Video filters not working when applied to sequence clips

I have looked through the forums and haven't found the solution to my problem. I am having problems with video filters on clips in the timeline. I have footage that needs color correction. In the viewer I created a 3 way filter for one clip, saved it, and applied to all clips in the browser. They all open corrected in the viewer. (I did this because i was reviewing the clips with my client).
When I put the clip in the timeline it does not indicate it needs a render, the filter does not appear on the clip, but when I double click and open the sequence clip in the viewer the color correction tab is there. I've removed attributes and tried again several times, both using the menu with the clip selected, and by doulbleclicking the clip into the viewer and apply the filter there. The tab is always there but the filter does not appear on the clip. It only appears when the process is done to clips from the browser inthe viewer. I've checked the RT for unlimted, I've done a render all video, I've checked settings under the render tab and filters is checked. I've gone into another project and have the same problem in a different project with different clips. I had a recent project where I used a blur effect and it worked fine. My video is DV and my sequence settings are DV NTSC.
I've run out of my ideas and comments from ither threads. What is my next troubleshoot? Should I delete preferecnes? I haven't done that with FCP, can I do it myself or use Rescue? Could that create other problems for me? Any other ideas?
I work in Afghanistan and have no resources here for any Mac support besides books and forums. 
Thanks

Hey Catrina
Not sure what the issue is with your application of the 3-Way Color Corrector in the Browser. My guess, is that perhaps you only thought you applied the "saved" instance of the 3-way corrector but instead applied a default neutral instance of the corrector.  How did you save the correction you applied to the other instances?  A good method is, having applied and tweaked it as needed to a sample clip instance, you can drag a copy of it out of the clip's Filter tab and drop it directly into your Browser window.  To check, then double click that Browser instance of the corrector to open it in the Viewer window and see if has the corrections settings as expected and no the default ones. If so, go ahead and drag it to another clip instance in the Browser and then drag that clip to your sequence ... has the correction "stuck" bow? But while we figure it out, for now, why not just apply the saved correction directly to the clips in the sequence?  Regarding trashing your preferences ... download Preference Manager from Digital Rebellion.  Very straightforward to use.
Cheers
Andy

Similar Messages

  • Mocha tracking not working when applied to AE clip

    Thank you in advance for reading this.
    I'm a complete newbie to AE and, frankly, video editing in general. I'm trying to replace faces in a video with png pictures. I'm really not trying to go for the professional look and my skills wouldn't allow it if I was .
    I rendered my clip as sequenced jpgs in AE then added splines in mocha and inserted my pngs there to see how it looks. I am very happy with the results in Mocha. However, the tracking doesn't line up when exporting the data to my Clip in AE. If needed, I can upload my project somewhere to further illustrate my situation.
    I'm really enjoying this experiment with video editing (even though frustration has more then set in) and would like to improve my skills in time. Please help with my first few baby steps towards that goal!
    Thanks Again!

    Check this Martin Brennand's list to identify and solve your issue.
    Report back if you need some more help (please, give detailed explanation of what you are doing and what exactly is going wrong).

  • Video Filters not working.

    I'm using Final Cut Express 4.0.1 the Academic version. Whenever I apply a video filter to a clip, in any fashion, there is no effect. No change in the viewer or canvas. Even when exporting the filters do not show up in the final export. I know I am applying the filters correctly, I have gone through the exact same steps on a different computer and achieved positive results.
    I have tried trashing the preferences but there was no change.
    Any help would be greatly appreciated.
    Thanks

    Hey Tom,
    I add the filter the same way I've always done which has always worked in dozens of projects before:
    1. Put the cursor over the clip in the timeline so it shows in the viewer.
    2. Double-click the clip in the timeline and it opens in the canvas.
    3. Use the browser to locate the brightness filter, drag that brightness filter to the clip in the canvas (from step 1).
    4. Click the "Filters" tab in the canvas and adjust my settings and the changes are visible in the viewer and the video tab in the canvas.
    This process works fine in a new sequence, but will not work on the same clips in their existing/"bad" sequences. No process works to add a filter to a clip in one of the "bad" sequences. I can even:
    1. Use the browser to locate my original clip,
    2. double-click it there to open it in the canvas,
    3. add the brightness filter by locating the filter in the browser and dragging it to the canvas,
    4. adjust the brightness there which adjusts it in the video tab of that clip in the canvas,
    5. drag that clip down to the timeline in one of the "bad" sequences and - while the effects of the filter disappear (the brightness changes revert back as though the filter is not there) - double-clicking that newly-added clip in the timeline to open it in the canvas reveals that the filter is still on the clip, and the settings are kept, but there is simply no effect visible from it. Yeah, bizarre.
    6. Then I can copy that clip from the "bad" timeline which has the filter on it with no visible effects, create a new sequence and paste that clip into it, and bingo, the effect is visible.
    I can also double-click a clip from the timeline of a "bad" sequence so it opens in the canvas, add the effect but see no visible change in any view, then open a new sequence and drag the clip from the canvas into the new sequence and the effect is there visible.
    Can't explain that one, but that's what is happening.
    But the filters add just fine in the new sequence, using the exact same clips as copied from the "bad" sequences. I have no answer as to why this process does not work in my existing sequences but works just fine when I copy the clips to a new sequence. Maybe I screwed up my sequences somewhere during this project that I don't know what I did. But that's what's happening, and copying to a new sequence is the best workaround I have found and it's easy.
    I upgraded from 3.5.1 to 4.0.1 recently and this is the first project I've done since then and the first time I've noticed this problem. Not pointing to that as the source, but just providing info.

  • Exchange Impersonation not working when applied to group or OU

    I am trying to set up Exchange Impersonation so a specific account can impersonate a group of users. I have successfully set it up and tested to impersonate a single user but it will not work when I apply it to either a distribution group or OU, even though
    Exchange accepts my commands. The commands I'm using are;
    New-ManagementScope -Name ScopeName -RecipientRestrictionFilter { Displayname -eq "All Group Staff"} 
    New-ManagementRoleAssignment -ScopeName  AssignmentName -Role ApplicationImpersonation -User [email protected] -CustomRecipientWriteScope "ScopeName"
    When I try the above for a single user instead of group it works fine. I am using EWSEditor to test. The error I get on the group is;
    The account does not have permission to impersonate the requested user.
    Type: Microsoft.Exchange.WebServices.Data.ServiceResponseException
    Source: Microsoft.Exchange.WebServices
    ErrorCode: ErrorImpersonateUserDenied
    ErrorMessage: The account does not have permission to impersonate the requested user.
    Should I be using a different filter or parameter to get this working for a group of users? Please note I don't want to apply this to all users in the organization.

    Hi,
    Thanks for your response. It's great to hear the good news. What's more, if you have issue with Exchange impersonation, welcome to our Exchange Server Development forum, forum which is staffed by more experts specializing in this kind of problems. Your understanding
    will be appreciated.
    For your convenience:
    https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • Video filters not working anymore in FCE 3.5.1

    My video filters (i.e. color correction, levels, RGB balance) don't seem to be working anymore. The only things I've done lately are upgrade to 3.5.1 and also OS 10.4.8. I believe this problem started happening after the 10.4.8 upgrade.
    I've been working with video for some time, but am relatively new to FCE. My workflow was to doubleclick to open the filter, make the adjustments to the filter settings, then drag the filter to the clip on the timeline. This was working just fine but just doesn't work anymore.
    Other things such as transitions work fine. LiveType and Soundtrack also seem fine.
    Anyone else have this problem, and how did they correct it? I have a project due tomorrow afternoon and would like to be able to fix ASAP.
    Thx in advance.
    G5 dual, 23 Apple Cinema Display, 19" ViewSonic widescreen   Mac OS X (10.4.8)  

    Tom,
    First:
    I did trash my prefs, first thing. However, I might not have gone deep enough with this. I only trashed User > Library > Preferences > com.apple.FinalCutExpress.plist.
    I produce a 10-minute weekly announcements DVD and as such have very little downtime for my apps. The project I'm working on now is much more important, although only about 6 minutes, but it's crucial and I didn't want to risk downtime if I screwed up by trashing something else and possibly causing me more work. So I've had a feeling maybe more should have been trashed.
    Second:
    To better explain my incorrect workflow, I've created some movies you can find here:
    http://little-works.com/sepia_ex.html
    In this first example, I created an exaggerated color for a sepia tone, something I would never use. If you click the link and go on to the next page, you'll see where I apply that filter to the clip in the timeline (it's actually a still picture, not a video clip), and beside that, you'll see the unchanged result. BTW, I did render that still after I applied the green sepia filter.
    What happened when I first installed FCE was that any and all changes I made in this manner immediately presented themselves (in other words, they "worked"). Now I see no change at all.
    I burned a rough cut of this project yesterday and it looks fine, but I've worked as an art director for too many years and am very picky! I know it's fine for my audience but a) I know it could look better b) I want it to work right.
    I appreciate any and all help on this. I've been a Mac user for over 20 years, but am a newbie to FCE and am learning on the fly. So far my results have been great and very much appreciated by my audience(s), but I want to go much deeper into the program, as I am only touching the tip of the iceberg and don't want to develop bad habits from the get-go!
    Thx --
    G5 dual, 23 Apple Cinema Display   Mac OS X (10.4.8)  

  • .FLV Video will not work when linked to on intranet (Captivate 5)

    I have a project with video (.FLV).
    1. Project was developed and published to a folder on the local hard drive of a PC.
    2. Project was copied to my company's intranet server.
    3. If I click on "My computer" and navigate to the network folder where the project is, the project and video work fine.
    4. If I LINK to the project (say to send the location to someone in an Outlook message) the project WILL open, but the video will not (reads "Connection Error").
    I did add the video to the library of the project.  The video file is in the same folder as the published project.
    I have worked with support over the phone and wanted to try something different before calling back.  The solution they gave me was to zip the project.  I haven't tried that because it will not be practical for my small hospital.  My users will need to be able to click on something and make it work, they may not have admin rights to the pc or the knowledge/desire to unzip a file.
    Thanks for reading.

    I thought I'd add a few comments in addition to Rod's good suggestions. For the benefit of others who may follow this thread in the future where their .flv is stored on a web server or MS SharePoint. I'd suggest checking with the web server administrator to assure that the server accommodates the .flv "mime type". This is often the problem when you see the "Connection Error" statement.
    This Adobe Knowledge Base article gives details to fix it.
    http://kb2.adobe.com/cps/194/tn_19439.html
    This can also be the case if the .flv is being delivered from SharePoint.
    http://social.technet.microsoft.com/Forums/da-DK/sharepointcollaboration/thread/af003e0e-8 c87-47fe-91d3-47e36ffddec3
    Of course these might not be where your .flvs are stored, but just in case...
    Thanks
    John Daigle
    Adobe Certified RoboHelp and Captivate Instructor
    Evergreen, Colorado
    www.showmethedemo.com

  • Video does not work when I connect my Macbook to a TV using a thunderbolt to HDMI converter. Audio works fine.

    I've been trying to connect my macbook to an Insignia TV. The macbook recognizes the TV is connected and changes the display ratio accordingly, but it does so in a jittery way before landing on 1080i after some time.
    The audio works fine on the TV from the mac, but it's not picking up any video. When I go to System Preferences>Displays, I get two windows: one for the built-in display, one for the TV. I think this is why I'm not getting any video, but I don't know how to make it just so that the display is for the TV. The displays are mirrored, but I'm still not getting anything. Please help!

    Go into System Preferences, then Displays. There should be an option to click on the tv mirroring. Click it and see if it connects to the TV.

  • On my mini Ipad the video does not work when I want to film something what do i need to do or how can i resolve this issue?

    I would like to know How to fix this problem with my mini Ipad, camera works well when I take photos but if I try to use for video the screen does not respond. it only response to photo, so I can I fix this ?

    All iPads (except the first gen which doesn't have a camera) are capable of taking videos. What version of iOS do you have on your iPad ? With iOS 7 you slide the Video / Photo / Square options up/down so that the one that you want lines up with the yellow dot to their left - is that how you are trying to select Video ?

  • Video chat not working when it should

    Hi. First time poster here on apple.com. I'm having a problem with video chat. I currently have a Intel dual-core iMac. My brother has a Dell laptop. I've read the posts about him having to have AIM 5.9 to actually be able to video chat, but he does. When I accept or he accepts the invite, I don't see him. All I see is myself. I've already gone into security and allowed everything and it still won't work. The odd thing is, he can hear and see me and I can't hear or see him. Thanks for taking time to read my problem.

    "First, I'm not even sure what a "fifth generation" ipod is."
    Se this: http://docs.info.apple.com/article.html?artnum=61688
    "I have a new 80 gig ipod with a screen."
    You have a 5th gen iPod.
    Have you been through these?
    The Five Rs.

  • Apply default transitions not working when applied next to AE Compositions

    I'm kinda pulling my hair out with this. My default transition is Dip to Black, duration of 2 seconds, and centered at cut. When I select a bunch of clips in the timeline with After Effects compositions mixed in and apply the default transition, the transition around the AE Compositions is ALWAYS changed to 1 second, centered at start/end. And I have to manually go in there and change it to 2 seconds, centered at cut.
    Here's a video describing it:
    http://www.youtube.com/watch?v=FDsyXhE7Ohk
    Why does it do this, and how do I get it to stop?

    Your AE comps don't have handles.  There's no extra video there for the transition.

  • When Export ssrs Report to CSV file runtime filters not working

    The Runtime Filters not working when Export SSRS Report to CSV format

    Hi PatilPriti,
    As for my understanding, the filter worked fine when you preview the report,
    but it did not work when you export the report to CSV format. I tried to export the report to CSV file on my side, and the data was shown as expected. I guess the issue is due to the parameter or filter. please try to export to Excel format to test again
    and make sure you created the filter correctly. Please refer to the following
    blog about how to add a filter in SSRS:
    http://arcanecode.com/2010/07/12/adding-filter-parameters-to-sql-server-2008-reporting-services-reports/
    If the problem is not resolved, i would appreciate it if you could give us
    detailed description of your problem.
    It’s better to provide the table structure and some sample data, it will help us move more quickly toward a solution.
    Thanks, 
    Wendy Fu

  • TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

    I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
    I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • I have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....

    i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....

    If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
    You know it is disabled if there is no padlock in the middle of the icon.

  • Links not working when I export to HTML or PDF

    I am a longtime Mac fanatic, but new to using Keynote. I am creating lectures for a class I teach where the computer in the classroom is Windows, so I have to export my Keynotes to another format.
    First I tried exporting to Powerpoint. That was a disaster. Since, I've tried exporting to HTML, exporting to PDF, and print -> Save as PDF (to get a PDF that prints nicely).
    My problem? Hyperlinks within my Keynote work fine when I play the presentation in Keynote. They also work when I export to PDF. However, they do not work when I generate the printable PDF OR when I export to HTML.
    I guess I understand them not working in the printable PDF, but not the HTML. Am I doing something wrong?
    Ideally I would like to export one PDF that I could use up on the projecter (with links working) and that students could view and/or print from their computers.
    Should I really have to have 2 PDF's - one for students who want to view it on screen with working links and one for people that want to print it out?!?!
    TIA for any help/advice!

    Do you have any filters applied to your clips?
    This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
    I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
    Anywho, export again, this time with "self contained" movie selected.
    Then try to import to Compressor.

  • Video Filter Not Working

    So I finally got Final Cut Express, and had a little bit of experience using it back in college. But now I'm having issues. I can't get any of the video filters to work, the filter I'm most concerned with is the Color Corrector. I really wanted to use this tool for a film I'm putting together. But no matter how I try to add this filter and others to my film, they don't take affect. I've seen tutorials all over the place that show the effects in real time in the viewer as the changes were made... I'm not getting that, **** I'm not even getting the effects to work at all???? Is it a settings thing? Or maybe a video file type?
    Any suggestions would be wildly appreciated.

    I had this confusion a few years ago when I was first learning Final Cut Express. I was not first selecting the clip that I wanted a filter to operate on, before fooling with the filters. The filters don't work if you don't highlight (select) a clip first.
    In other words: STEP ONE: DOUBLE CLICK ON THE CLIP that you want to apply filters to--that lets FCE know which clip you want to make the changes to. When you double-click on the clip, it appears in the Viewer window. THEN when you choose a filter, that filter will appear in the tabs of the Viewer window. Rip the Filters tab off (i.e. put the cursor on the tab, hold down the mouse button, and drag the tab off) of the Viewer window to form an independent window with it, if you want to, and move this Filters window off to the side somewhere and tweak the filter on it, so you can watch the effect on the video in the Viewer.
    Just putting the playhead over a clip and then trying to apply filters to that clip is like making changes to text in a word processor without first highlighting the text that you want to change. Nothing will happen without first highlighting some text, or in the case of FCE, nothing will happen to the video without first highlighting (selecting) a clip.
    Your trouble may be as simple as that.

Maybe you are looking for