VIDEO FILTERS MISSING

When I try to open a project it appears the followin advise:
D:\Mis documentos\Adobe\Premiere Pro\3.0\UTN3.PPJ.prproj
Video Filter missing: AE.ADBE Motion
Video Filter missing: AE.ADBE Opacity
Video Filter missing: AE.ADBE ShadowHighlight
What can I do to fix it? I´ve already try reinstall the soft, but it happens again.
Thanks!

success, I just re installed (without deleting anything) and they are there, bit odd they weren't before, can't help wondering if anything else was missed, but there you go, a happy ending, thanks

Similar Messages

Why am i getting missing video filters ?

I recently purchased some final impact.net plugins pk 1 and 2, after messing around and reading their instructions, i got pk 1 to work and appear in premiere pro, pk 2 turns out i have to upgrade my card and thats fine. My problem is I have a lot of red giant effects , which are great and work brillantly, however in order to get final impacts effects to work they suggested i hold down shift while booting premiere to rebuild the plugin cache. After this final impact plugins worked and appeared but half my red giant stuff was gone. Now I am getting a zillion missing video filter errors:
Video Filter missing: AE.MB LookSuite3
Video Filter missing: AE.Magic Bullet MisFire Gate Weave
Video Filter missing: AE.Magic Bullet MisFire Splotches
Video Filter missing: AE.NWBL Psycho Strobe
on all my projects. Yet the plugins are in the media core folder ? If I open premiere 5.5 they are all there but if i open premiere 6 projects, which all my projects are now, i am getting missing filter errors everywhere ? Anyone have any ideas, I have tried numerous installs to no avail ? any ideas greatly appreciated as I am now turning into the hulk.

Hi Jim, have tried this repeatedly, including reinstalling everything, have even cleaned registry keys and other fragmented data using cc cleaner and still cannot get the parts of MB suite or Knoll light factory to come back online in premiere. Still getting these messages.
Video Filter missing: AE.ADBE MagicBulletMojo
Video Filter missing: AE.KNSW Custom Flare
Video Filter missing: AE.KNSW Custom Flare EZ
Video Filter missing: AE.MB LookSuite3
any ideas ?

Video Filter missing: AE.ADBE Numbers2

Video Filter missing: AE.ADBE Numbers2
I Get this when i open a prodject that was exported from after effects

Hi drumboy12,
Welcome to the Forums.
It seems that you have applied any effects and filter on a Video or a File in the After Effects composition and then you Exported it as a Premiere Pro Project and those filters or effects are not present in Premiere Pro. Please use Dynamic link to send your project to Premiere Pro if you wish to use Premiere Pro with After effects.
Regards,
Vinay

'Video Filter Missing' Exporting AE CS4 project into Premiere Pro CS4 project

Hey guys,
I am new to Premiere and AE, and I just made a short little intro for my current project in After Effects using a couple different effects and such. When I go to export my AE project and make it into a Premiere Project file it will not let me open the project properly, it says:
D:\Premiere Projects\AFC Title2.prproj
Video Filter missing: AE.ADBE Exposure2
Video Filter missing: AE.ADBE Glo2
Video Filter missing: AE.CC Particle World
How do I fix this? Can I get the video filters for Premiere so that it recognizes them?
Thanks,
Andrew

Are you planning on editing the material you're moving from AE to PPro? Not that you can't, but that's sort of a backwards workflow (ie. usually you edit in PPro, and then move the sequence to AE for effects, etc.). Or are you just trying to export from PPro?
Do you have the Production Premium bundle? If so, you could use Dynamic Link to put your AE comp into a PPro timeline, without having to worry about missing filters. You could also render from AE, and then import the rendered movie into PPro.
Finally, you can make (most of) the Cycore effects work in Premiere; this includes Particle World. Simply copy the AEX plugins from the After Effects program folder, into the Premiere Pro program folder (you'll have to dig into a couple of subfolders to find the effects). You'll then have access to most of them in Premiere Pro, though they don't all work the same in the PPro interface. The other two are, I believe, AE-only plugins, and are locked to that program--they won't work in PPro, no matter what.

Video Filter Missing.

When I attempt to import files from AE to Premier Pro CS5.5 error message appear saying Video Filter Missing. I reinstalled both AE and Premier Pro, but that did not fix the problem. Anyone know what is causing this and how I can fix it?
[Thread title shortened.]
Message was edited by: Jim Simon

Actually I am importing compositions via dynamic link. Everything worked fine yesterday, but for some reason today I am getting a box filled without about 7 messages relating to missing video filters. When this happens Premier freezes up and I have to go to the task manager to stop and the restart Premier. I have a screen print of the errors that come up if that helps.

Video filters not working when applied to sequence clips

I have looked through the forums and haven't found the solution to my problem. I am having problems with video filters on clips in the timeline. I have footage that needs color correction. In the viewer I created a 3 way filter for one clip, saved it, and applied to all clips in the browser. They all open corrected in the viewer. (I did this because i was reviewing the clips with my client).
When I put the clip in the timeline it does not indicate it needs a render, the filter does not appear on the clip, but when I double click and open the sequence clip in the viewer the color correction tab is there. I've removed attributes and tried again several times, both using the menu with the clip selected, and by doulbleclicking the clip into the viewer and apply the filter there. The tab is always there but the filter does not appear on the clip. It only appears when the process is done to clips from the browser inthe viewer. I've checked the RT for unlimted, I've done a render all video, I've checked settings under the render tab and filters is checked. I've gone into another project and have the same problem in a different project with different clips. I had a recent project where I used a blur effect and it worked fine. My video is DV and my sequence settings are DV NTSC.
I've run out of my ideas and comments from ither threads. What is my next troubleshoot? Should I delete preferecnes? I haven't done that with FCP, can I do it myself or use Rescue? Could that create other problems for me? Any other ideas?
I work in Afghanistan and have no resources here for any Mac support besides books and forums.
Thanks

Hey Catrina
Not sure what the issue is with your application of the 3-Way Color Corrector in the Browser. My guess, is that perhaps you only thought you applied the "saved" instance of the 3-way corrector but instead applied a default neutral instance of the corrector. How did you save the correction you applied to the other instances? A good method is, having applied and tweaked it as needed to a sample clip instance, you can drag a copy of it out of the clip's Filter tab and drop it directly into your Browser window. To check, then double click that Browser instance of the corrector to open it in the Viewer window and see if has the corrections settings as expected and no the default ones. If so, go ahead and drag it to another clip instance in the Browser and then drag that clip to your sequence ... has the correction "stuck" bow? But while we figure it out, for now, why not just apply the saved correction directly to the clips in the sequence? Regarding trashing your preferences ... download Preference Manager from Digital Rebellion. Very straightforward to use.
Cheers
Andy

Video filters screen setup

Hello All,
Help please...
I have tons of filters/plugins. When I open my video filters screen (from the effects window), I always have to arrange my window so that I can see the majority of the filters. Is there a way to have this setup when launching FCE HD so that I don't have to always re arrange my video filters window?
I have a custom setup that I am using with two monitors. Viewer, Canvas & Browser on one screen and Effects & timeline on my other monitor.

You can make custom window arrangements of course, but they won't leave contents of windows open as I think you'd like. Might I suggest that it's more efficient to access the filters from the Effects menu rather than from the bins in the Effects tab of the browser.

Mplayer doesn't play anything, could not initialize video filters

When trying to play a video, this is what I get. I've tried changing the video driver, same error
[max@gayforceone ~]$ mplayer capture.avi
MPlayer 1.0rc2-4.3.2 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (Family: 15, Model: 3, Stepping: 4)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
115 audio & 237 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing capture.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
Detected NON-INTERLEAVED AVI file format.
VIDEO: [MJPG] 800x600 24bpp 15.015 fps 11713.4 kbps (1429.9 kbyte/s)
Clip info:
Name:
Software: guvcview-0.9.5
Comments: Fri Nov 28 06:58:53 2008
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG decoder)
==========================================================================
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
AO: [oss] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 800 x 600 (preferred colorspace: Planar 422P)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar 422P as output csp (no 1)
Movie-Aspect is nan:1 - prescaling to correct movie aspect.
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 1 -> 1
SwScaler: reducing / aligning filtersize 9 -> 8
[swscaler @ 0x89d5f50]SwScaler: BICUBIC scaler, from yuv422p to yuv420p using MMX2
[swscaler @ 0x89d5f50]SwScaler: using 4-tap MMX scaler for horizontal luminance scaling
[swscaler @ 0x89d5f50]SwScaler: using 4-tap MMX scaler for horizontal chrominance scaling
[swscaler @ 0x89d5f50]SwScaler: using 1-tap MMX "scaler" for vertical scaling (YV12 like)
[swscaler @ 0x89d5f50]SwScaler: 800x600 -> 800x600
VO: invalid dimensions!
FATAL: Cannot initialize video driver.
VDec: vo config request - 800 x 600 (preferred colorspace: Planar 422P)
VDec: using Planar 422P as output csp (no 1)
Movie-Aspect is nan:1 - prescaling to correct movie aspect.
VO: invalid dimensions!
FATAL: Cannot initialize video driver.
FATAL: Could not initialize video filters (-vf) or video output (-vo).
Exiting... (End of file)

I've tried all the options in gmplayer, they all don't work. I'm assuming the command line carries out the same functions. I've tried a couple (but not all) and they didn't work either.

Video Filter missing: AE.keylight 906?

Hi,
I am a complete noob when it comes to editing video in Adobe. I've been looking for a solution to my problem in other places, but my attempts were futile.
Here's what I did:
I edited a video clip in Adobe After Effects, dealt with the green screen using Keylight, then exported my work as an Adobe Premiere Pro Project. Once that was done, I tried opening the project in Premiere and a window popped up saying "Video Filter missing: AE.keylight 906." I clicked OK and found that Premiere does not show my edited green screen. It merely shows the original - I think I'm right in saying that is because the video filter is missing, as the message stated. How do I fix this? Help please!
Thank you for your time.
MP

My guess for the choppiness would be that you used the default uncompressed render settings from After Effects; this likely made a very large file that, unless you have a really stout and fast hard drive setup (e.g. RAID), you will not get real time playback. Uncompressed is good in that, well, it's uncompressed and therefore doesn't add any further image degradation, but it can make for a lousy editing experience, as you've found.
Depending on what your source footage is (you didn't mention this originally), and what your intended destination/delivery format is, you might be able to use different render/export settings from After Effects for a more playable file in Premiere. Later, you could rerender the composition to the uncompressed version and replace the original; this will give you better performance for further editing in Premiere, and then later will give you higher quality output. This is often referred to as proxy editing, and there are a couple of ways you can go about this, if it's something you want to attempt.
Regarding the loss of edits when moving from Premiere: there shouldn't be any loss of edit points, necessarily, but what you might be thinking of is the loss of transitions. Since Premiere Pro works with tracks and After Effects works with layers, the two programs have different methods of representing and creating transitions (e.g. dissolves). In Premiere, you can put two clips next to each other in the sequence on a single track, and add a dissolve between them; however, in After Effects, a layer can only contain one footage item, so to create a transition between two layers, they must overlap. There are analogs for certain transitions--a dissolve, for example, is just a change in opacity of one layer that is over another--but other more "fancy" transitions must be recreated more manually. In short, you shouldn't have to worry about the timing of your edit in Premiere changing when moving to After Effects, whether you use Dynamic Link or whether you simply copy and paste from Premiere into AE.
Hope that helps a bit more. And Mr. Brougham is my dad's name

Half my video track missing after automatic transcode in Encore CS3

I'm using the automatic transcode option on a MS DV-AVI file about 2.5 hours long. After transcoding, half the video is missing from the timeline and the project size is less than 2 GB. I can revert the asset back to AVI, and then the video reappears. I've tried re-transcoding several times now, and keep getting the same result.

This is aimed a Premiere Pro, but may help - First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the 16 questions at the end of that link

Top half of video is missing on imported WMV files. Running CS3 & Win XP Professional

Top half of video is missing on imported .WMV files. I'm running CS3 Adobe Premier Pro with Win XP Professional OS
Hi all,
I just installed my Adobe Premier Pro CS3 for the very first time. I then IMPORTED a WMV file into the Project Frame and then Dragged & Dropped it into the Time Line. All the windows (or Frames) Project Frame, Source Frame and the mini-Project Frame show this video with the top half missing. I’m running Win XP Professional with the latest Service Packs installed.
Please Help.
Thanks
Derek

After Searching the net for a while here, I found a solution to the "Half Screen" problem!
The half screen video problems seen while trying to play WMV files in my CS3 Adobe Premiere Pro program seems to have been due to a recent Windows software Security update made to it’s Windows Media Player programming. As soon as I removed that update, my WMV files now show normally within Adobe Premier Pro.
If you wish to uninstall this Windows Patch / Security Update on Win XP Machines:
No#1 Prior to removing/un-installing the file, shut off "Windows Automatic Updates" and set update preferences to manual. Thus in the future you can select which Updates you want to instal (and which one not to instal) *remember to ignore the KB2834904 update in the future! That is at least until Widows fixes this Security Update / Patch.
A) Go to "Add/Remove Programs" in Control Panel
B) In the Add/Remove Programs, check the "Show Updates" box located at the top of that window
C) Scroll down to "Windows XP Software Updates" and within that section, scroll down to "Security Update for Windows Media Player" KB2834904 (mine was dated 7-10-2013)
D) Click on the REMOVE button and re-start your system.
If using Win 7 Operating System: to remove this Patch / Security Update the file to remove is: KB2803821 - In Windows 7, go to "Add/Remove Programs" in Control Panel, click on the "View installed updates" link in the left sidebar, search for KB 2803821 and click REMOVE.
Good luck everyone!
Derek

Video Filter missing: PR.ADBE Camera View

Hi, I get the following message when I load my premiere project:
Video Filter missing: PR.ADBE Camera View
I know its a filter on windows what is not on a mac because I transferd some files to my mac. I only want to know how do I get rid of this message.
Thanks

Yes, but it will be manual labour. Just go through all your clips and remove each instance where you have used it. Maybe it is shown in the timeline in a different color or with diagonal stripes through it, I don't know.

Video Filter Missing: AE

I keep getting a series of messages saying Video Filter Missing: AE.ADBE MagicBulletMojo as well as a string of various messages after "Video Filter Missing: AE...." I was wondering if the "AE" in that message meant that it was coming directly from a plugin within After Effects. I am trying to track down exactly why this is happening in my particular project if it was from something within After Effects or from Premiere.
I know that I have seen similar error messages with "Video Filter Missing: PR...." in other forums. So my biggest question is:
Does the AE or PR in the middle of the error correspond with the application that I was using the video filter in that is now missing?
Thanks!

Placed the afx cs4 Fast_Blur.plugin on /Applications/Adobe Premiere Pro CS4/Adobe Premiere Pro CS4.app/Contents/Frameworks/MediaCoreUI.framework/Fast_Blur.pluginand nothing... ignored as when placing it on Plug-Ins folder...
Where is this mediacore folder on win?
Thanks for the suggestion, but I think that the Mac CS4 afx "Fast_Blur.plugin" isn't comptible with the Mac CS4 Premiere.
I don't own a CS3 mac version... does anyone knows if it has the fast blur? I could try to use that file...

Video Filter missing: AE.ADBE AEMask

How can I fix this error: Video Filter missing: AE.ADBE AEMask ? I used so many of the CC 2014 effects with masks and now they are shown as offline.

Hi Bdrummer67,
Sorry that didnt work. At this point, you might want to start a case with support. Here's the link: Contact Customer Care
Please let us know the results.
Thanks,
Kevin

Video Filter missing: AE.ADBE FC PRO 2.1 Help me..

i got a problem. " Video Filter missing: AE.ADBE FC PRO 2.1 "
whenever i turn on premier pro, i see this sentence.
Please help me...
actually i tried to install film convert pro on my new computer but it doesn't work. I know FC PRO is film convert.
but it is installed on after effect. not premier pro..
can you help me ?
i'm desperate T_T

I removed FC plugin. and reinstalled. but it doesn't work.
actually i want to use FC plug in but it's not working on premier pro..
......i don't know why.. because it was working well on my last computer.

VIDEO FILTERS MISSING

Similar Messages

Maybe you are looking for