apple Hardware Test
Ran OnyX
Deleted Preferences
I also created a new user for testing as advised by an Apple Care Rep and did a Clean Install of OS X
The tests (TechTool Deluxe and Apple Hardware Test) indicate that everything is supposedly fine.
When my system crashes, I often see this line (or something similar) in the logs:
Nov 24 20:57:59 localhost kernel: ATIRadeon::submit_buffer: Overflowed block waiting for FIFO space. Have 5, need 6. RBBM_STATUS 0x8009c111. VAPCNTLSTATUS 0x00000002
Has anyone had this experience, and can anyone confirm if this is indicative of a video card failure? My understanding is that the video card on the eMac is part of the logic board. The Apple Rep said the last thing I can try before taking it to a service center would be to erase everything and reformat. I really don't want to do that unless there is really some reason to believe that it might actually solve the problem. I mean, I'd have to spend several hours reinstalling everything, etc.
emac Mac OS X (10.3.9) 1.25 GHZ, 512 RAM, ATI Radeon 9200

the video card was bad, needed to have the logic board replaced

Live Video encoder for Mac. Does it exist?

Looking to d a live video stream. Would like to use Vp6 I do not think Adobe had a Flash video encoder for the mac.
As always, thanks for your time and help.
Mike

There is no Airscan :-)
but you can scan wirelessly on any your OS compatible network scanner of MFP printer with a scanner.
This has to be connected to your network either via WiFi or Eth cable.

Firefox will not play WebM video encoded by Sorenson Squeeze Pro 8

A short video encoded to WebM using Sorenson Squeeze Pro 8.0.48. Chrome and Opera play the HTML5 webm video with a problem. Firefox 10.0.1 and 11 just display a dimmed window with and "X" in the middle and will not load or play anything. Sorenson is a commercially proven product as confirmed by Chrome and Opera, so what gives with Firefox?

We have just completed our webm testing with Telestream's Episode Pro 6.2.1.1 and not surprisingly, the same results as Sorenson Squeeze Pro 8.
Chrome, Opera and Safari browsers play HTML5 webm video as expected.
Firefox rigidly enforces the server .htaccess configuration to specifically state Mime Types, then it will/does work.

Accessing Flash Video Encoder Programmatically

At the moment I am working on a batch program that will take
video files, and /encode them into FLVs. I would like to do this in
a programmatic (command line way), so that I can can embed this
into a nightly batch process.
Can the Flash Video Encoder support this need?

As far as I know about FFMPEG, it does not encode using on2
vp6, which is the superior codec for flv. I too am looking for a
programmatic way of transcoding to flash using the on2 vp6 codec.
on2 has the Flix Engine SDK, which is quite expensive, but it
allows you to programmatically transcode using vp6.
If there is another product out there that can do this (at a
non-expensive cost) I would love to hear about it.

Flash Video Encoder

Hi,
i hope someone can help me.
When i make flv file in Video Encoder (3 min) i see the
process i the window.
But when i open Flash and Browse the flv file it stop after 1
min.
I have make this before but now it´s problems.
Whats wrong?
Bets Regards
L G Blom

If you want to batch encode FLV files on a server (not
necessarily via a web UI), I'd recommend Sorenson Squeeze. You can
create batch jobs with watch folders. It works nicely. I believe
you can do the same thing with On2 Flix Pro too. You'll get better
quality out of these products as well.

Flash Video Encoder for WMV - DW8 vs CS5

Hi,
I'm trying to convert a WMV file into Flash. I know that this can be done using DW8's Flash Video Encoder ....but it seems this function is no longer availabe in CS5.
I would be grateful if someone confirm that this understanding is true.
Many thanks
KT

I think this is true. I'm using MacVide VideoFlash converter now. It has trial
http://www.macvide.com/Macvide_VideoFlash_Converter/ - good prog)

Flash Video Encoder Version Update

I have version 1.0 of the Flash Video Encoder. This came
bundled with Adobe Web Bundle (Macromedia Studio 8 - including
Flash Professional 8 and Adobe Creative Suite 2). I need version
1.2 or above in order to include metadata so my .flv files will
play in Captivate and on web pages. How can I get an upgrade of the
Encoder?

You are mistaken about that I think. There is a Flash Video
Exporter for MX 04 that can go up to version 1.2. The Flash Video
Encoder that comes with Flash Pro 8 only goes to 1.0.
http://www.adobe.com/support/documentation/en/flash/mx2004/readme/fmxpro2004_video.html
http://www.adobe.com/products/flash/flashpro/productinfo/encoder/
So, does Captivate say it needs V1.2 of the Exporter or the
Encoder? I don't have Flash MX04 so I don't know the
difference.

Interesting performance anomaly during video encode

I just noticed an interesting anomaly while my iDVD6 project was encoding video. I found that if I cover up the 'Creating Your DVD' progress bar and preview window with a Finder window, that video encoding seems to move a whole lot faster. I could tell by listening to the disk activity which seemed to be occurring about twice as fast. When I moved the Finder window away and exposed progress bar/preview window, then disk activity slowed down.
I opened Activity Monitor and looked at CPU% which showed about 70-80% with progress bar/preview window exposed. After covering up, the CPU% increased from 125-150% So apparently exposing progress bar/preview window slows things down quite a bit during video encode. I tried same trick during audio encode, and it made no difference. CPU% was about 7-8% during audio encode.
I was wondering if anyone in this discussion group noticed this performance anomaly previously.
Paul

Hi Paul
Yes I noted some relatively related phenomena during the rendering process
in FinalCutExpress that just selecting Finder seemed to speed things up.
Second: Please don't rely on the Activity monitor and most so when it says
iDVD doesn't answer. It's just rubisch. iDVD keeps on working - just wait and see.
Yours Bengt W

Jerkyness observed when live video encoded on FMLE

Hi All,
I am trying to encode live stream using FMLE 3.2 on mac mini.
Input is of 1.5mbps with 640x480. It is coming throgh canopus and firewire to mac mini.
I have set my bitrates to
1. 800kbps H264 main @3.1 resolution 640x480
2. 500kbps H264 main @3.1 resolution 480x360
3. 300kbps H264 main @3.1 resolution 320x240
My FMS parameters are, FMS URL:rtmp://localhost/live , streamname : livestream%i
The live video encodes fine when i have only 1 stream encoding. But jerkyness observed when i have 3 bitrates enabled on encoder. What could be the issue?
I thought i can use FMLE to adaptive streaming.
I will be using 3 different streams for pc and mobile. Please let me know if i have any issues on the encoder side
Any pointers would be useful.
Thanks.

For VP6 MBR:
640x480 size or below; 2 or 3 streams at 25 fps: Dual Core (Core 2 Duo 3GHz, 2GB RAM)
768x576 size; 3 streams at 25 fps: 8 Core (Xeon 3GHz, 3.25 GB RAM)
Input stream 640x480 @25 fps; 3 output streams: 76x144 @25 fps_150 kbps , 320x240 @25 fps_300 kbps and 640x480 @25 fps_700 kbps: Dual Core 3GHz, 2GB RAM
For H264 MBR:
320x240 size ( Main or base profile); 3 streams at 25 fps: Quad Core Xeon 2GHz, 4GB RAM.
640x480 size ( Main or base profile); 2 streams at 25 fps: 8 core Xeon 3GHz, 3.25 GB RAM.
768x576 size ( Main or base profile); 2 streams at 25 fps: 8 core Xeon 3GHz, 3.25 GB RAM.

How video encoder continunously

Hello everyone!
I have a ADSP BF533 EZ kit lite and labview embedded for blackfin 2.5 module. I would connect Analog video input(composite video) and capture video frame then display on the my car GPS navigation with A/V input by running Videoecho example.
I was successful to build this example and i can see video displaying on the navigation. But something i would know more:
1. the video displayed is not continunously. I can see when i reduce the time delay for display it can change displaying faster. but it alway dispeared a blank frame before starting new frame.
2. I am thinking that mean when Video Encoder actived, Video decoder was not actived? Am i right?. I want to display continunously the video. how i can do?
3. Could i add any image processing algorithm in catched frame buffer then redisplay on the display?.
Here is code for pepople viewing.
Thank you so much for attention and please post your idea if it is possible!
Do Van Lam!
Attachments:
VideoGlobal.vi ‏5 KB
VideoEcho.vi ‏55 KB
VideoCallback.vi ‏6 KB

Hello !
It is me again!
I would like to ask anybody that can i use BF_VideoEcoder(decoder)_enable(disable) for ADSP BF537 EZ kit lite. And can i config PPI0 for decoder and PPI1 for Encoder by using AV EZ extender board? beacause ADSP BF533 has only one PPI so that is might be the reason in my above post.
I have ever test with VideoEcho example for ADSP BF537 EZ kit lite by creating new project and config hardware for BF537 EZ kit lite and copy code to new VI and modify LED on/off control VIs for BF537. but te video out but dit not apeared.
Could anybody help me to solve this problem?
Thank you very much!

Flash video encoder slow

I'm trying to convert a 4.5 minute *.avi to *.flv and am
having some difficulty. Flash Video Encoder says I have about 15.5
hours remaining (am 0.5 hours into the process). That seems wholly
unreasonable given the fact that it took me all of maybe 5 minutes
to save it as an XviD-encoded *.avi with VirtualDub...
Any ideas as to how I can speed this up?

I'm having a similar problem - but my issue has to do with
why the time to encode on my Mac Pro is slower than on my
associate's Power Mac G5.
I'm using the Flash 8 Video Encoder to convert .mov files to
flv files on a group license. On my station I have the following:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 12 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
I've got 151 GB available on my system drive.
Presently, it is taking me approximately 2 hours 45 minutes
to convert a 6 minute 26 sec mov to a flv with custom settings of:
Max Date Rate: 300 kbps
Frame Rate: Same as Source
Audio Data Rate: 48 kbps (mono)
500 x 333 pixels.
HOWEVER, on an associate's computer he is able to convert
under the same specs, same files, etc. in 1 hour 40 minutes.
His computer specs are:
Power Mac G5
Processor Speed - 2.3 GHz
2-CPU's
L2 Cache - 1 mb per CPU
Memory - 16 GB
Bus Speed 1.15 GHz
My computer has much more powerful processor, so we're
confused why it's taking longer on my computer.
I also have a second internal drive but presently the
programs and source file are on my system HD. Someone suggested
that I should try to make sure that the Video Encoder has max RAM
allocated to it as well as having the scratch disk and cache set to
the second internal drive. I don't know how to do this or even if
it's possible but looking for advice and suggestions on how to
better optimize the Video Encoder and would appreciate any help
with this ASAP.
Thanks!

Video Encode Failure

Similar Messages

Maybe you are looking for