Video filters became disabled. video in timeline reverted back to glowing images. Broadcast safe button does nothing.  Black and white went back to color.  what happened to my video filters?

video filters became disabled.  My timeline now shows video in pre-broadcast safe look.  black and white video went back to original color.  video filters not responding at all.  what happened?

First thing to do is reset your fcp preferences
https://discussions.apple.com/docs/DOC-2491
Have you done any software updates or installed any new software recently?
What format are your sources and what are your sequence settings?
Here are some other troubleshooting tips
https://discussions.apple.com/docs/DOC-2591

Similar Messages

  • Videos black and white

    Hi there.
    I have a iPod 80GB, and the original iPod AV cables with docking station. I have connected the cables to my home theatre system. Music fine, and I have a cable running from video out on dvd to tv (plasma). Get picture, but in black and white. Have changed all components (dvd, iPod and tv) to PAL, still no change. Any ideas PLEASE!
    Thanks

    To everyone else who have tried the PAL to NTSC setting and still getting black and white output.
    I had a 60 GB IPod Video which I bought the A/V KIT. I set the TV out to ON made sure it was set to NTSC, even tried the S-Video Cable which I bought at Radio Shack. Tried several different TVs. I reset the iPOD, even restored it to factory settings wiping all my data and reloading the COLOR video's with no luck.
    After many fustrating searches on many websites (none of which had solutions but several others who had the same problem), I called apple support. Due to my inability to make a descion on how to repair the problem I actually ended up taking to three different support personal. Each with a different solution. The last swore up and down that it was a bad Apple A/V Cable. This made no sense since the s-Video also put out black in white.
    Finially, I was able to show the problem to the Genius at the local Apple Store who confirmed the iPOD had a defective video out chip.
    SOLUTION: IPod had to be replaced.
    WARNING; since the IPod was replaced, I no longer had the laser engraving. You may be able to ship an laser engraved iPod to Apple, but I'm not sure if they will promise to return the personilized iPod so consider carefully your choices.
    Otherwise, I love the iPod, looking forward to what iPhone is going to do.

  • Colour circles within a black and white video (after effects)

    I'm new to After Effects and am looking for a spefic effect for a video I am making.
    I was wanting a circle of colour (not too big) within a black and white video.
    Can anyone help me?
    this is an example i quickle did on photoshop

    Since you're new to After Effects, I strongly recommend that you start here to learn After Effects: http://adobe.ly/bjBT3P
    Going through the basic learning materials will make everything much easier.

  • Tecra A6-EZ6411 - Video picture is squished and made black and white

    After a recent update to Windows 7 I am having an issue with viewing pictures in Windows picture viewer and watching netflix videos. I can watch and file on my computer without issue. I can also view a picture in paint.net or any other picture viewing program. I can watch Hulu or any other cable company site without problem. What happens is the picture is squished and made black and white.
    So the first thing I tried was uninstalling silverlight and then reinstalling. The next thing I tried was booting into base mode, uninstalling all nvidia drivers then reinstalling the latest driver available. Neither of those fixed those problems. Weird thing is when I first boot into base mode and the resolution is 640X480 the pictures look normal in Windows picture viewer and when I try to watch a video on netflix it looks normal. Only when I change the resolution to anything else does it revert back to the old diplay of a shrunk black and white view.

    Install Win7 again, disable automatic Win7 updates and every time when you get message about available updates install important updates only. Before you start update installation check the list and be sure nothing strange will be installed.
    My notebook also has NVIDIA graphic card. I still use original recovery image with Toshiba driver and everything works well.

  • Want black and white video export

    i'm using a galaxy s2 smart phone. i would like my camera to transmit the video on my end (or both) in black and white. is this possible? if so, how? thanks.

    Hi(Bonjour)!
    As Ian wrote, you can see a preview by dragging the desired filter on a single clip in timeline and dragging the playhead over this filtered clip. Play it with realtime rendering or hit option-P to get the preview. If you want to tweak filter's adjustments, pay attention to double-click your filtered clip to open it in viewer and select the filter tab in viewer.
    When your custumized filter suits your need, drag it onto the favorite folder in broser--Effects tab.
    Michel Boissonneault

  • Video drivers issue (dual DVI monitors off bay :: one black and white and one color)

    Hello,
        I have tried everything to try to make these two monitors color. They are both relatively new Dell monitors. Both are DVI, both are connected to the latest Lenovo bay for my T430 laptop. Both worked fine after I initially installed both video drivers (Intel HD Graphics Driver for Windows 7 [64-bit]) and NVIDIA Optimus Display Driver for Windows 7 [64-bit]). Then out of nowhere one of them (Dell 1) decides it wants to be seen in black and white! I initially thought it was the monitor itself, but when swapping monitors (Dell 1, Dell 2) the other monitor  (Dell 2) went black and white when plugged into the DVI formerly used by the Dell 1 monitor. Ok, so now it must be the DVI ports on the bay station (Lenovo) right? Nope. I had a tech bring me a second, brand new bay (identical). Same issue! So this leads me to the video drivers...
    Does anyone have any idea. I disabled each driver and reenabled each to no avail. The drivers are the latest drivers downloaded directly from Lenovo's site. Checked the driver settings/monitor setting using both Windows 7 Professional and Nvidia to see if anything stood out. Nothing.
    Any help would certainly be appreciated. Thank you in advance! :~)

    I got a new laptop and when I plugged it into my docking station the external monitors were all in black & white.  My old computer still worked fine without changing any settings on the monitors.  I found that I needed to go into Control Panel \ NVidia Control Panel \ Display \ Adjust Desktop Color Settings, then select the monitor I wanted to adjust, then set the slider up for Digital Vibrance.  For some reason on the new laptop the NVidia settings defaulted to 0 for this.

  • Half Black and White half Color Video

    Is there a way to take a full color video and make half of the video black and white and the other half full color?  For instance imagine a line down the center of the video, on the left the video is black and white, on the right side it's full color.  Taking that concept if an object or person moves from the left to the right side of the screen, thus crossing that invisible line they automatically switch from black and white to color.
    Almost like a video mask overlay..  How would I accomplish this in FCP?  I have FCPS  not FCPX

    Why would duplicating the video onto a track above mess up the sync?
    What you need to do is edit your piece first, once EVERYTHING is where it should be, THEN do the effects...
    unlink your audio (shift-L), select all of your video clips, shift-option click and drag up. Select one of your clips, apply the desaturate or channel mixer effect and the crop... Now, if you do not have any other filters already applied to your clips, select your clip and press command-c to copy. select the rest of the clips that will be destaurated/cropped and right click, select paste attributes. Select filters and Crop, and viola... Tell me where the loss of sync is?
    Make sure to press shift-L again so that your audio & video is linked.

  • NEWB question - How do I make my video Black and white?

    I've poked around the manual, google, and the forums. I'm sure the answer is MORE than obvious, but at this time....i cannot figure it out.
    How do i get to a settings/coolor bar with sliders that will allow me to make video B&W, control saturation and brightness?
    Thanks guys!

    GOOD NEWS! Thanks to you guys, I figured it out. Within the 3-way color corrector here is what I did (for future searchers):
    - Go the effects tab.
    - Go to Video Filters> Color Correction> 3-way color corrector.
    - Click and drag the filter on the the clip in the time line.
    - Now double-click the clip you just dragged the filter on to, this should be it up in the viewer up top.
    - No, click on the 3-way color correction tab.
    - You will see 3 color wheels. Ignore them for now and notice the slider underneath them, "Saturation" or "Sat". Take this slide and move it to the very left.
    You now have black and white video.

  • DVI to Video adapter | Black and white TV display.

    - -
    Hi,
    I just pruchased a DVI to Video adapter and unfortunately, it doesn't work (the display on my TV is black and white).
    I use a S-Video cable.
    I tried restarting and using other displays.
    Thanks,
    Chris.
    - -

    Anyone else has an idea?
    The subject has been discussed here: http://discussions.apple.com/thread.jspa?threadID=2136106&start=60&tstart=0 and apparently the problem is fixed with OS 10.6.3.
    But I'm using 10.5.8! Thanks.

  • How to record video in black and white mode

    Hi,
    I am developing a live video recording application and my application  have black and white mode recording feature, So please give me some idea  about black and white recording.
    Thanks
    Ram

    Your 1200 is fine it will print in B&W using these settings:
    in the print driver drop down box, select Color Options and tick the print in Greyscale option
    then click in the Presets dropdown and select save as  and type in a description  such as " Black and White"

  • Video out black and white?

    ok i just got the apple cables for the ipod..
    when i plug it in the tv it shows it in black and white?
    i use the video plugs red to red white to white and green to yellow thats the only one that works for video..
    is it the cable or the video from my i ipod touch?
    thanks

    So your TV only has three plugs and you tried to plug in the rest of the video. See if your TV has more plugs like three videos and two audios. What you tried to do is plug a component cable into a composite jack which doesn't work. I think you bought the wrong cables. You need the composite. The ones you have is for an HDTV

  • Video camera - Need to shoot in Black and White

    We need to shoot video in black and white, We have tried to shoot in night  mode.  But the result is the colors being brighter and not lighter.  We need to do video coding with these so the colors being too bright is not working out.  any imput on a video camera that will shoot in black and white and has an SD card slot?

    I have internal memory on some of my cameras and I NEVER use it.  It's faster and cheaper to use a USB reader.  Why run down your batteries and go looking for a cable.
    What can you do with $100 savings?  Click on this link...
      http://www.bestbuy.com/site/PNY+-+32GB+Secure+Digi​tal+High+Capacity+(SDHC)+Class+10+Memory+Card/2300​...
    You might even find cheaper SD memory elsewhere.  My local computer dealer is selling 16gb for under $10!
    With the $100 savings you can spend it on a second battery.  Then again, consider spending it on an extended battery so you can record more than 30 minutes.  Unless you plan to use the camera connected to the wall at all times.

  • Mini DV to Video only shows in black and white

    I bought a mini dv to video from an apple shop so that i could watch films on my tv. I connected it to my tv at home and it worked perfectly, but when i try to connect it to my parents tv it only shows in black and white... both tvs are of roughly the same age...I'm connecting the yellow wire to the scart on the back of the tv to the yellow socket on the adapter
    how come it works on one tv and not the other one?

    When you press the INPUT button on the remote to cycle through the inputs, is "ColorStream HD" listed? Is "Video" listed?
    The Xbox is connected using 5 cables, correct? Red, blue, green, white, and red?
    - Peter

  • Vox S-Video input is black and white

    After a few issues, my Vox is up and running. The picture quality is disappointing on the TV broadcasts but of more issue for me is a problem with the S-Video input.
    The main reason I bought this was to capture old videos and transfer them to DVD. I have a scart lead attached to the back of the VCR with S-Video, Composite Video and Audio phono plugs on the other end. Using the composite video phono plug the picture is fine and I can capture the video. If I swap to use the S-Video plug (my preference as the quality should be better) it comes through in black and white. However, if I plug the S-Video and audio phonos into a television, the picture is fine.
    Has anyone experienced this or have any ideas what might be wrong?
    Thanks,
    Andrew.

    Hi Andrew.  I have the same problem.  Have you found a way round the problem?
    Pete

  • IChat video only in black and white?

    When I use iChat, the video output is only in black and white. Does anyone know how I can get it to return to full color?

    Hi,
    Click on your own Video icon so you have a Preview of your Video
    GO to the Video Menu and Select Video Effects.
    In there whichever "Page" it is On select the middle one.
    iChat will remember any Effect or, on Intels, any Backdrop you set if it is still active on ending A Video chat.
    10:26 PM Monday; February 15, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for

  • MOD_OC4J_0080 and other errors HTTP Server error log

    Our portal pages with portlets on it started giving error 503 messages (just some portlets) to clients. I have checked error log and found out that it is full of this errors MOD_OC4J_0080: After calling Apache's ap_bwrite(), got an return value: -1 a

  • MIGO - Posted lines can appear more than once

    Hi Gurus, when posting inb. dlvs. with MIGO, sometimes we get some of the lines posted multiple times, I guess we've understood the reason why but we're still looking for a solution (instead of saying to the user "leave the transaction and get back i

  • I cant get my imac to update

    My imac tells me that there are a long list of updates to be done. This messages comes up once a week, and each time i click update, it then states it must restart to update. The computer then restarts, but at no point during this process does any in

  • Drag and drop in a tree

    Hello , I have a column tree (CL_GUI_COLUMN_TREE) and want to sort nodes within this tree by drag & drop. (Like in the favorites menu SAP Easy Access) Has anyone a sample report for this? thank you in advance. Werner

  • Cannot mount external drives

    Hi all! I have an 2010 imac i5 32GB RAM, running on 10.9.2. All of a sudden my machine does not mount ANY extrenal hard drive. It recognises them in Disk Utility, but they appear greyed and cannot be mounted. Not even disk repair. Last week though th