Video files of type .flv and .f4v are considered Flash files, how play them (win7)

video files of type *.flv and *.f4v are considered Flash files, how play them (win7) are files in file windows explorer?

Not sure what you are saying; are these local or online files?
Adobe does not longer provide Adobe Media Player to play local files; use a 3rd-party player like VLC Media Player.

Similar Messages

Sync when compressing HD FLV and F4V in Premiere Pro CS4

Hi. I'm trying to create PSAs for You Tube that were originally created with a small camera that produced HD Quicktime files. For YouTube they don't have to be perfect but that is what I'm working with. My computer only has 4gb of ram so I can't watch the video to test for syncronization since it just gives a slide show while editing. It never does anything but a slide show with HD video.
When I watch the original unedited Quicktime file the sync was way off. When I render out the original file in an FLV and F4V format just to test the sync it is PERFECT. Then I edited the first video taken from that session and used FLV and the sync was PERFECT. So I'm doing the second video, tested sync on the original footage, and its PERFECT.
So I thought it was okay to keep going. Everything was perfect after Premiere rendered the raw footage. The first video worked, right? The second video's raw footage sync was fixed, right?
Now that I spent all the time to edit the 2nd video, sync is TERRIBLE. I have no idea why. F4V was worse than FLV, but neither was great for video 2. So I guess I have two questions:
1) What format can I use to upload to YouTube that won't give me an unusable sync problem
2) Is there something I can do to see continuous synchronization within Premiere Pro CS4 without updating my hardware? I am using Vista 64 bit, 4gb ram, dual core intel. Do I have to make a major hardware upgrade just to get HD video not to be a slide show while running Premiere?
Thanks!

Dave,
Deleted all stuff...
You might try this "TEST" at some point if you're using equipment to record sound as outlined in the following article....at any rate you might find the article interesting anyway for the future...
----------------------sorry I should give credit to who wrote it but you can google the first line and find it maybe -----------
sync demuxed sound The Problem -
Miniature audio recorders, be they minidisc or solid state, offer a very attractive, cost effective, alternative to the traditional use of radio microphones, for the capture of remote audio sources in video recordings
These machines record the audio in a variety of different formats - MP3, WMA, WAV, ATRAC -- and in a variety of qualities - but they all suffer from the same problem. It can be difficult to synchronise the remotely recorded audio, with the camera recorded audio.
Although the time honoured tradition of an audio 'clapper board' works well enough to align the beginning of the two soundtracks, there is a tendency for the two tracks to appear to 'drift' out of sync over time - and the longer the recording, the worse the problem. In fact they do not actually 'drift', but the gradual loss of sync is a function of the camera and audio recorder sample clocks being slightly different frequencies.
The simple reason for this loss of 'sync' therefore is that the audio is being recorded at different speeds. Although the recorder will specify the sampling frequency, the accuracy is then dependent on the internal crystal oscillator of the recorder - which is, of course, a different oscillator from the one controlling the camera timing. Although these crystals may typically be accurate to within 0.005% or better, even this degree of accuracy can cause the two recorded audio tracks to be out of sync by up to 300mS after 30 minutes. Even after 5 minutes, the 2 tracks can be some 60mS different in length, in a worst case scenario.
60mS difference will cause a distinctly audible 'echo' between the two audio tracks. (Even 20mS is detectable as a separate echo).
This difference is of course totally unacceptable, and corrections need to be applied. It is important to remember that even if your audio recorder crystal is absolutely accurate, and it is the camera clock that is slightly wrong, it is still the remote audio track that will have to be corrected. The 'wrong' camera audio track is the one in sync with the video, and has to be the 'master' track.
The Solution
It is important to realise that although the sample oscillators may vary with regard to each other, they tend to be remarkably accurate over time, referenced to themselves.
This means that if you know by how much the frequency your audio recorder sample 'clock' differs from the camera 'clock', then a single correction factor will bring both tracks back into sync.
A simple procedure is outlined below, using free programs, to enable you to calculate the correction factor required for your particular recorder.
Programs required (all free):
1) AoA audio Extractor --- (not necessary if you can extract the audio track from a video recording in your NLE)
2) Audacity , a free audio editor
3) Switch , a free audio file type converter
Step 1: Set up your camera and audio recorder next to each other, and start both running
Step 2: Make a good audio 'clapperboard' point by tapping a pencil firmly onto a hard surface, as close to both camera and recorder mics as possible. This will cause a fast 'edge' to become the reference point, which will be useful later.
Step3: Let both devices run for at least 10 minutes. 20 minutes are better, but not essential.
At the end of the period, (timing not critical), make a second similar 'clapperboard' reference point. Allow a few more seconds recording, and then stop both devices.
Step 4: Download the video from the camera, and the audio from the recorder to your computer.
Step 5: Open the video file in 'AoA audio Extractor', and extract the audio from the video. Convert this audio file (if necessary) to a 48KHz 16 bit LPCM (wav) file, using the 'Switch' program linked to above. This file will be your reference audio file.
Step 6: Open the WAV file saved in the previous step in 'Audacity' - a free audio editor.
It is now necessary to save only the part of the file between the two 'clapperboard' references, which hopefully stand out clearly (if you hit the pencil hard enough in steps 2 and 3!).
This must be done accurately, to within 100th of a second, or better.
Click and drag the file to highlight the beginning section, including the first 'clapperboard' waveform. Use the 'fit selection to window' tool (immediately to the right of the 'zoom' tools) to magnify. Delete as much as possible before the 'clapper' reference. Repeat the operation until you can clearly identify the first distinct waveform of the 'clapper' reference waveform. Click, hold and place the cursor directly over the first full (clipped) waveform, where it crosses the centre line. Delete every thing to the left of that point, by clicking and dragging to highlight, and then deleting with the scissors tool.
Step 7: Repeat the above procedure for the end part of the waveform, again using the start of the second 'clapper' waveform as your reference cutting point. In this case, cut everything to the right of your selected reference point (not the left, as in the first case.)
Step 8: It is necessary to record the exact length of this new cropped waveform. This information is listed at the bottom of the window, but in a rather inappropriate format. Locate the toolbar at the top of the window, click 'Edit'-'select all' and then 'Effects'-'change tempo' . Note the length of the file in seconds in the right hand box (the left hand box is greyed out).
Record this figure. It is the reference file length
Step 9: It is necessary to convert the file recorded on the audio recorder into an identical format to the camera audio track, namely 48 KHz 16 bit PCM. If the track is not already in this format, open it in Switch, a free file transfer program, and select the output encoding as 48 KHz 16 bit, mono or stereo to fit your audio file. This program will then convert whatever format your input file is (MP3, WMA, 44.1 KHz PCM, etc) into the required 48 KHz, 16 bit format required.
Step 10: Repeat the procedures in steps 6 and 7 for this new file. Edit the 'clapper' points with as much accuracy as before, but notice that the 'clapper' waveform will appear different from the first, although hopefully with as clearly defined first ' zero crossing' point.
Step 11: Repeat the procedure in step 8, and you will notice that the overall file length is different.
Overwrite the original file length into the right hand box, and take careful note of the resulting figure in the percent change box. Make sure you record whether it is a plus or minus value - it could be either! This is the most important figure, because it represents the percentage variation between the two units.
Once you have obtained this value, simply apply it to all files recorded with the same recorder and this camera. Providing you can align the start of the file with a single 'clapperboard' mark, there is no need to repeat the rest. Simply change the length of the external audio file by the correct percentage value, to allow the two audio tracks to remain synchronised.
It may seem a long winded process, but it only needs to be done once, and could then save quite a lot of time, against the option of trying to align tracks manually in your NLE, in small sections.
You may of course wish to use an alternative audio editor, and the details of this procedure may then be slightly different, but the principle remains the same.

How to convert FLV and F4V files to other media formats

How to convert FLV and F4V files to other media formats
Nowadays, every one can download their favorite videos from video sharing websites like YouTube, Hulu, MySpace, Google Video, metacafe, Yahoo! Video, Reuters.com and so on at will. However, these video files we got are usually in the format of FLV, or F4V, which are not workable by most portable devices, or some video players and video editors on our PC. With the intention of solving these problems, this guide will show you how to convert FLV and F4V files to other video and audio formats in detail.
1. Download, install and run Pavtube FLV Converter
As soon as you run this program, the following wine red interface will show up:
2. Add files, set output format and destination folder
Input FLV and F4V files to this program by clicking on “Add” button, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press the output folder to specify the destination folder or just use the path set by default. Moreover, “merge into one file” enables you to combine multiple FLV and F4V files to be as a single file, if you have this needs, just tick it.
3. Set advanced settings
Click “Settings” button, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. on it to optimize the output quality or compress file size.
4. Convert
After all settings are done, you can press “Convert” button to start transferring, and then the following window will show you the conversion info in detail. According to the info you can manage your time and disk space properly.
Pavtube FLV Converter can definitely complete the conversion at a swift speed with excellent quality; also it adopts an advanced audio-video sync technology, so that audio and video match very well in the resulted files. Therefore you need not worry about these issues.
Useful tips:
Free online FLV downloader:
www.convertdirect.com
http://vixy.net/
http://www.videoconverterdownload.com/online-free-flv-converter.html
http://www.flv2mp3.com/
http://www.mediaconverter.org/
http://2conv.com/
http://online.movavi.com/
http://www.youconvertit.com/
http://www.playtube.com/
http://www.convert.net/

Flip4Mac

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Flv and f4v player

I'm writing On-demand player. This player need to play flv or f4v format videos.
Example: In that vod folder will available 1 video file (that is flv or f4v), I don't know what is that file format.
So first how can i check that the file format flv or f4v?
I'm trying to below like this.But this is not correct & not working. Can you suggest me how can i play or how to know video file extension?
var videoURL:String;
var videoFileName:String = "test";
var f4v:Boolean = true;
var prefix1:String = "mp4";
var prefix2:String = "f4v";
if(f4v == true)
          videoURL = prefix1 + ":" + videoFileName + "." + prefix2;
          trace("F4V OK");
    // trace(videoURL);
else{
          videoURL = videoFileName;
          trace("FLV OK");
var serverURL:String = "rtmp://192.168.1.5/vod/";
var nConnection:NetConnection;
var ns:NetStream;
var video:Video = new Video();
nConnection = new NetConnection();
nConnection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
nConnection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
nConnection.addEventListener(AsyncErrorEvent.ASYNC_ERROR, ayncErrorHandler);
nConnection.connect(serverURL);
function netStatusHandler(event:NetStatusEvent):void
trace(event.info.code);
switch (event.info.code)
          case "NetConnection.Connect.Success" :
                    connectStream();
                    break;
          case "NetConnection.Connect.Failed" :
                    break;
          case "NetStream.Play.StreamNotFound" :
                    trace("Stream not found: ");
                    break;
          case "NetStream.Play.Start" :
                    trace("Play Started");
                    break;
          case "NetStream.Play.Stop" :
                    break;
          default :
function connectStream():void
     ns = new NetStream(nConnection);
     ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
     ns.addEventListener(AsyncErrorEvent.ASYNC_ERROR, ayncErrorHandler);
     ns.client = this;
     vidDisplay.attachNetStream(ns);
     ns.play(videoURL);
     vidDisplay.smoothing = true;
function securityErrorHandler(event:SecurityErrorEvent):void
     trace("securityErrorHandler: " + event);
function ayncErrorHandler(event: AsyncErrorEvent):void

What is setting videoFileName? Also you're setting a f4v:Boolean = true; assignment above and I don't see any logic to alter this in the case it's FLV so it will always assume the video is f4v unless "something else" is changing it.
To determine between F4V and FLV you really only need to look at the files extension. You can set your bool based on that.
var f4v:Boolean = videoFileURL.toUpperCase().indexOf('.F4V') != -1 ? true : false;
Then actually run your check
if (f4v)
     // handle f4v
else
     // handle FLV
Or use a switch if you're handling more than just these two.. Something like:
var sourceURL:String;
switch (videoFileURL.toUpperCase().substr(-3,3))
     case "MP4":
          // code to set sourceURL to MP4...
          break;
     case "FLV":
          // code to set sourceURL to FLV...
          break;
     case "F4V":
          // code to set sourceURL to F4V...
          break;
     default:
          // perhaps a default to one of the formats..
If you're actually trying to load the file and determine if the extension is incorrect then you'd have to use your errors during load and attempt alternate loads until you achieve a successful load. Metadata has an ID for the codec (audio/video) as well.

I successfully uploaded a book using iBook Author. I need to make a correction. I keep getting this error message: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage)

I appreciate any help or assistance. I have been trying to update one of my books for for the past few days with no success. I really just need to change two letters. But since I was updating I thought I would make a couple more improvements. I clicked disable portrait and made my pictures a little bigger to fit the whole page. But now I keep getting this error for multiple sound effects throughout the book. ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage). I did not change the audio. The audio files are placed in widgets. I had no problem the first time it uploaded. I have recreated my whole book from scratch and it still does not work. Does anyone have a suggestion? Thank you for your attention to my question.

Florida author wrote:
Could it matter that I am dragging my audio files onto my document? They appear to be in a widget once dragged in. I use the widget insector to make changes. However, I did not go to the top of the screen and click widget and then insert my audio file.
I don't believe that would make any difference. Drag-and-drop is just a UI shortcut for using the menu items.
Also some of the audio file were used in previous books. Would that cause an error?
No. Each book is a stand-alone entity. It doesn't matter if the same audio file appears in another book.
From what people have reported here, it looks like there is a bug in the submission system. Other than trying the suggestions posted in the linked-to thread, I don't think there is anything you can do to fix it.
I would submit a bug report to Apple though. Quite a lot of people seem to be affected by this problem, and if they hear about the same problem from lots of different sources, that will (presumably) elevate the importance of fixing it.
Michi.

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free?

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.

stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work.

Help-Task not found - Please check the Task Type, Name and Location are cor

HI all,
i have upgraded my owb from version 11gr1 to 11gr2. the installation is complete and all my mappings and objects are imported successfully.
i was able to execute the mappings using the sql code:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
by logging into sqlplus as the user in whose schema mappings are deployed.
hOwever, suddenly i am getting the error since sometime back - not sure what might have happened or what might have gone wrong. can someone please help me understand what might be wrong - how to decode this?
Here is my error:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
Role set.
Enter value for 1: WSODS
Call completed.
Enter value for 2: ODS_SCHEMA
Enter value for 3: PLSQLMAP
Enter value for 4: MAPPING_1
Enter value for 6: ","
Enter value for 5: ","
Stage 1: Decoding Parameters
| location_name=ODS_SCHEMA
| task_type=PLSQLMAP
| task_name=MAPPING_1
Stage 2: Opening Task
begin
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 759
ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 910
ORA-06512: at line 2When i execute this: i get the result as follows:
SELECT warehouse_object_id, store_id, object_type_id, object_type_name, object_name FROM owb$wb_rt_warehouse_objects
where object_name = 'MAPPING_1';
WAREHOUSE_OBJECT_ID STORE_ID OBJECT_TYPE_ID OBJECT_TYPE_NAME OBJECT_NAME
15947 15325 769 PLSQLMap MAPPING_1
1 rows selectedEdited by: Chaitanya on Mar 5, 2012 3:33 AM

Hi Chaitanya,
Did you get any resolution for this error? I'm facing the same error while trying to execute OWB mapping through this command.
Any help would be much appreciated. Thanks.
Regards,
Jagari

The data types varchar and varchar are incompatible in the subtract operator

Hi ;
I want to fetch values 6,903,00 format ,my query is ;
SELECT CONVERT(varchar(50), CONVERT(money,SUM(DEBIT)),1) AS DEBIT ,CONVERT(varchar(50), CONVERT(money,SUM(CREDIT)),1),AS
CREDIT CONVERT(varchar(50), CONVERT(money,SUM(DEBIT)),1) - CONVERT(varchar(50), CONVERT(money,SUM(CREDIT)),1) AS BALANCE
FROM TABLE
it was get error : The data types varchar and varchar are incompatible in the subtract operator.
I want to Show result ;
DEBIT - CREDIT - BALANCE
6,903,00 4,387.24 2,515.76
Thanks in advance

You have to do the subtraction with the MONEY data type (prior to covert-ing).
Starting with SQL Server 2012, you can use the FORMAT command:
https://msdn.microsoft.com/en-us/library/hh213505.aspx
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014
We have to use SQL 2005 due to licensing issue .

I have CC 2014 but need AME CC (pre 2014) in order to deliver FLV and F4V outputs - how can I download CC AME with FLV support?

I have CC 2014 but need AME CC (pre 2014) in order to deliver FLV and F4V outputs - how can I download CC AME with FLV support?

You can install AME CC (7.2) by installing After Effects CC (12.2) through the Creative Cloud application.

The photo book review pdf file is fully smudged and there are many horizontal lines all over the pictures. the book looks absolutely ok , but the pdf is showing all problems. also when i uploaded the book, it was successful, but got an error message later

I created a book on I photo and uploaded it yesterday. it was all ok and the order was accepted. However i got an error message today. The book looks perfect on I Photo, when i do a preview, the PDF file is totally smudged and there are 100s of horizontal lines all over the photos. Also the coloures are bleeding all over.
what can be the case and how can i resolve this.
samir

if the book looks good order while in safe mode - then reboot into normal mode
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
Apple will stand behind the order if it does not match your preview
LN

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

I'm running OS 10.6.8. A file (C1EC7F00) has appeared and can't be trashed. How can I get rid of it?

I'm running OS 10.6.8. A file (C1EC7F00) has appeared and can't be trashed. How can I get rid of it?

Where has it appeared?
You can forcibly remove it via the terminal..this will bypass flags/permissions preventing you from deleting it.
sudo rm -rf /path/to/file/C1EC7FOO
Note that the path to file needs to be the actual path. What you do is type sudo rm -rf , then just drag the file right into terminal and the path will be entered. Make sure there is a space between "-rf" and the "path." Make sure you copy the exact command and path to file. Make sure NOT to hit Return before you drag the file into terminal if you choose the latter method. This is a dangerous command if used improperly. Very effective, though, in cases such as yours.
Once entered, hit return. Enter your password. Type "exit." Close Terminal.

I am working in windows 7 and I am trying to enable the copy/paste and I can not find user.j file in the profile and I am not real sure how to create a file, I can create a folder .

I am trying to copy text from a word document and paste it into my web builder and it says that firefox does not support copy/paste from clipboard. Went to your site and it tells me to open the user.j file in my profile. This file does not exist and I am not real sure how to create that file so I can paste the fix from your site into it.

I went to that link and added to firefox add on but it still does not work. I went to the add on option button for this but it told me that my MYSIWG widget was disabled. Does this have something to do with it not working and if so how do you enable it.

Video files of type *.flv and *.f4v are considered Flash files, how play them (win7)

Similar Messages

Maybe you are looking for

Video files of type .flv and .f4v are considered Flash files, how play them (win7)