Video feeds on trunked port

Here's my current setup:
Cisco 4948 switch connected to a Linksys SRW2008 switch to a AmiNET125 and laptops.
Basically, here's what I'm trying to accomplish... on my Cisco switch I have 3 VLANs: 10, 20, and 100. 10 is my Management/Data VLAN, 20 runs my video, and 100 is my external network. Previously I did not have my port trunked from the Cisco to Linksys switches. The ports on both the Cisco and Linksys were setup as as a VLAN access port to VLAN 10. I was also able to view my video feeds that were running on VLAN 20 on my AmiNET125 with this configuration. The multicast IP was 224.1.1.100 and I had no problems accessing it on the AmiNET or on the laptops connected to the Linksys.
Now we are trunking the port from the Cisco switch to the Linksys, and through software we are trunking the laptops. My Cisco switch port is setup trunked and allowing all 3 VLANs. I setup the Linksys (or hope I did correctly) to trunk and allow all 3 VLANs. My workstations only access VLAN 10 and 100. I can now no longer bring up the multicast IP 224.1.1.100 on the AmiNET or the laptops. Like I stated before, the video feed is running on VLAN 20. Is there some sort of additional configurations needed for my Linksys that I'm missing so that I can view the video on my AmiNET? Do I need to create a multicast group in the Linksys in order to view it?
I'm not as worried about the laptops, but need the feeds on the AmiNET.
Any help is extremely appreciated!

Right now, there is no way to inject a live wired video feed to the pad. Maybe next year.
But if you are in a goofy 'try this' mode....
1. Face time. If the bowling alley has a viable wifi network, do a face time connect, put an I phone on a stick and see the screen on your pad.
Or if there is no wifi,
2 an app called tango does video conference over 3G. Not real good, and totally dependant on signal quality, and eats away at your data cap, but would work in a pinch.

Similar Messages

Beige Powermac g3 No video feed

I boot it and get a boot sound and no video feed HELP!

I've used the adapter shown here with various VGA (CRT 4:3) 15"-19" multi-sync displays, and set switches 1, 4, 6, 7, and 8 to the ON position. I can't advise you on the ViewSonic adapter. As for the beige G3 and OS X, you can install up to OS 10.2.x (Jaguar), provided that the hard drive has been partitioned as directed (search Apple's Knowledge Base for info) and that you have adequate system memory (I'd recommend at least 256 MBs). Installing OS 10.3.x (Panther) would require the use of the utility "XPostFacto," available as a free download from Other World Computing. If the computer's built-in ethernet port is actually dead, you can always install an ethernet PCI card.

Using FCP for live video feed

Hi,
I'm currently shooting with the new HVX200 Panasonic camera. We're using a small, 7" hand-held HD monitor to use for focus-pulling, but I'd like to be able to use a computer monitor or laptop for a live video feed. (director's monitor)
We've considered using the component-out to go into a Component-VGA adapter for a computer monitor, but I'm wondering if we can do a direct feed using FireWire into FCP or something.
Anyone have any experience doing a computer-monitor setup for use with these kinds of cameras?
Thanks for the help!
-RF
Everything Mac OS X (10.4.6)

hey there RI,
if you've tried something similar on your iMac & had no problems it's reasonable to think/believe it will work on your MBP, w/ this caveat: the 400 & 800 ports are actually on the same buss, so the 800 port will handle it's data at the lower(400) rate if there is a device on each port. shouldn't affect any editing w/ the drive once the cam is removed from the MBP. it should the run @ the higher rate.
good luck.

Can't get video feed

Hey! I've attached several cameras to my computer, and OnLocation has recognized the camera. It'll even say "Video feed interrupted" or something like that when I disconnect the camera. However, I haven't been able to get any image in OnLocation of any kind. All I get is a blank screen. Any suggestions?

Since you're shooting DV, not HDV, that rules out the trial version as the cause--the trial does not support HDV.
Which means more questions:
* Do you have any other programs running that could be grabbing the video stream. (Only one program can tap into that stream at a time.)
* How long is the FireWire cable? (Longer cables are more likely to fail, although that's less of a concern with DV than DVCPROHD.)
And some suggestions:
* Try another FireWire cable.
* Try a different FireWire port or, if possible, a different card altogether
* If no other cables or cards are available, try at least unplugging the cable from the computer and plugging it back in and/or cycling power on the camera.
Also, you did not respond re: the version you're running.

Camera live video feed to mac?

My camera outputs a HDMI live video feed. Can I desplay this on my IMAC 21.5'' 2011. I want to use my camera as a stop motion capture device so essentially it would be a webcam. Can you help Oliver.
My camera is a Sony Cyber shot HX200V.

Is hdmi it's only output or port?
A cheap altrnative for webcam & mic...
http://eshop.macsales.com/item/MacAlly/MEGACAM/

Port protected on trunk ports

I have a router to a 3550 switch feeding in a star toplogy one 2950 off each port. I have port protprected on the ports of each of the 2950s. The question is can I do port protected on all my trunk ports except the uplink port on the 3550? I am wanting to stop any user on the network from seeing another. My other option is to do a vlan per switch but would perfer not to bring down the network as it is already live and in heavy usage.
Thank you for your help in advance.

Yes, you can enable protected mode on trunk ports
Configuring Protected Ports
Some applications require that no traffic be forwarded between ports on the same switch so that one neighbor does not see the traffic generated by another neighbor. In such an environment, the use of protected ports ensures that there is no exchange of unicast, broadcast, or multicast traffic between these ports on the switch.
Protected ports have these features:
•A protected port does not forward any traffic (unicast, multicast, or broadcast) to any other port that is also a protected port. Data traffic cannot be forwarded between protected ports at Layer 2; only control traffic, such as PIM packets, is forwarded because these packets are processed by the CPU and forwarded in software. All data traffic passing between protected ports must be forwarded through a Layer 3 device.
•Forwarding behavior between a protected port and a nonprotected port proceeds as usual.
•Protected ports are supported on 802.1Q trunks.
link:
http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_20_ea2/configuration/guide/swtrafc.html#wp1158863
HTH

Live video feed to JMF

Hey i am new to java and been trying to figure out how to connect a video feed through JMF. I thkn i am taking the wrong appraoch, can anyone stear me in the right direction? thanks

Is hdmi it's only output or port?
A cheap altrnative for webcam & mic...
http://eshop.macsales.com/item/MacAlly/MEGACAM/

FireWire Video Feeds

I have the MacBook Pro with two firewire ports, the 400 and 800. Is there any way to use both ports at the same time with video feeds? I am needing to use one with Quicktime Broadcaster and the other with a Sony Camcorder. So far, the programs that i need to use them will only recognize one at a time. Is this a software issue? I am looking to record the HDV feed in its native form from one firewire feed, and the other feed is used from a dv converter for Quicktime broadcaster. Thanks for any help.

Nevermind I actually got it to work.
Thanks!

Video feed through ASA

I have a setup using an ASA 5510 8.2(2). In the DMZ (192.168.12.x) there is a server, switch and multiple cameras for surveillance of the site. In the Inside (140.152.25.x) are the pcs that can run the client software to view the video feed, or it can pull from the server in the DMZ.
On the server in the DMZ, you can see the feed, along with any pc you connect to that network.
On any machine on the Inside, or through VPN, you cannot either with the client software or pulling from the surveillance server.
I am watching the connection through ASDM and don’t see any particular port being blocked, but I do see TCP connections being terminated by inspection. So far I’ve taken out inspections for http and rstp. I don’t really see anything else that would drop video. I've attached the error I keep seeing.
Anyone have experience with something similar?
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
Ethernet0/1             Inside                 140.152.25.1   255.255.0.0     CONFIG
Ethernet0/3             DMZ                   192.168.12.1   255.255.255.0   CONFIG
access-list inside_nat0_outbound extended permit ip 140.152.0.0 255.255.0.0 192.168.12.0 255.255.255.0
access-list ROKVPN_splitTunnelAcl standard permit 192.168.12.0 255.255.255.0
access-list DMZ_access_in extended permit icmp any any echo
access-list DMZ_access_in extended permit icmp any any echo-reply
access-list DMZ_access_in extended permit icmp any any time-exceeded
access-list DMZ_nat0_outbound extended permit ip 192.168.12.0 255.255.255.0 140.152.0.0 255.255.0.0
access-list DMZ_nat0_outbound extended permit ip 192.168.12.0 255.255.255.0 192.168.220.0 255.255.255.240
access-group inside_access_out in interface Inside
access-group DMZ_access_in in interface DMZ

sh service-policy inspect http
Global policy:
Service-policy: global_policy
    Class-map: inspection_default
      Inspect: http, packet 1510005, drop 0, reset-drop 0
I'm new to this ASA, I've questioned that access list myself, but am not positive why it has been set up the way it has. I've been on the phone with TAC, so far they have not been able to come up with an answer, but still working on it.

After upgrading to mountain lion, my ip camera video feeds time out

I've been using my iMacs for a few years to monitor six ip Camera video feeds. The cameras I use are both FOSCAM and AXIS brands. I've used a few third party software solutions to do the monitoring, but I could also always use Safari to access a camera at a time by putting that camera's IP address in the address field and logging into the camera.
After upgrading to Mountain Lion, my video feeds started timing out when using DComplex's IP Camera Viewer, so I thought initially it was strictly an issue with that third party app. However, I then logged into my cameras using Safari and they timed out as well. Similarly, when using Axis Camera viewer, my video feeds would time out. It seems as whatever the issue, it does not affect Firefox, because I can still login and monitor 1 feed at a time using that browser without any timeout issues, and for some odd reason, the FOSCAM only program uFoscam works, but the problem for me with that app is that it only works with Foscam, and not the Axis cameras (besides it's an inferior program to IP Camera Viewer in my opinion as well).
Has anyone encountered this problem and come up with a solution? I'm thinking it's some sort of plugin or video codec problem, but it's well above my paygrade to figure it out.

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

Is there a way to use Illustrator to draw over a live video feed coming from my microscope?

Hi, we use illustrator to draw (trace) over static images of mite specimens taken under a microscope. Although this works, it would be much better to be able to draw directly from the live video feed coming from my microscope. The specimens are dead, so they are not moving around, however, we need to focus down through the specimen in order to see all details. We normally take montage images, but because the specimens are clear there are many artifacts present and we frequently have to consult the specimen under the microscope to double check things. My students and I have hundreds of drawings to complete and are looking for a way to streamline the process. If we could avoid making montage images and draw direct from the video feed, it would revolutionize the way we approach our research. Is there a way to display the video feed and then overlay Illustrator so that we can directly trace over the image (we use a Wacom tablet, but that shouldn't make a difference) so we can focus at different levels and draw the entire organism?
Thanks for your help
Ashley

Maybe it's possible to have live video in Illustrator, but you would most certainly need to write your own plugin.
So this community would be suitable:
http://forums.adobe.com/community/illustrator/illustrator_sdk?view=discussions

How can I make a video feed in Muse?

So, I have a youtube channel, and I really want to have a website that people can go to see my videos as well. So I am wondering, is there any way that I can set up an automatic video feed in adobe muse so that every time I upload a video, it will be put on my website? I am not familiar with coding, that is why I use muse, but I could if I learned. If I can't set up an automatic video feed, do you have any ideas of a classy way to show all my videos? I can go in and manually add them evey time I upload a new one, but I want a classy way to display them so users can pick which ones to view and stuff.
Thanks so much for your help!

I doubt MU can do this. It's pretty limited in scope & I don't think it supports server-side code which you would need to parse feeds. But feel free to post your question in the MU forum. Maybe somebody there has a workaround.
http://forums.adobe.com/community/muse/help_with_using_adobe_muse
Nancy O.

How To Select One Video Feed During A Conference

I have a need to conference with three people and show them a single video presentation. I only need to hear their audio feeds, I do not need to see their video, and they do not need to see each other.
I thought it was possible in iChat to select which of the two conference windows would be full screen. But I don't seem to be able to find a way to do this.
To be clear –
I have a video which is essentially my video feed.
I need to have two different people in two different locations see it at the same time
I need to be able to hear their comments.
I don not need to see them, and they do not need to see each other.
When the screen is split into two windows at an angle, the quality of the video I am sending degrades and the the forced presentation perspective makes the picture even harder to see. Also, there is no reason to tie up the bandwidth with video feeds from my collegues. The ONLY need to see the video, not each other. We all only need to hear each other (my audio is run throug a mixer so I can send video audio as well as my voice).
I thought about trying a video/audio conference, but can't figure out how to invite them to a video chat if they are both audio only. I did mangae to get one of them online as audio only, but it still created the same presentation screen only with a static placeholder where the video would normally be for one of them.
Is there any way to do what I want, i.e. share a single video source with multiple people in full screen, and enable two way audio with all parties at the same time?

Hi,
I thought about trying a video/audio conference, but can't figure out how to invite them to a video chat if they are both audio only. ...
This can be done if the Buddy goes to the Video menu and Disables the Camera (or Video chat if Lion).
However you are right in that iChat presumes there will be video and still places the place holder for that "Video"
I must admit to not having tried this with two Audio Only Buddies whilst sending Video myself.
Logic says it should be possible.
iChat does base the video quality on what it can manage.
This is based on your upload speed and that (download) of the Buddies.
(one Buddy can slow thing up to an extent that in 3 and 4 way chats the Video will drop off - normally the last person added)
If you can get One Way Video with two Audio Only Buddies the Bandwidth issue should not raise it's head.
However things to try:-
In iChat Menu > Preferences > Video section set the Bandwidth Drop down to 1Mbps (Also try it at 500kbps)
The 500kbps is high enough for 3 and 4 way full on Video chats but you may have issues if the Streamed Video is more detailed than the 640 X 480 pixels for ichat Best rate in iChat 5 (720 X 480 in iChat 6). AT this point you lose out to iChat trying to process the Video.
Strangely the Yahoo App for Mac does exactly what you want. (At least in one to one chats)
It deals with Video as a Stream that others can then look at whilst Audio is more like ichat in that it is Buddy to Buddy.
I don't have enough Buddies in Yahoo (And using the Yahoo App to test this further.
9:28 PM Thursday; February 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with an app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on th

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
Thankyou.

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
Thankyou.

Access to trunk port clarification

Hello-
I am looking to clarify a point of confusion for myself regrading connecting an access port to a trunk port. Consider the following switchport config on switch1:
Switch#1
interface GigabitEthernet0/5
switchport
switchport access vlan 6
....and the corresponding config on it's neighbor:
Switch#2
Interface GigabitEthernet10/8
switchport
switchport mode trunk
switchport trunk allowed vlan 1,6,100
My first question is- Is this a valid configuration? Secondly, what would the expected results be? I am curious about what vlans would be allowed to pass through..
Thanks in advance-
Brian

This would work fine but not recommended.
Also the traffic between the switches would be only Native Vlan and vlan 6 will pass through.
SW1-----F0/1----------f0/1----SW2
SW1#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/1 auto n-802.1q trunking 1
Port Vlans allowed on trunk
Fa0/1 1-1005
Port Vlans allowed and active in management domain
Fa0/1 1,6
Port Vlans in spanning tree forwarding state and not pruned
Fa0/1 1,6
SW1#
SW2
SW2#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/1 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa0/1 1,6,100
Port Vlans allowed and active in management domain
Fa0/1 1,6,100
Port Vlans in spanning tree forwarding state and not pruned
Fa0/1 1,6,100
SW2#
2) Part of this config is that any vlans which are been configured under the SW1 would be allowed through that access port.
ex:
SW1#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/1 auto n-802.1q trunking 1
Port Vlans allowed on trunk
Fa0/1 1-1005
Port Vlans allowed and active in management domain
Fa0/1 1,6,10,20,30,40,50,60,70,80,90,100
Port Vlans in spanning tree forwarding state and not pruned
Fa0/1 1,6,10,20,30,40,50,60,70,80,90,100 ...>>>>>>>>>>all vlans are allowed here.
b)
Were as on Switch 2 if you create all these vlans and u dont allow that to go through the trunk interface which you have configured those vlans would nt be flowing through.
eg;
SW2#sh int tr
Port Mode Encapsulation Status Native vlan
Fa0/1 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa0/1 1,6,100
Port Vlans allowed and active in management domain
Fa0/1 1,6,100
Port Vlans in spanning tree forwarding state and not pruned
Fa0/1 1,6,100>>>>>>>>>>>>>>>.Only 3 vlans would be flowing through due to explicit defined. but if you defined allowed all then all vlans would be shown here.
i created all the vlans above on sw2 but you can see only 3 vlans are allowd as you have explicitly defined it.
Hope this clarifies your query.
Regards
Inayath
*************Plz dont forget to rate posts***********

Video feeds on trunked port

Similar Messages

Maybe you are looking for