Video file size limit in iPhoto??

I recently used my entire 2 gig memory stick in video mode on my Sony H1 digital camera. Upon connecting the camera to my iMac, iPhoto did launch, but after repeated trys, there was no 25 minute video in my iPhoto gallery. This has always worked before, although always with shorter clips. I am wondering if iPhoto has a file size limit for video clips?
iMac G5 20 1.8 GHz - 512MB Ram Mac OS X (10.4.1)

Hi Forest,
When iPhoto 5 first came out I really think it was programmed to import the smaller 30 sec video clips that cameras were taking at the time. Since then, digital cameras, at least my Canon S2 can take clips as large as your memory card can hold. The first time I tried to download my images and movie clips with my new camera, iPhoto stalled at the movie clips. I wasn't going to take any chances messing up my iPhoto Library so I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
This way I have the photos in iPhoto and I also have just the photos backed up to DVD.
The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive.
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

Similar Messages

Video file size limit for Flash 8?

Is there a one? Having trouble with a 2.5 Gig Quicktime DV.

What are you trying to do with it? I can't imagine trying to
stream that....
I've loaded 10+ Gig .mov files into the Flash 8 On2 VP6
encoder with no problems.

Is there a file size limit for video in Adobe Presenter?

I am uploading video to PowerPoint using Presenter and want to know if there is a limit or best practices for video file size.

If you right click on the file (navigate to it using finder, or if it is in iCloud you should open keynote, File -> Open and you should see a list of your iCloud keynotes) then press command+i, you'll pull up the info tag which will tell you the file size.
Keynote also has an option to Reduce File Size (File -> Reduce Files Size) but I do not recommend it at all because it will severely degrade the quality of your pictures.
It's also possible to reduce an individual image's memory size in your keynote by right clicking it and selecting Reduce Image File Size). This is more time-consuming but allows you to see if the degraded photo quality is still good enough, and you can always undo it.

LabView RT FTP file size limit

I have created a few very large AVI video clips on my PXIe-8135RT (LabView RT 2014). When i try to download these from the controller's drive to a host laptop (Windows 7) with FileZilla, the transfer stops at 1GB (The file size is actually 10GB).
What's going on? The file appears to be created correctly and I can even use AVI2 Open and AVI2 Get Info to see that the video file contains the frames I stored. Reading up about LVRT, there is nothing but older information which claim the file size limit is 4GB, yet the file was created at 10GB using the AVI2 VIs.
Thanks,
Robert

As usual, the answer was staring me right in the face. FileZilla was reporting the size in an odd manner and the file was actually 1GB. The vi I used was failing. After fixing it, it failed at 2GB with error -1074395965 (AVI max file size reached).

4GB File Size Limit in Finder for Windows/Samba Shares?

I am unable to copy a 4.75GB video file from my Mac Pro to a network drive with XFS file system using the Finder. Files under 4GB can be dragged and dropped without problems. The drag and drop method produces an "unexepcted error" (code 0) message.
I went into Terminal and used the cp command to successfully copy the 4.75GB file to the NAS drive, so obviously there's a 4GB file size limit that Finder is opposing?
I was also able to use Quicktime and save a copy of the file to the network drive, so applications have no problem, either.
XFS file system supports terabyte size files, so this shouldn't be a problem on the receiving end, and it's not, as the terminal copy worked.
Why would they do that? Is there a setting I can use to override this? Google searching found some flags to use with the mount command in Linux terminal to work around this, but I'd rather just be able to use the GUI in OS X (10.5.1) - I mean, that's why we like Macs, right?

I have frequently worked with 8 to 10 gigabyte capture files in both OS9 and OS X so any limit does not seem to be in QT or in the Player. 2 GIg limits would perhaps be something left over from pre-OS 9 versions of your software, as there was a general 2 gig limit in those earlier versions of the operating system. I have also seen people refer to 2 gig limits in QT for Windows but never in OS 9 or later MacOS.

File size limit of 2gb on File Storage from Linux mount

Hi!
I setup a storage account and used the File Storage (preview). I have followed instructions at
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx
I created a CentOS 7 virtual server and mounted the system as
mount -t cifs //MYSTORAGE.file.core.windows.net/MYSHARE /mnt/MYMOUNTPOINT -o vers=2.1,username=MYUSER,password=MYPASS,dir_mode=0777,file_mode=0777
The problem is that I have a file size limit of 2gb on that mount. Not on other disks.
What am I doing wrong?

Hi,
I would suggest you check your steps with this video:
http://channel9.msdn.com/Blogs/Open/Shared-storage-on-Linux-via-Azure-Files-Preview-Part-1, hope this could give you some tips.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

File size limit

Hi All,
I am just asking this question about the file size which we can upload to BI cubes . Is there any file size limitation for the same.
I have not experienced any thing like this in past but just want to know incase anthing has been mentioned by SAP any where as I could not find any figure for the same.
Secondly if there is a DB connect between a source system and SAP BI , is there any size consideration for data transfer .
I tried to surf around and i have not experienced any thing such in the past .
Will appreciate your replies
Rahul

Considering the new recommended specifications for video podcasts and Apple TV, will this file size limit be increased?

Is there a file size limit when creating iPad apps?

When creating an iPad app that has a lot of video in it, what is the file size limit?

ask on the developer forums at http://devforums.apple.com

QT 7.2 file size limit

Hello: I am trying to download video taken at a recent meeting that is broken up into several parts. I have been able to download those parts that are < 2 GB in size and play them successfully, but the files that are < 2 GB in size are different. The whole file downloads(i.e. the Movie Inspector shows a file size of 2.34 GB) but audio and video stop after about 1:10'14", which I think corresponds to about 2 GB of data (if I Apple-I the file, it is shown as 2 GB (not 2.34 GB) in size.
Data from Movie Inspector window: AAC, Stereo (L R), 44.100 kHz
H.264 Decoder, 1280 x 720 (1248 x 702), Millions
It seems that I have downloaded the whole file but only the first 2 GB will play. How can I get the whole file to play (I am using QT PRO)
Thanks!

Were these files stored on or transfered from a FAT 16 formatted drive?
Only it has the 2 GB file size limit. No limit on QuickTime file sizes.

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

FILE and FTP Adapter file size limit

Hi,
Oracle SOA Suite ESB related:
I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
2) For structured files, could someone help me in debatching a file with the following structure.
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_2
300|Line_id_2|1234|Location_ID_2
400|Location_ID_2|1234|Dist_ID_2
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_N
300|Line_id_N|1234|Location_ID_N
400|Location_ID_N|1234|Dist_ID_N
999|SSS|1234|88|158
I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
999|SSS|1234|88|158
Thanks in advance,
RV
Edited by: user10236075 on May 25, 2009 4:12 PM
Edited by: user10236075 on May 25, 2009 4:14 PM

Ok Here are the steps
1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
<jca:binding />
        <operation name="MoveWithXlate">
      <jca:operation
          InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
          SourcePhysicalDirectory="foo1"
          SourceFileName="bar1"
          TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
          TargetFileName="purchase_fixed.txt"
          SourceSchema="address-csv.xsd"
          SourceSchemaRoot ="Root-Element"
          SourceType="native"
          TargetSchema="address-fixedLength.xsd"
          TargetSchemaRoot ="Root-Element"
          TargetType="native"
          Xsl="addr1Toaddr2.xsl"
          Type="MOVE">
      </jca:operation> 7. Edit the outbound header to look as follows
    <types>
        <schema attributeFormDefault="qualified" elementFormDefault="qualified"
                targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
                xmlns="http://www.w3.org/2001/XMLSchema"
                xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
            <element name="OutboundFileHeaderType">
                <complexType>
                    <sequence>
                        <element name="fileName" type="string"/>
                        <element name="sourceDirectory" type="string"/>
                        <element name="sourceFileName" type="string"/>
                        <element name="targetDirectory" type="string"/>
                        <element name="targetFileName" type="string"/>
                    </sequence>
                </complexType>
            </element>
        </schema>
    </types>   8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
    <assign name="Assign_Headers">
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:fileName"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
      </copy>
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:directory"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
      </copy>
    </assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
cheers
James

S1000 Data file size limit is reached in statement

I am new to Java and was given the task to trouble shoot a java application that was written a few years ago and no longer supported. The java application creates database files the user's directory: diwdb.properties, diwdb.data, diwdb.lproperties, diwdb.script. The purpose of the application is to open a zip file and insert the files into a table in the database.
The values that are populated in the diwdb.properties file are as follows:
#HSQL Database Engine
#Wed Jan 30 08:55:05 GMT 2013
hsqldb.script_format=0
runtime.gc_interval=0
sql.enforce_strict_size=false
hsqldb.cache_size_scale=8
readonly=false
hsqldb.nio_data_file=true
hsqldb.cache_scale=14
version=1.8.0
hsqldb.default_table_type=memory
hsqldb.cache_file_scale=1
hsqldb.log_size=200
modified=yes
hsqldb.cache_version=1.7.0
hsqldb.original_version=1.8.0
hsqldb.compatible_version=1.8.0
Once the databsae file gets to 2GB it brings up the error meessage 'S1000 Data file size limit is reached in statement (Insert into <tablename>......
From searching on the itnernet it appeared that the parameter hsqldb.cache_file_scale needed to be increased & 8 was a suggested value.
I have the distribution files (.jar & .jnlp) that are used to run the application. And I have a source directory that was found that contains java files. But I do not see any properties files to set any parameters. I was able to load both directories into NetBeans but really don't know if the files can be rebuilt for distribution as I'm not clear on what I'm doing and NetBeans shows errors in some of the directories.
I have also tried to add parameters to the startup url: http://uknt117.uk.infores.com/DIW/DIW.jnlp?hsqldb.large_data=true?hsqldb.cache_file_scale=8 but that does not affect the application.
I have been struggling with this for quite some time. Would greatly appreciate any assistance to help resolve this.
Thanks!

Thanks! But where would I run the sql statement. When anyone launches the application it creates the database files in their user directory. How would I connect to the database after that to execute the statement?
I see the create table statements in the files I have pulled into NetBeans in both the source folder and the distribution folder. Could I add the statement there before the table is created in the jar file in the distribution folder and then re-compile it for distribution? OR would I need to add it to the file in source directory and recompile those to create a new distribution?
Thanks!

Is there a Maximum file size limit when combining pdf files

I am trying to combine files 8 PDF files created with i Explore using Acrobat XI Standard, the process is completed but when opening the file not all 8 individual files have been combined only the first two have been combined, the process shows all eight being read and combined.
I can open and view each of the original 8 individual files and read the content without any issue, the largest of the eight files is 15,559kb and the smallest is 9,435kb
if anyone can assist that would be most appreciated

Hi Tayls450,
This should not have happened as there is no maximum file size limit when combining PDFs.
Please let me know if there are some password protected PDFs also?
Also, I would suggest you to choose 'Repair Acrobat Installation' option from the Help menu.
Regards,
Anubha

Folio file size limit

In the past their were file size limits for folios and folio resources. I believe folios and their resources could not go over 100MB.
Is their a file size limit to a folio and its resources? What is the limit?
What happens if the limit is exceeded?
Dave

Article size is currently capped at 2GB. We've seen individual articles of up to 750MB in size but as mentioned previously you do start bumping into timeout issues uploading content of that size. We're currently looking at implementing a maximum article size based on the practical limitations of upload and download times and timeout values being hit.
This check will be applied at article creation time and you will not be allowed to create articles larger than our maximum size. Please note that we are working on architecture changes that will allow the creation of larger content but that will take some time to implement.
Currently to get the best performance you should have all your content on your local machine (Not on a network drive), shut down any extra applications, get the fastest machine you can, with the most memory. The size of article is direclty proportional to the speed at which you can bundle an article and get it uploaded to the server.

Video file size in Zen Moz

I recently bought a Zen Mozaic and I've stored some avi movies in it. As avi videos can take many disc space ( up to 700 MB) I tried to shrink the video size (by lowering the resolution). Although in my computer, these files have shrunken in size, when I converted them to my Zen, they still take as many disc space as the original files.
Is there any way I can shrink avi video file size in my Zen Mozaic?

Try changing the files to wmv format , it worked for me .....

Video file size limit in iPhoto??

Similar Messages

Maybe you are looking for