Video extracted using DVD x DV won't export

I'm using DVD x DV (v. 1.34) to extract video from a DVD for use in an iMovie project (I have iMovie '08, 7.1.1). To extract I used the iMovie 6 Final Cut setting. The video looks good in iMovie and I edited it etc. but then when I exported the project the video portion was black. Is there any way to fix this?

turns out i used expert settings/animation and changing it to expert settings Apple intermediate codec seems to be working now--do i get credit for solving my own problem?

Similar Messages

Video menus using DVD Studio Pro

I want to use a video I created in Motion as my menu for my DVD. The video begins with animation then the play and chapters, etc labels fade in. And, when one of those labels are click on, the animation will continue to the next place in the video.
For example, video begins with animation then labels fade in (play, chapters, extras), then user clicks on 'chapters' and video transitions to new chapters menu.
I would also like one track to play continously throughout.
Any help?
Thank You

You can't get the audio to be continuous throughout the menu and the transitions because you will be moving to a different physical location on the disc, and there is no memory cache on a DVD that'll keep the audio playing as you do the move.
Tupically, you do the starting animation and button fades using a single piece of audio, and the exit transition is at the start of the track that the menu button takes you to. A short piece of footage that uses a still of the menu, and then fades into whatever the transition is, and then on to the first frame of the track (or to a black screen) is normal, however different people do this sort of thing in different ways.
There was a time when to achieve this you had to use a track as your menu, and add buttons over video. You could still do it this way, but DVDSP is now more sophisticated and you can achieve a lot more using the standard tools built in.

Installing PSE12 Continually crashes my DVD player during install. Cannot open or use DVD and it won't open. Finally got it installed, but program blinks continuely when trying to open program. It then opens after a long wait.

Sorry this is my first time in the Adobe forum. I pretty much asked everything in my title. The installation process took me several hours to finally get it loaded. Continually crashes my DVD player and I have to use a pin to open it to get to the disc. This is a new disc just purchased a few days ago. Read where this program has had its share of problems on the internet. After installing the program, it blinks continually for a long time before it ever opens. Rather annoying to say the least. Need this program to get me started in my work.
Will this program work even though it blinks for a long time when opening it? Seems to work, but since I am not that familiar with it, I really don't know just yet.
Thank you for your input.
CBB

You're right. It wasn't QuickTime itself. I solved all the problems myself.
The main reason why QuickTime files weren't working was because the newest audio driver from Creative released July 2007 (using their autoupdate) is apparently for Windows Vista (it has the name Vista in the update title). Why that update showed up on my Windows XP Pro system, I have no idea. So, I went to Creative's site and got the driver before the latest release, and all works well.
The Microsoft update (from June 2007, I noticed today, not July) is another issue. It's based around the file P17RunE.dll, which is something from Microsoft for the SoundBlaster. Not sure what it does, but I don't need it.
Sorry for wasting all your time on a non QuickTime issue, but thanks for the help.

(CS4) Copy and paste video/sound into another project, sound won't export

Hello Adobe community
I am working on a TV show for a community television network in Australia. I created the opening credits in a seperate project to the edited footage of the show, because my computer is struggling with the size of all the files. So I have two project files. Recently I copied and pasted the edited footage of the show into the project where I have the opening credits (by highlighting all the footage, right clicking and going to copy, then opening the Project with the credits sequence, right clicking and selecting paste). This seems to work. I can hear the sound and continue tweaking and editing. However, when I export the project, the sound from the footage I have copied into the project can't be heard. I can hear the sound from the credit sequence, but not the sound that has been copied into the project (although on the timeline of the project, I can hear the sound... This problem only presents itself after export).
I have tried doing the opposite... Copying and pasting the opening credit sequence into the project with the edited footage, and I get the same problem. It doesn't seem to matter which file type I export as. I have tried .AVI and .MPEG2, with the same results.
I am using Windows 7 64bit version, and Premiere CS4. I have a mixture of .MTS, .WAV and .MP3 audio files in the footage that I copy and paste across. None of them are exporting.
I have tried moving the copied and pasted audio files on to the same audio tracks as the sound already in the project, but this doesn't work either. The original sound will export, then when it gets to the copied and pasted sound nothing can be heard.
I have included some screen shots to illustrate the problem below. If you have any questions please let me know.
Thanks for your time! I have a looming deadline so your help is much appreciated.
-Robert

Thanks for your replies everyone. Sounds like cut and paste is not an option. Wow, I didn't realise how much trouble I'd be causing for myself by having different parts of the show in different projects.
I am reluctant to export the project then import it into another project, because I do not want to lose quality through compression as Ann suggests.I don't know what you mean, Ann, when you say "Dont think CS4 could import single sequence (forgot)."? Jim, I'm also unsure what you mean when you say "That's what UT is for"?
However, I went to File/Import/Import Entire Project, and imported the project this way. Then I dragged the little folder icon that appeared in the top left hand corner of the screen onto the timeline. However, when I did this, a few problems occured. Firstly, the original project had footage and audio on many different tracks, but when I imported the project nearly all of the video and audio was on to the one track. Secondly, instead of going for 10 minutes, the imported footage went for a few hours. Thirdly, the sound and images were all out of sync. I have included two images to illustrate this problem:
Above is the original project. As you can see, I have audio and video on many different tracks, and lots of cuts.
This is what the project looked like after I had imported it into another project. Nearly everything is on one track, the footage goes for a few hours now (instead of 10 minutes) and the video and sound are all out of sink.
Then I tried File/Import/Import Selected Sequence. The only sequence I had the option of importing was Sequence 1. I did this, then dragged the folder icon onto the timeline, and I had a similar problem to before. Everything on one track, footage out of sync and going for a few hours.
Is there a way to import a project and maintain all of the editing (the cuts, the multiple tracks, etc.) as they are in the original? I have spent many hours editing both the footage and the opening credits, so I really don't want to lose all this work when I import one into the other. The good thing about copy and paste is that it maintains all of the original cuts and editing. Shame it is so unreliable.
Thanks heaps for all your help!
-Linus

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit.

I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
Anthony

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac, editing in imovie and burning on idvd. The picture quality is awful. What can I do?????

I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac then editing in imovie and burning dvd-r using idvd. The picture quality is awful. What can I do??????

At what point is the video quality bad? Is it bad on capture? I would recommend using an s-video 1394 firewire converter instead. They capture the video at a higher bit rate. If you have a lot of 8mm tapes to capture, invest in a stand alone DVD recorder. They capture and compress in one shot. If you need to rip it back from the DVD into iMovie again, I would recommend using DVDxDV.

Can I Extract Video From A DVD I Made?

I made a DVD in DVD SP 4. I no longer have the source video, but I wanted to extract some of the video from this DVD to make it into a Quicktime. Is that tough to do?

is this resolved, Mike?
'Cos the one word answer to your question : "I no longer have the source video, but I wanted to extract some of the video from this DVD to make it into a Quicktime. Is that tough to do?
Is 'No'.
It's not tough to do .. - but there are questions : as you know, Quicktimes aren't Quicktimes ... - it's just a wrapper. What do you want to make ? what size/format/porpoise/delivery method?
Do you want/need to edit ?
etc.

IMovie '08 option to make the best quality video on a DVD using iDVD '08

Which iMovie '08 option will make the best quality video on a DVD using iDVD '08?
1. Share-Media Browser-Large-Publish
2. Share-Export Using Quicktime
3. Or can you use an unpublished iMove in iDVD?
(Of course I'll have to first get iDVD to open without crashing...)

Which iMovie '08 option will make the best quality video on a DVD using iDVD '08?
1. Share-Media Browser-Large-Publish
2. Share-Export Using Quicktime
3. Or can you use an unpublished iMove in iDVD?
As always, this depends on a number of factors which you failed to cover in your original question.
1) If you source files are SD, other than an increased loss of time in converting you gain nothing in scaling the files up in iMovie '08 only to scale them back down in iDVD. On the other hand, if your source files are HD, then you will likely see a marginal increase in quality which may or may not be worth the price of increased processing time. In this latter case, you are allowing the MPEG-2 compressor to get the most it can out of your file at the P- and B-frame level.
2) Export using QT allows you to customize your output with regard to both compression format and settings. For instance, you can use a codec with extremely high data rate (e.g., VGA dimensions with DV at 28.5-57.0 Mpbs, AIC at 18.0-22.0 Mbps, or even unlimited H.264/AAC at 16.0-20.0 Mbps). High video data rates generally translate to less lost quality during the re-compression process. Thus, if the intermediate file produced by iMovie '08 and passed on to iDVD retains more of its original quality, the MPEG-2 compressor can get more quality out of the final conversion as stated above.
3) Since no physical file actually exists until the project (simply a set of instructions detailing how the final file will be created) is published, there is nothing to be physically sent to iDVD. basically you must create a physical file from the project in order to do anything at all whether sending it to a gallery, iTunes, YouTube, iDVD, etc.

Can i burn hd video on a DVD-R using i-movie and i-DVD

can i burn hd video on a DVD-R using i-movie and i-DVD so that it will give an HD presentation when played on a DVD player?

No. iDVD produces standard definition video DVDs. All material is reduced to 640 x 480 resolution. You can query the iDVD forum for the workflow to get the optimal image quality in a video DVD.
OT

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv? The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
Any help is greatly appreciated.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Why won't apple tv play some youtube videos it used to play?

Why won't apple tv play some youtube videos it used to play?

Ah I see what you mean. Do these specs help:
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 525 MiB
Duration : 20mn 59s
Overall bit rate : 3 494 Kbps
Encoded date : UTC 2009-08-19 08:38:05
Tagged date : UTC 2009-08-19 08:38:35
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 20mn 59s
Bit rate mode : Variable
Bit rate : 3 333 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16/9
Frame rate mode : Variable
Frame rate : 23.976 fps
Minimum frame rate : 23.810 fps
Maximum frame rate : 24.390 fps
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.151
Stream size : 501 MiB (95%)
Writing library : x264 core 66 r1114 a933a3e
Encoding settings : cabac=1 / ref=5 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=umh / subme=7 / psy_rd=1.0:0.0 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chromaqpoffset=-2 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=2pass / bitrate=3333 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.10
Language : English
Encoded date : UTC 2009-08-19 08:38:03
Tagged date : UTC 2009-08-19 08:38:35
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : 40
Duration : 20mn 59s
Bit rate mode : Constant
Bit rate : 156 Kbps
Nominal bit rate : 160 Kbps
Channel(s) : 2 channels
Channel positions : L R
Sampling rate : 48.0 KHz
Resolution : 16 bits
Stream size : 23.4 MiB (4%)

My Mac will burn a DVD from iPhoto but the images and videos will not play on my DVD player. I am using DVD-R disks

My Mac will burn a DVD from iPhoto but the images and videos will not play on my DVD player. I am using DVD-R disks

Hi john, try Burn...
http://burn-osx.sourceforge.net/Pages/English/home.html

Can you create markers that pause video on a DVD using DVD studio Pro?

I basically want to put video into DVD Studio Pro and add chapter markers that will pause the video at specific times. Is there an easy way to do this in DVD Studio - I tried some things but it never seems to be consistant. Sometimes it will pause the DVD at the correct point and other times it will not. Whatever help anyone can give me would be greatly appreciated. I am not used to using DVD Studio, but have used the other pro apps for a long time. Thanks.

I tried that and found that it only worked some of the time - does anyone know if that is a common issue or if there is a special way to do this to make it work? Thanks for all the help.
-Jack Moore

DVD from PE9 won't play in computer let alone another DVD player

I produced a 7 minute video in HD. I can play it on my computer either as HD or at standard res from files produced via the "Computer:Export files..." on the Share menu. I need to produce a standard NTSC DVD and when I burn using the "Disc: Burn DVD..." I get a message that the burn has been completed successfully. Yet the DVD will not play on my computer if I reinsert in in the same drive I just used to burn it, and won't play in a regular DVD player either. The computer doesn't even see the disc if I search for it. I've read a lot of stuff about DVD-Rs and booktypes and bitsetting but this doesn't seem to apply here since the computer can't read its own disc. Burning a copy of the files burned to folders doesn't work either. The DVD burner burns everything else just fine. I am using DVD+Rs. Would it make any difference if I used DVD-Rs? Or is there anything else anyone can suggest? I am using Windows 7 Professional. Thanks.

>burning to a folder
If you are able to write (not burn) the folder structure to your hard drive, you may use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc
Put a commercial DVD in your drive and take a look with Windows Explorer to see the folder structure and the types of files... and make sure what you write to a folder from PE is similar

Video extracted using DVD x DV won't export

Similar Messages

Maybe you are looking for