Video files will not trenafer to my iPod after re-installing iTunes

iTunes was only updating about 1/3 of the the playlist and would stop. The Apple genious suggested I reinstall iTunes. Now all the video is missing from my iPod. They are still in my playlist but will not update. I set the Video tab to "Automatically update all videos" but when I go back to update, it is reset back to "Do not update video". I tried to set the "Manually manage songs and playlists" under the music tab but it also gets reset when I update.
Thanks in advance for your help.

Your hidden pref file is damaged. Close iTUnes then follow Scott P's steps for deleting this file.
After you delete this file in its 2 locations, when you open itunes you will have a setup wizard just like its your first time ever installing iTunes
http://discussions.apple.com/message.jspa?messageID=607357

Similar Messages

HT1386 some music will not sync back to ipod after restoring after update

i backed up my itunes library to disk prior to updating to OS6 now certain songs will not sync back to ipod even though they were purchased from itunes Help Please

If the non-syning ones play in iTunes on the coputer:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

Linda Feltner wrote:
> I cannot import or open vector files in Freehand 10. I
just get large
> Xs instead of the image. I have a MAC OS 10.3.9,
Freehand 10. I'm
> trying to import some small files that are either .ai or
.eps files
> (all are vector) that open fine in Illustrator 10 (so I
know they
> work), but I can't use them in that program. I've tried
adjusting in
> Freehand Preferences the 'convert editable EPS files" ,
on and off. I
> tried adjusting the 'Embed...." selection on and off.
Can anyone tell
> me what thing I'm doing wrong. I have two files, they
are map
> boundaries, that need to scale and adjust their color
and line width
> over an aerial map. This can't be difficult, but I must
be
> overlooking something. Many thanks in advance. Linda
>
Freehand can't convert EPS files into editable vectors. I
usually run
EPS files through Illustrator and then into Frehand. If you
don't have
Illustrator you can convert the EPS into a PDF and that
Freehand will
sometimes convert into editable vectors (though it does
involve a lot
more clean up than going through Illustrator.)

MPEG-4 Video Files Will Not Sync To iPod

I have a selection of files in MPEG-4 format that are played by iTunes but are apparently not compatible with my iPod (newest version). As far as I can see, they are identical in spec to the other MPEG-4 files that DO work. This all makes no sense to me.
Converting these files using iTunes converting process will take a month by the look of things. Does anyone have any suggestions that will get these files to work on my iPod?
Thanks

try converting it again
whazzup

Video files will not download, error message=disk space is full

I have recently started downloading video files. I have downloaded a season of a tv show. The season had 9 episodes. Three downloaded fine and the other 6 will not. When i try to download them i get a message saying error
-34 The disk you are attempting to use is full. Remove files and empty recycle bin to create space. I dont understand why it keeps doing this. I have lots of space on itunes and my computer is not full either.What can i do? How can i prevent this? Is there a problem with my computer? This is extremely frustrating. Any and all help would be very much sppreciated. Many thanks

I have recently started downloading video files. I
have downloaded a season of a tv show. The season had
9 episodes. Three downloaded fine and the other 6
will not. When i try to download them i get a message
saying error
-34 The disk you are attempting to use is full.
Remove files and empty recycle bin to create space. I
dont understand why it keeps doing this. I have lots
of space on itunes and my computer is not full
either.What can i do? How can i prevent this? Is
there a problem with my computer? This is extremely
frustrating. Any and all help would be very much
sppreciated. Many thanks
If you haven't already run disk cleanup and be sure you get the temp folder as well.
Now defrag the drive.
Also, is your drive formatted in FAT 32?
If you have XP you can switch it to NTFS without endangering your data.
Now try again.
AMD 2500+ Windows XP

Flash SWF with Video file will not play in web page

Hello Flash group,
I have created a flash video file from a *.wmv file.
myvideo.flv.
I have used flash to build an swf file that plays the video
(with a default skin).
I have then imported the media file into an html page using
Dreamweaver. I did not import the flv file, but the swf file with
the "video" in it.
The page plays find on my development server (where
Flash,Dreamweaver, etc is installed).
When I moved the html page, the flv file, the swf file and
the skin to my production webserver (linux and apache)
the flash files do not show up on the web page. The dev
server is a windows XP running apache 2.2)
Any ideas on what I need to do???
thanks,
eholz1

It may cause by any of the reason below:
- You have uploaded the flv file to the wrong directory
- Your flv file path/name is incorrect. check all case
sensitive etc.
- Your web server doesn't support FLV MIME type.
Another similar topic here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=194&threadid =1263131&highlight_key=y&keyword1=MIME
Hope it helps.

Songs purchased on iPhone through iTunes Store will not show up on iPhone after syncing with iTunes

I recently purchased iTunes Match (about a month ago). Since purchasing Match, any songs that I have bought on my iPhone 4S (32GB, Sprint) through the iTunes Store app will not sync back to my iPhone after syncing with iTunes on my computer. I have iOS 7.1.2 and iTunes 11.3.0.54. The only way I can get them to show back up in my iPhone music library so I can play them is by re-downloading the songs through the iTunes Store app. Which is super annoying because now it is about 10 songs that keep doing this, and they are in multiple playlists. Is anyone else having this problem and have you found any fixes? Really regretting purchasing the iTunes Match (which is not enabled on my iPhone, just on my computer).

How to create custom ringtones ...
1. Open iTunes.
2. Find the song that you want to make into a ringtone.
3. Listen to the song and find the part of it you want to use. The chorus may be a good place to start.
4. Write down the start and stop times of the clip.
5. Right-click the song and select "Get Info."
6. Click the "Options" tab.
7. Type in the start time of your ringtone in the text box next to "Start Time" in the minutes:seconds (i.e., 2:01) format.
8. Type in the end time of your ringtone in the text box next to "Stop Time." Make sure the ringtone is no more than 30 seconds long.
9. Click "OK."
10. Right-click your song again and select "Convert Selection to AAC." Wait for iTunes to convert your song. It will create a duplicate version.
11. Right-click the ringtone and select "Delete."
12. Click on the "Keep Files" button.
13. Find the file. It's usually in your User folder under "Music > iTunes > iTunes Music" and under the band's name. It will have an extension of m4a.
14. Replace the m4a extension of your ringtone with m4r. You can either double-click slowly to rename your file, or right-click and select "Get Info" on a Mac or "Rename" on a Windows PC.
15. Click "Use .m4r" or the PC equivalent when the system warns you that the change may affect the use of your file.
16. Double-click the ringtone file. ITunes will automatically add it to your ringtones folder in your iTunes Music Library.
17. Connect your iPhone and sync your ringtones.
Oh, also to change a file extension. (not sure on Mac), but in Windows you need to go to "control panel" select "folder options". You need to uncheck the box "hide file extension for known file types". This will allow you to view and change the files extensions.
Hope this is useful ...

My iPhone will not automatically backup to iCloud after iOS7 install

My iPhone 5 will not automatically backup to icloud anymore now that iOS7 has been installed. Steps I have tried so far...
Installed iOS7 through Software Update - relazed three days later that the phone was not backing up
Did a manual backup
Erased the entire phone
Restored from iCloud backup
Then reset all phone settings
Signed out of iCloud, deleted all data and then signed back in
Is anyone else having this issue after updating to iOS7?

my dear friend i have like your problem before and when i see alot of solution i find the one it work with me and
come autmatic again
take the solution:
Note that a manual backup also factors into the automatic backup schedule, meaning the next automatic backup will not occur until 48 hours later.
Actually the iCloud backup process sounds a bit more complicated than it actually is in practical use. You can’t schedule iCloud backups manually, but you don’t need to do so as iOS takes care of this for you, and it’s designed to be pretty transparent.
Once enabled, iCloud backups will run automatically whenever the following conditions are met:
Your device is powered on,
Your device is connected to the Internet via Wi-Fi,
Your device is connected to a power source,
Your device has the screen locked (i.e. turned off), and
It has been at least 24 hours since the last successful backup occurred.
In other words, your device may not be backed up to iCloud at the same time every day, but once 24 hours has elapsed the iPhone will make a backup as soon as it is plugged in and on Wi-Fi with the screen off. For example, if your iPhone backs up to iCloud at 10:00 pm tonight, but you don’t plug it in while on a Wi-Fi connection until midnight tomorrow night, the next backup will occur at midnight—basically as soon as you plug it in—and future backups will continue to run at midnight on subsequent days as long as the iPhone is plugged in, connected to Wi-Fi, and has the screen off at that time. If you’re working an irregular schedule and coming home at different hours, this may gradually push the backups to later at night, but the backup won’t be skipped if you miss the time window—it will still occur as soon as possible once all of the other conditions are met.
This does of course mean that sometimes backups can get pushed to the point where they may be delayed until the next night; come home at 10 a.m. on a Sunday morning and plug in your iPhone and that’s when your next backup will occur, but if you leave for work on Monday morning at 9:00 am and your phone isn’t plugged in and on Wi-Fi while at work, you won’t get another automatic backup until you get home and plug it in later that night.
You can check the time of the last successful iCloud backup by going into the Settings app on your iPhone and choosing Storage & Backup from the iCloud section.
You can also tap the “Back Up Now” button from this screen to create a manual iCloud backup at any time. To create a manual iCloud backup, your iPhone only needs to be on Wi-Fi, it does not need to be plugged in or have the screen off.
Note that a manual backup also factors into the automatic backup schedule, meaning the next automatic backup will not occur until 48 hours later.
This can be one method for adjusting to a specific backup time if you really feel the need to, but it’s largely unnecessary as iOS should naturally settle into a standard backup routine as long as your iPhone is regularly plugged in and on Wi-Fi for at least a few hours each day, such as while you’re sleeping.
As one last note, it’s also worth keeping in mind that the iPhone only needs to be connected to power with the screen off to start an iCloud backup; once the automatic backup has started, it will continue as long as the iPhone remains on a Wi-Fi connection, even if you unplug the iPhone or begin using it.

Video Files Will Not Add Into Libary

Hi,
This is the first time i have ever had a problem with iTunes in 2 years. so excuse me.
I have been using Tube Sock for a long time now, which downloads video's from you tube, converts, and adds into iTunes for me. For some reason it has stopped doing it. I cant add other videos i have got from the internet, it wont even add the sample video for the iPod. It will add music, but not video.
Can Someone help me? Thanks
BaYlisS
Intel Imac G5, 20" Mac OS X (10.4.8)
Intel Imac G5, 20" Mac OS X (10.4.8)

Well, the guide you directed me to indicates that the video conversion feature in iTunes is slow, but still should work - nevertheless, I'm still getting the error message, so something is amiss. I recall seeing something about disk permissions somewhere; but don't recall whether that was for macs or windows machines - I'm using a windows machine. Any ideas about what might cause the error code or be blocking access, and how I could remedy it? I don't think it has to do with any firewall or antivirus programs; I get no warnings that something is trying to access any files it shouldn't be, and I've also tried disabling those for the duration of the convert and so far that hasn't worked...
Help!

Compressor Video File will not play in DSP Menu

I built a menu in FCP exported to compressor, and changed the settings to progressive to get rid of the interlaced lines. When I drag the compressor file to my menu it is a solid blue and does not play. The below image is what it looks like.
I did another compressor file without making it progressive and it plays fine, but it has so many lines through it because there is a lot of movement in the video. Is there any settings I can use in DSP to make my menu play?
Thanks,
Dougomite

Progressive video is not supported in any Menu Domain per the DVD Spec. DVD is an inherently an interlaced playback platform. If your having interlacing issues, the problem is in your workflow. Is your field order correct?

My music will not sync to my iPod after updating it to IOS6

Okay so earlier this week i got notifed for a new update. I didn't want it so I cancled it. Today I watned to sync new music to my iPod but it comepletely shut down. It started to restore by itself and deleted everything. Luckily I had it back-uped to my computer so it fixed everything BUT my music. I have tried some of the tips that have been given to others on here but none of them work.
I tried "unchecking" the synv music box in the summary and all.
I tired restoring the whole thing.
I tried wifi sync and nothing. Its the same crap.
I turned off the music match and and reset it. Still nothing. This is frustrating me! So much for improving everything. This is crap.
I need help!

I also have a 4G ipod touch and a similar problem. Since I updated to the ios5 software any new songs I add to my iTunes don't sync to my ipod main playlist. They show up in the 'recently added' playlist, but not in the main 'songs' section. I fixed the problem once by restoring to factory settings and rather than reinstalling from a backup, I created a new ipod name and synced everything onto my ipod as if it was new.
This worked until the next new song I added and then the same problem started all over again. If you do reinstall everything as new, you may want to take a screen shot of where all your apps are and make sure all your photos etc are saved, as everything will be from scratch. Hope this helps!

My videos and video podcasts do not show on my ipod but do on itunes

Hello,
My videos show fine on my itunes (movies and podcasts) but then i go to try them on my ipod and the screen remains blank! please help!

That happened to me too. It was in the wrong format for my IPod to play and I redownloaded everything and it worked again. Annoying, but it worked.

Running windows XP, encountered a problem updating iTunes. Now cannot re-install it. when i try to re-install, the website acts as if nothing is wrong and will not reinstall. How do I re-install iTunes, when the website detects that it is installed?

I am running windows xp and tried to download the latest version of iTunes 11.1.4 for windows xp. Unfortunately it did not install correctly. There was a error message: Microsoft Visual C++ Runtime Library, Runtime Error!, Program:C\Program Files\iTunes\iTunes.exe, R6034, An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. Then,when I close that box, another box appears that states: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 1114). When I attempt to reinstall iTunes though the Apple iTunes website, nothing happens ( no reinstall) presumably because it detects that it is already installed. How do I work around this problem to reinstall iTunes?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have iTunes in Windows and now it will not connect to store! Tried re-installing iTunes, checked firewall but still no luck! Any ideas?

I have received a message - "i Tunes could not connect to the itunes store. An unknown error occurred (-3212)" Any ideas as to how to rectify? I have re=installed i Tunes onto my laptop and checked firewall for Apple/i Tunes acces!!

Hey glennboyes,
Thanks for the question. I understand you are experiencing issues with connecting to the iTunes Store. The following articles may help to resolve your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 3000" through "3999"
Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

Video files will not trenafer to my iPod after re-installing iTunes

Similar Messages

Maybe you are looking for