Video files in Portal

Hi Friends,
Can anyone please tell me what could be the PROS and CONS of adding a video file in the portal.
Have anyone tried this in their portal ?
Points will be awarded.
Thanks in advance,
Cheers,
Sathya

Hi Sathya,
I dont understand what you meant to say by pros and cons. what could be the pros and cons of bringing in a audio or video file from outside. Any file that is supported by Portal, can be included in teh portal. For example, SDN has lot of audio and video files for the SDNers.
Regards,
Ganesh N

Similar Messages

  • Attach video file as a help to BW reports on the portal

    Hello,
    I would like to attach video file as a visual manual to BW reports published on the portal (one vide file to many reports)
    Can somebody tell me what is best way to do it.
    Thanks

    Hello.
    The best way is your way and depends on your requirements and available resources.
    I can only give you a few points to start from:
    1. You may use either Help property of BW reports iviews or [Dynamic Navigation iView|http://help.sap.com/saphelp_nw04/helpdata/en/32/66c53e5ae84d3be10000000a11405a/frameset.htm] to point users to a video. The second variant is most visible to users.
    2. Video may be stored:
    2.1.  in KM and played by:
      a) software on user's workstation.
      b) custom developed iView which holds streamed video.
      c)  javascript/flash video player embedded in custom KM html page.
    2.2. on an intranet media server or external video hosting as Youtube. If a security concern does not matter, in general you have only provide a URL to the video.
    Best regards,
    Aliaksandr Zhukau

  • Error while trying access video file in KM Content

    Hi All,
    I are having an issue while trying to access video files located in KM.
    When we try to access the file we get and error : getting content of document failed: /usr/sap/pa8/SYS/global/config/cm/ep/content/73/47/6176162974773.CONTENT (no such file or directory)
    The file is a .wmv file and has a size of 49 MB. Whereas some other files of size 34 MB opens up with no issues.
    This is happening on production environment but the same works fine in pre prod environment.
    I am trying to access the file from Content Administration -> KM Content
    This issue is happening for multiple files of larger size in that environment. Please suggest how to rectify the issue.
    Regards,
    Somnath.

    Hi Somnath
    The issue you are facing is dealt in the below Note. Kindly check if you are at the specified SP and
    Patch level as per your Portal Version according to the note or not.
    1849886 - Content could be lost when using DBFS repository
    Regards
    Santarshi Samanta

  • Problem on DMM 5.0 for Video files created in Adobe Premier CS4

    We are using a DMM version 5.0.0 and created video files in Adobe Premier CS4. I have saved different file versions ( mpeg1, mpeg2, mpeg2 DVD, Flv) but to no success, could not get it to work on our system. Is there a specific way to save files in this version (CS4)of Premier?

    Maria,
    What device are you going to use the video content for?
    Digital Media Players(DMPs) or Video Portal?
    Check out the following Cisco link:
    Cisco Digital Media System Compatibility Information
    http://www.cisco.com/en/US/docs/video/digital_media_systems/dms_compat.html
    The Link goes over all supported media types.
    Also, Adobe's Link.
    Supported file formats in Premiere Pro CS4
    http://kb2.adobe.com/cps/405/kb405978.html
    You can use the two links to cross reference the file formats that are available to
    the ones you need for DMS content.
    If this answers your question, Please take time to mark thisdiscussion answered & rate the response.
    Thank You!
    T.

  • Uploading Large videos Files to SharePoint 2010

    Uploading Large video  Files to SharePoint 2010  for employee training portal
    Saidireddy

    Hello ,
    The default maximum file size for SharePoint Lib is 50 MB. You can change the maximum file upload size in SharePoint 2010 .However;
    a large volume of very large files can affect farm performance.
    Ref to change maximum file upload size 
    http://aryannava.com/2011/05/30/how-to-change-the-maximum-file-upload-size-in-sharepoint-2010/
    I would suggest you that instead of uploading large files to SharePoint, you can Upload those files to File server or
    media steaming server and Share those links to SharePoint server.
    You can embed those links to SharePoint Silver Media player in .mp4 or .wmv formats. 
    Best Regards Kuldeep Verma
    Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it
    was useful.

  • How to Upload  and Download and run video in webcenter portal

    using java and oracle Database and windows media player

    While I'd like to first point out that your in the wrong forum for WebCenter portal (this is strictly for ALUI/Interaction), assuming you have the video files, you can upload them to a windows media server which will generate embed'able links which you can then use in your html.

  • How do I find the size of a video file in iTunes store?

    Is there any way to find out how big a video file is before I download it to my computer? I see that movies show the file size in the product description, but what about episodes of a TV show? Or a complete season? Or a video in iTunes U?
    I tried "right clicking" (or whatever that's referred to on a Mac, sorry, I just recently got my Mac) to get info on a few files, but it says the size is unavailable. I have an iPod Touch I'd like to get videos for, but I don't have a ton of space after putting all my music on it, so that's why I'd like to know the file sizes in advance.

    You can figure for a 1 hour TV show - about 40-45 minutes of video - you will have a file size of about 450-550 meg.
    A movie such as Pirates of the Carri..... will weigh in around 1.6-1.8 gig.
    MJ

  • I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook.  I had just finalized a project, went to work on another one and files couldn't be found, were not deleted how do I find them?

    I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook.  The other day I had just finalized a project and went to work on another one and when I opened the project I could see what should have been there, but scrolling over the entire clip I would only see black and that the file was missing.  I did not drag anything on the hard drive to the trash or move anything.  How can I get those files?  These are videos of my kids and I am devastated and willing to try anything!

    Control click does not work - no option to find files.  I have no idea what to do.  When I look at the usage of the external drive the space is being used, but I cannot find the files.  I am going to try MacKeeper's Undelete and see if I can make any progress with it. 

  • Unable to upload video files via iframe in safari version 3.0

    I m not able 2 upload video files via iframe in safari 3.0.
    i m facing this issue when i try 2 upload a video file via an iframe.
    file gets uploaded properly if i m not using iframe to upload the same.
    this issue is seen only in safari version 3.0 and not in the newer version i.e (3.2.1)
    do anyone has the asnwer for this problem.....???
    would be thankful to him/her...

    Are you using a BT Home Hub with the IP Phone attached. This holds onto the SIP port that iChat uses. There is no way to get the router to release this port.
    I had to return it all to BT as unfit for purpose and switched to Eclipse!

  • Unable to Sync Video files after Itunes 9.0.3 and iPhone software update

    This is my problem with Itunes- After I the Software Update program installed iTunes 9.0.3 yesterday, and I upgraded the iPhone software (to 3.1.3.) shortly thereafter. The iPhone upgrade failed (it froze). When I restarted the computer, I had to restore the iPhone and then I synced. I could not sync my video files.
    The apps, music and "push" items sync perfectly. However, it ignores the Movies, Podcasts and iTunes U files.
    In terms of the location for these files, all of my Library and Media files are contained in a firewire external drive. They have been there since I started up with iTunes many years ago. All worked well before the Install/Upgrade.
    Problem is- iTunes ignores the pointer in Preferences/Advanced/Location and creates an empty folder, named iTunes in the Music library (in my Home directory) at every sync (even if I delete it, it recreates it on the new sync).
    Question-Why does iTunes ignore the pointer, and create a new empty folder in Home?
    Thanks for your help.

    Apparently Apple doesn't bother to test their software updates. This problem was introduced last September and has persisted through a number of updates that were supposed to address the bug. Very discouraging. I keeping holding out hope that an iTunes update will eventually fix this feature that worked fine for years before iTunes 9 was introduced.
    Unfortunately, it is impractical to go back to an earlier version of iTunes.
    I have reported this bugs several times (via iTunes feedback). If Apple actually reads the feedback, they never respond.
    It's not like there are other vendors or unknowns involved: current iMac 24, new iPod Touch, the latest version of iTunes and iPod OS.
    So what do we have to do to get Apple's attention? Stop buying music? Stop buying Apple devices? I'd love to buy the new iPad, but I'm darned if I will if they are unable or unwilling to fix this bug...

  • Error Reading Property File in Portal Component

    Hello,
    I have created a portal component that calls an api that is located in a jar file.  The documentation on the Portal Component Structure specifies putting the jar file in the PORTAL-INF/lib directory, which I have done.  The problem is, my jar file reads a property file using ResourceBundle, but it doesn't find the property file.  I have placed the property file in the jar file, and throughout the portal component structure, but it just can't find it.  Has anyone else done something similar?  If so, where did you put your property file(s) for external jars that are used in the portal component.
    EP6 SP2 Patch27
    thanks,
    Keith

    Hi,
    I had similar issues and moved the property files to PORTAL-INF/classes.
    Best Regards
    Frank

  • Which is the best software to convert the video files for itouch?

    I got a 3rd gen itouch. Is there any software that helps to convert the video files. so I can sync those files to my itouch. " Handbrake " used to work pretty good. but now i still can convert the video files to m4v format but itunes doesn't allow me to put those files in. Please Help!

    You may have different menu options than Half bit Bit Ah. The support page on how to do it is at https://support.apple.com/kb/TS1497. In part it says:
    If you did not purchase videos from the iTunes Store, they are may not be in a format that you can play on your iPhone/iPod. In many cases, you can convert them to the correct format using iTunes or QuickTime.
    * Using iTunes: Select a video and choose Advanced > Create iPod or iPhone Version
    * Using Mac OS X v10.6: Open the video in QuickTime Player and choose Share > iTunes and then select the iPhone & iPod option.
    Hope that helps!

  • Cannot delete two stubborn video files

    Hello all,
    I have two files that I have downloaded by accident from a p2p site. They are both .mkv files, which I believe makes them Matroska video files. They are trailers for movies. They appear to work fine in VLC, but when I delete them and empty the Trash they appear back in the downloads folder a couple of hours later. I have tried 'shredding' them using a shredding Dashboard widget, but they won't disappear from my downloads folder (at least, they go and then come back). My p2p program is Vuze (formerly Azureus). I have checked permissions, and I have read and write privileges. Can anyone help me get rid of these files?
    I am not amazingly adept at computer stuff, so if there's anything technical involved I'd appreciate a step-by-step guide.
    Thanks so much!
    Leigh

    Try this
    In a terminal, enter
    rm
    be sure to include a space after rm
    then take one of the video files you wish to trash and drag it into the terminal next to the
    rm
    you should then see something like
    rm /Users/nero/Desktop/test.txt
    where Desktop will be, on your machine, the folder the file is in, and
    test.txt
    will be the name of the video file.
    Once it looks correct, hit the enter key and it should be gone for good.

  • Need to convert ajp video file to quicktime

    Need to convert ajp video file to quicktime any ideas?

    More info needed.
    Where is this file? What software made it? If Web based could you provide a link?

  • My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

    My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.  When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet)  in full screen mode just fine.  When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing.  I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse.  Does anybody have an answer or a work-around for me?

    Hi Watch this video,
    If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

Maybe you are looking for