Video Encoder help
Hello, I'm trying to encode a perfectly good MPEG file but in
the Advanced Settings in the Flash Encoder my Video options are
grayed out. It is encoding the audio track. What would be causing
this? The movie I'm trying to encode plays fine in the windows
media player. My encoder seems okay because when I Add a .avi file
the Video encoding options are fine.
Please help.
-Kriszti
I found a way were Flash Video Encoder can recognize a
perfectly good MPEG. I downloaded TMPGEnc MPEG Editor v2 and used
it to Multiplex the MPEG (Video Input = MPEG file and Audio Input =
MPEG file) to another file, which basically rewrites the MPEG to
another MPEG file. My Flash Video Encoder suddenly recognizes the
new MPEG file. It looks exactly the same using Windows Media
Player. Original MPEG is slightly bigger than the new one.
I wish Flash Video Encoder would throw an exception or error
code as to what in the MPEG file it does not like instead of
processing the MPEG file and the .FLV being blank.
Hope this helps someone.
Similar Messages
-
Help me export DV VIDEO Encoder Type 2 with cs6
Dear !
I use AP CS6 edit my film. When i export my video 1minutes and 10 minutes then :
-export 1minutes
-Export 10minutes
Media Encoder CS6
After endoder done i use Ulead Videostudio 9 check file info
i see it different.
i want export my video have duration over 10minutes with compression DV Video Encoder-Type 2
Please help me.
Thank !I do believe PP will export to different types depending on the length of the export. I'm not aware of any way to change that type in PP itself. But there are third party tools which can do the job.
-
Flash CS3 Video Encoder CuePoint XML help
I have a properly formed CuePoint XML file I generate from an
AppleScript that takes QT Chapter Marks and writes a CuePoint XML
for them. However, the File Type and Creator Type of the generated
file is TEXT and ttxt respectively. Flash Video encoder just
ignores these files and will not even let me select them to import
CuePoints. Checking sample CuePoint files created by the Encoder
reveals that they have no Type or Creator set. In fact they show
the attribute for these to be missing. The Encoder app refuses to
open any file with a Type applied. This is beyond frustrating and
just down right silly from a development stand point. Why on earth
should it limit based on type in this day and age. Since there is
no sane way of stripping the File Type attribute there seems to be
no viable way of opening a sane, well formed Cue Point XML file
created elsewhere on a Mac.
Does anyone have a suggestion, or can you point me to where
to file a really lame bug report with Adobe.Thanks for your help!
It works perfect with so many formats, the only problem is
that I can not add ".wmv" files. Is there any way to do it?
Thanks again! -
I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'
Hi
Uninstall the Adobe Application manager from your computer.
and download the latest version of the AAM from the below mentioned sites.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
Once installed , Then try to update the application by launching the application and Help--> Update
Hope It Helps
Thanks -
Flash Video Encoder Quit Unexpectedly
I have an Intel iMac and when I first loaded my Adobe Suite
everything worked fine, but then the Flash Video Encoder stopped
working with "Flash Video Encoder Stopped Unexpectedly" and I
cannot get it to work again. I deleted the files and reloaded the
program from the original DVD and that did not work.
When I was setting up a new user on my iMac, I tried running
the Flash Video Encoder in the other user and it ran fine, but when
I returned to the main user, it would not start and gave the same
error. I'm relatively new to Macs - a bit more than a year - so I
suspect it is some setting or preference or something that I have
wrong.
Any suggestions would be most appreciated. Thanks.
-Brian-I am getting the exact same error on my windows vista x64.
I've also tried uninstalling and reinstalling quite a number of
times with no luck. I don't believe it is anything done wrong but
has to be some kind of bug in the installation somewhere.
Also any help would be appreciated.
Mike -
Live Video encoder for Mac. Does it exist?
Looking to d a live video stream. Would like to use Vp6 I do not think Adobe had a Flash video encoder for the mac.
As always, thanks for your time and help.
MikeThere is no Airscan :-)
but you can scan wirelessly on any your OS compatible network scanner of MFP printer with a scanner.
This has to be connected to your network either via WiFi or Eth cable. -
Hi,
i hope someone can help me.
When i make flv file in Video Encoder (3 min) i see the
process i the window.
But when i open Flash and Browse the flv file it stop after 1
min.
I have make this before but now it´s problems.
Whats wrong?
Bets Regards
L G BlomIf you want to batch encode FLV files on a server (not
necessarily via a web UI), I'd recommend Sorenson Squeeze. You can
create batch jobs with watch folders. It works nicely. I believe
you can do the same thing with On2 Flix Pro too. You'll get better
quality out of these products as well. -
How video encoder continunously
Hello everyone!
I have a ADSP BF533 EZ kit lite and labview embedded for blackfin 2.5 module. I would connect Analog video input(composite video) and capture video frame then display on the my car GPS navigation with A/V input by running Videoecho example.
I was successful to build this example and i can see video displaying on the navigation. But something i would know more:
1. the video displayed is not continunously. I can see when i reduce the time delay for display it can change displaying faster. but it alway dispeared a blank frame before starting new frame.
2. I am thinking that mean when Video Encoder actived, Video decoder was not actived? Am i right?. I want to display continunously the video. how i can do?
3. Could i add any image processing algorithm in catched frame buffer then redisplay on the display?.
Here is code for pepople viewing.
Thank you so much for attention and please post your idea if it is possible!
Do Van Lam!
Attachments:
VideoGlobal.vi 5 KB
VideoEcho.vi 55 KB
VideoCallback.vi 6 KBHello !
It is me again!
I would like to ask anybody that can i use BF_VideoEcoder(decoder)_enable(disable) for ADSP BF537 EZ kit lite. And can i config PPI0 for decoder and PPI1 for Encoder by using AV EZ extender board? beacause ADSP BF533 has only one PPI so that is might be the reason in my above post.
I have ever test with VideoEcho example for ADSP BF537 EZ kit lite by creating new project and config hardware for BF537 EZ kit lite and copy code to new VI and modify LED on/off control VIs for BF537. but te video out but dit not apeared.
Could anybody help me to solve this problem?
Thank you very much! -
I'm trying to convert a 4.5 minute *.avi to *.flv and am
having some difficulty. Flash Video Encoder says I have about 15.5
hours remaining (am 0.5 hours into the process). That seems wholly
unreasonable given the fact that it took me all of maybe 5 minutes
to save it as an XviD-encoded *.avi with VirtualDub...
Any ideas as to how I can speed this up?I'm having a similar problem - but my issue has to do with
why the time to encode on my Mac Pro is slower than on my
associate's Power Mac G5.
I'm using the Flash 8 Video Encoder to convert .mov files to
flv files on a group license. On my station I have the following:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 12 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
I've got 151 GB available on my system drive.
Presently, it is taking me approximately 2 hours 45 minutes
to convert a 6 minute 26 sec mov to a flv with custom settings of:
Max Date Rate: 300 kbps
Frame Rate: Same as Source
Audio Data Rate: 48 kbps (mono)
500 x 333 pixels.
HOWEVER, on an associate's computer he is able to convert
under the same specs, same files, etc. in 1 hour 40 minutes.
His computer specs are:
Power Mac G5
Processor Speed - 2.3 GHz
2-CPU's
L2 Cache - 1 mb per CPU
Memory - 16 GB
Bus Speed 1.15 GHz
My computer has much more powerful processor, so we're
confused why it's taking longer on my computer.
I also have a second internal drive but presently the
programs and source file are on my system HD. Someone suggested
that I should try to make sure that the Video Encoder has max RAM
allocated to it as well as having the scratch disk and cache set to
the second internal drive. I don't know how to do this or even if
it's possible but looking for advice and suggestions on how to
better optimize the Video Encoder and would appreciate any help
with this ASAP.
Thanks! -
Qmaster and Flash Video Encoder 8
Can I use Qmaster to set up a render farm to encode Quicktime movies to FLVs using Flash Video Encoder? If so, does anyone know where i can find the command lines samples to se up the Macs?
http://manuals.info.apple.com/en/AppleQmaster3_UserManual.pdf
Pages 18 and 29 should be helpful.
However, it might just be easier to encode to H.264. -
Flash Video Encoder conflict with Safari for Windows
I installed Safari for Windows (AMD/Windows XP) without the
options (no Bonjour) and found that it disabled Adobe Flash Video
Encoder (tries to reinstall, can't find msi, can't reinstall from
disk, 1 keeps asking for disk 1). Uninstalled Quicktime, didn't
help. Uninstalled Safari, rebooted, still can't get Flash Encoder
working.timtro;
Many (myself included)won't be installing safari/win until
the final
release, and I suspect Adobe won't test much until then
either, so it's
probably best to report this to apple as a possible bug with
their
beta. -Tom Unger -
I have Studio 8 and am trying to use Flash Video Encoder for
the first time to convert a wmv file to flash. When I add the video
and seek to start the queue, I get an error message which reads,
"The output file could not be written because you do not have
enough system privileges." I'm really green at this - can someone
help? Thanks so much.I used to get this issue when I was trying to pull info
directly from cd-rom. Copy information locally and then try to use
flash encoder..it should work. let me know
[email protected] -
Flash Video Encoder – execution fails
Hello all,
if i want to start the flash video encoder i get this error
message: "The licensing subsystem has failed catastrophically!". I
try a Reinstalling but also it does not work!
Can anyone help me?
Greets timoHey I got it mixed up..... This is Flash Media Encoder 2.
What I have is Flash Video Encoder CS3.
What additional features can I get with Flash Media Encoder
2? Can it still work together with my current CS3 suite? -
Hai.
I am developing a video chat application in flex. Can anbody
help me in the video encoding part?
I need the video to be encoded using ON2VP6 or H264 to get a
better quality. How it can be done live using flex?
Thanks,
VivekVijayanThe problem is, you need a clientside technique to encode the video-chat-stream with a useable codec, cause the client/user have to upload this video(chat)-stream to the server, mostly with a small user bandwidth.
Actually flash supports only this standard codec for encoding the user video input, wich requires a high bandwith and represents still a real bad quality.
Thats a bad fact for adobe, cause this should be natural for such an "media software/system".
Anyway, someone has a solution for encoding the clients webcam input with a common codec before streaming to the media-server? -
I have a project that is rather large in screen size
(900x675). It is a 3D rendering of a sports arena that I needed to
be this large for various reasons.
The user experience is this: The user can see only a quarter
of the arena at any given time. When they want to see a different
view they would click an arrow button and a small transition movie
would play.
Here is where my video question comes in. My video are ripped
in quicktime, are 900x675 in size and are only 45 frames long (just
over 1 second). I purchased Sorenson Squeeze thinking it would help
deliver the best video quality but its poor at best. Very
bitmapped.
I am developing this in Flash 9 so is the flash video
compression codecs better than Sorenson? Also any help or
suggestions to increase the quality of video is greatly
appreciated. I know the dimensions are a bit large but the duration
is very short so I don't my file size is going to be an issue,
correct?
Here is a sample of what I am trying to accomplish and the
current state of my video
Sample
Thanks for any help you can give me.I've seen on your screenshot that you are using the Spark
Codec, is that correct? If yes then the case is pretty clear, the
spark codec is really bad at such fine details.. When using the
Flash Video Encoder "delivered together with Flash CS3" you can
choose to use on2 VP6 Codec which gives you a better quality. If
you don't care much about compatiblity you can also encode your
movies as H.264 and use the new Flash CS3 Update to play them out,
only downside is that your user needs to have Flash Player 9.0.115
installed which has been released just a few weeks ago.
From my point of view use on2VP6 and H.264 compare them, and
use what fits best.
If you need help on how to plug the h.264 video to your
flvplayback component go check my blog for a short tutorial about
it.
PS: Which encoding settings have you used?
Maybe you are looking for
-
How to have two Firefox in the same machine?
I have Firefox installed from the repo (Namoroka), but I also want to have another version to use exclusively with Tor. Downloading it from Mozilla's official website and running the executable doesn't work because it opens Namoroka. How should it be
-
ABAP Cache Refresh: PIAPPLUSER gets locked
Hi, well we are a little desperate. Concerning ABAP-Cache resfresh we already read in forum and this guide on how to handle XI-Cache (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290) But the Ca
-
I am relatively new to flex charting and was wondering if there was a way to somehow make the curve lineseries draw from left to right. I am using an array collection as the data provider and obtaining the values from a text file. Any help would be g
-
Error message on login to XSAN MDC and clients
Hi, I installed a new XSAN system with SLServer,10.6.1 and XSAN 2.2 then updated XSAN to 2.2.1. The system works fine, the only thing whenever I login from client or server I have an error message popping for all FC attached LUNs, " the disk you inse
-
BAPI_ENTRYSHEET_CREATE Usage
Hi Friends, i am using this BAPI ( BAPI_ENTRYSHEET_CREATE) in my code and for a partcicular scenario return table is filled with the error message 'sum of percentages > 1000.0 < Exceeds 100%' I am unable to run the bapi due to auth issue for the same