Video filters screen setup

Hello All,
Help please...
I have tons of filters/plugins. When I open my video filters screen (from the effects window), I always have to arrange my window so that I can see the majority of the filters. Is there a way to have this setup when launching FCE HD so that I don't have to always re arrange my video filters window?
I have a custom setup that I am using with two monitors. Viewer, Canvas & Browser on one screen and Effects & timeline on my other monitor.

You can make custom window arrangements of course, but they won't leave contents of windows open as I think you'd like. Might I suggest that it's more efficient to access the filters from the Effects menu rather than from the bins in the Effects tab of the browser.

Similar Messages

OS Crashes with 2 monitors while watching video full screen... ?

Hello Forum
I just recently attached a second monitor to my Mac Pro (early 2009). I have only one video card. My setup is as follows:
- miniDVI > 1920x1080 monitor
- DVI > 1280x1024 monitor (connected through a DVI to VGA adaptor.. it's an old monitor...)
The computer now crashes pretty regularly at least once a day. I notice that it always seems to crash when I watch netflix videos full screen on the 1920x1080 montior.
Also I notice that the 3rd and the 4th slot of the RAM seems to have also pretty consistently ECC Errors... (I have 8 gigs of RAM) I don't know if that's normal? Are these two issues related? Also is there a way to fix /resolve the ECC errors other than just restarting the machine?
Any insight would be much appreciated.
Thank you
Regards
sk

I have reinstalled the whole OS and am now running only Firefox, FCP, Adobe After Effects and Adobe Photoshop.
I have switched back to the original Apple RAM (3 gigs) and use only one monitor. I have one Timemachine attached through firewire 800.
It seemed to be going ok for 1 day and on the second day I get the same deadly greyed out screen that tells me to restart the computer.
The strange thing it really crashes when I hardly use anything ram intensive, reading my email for example, or watching netflix videos. I can't seem to find a pattern.
When restarting I get the following error message:
(any idea where the issue lies?) Any insight much appreciated.
Thank you for your time.
Regards
sk
Sat Jul 4 20:12:52 2009
Machine-check capabilities (cpu 5) 0x0000000000001c09:
family: 6 model: 26 stepping: 5 microcode: 15
Intel(R) Xeon(R) CPU W3520 @ 2.67GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0x0000000000000800 invalid
IA32MC1STATUS(0x405): 0x0000000000000800 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0x0000000000000000 invalid
IA32MC4STATUS(0x411): 0x0000000000000000 invalid
IA32MC5STATUS(0x415): 0x0000000000000000 invalid
IA32MC6STATUS(0x419): 0x0000000000000000 invalid
IA32MC7STATUS(0x41d): 0x0000000000000000 invalid
Package 0 logged:
IA32MC8STATUS(0x421): 0xfe13cd400001009f valid
Channel number: 15 (unknown)
Memory Operation: read
Machine-specific error: Read ECC
CORERRCNT: 7786
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
Error overflow
IA32MC8ADDR(0x422): 0x0000000009fc1dc0
IA32MC8MISC(0x423): 0x1e2695d500080180
DIMM: 0
Channel: 2
Syndrome: 0x1e2695d5
panic(cpu 0 caller 0x001A9A3E): Machine Check at 0x00a548a8, thread:0x7453f20, trapno:0x12, err:0x0, registers:
CR0: 0x80010033, CR2: 0x1868b75c, CR3: 0x01409000, CR4: 0x00000668
EAX: 0x00000000, EBX: 0xccf24c2d, ECX: 0x00000008, EDX: 0x3c756200
ESP: 0x4b73fa48, EBP: 0x4b73fa48, ESI: 0x000001c7, EDI: 0x060ca700
EFL: 0x00000046, EIP: 0x00a548a8
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x4f2e28 : 0x12b4c3 (0x45d7fc 0x4f2e5c 0x133542 0x0)
0x4f2e78 : 0x1a9a3e (0x467558 0xa548a8 0x7453f20 0x12)
0x4f2f58 : 0x1a15c3 (0x4f2f70 0x0 0x0 0x0)
0x4b73fa48 : 0xa4a522 (0x60ca700 0x1c7 0x4b73fa78 0x1a8aaf)
0x4b73fa78 : 0xa4b36c (0xccf1c5f7 0x800001c7 0x0 0x0)
0x4b73fb68 : 0xa4c2e1 (0xccf1c5f7 0x800001c7 0x0 0x0)
0x4b73fc38 : 0x1ab31e (0xffffffff 0x7fffffff 0x0 0x5430c0)
0x4b73fc58 : 0x135867 (0x543580 0xccf1c3cc 0x1c7 0x54356c)
0x4b73fca8 : 0x13619d (0x1 0x7453f20 0x5ffdc7c 0x136faa)
0x4b73fd18 : 0x136e02 (0x7453f3c 0x4f716c 0x0 0x0)
0x4b73fd58 : 0x136ea6 (0x383dd1 0x0 0x0 0x0)
0x4b73fd78 : 0x3841a2 (0x383dd1 0x7453f3c 0x4b73fdd8 0x141442)
0x4b73fdd8 : 0x3912b5 (0x0 0x0 0x391523 0x0)
0x4b73fed8 : 0x391ae8 (0x0 0x1 0x7307a30 0x0)
0x4b73ff78 : 0x3e19ff (0x6ac482c 0x73079c0 0x7307a04 0xb0102998)
0x4b73ffc8 : 0x1a0c6a (0x7467f40 0x0 0x10 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(71.0.0)@0xa49000->0xa66fff
BSD process name corresponding to current thread: firefox-bin
Mac OS version:
9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate. When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet) in full screen mode just fine. When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing. I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse. Does anybody have an answer or a work-around for me?

Hi Watch this video,
If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

I accidentally washed my 6th generation iPod nano. It will turn on still but now it has a computer screen setup on the screen, is there a way I can get it back to normal?

I accidentally washed my 6th generation iPod nano. It will turn on still but now it has a computer screen setup on the screen, is there a way I can get it back to normal? I can plug it into my computer and it works and I've click the restore button that comes under the nano's summary when it's plugged in. Any type of help would be greatly appreciated. Thank you!

Take your iPod Nano back to the Apple Store. Let them see what you are seeing. Only this time............
Prior to leaving the Apple Store: ***Make sure you have the store staff power the iPod Nano up and demonstrate that it is indeed working properly to your satisfaction.***

With ios 7.03 I cannot expand youtube videos to screen size but get white blanks all around the stream

since the update to ios 7.0.3 I cannot expand Youtube videos to screen size - instead, the features around the video dissappear and are replaced by white fields. With my ipad mini I do not have that problem.
Does anybody know advice?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

How to avoid pop up appearing in the screen middle top when playing video full-screen ?

I created a landing page with embedded video hosted on Vimeo. When I click to play the video full-screen there's always a pop up window in the middle top saying the meaning like Vimeo is playing full-screen, press escape to get out of it. I don't want that pop up from appearing, I am wondering if any code I can put on the embedded video to prevent the pop up ? Thank you very much.

No, as a web developer, you can't tamper with that message. The point is to prevent a situation where the user is trapped in full screen, as would happen if full screen is initiated by the page and the page doesn't provide controls to exit full screen.
If users trust the site in question, they can check the "Never ask me again for this domain" checkbox to avoid the message in the future.
Users can also get rid of all such messages altogether:
# Install Stylish and restart Firefox when prompted.
#* https://addons.mozilla.org/firefox/addon/stylish/
# Click the Stylish icon on the navigation toolbar and choose Write New Style, then Blank style.
# Paste the following in the text box, give the style a name, then click the Save button.
<pre><nowiki>
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#fullscr-toggler,
#full-screen-warning-container {
display: none !important
</nowiki></pre>
If you don't want to install an add-on, you can use the ''userChrome.css'' file instead, but I don't recommend it. In that file, the first line of the style should only appear once at the top.
* http://kb.mozillazine.org/UserChrome.css

Video filters not working when applied to sequence clips

I have looked through the forums and haven't found the solution to my problem. I am having problems with video filters on clips in the timeline. I have footage that needs color correction. In the viewer I created a 3 way filter for one clip, saved it, and applied to all clips in the browser. They all open corrected in the viewer. (I did this because i was reviewing the clips with my client).
When I put the clip in the timeline it does not indicate it needs a render, the filter does not appear on the clip, but when I double click and open the sequence clip in the viewer the color correction tab is there. I've removed attributes and tried again several times, both using the menu with the clip selected, and by doulbleclicking the clip into the viewer and apply the filter there. The tab is always there but the filter does not appear on the clip. It only appears when the process is done to clips from the browser inthe viewer. I've checked the RT for unlimted, I've done a render all video, I've checked settings under the render tab and filters is checked. I've gone into another project and have the same problem in a different project with different clips. I had a recent project where I used a blur effect and it worked fine. My video is DV and my sequence settings are DV NTSC.
I've run out of my ideas and comments from ither threads. What is my next troubleshoot? Should I delete preferecnes? I haven't done that with FCP, can I do it myself or use Rescue? Could that create other problems for me? Any other ideas?
I work in Afghanistan and have no resources here for any Mac support besides books and forums.
Thanks

Hey Catrina
Not sure what the issue is with your application of the 3-Way Color Corrector in the Browser. My guess, is that perhaps you only thought you applied the "saved" instance of the 3-way corrector but instead applied a default neutral instance of the corrector. How did you save the correction you applied to the other instances? A good method is, having applied and tweaked it as needed to a sample clip instance, you can drag a copy of it out of the clip's Filter tab and drop it directly into your Browser window. To check, then double click that Browser instance of the corrector to open it in the Viewer window and see if has the corrections settings as expected and no the default ones. If so, go ahead and drag it to another clip instance in the Browser and then drag that clip to your sequence ... has the correction "stuck" bow? But while we figure it out, for now, why not just apply the saved correction directly to the clips in the sequence? Regarding trashing your preferences ... download Preference Manager from Digital Rebellion. Very straightforward to use.
Cheers
Andy

X crashes on startup with AMD dual screen setup

Ever since I bought my AMD Kaveri A10-7850K at the end of January last year I've been having trouble getting a dual screen setup to work properly. Initially I put this down to poor beta drivers, and as I had far too much going on to investigate the issue further beyond some fiddling with xorg.conf, I bought an AMD A4-4000 as a temporary solution while waiting for the Catalyst drivers to catch up.
In June last year I decided to give my A10-7850K another go, assuming that the Catalyst driver would have matured enough in the meantime to cater for the Kaveri processors. Unfortunately the situation was still the same, and I I didn't have the time nor want to be swapping processors all constantly to I decided to just give up on a dual monitor setup for the time being.
After many years of using two screens, however, it is very hard to get used to a single monitor again, and as January is a quiet month for me I decided today to have another at getting it to work properly.
My setup is as follows:
an LG LG 23EA63V connected via HDMI as my main monitor at 1920x1080
a Viewsonic VP-171b connected via DVI as my secondary monitor at 1280x1024
AMD A10-7850K APU
Catalyst 14.12-1 drivers installed from Vi0l0's repo
Xorg 1.15 installed from Vi0l0's repo
KDE 4.14.3 using kwin
KDM is launched using kdm.service
KMS disabled via nomodeset
fglrx module loaded on boot via cat /etc/modules-load.d/catalyst.conf
Tear free rendering enabled
After plugging in my secondary monitor configuring it in amdcccle to be to the right of my primary moniotor in multi-display desktop mode, everything works correctly. This even works in my preferred setup where the secondary monitor is rotated into portrait mode, although I currently have not configured rotation so as to not overcomplicate the troubleshooting.
Upon rebooting, however, X hangs with a static white cursor in the top left hand of both screens, which after a while disappears completely. I then have to unplug the secondary (DVI) monitor and hard reset the PC before I can boot into my desktop again. The bizarre thing is though that when I plug in my secondary monitor again and configure it as desired, either through amdcccle or krandr, everything works perfectly again.
This is, of course, an incredibly cumbersome way of working, especially when most of the time I forget to disconnect my DVI monitor prior to turning on my PC, hence me just making do with a single monitor for the past 7 months.
I did a complete fresh install of Catalyst yesterday (uninstall drivers, delete remaining config files, reinstall drivers from repo), to no avail.
Output from xrandr after rebooting with the secondary monitor disconnected:
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DFP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00*+ 50.00 59.94 60.00 50.00 59.94
1776x1000 50.00 59.94 50.00 59.94
1680x1050 50.00 59.95
1400x1050 50.00 59.98
1600x900 50.00 60.00
1280x1024 50.00 60.02
1440x900 50.00 59.89
1280x960 50.00 60.02
1280x800 50.00 59.81
1152x864 50.00 59.96
1280x768 50.00 59.81
1280x720 60.00 50.00 59.94
1024x768 50.00 60.00
1152x648 50.00 59.94
800x600 50.00 60.32
720x480 50.00 60.00 59.94
640x480 50.00 60.00 59.94
DFP2 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)
Output from xrandr after reconnecting the secondary monitor:
$ xrandr
Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 16384 x 16384
DFP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00*+ 50.00 59.94 60.00 50.00 59.94
1776x1000 50.00 59.94 50.00 59.94
1680x1050 50.00 59.95
1400x1050 50.00 59.98
1600x900 50.00 60.00
1280x1024 50.00 60.02
1440x900 50.00 59.89
1280x960 50.00 60.02
1280x800 50.00 59.81
1152x864 50.00 59.96
1280x768 50.00 59.81
1280x720 60.00 50.00 59.94
1024x768 50.00 60.00
1152x648 50.00 59.94
800x600 50.00 60.32
720x480 50.00 60.00 59.94
640x480 50.00 60.00 59.94
DFP2 connected 1280x1024+1920+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02
1280x960 75.02 60.02
1152x864 75.00 60.02
1280x768 75.02 60.02
1280x720 75.02 60.02
1024x768 85.00 75.03 70.07 60.00
800x600 85.06 72.19 75.00 60.32 56.25
640x480 85.01 75.00 72.81 66.61 59.94
CRT1 disconnected (normal left inverted right x axis y axis)
my xorg.conf file:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1280x1024"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP2" "0-DFP2"
BusID "PCI:0:1:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
BusID "PCI:0:1:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3200 3200
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
My Xorg.0.log:
http://pastebin.com/ki5A0T7R
I'm quite desperate to get this working, almost a year after buying my new setup, so any pointers are welcome!
Thanks in advance!

Actually of the above listed commands only xclock is in xorg-apps .
pacman -S xorg-apps xorg-twm xterm
is needed.

T420s + 2 monitor + integrated screen setup. How make it work?

Hi All.
I'm trying to make my T420s with integrated grahpics only work in a 3 screen setup. Im using no docking station but the configuration is said to be supported. But the software simply switches of one monitor when i activate the other and vise versa. The Intel grahpics and media software doesnt seem to even support a 3 screen configuration.
Anyone knows how to make it work?
regards from sweden.

OK. Just to get things clear since I always thought that the T420s with Intel integrated grahpics only would be able to drive 3 simultanious screens with one beeing the internal screen, while the T420s with Optimus is able to drive 4 if used with a docking station.
But apparently, the Intel integrated only version seems to be able to drive only two simultaneous screens, while the Optimus version is able to drive 3 without a dock and 4 with a dock. Correct?

. When I go into facebook and try to watch a video , the screen turns green.

I have a HP 23 P114 all in one computer. When I go into facebook and try to watch a video , the screen turns green. How can I correct this? It comes with Adobe 17?
What can I do to correct this.

Hey @billnaboo ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with the Video not working correctly or green. Try clicking on the green screen, in the tab named Local Storage and put 10 KB and the green screen should disappear.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating as the graphic driver could need updating.
Have you tried another browser? This link will help you update your browser if needed.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

When I try to play a video(any video)the screen turns green and then shows a distorted picture

When I try to play a video(any video)the screen turns green &plays a very distorted picture picture.

What is your operating system? If Windows, see http://forums.adobe.com/thread/945765

When I watch any kind of video the screen turns green, what should I do?

When ever I watch a video of one I video taped or one on YouTube or a music video the screen turns green. How can I stop my iPhone from doing this?

Most YouTube content requires Flash. Apple does not support Flash for iOS devices.
Try using the pre installed YouTube app.

When playing videos the screen turns green and you see pixels

I'm have a problem playing video the screen goes green

hello StanleyRoper, please follow the troubleshooting steps described at [[Firefox opens with a transparent or blank window]]. if this resolves the issue, it would also be interesting which extension caused the issue in your case. thank you!

Audio No Video, Black Screen

Hey, I have some videos on my Ipod that I converted with Videora..
My Ipod plays the audio, but no video, the screen is black, and I DID check the tv out in the video settings.
I've read other posts like this, and nothing said there helps.
If anyone has any answers or suggestions please write back

I was having problems when I opened previous emails with WMV attached. No attachment was in the email body, except an audio file, no video. These emails were all fine until I upgraded to 7.5.5 two days ago. They would also transfer /open fine on my other Macs that weren't upgraded, when forwarded.
After much conversation with Apple, I did an OS re-install (not clean install) with archives and the problems are no longer there. ie NO 7.5.5 now and NO ISSUES!
Cheers

What program would allow me to create a mini box of video on screen?

Hi everyone,
I'm having trouble figuring out what program would allow me to use an effect that would create a small box of video on screen while the rest of the screen remains blank. It'd be great if there was actually a term for this, but if there is, I don't know it. I once used this effect in a silly beginner program called "studio" that allowed me to create one or more small boxes of video footage, smaller than fullscreen. I don't think this effect exists on imovie, but I have final cut pro, if anyone knows what the effect is called and how I could use it.
Please note: I'm not looking to create those four square boxes of the same image on screen (as can be found in imovie effects), I'm looking to choose the number of boxes I want and what goes in each one (i.e. different footage inside each box).
Sorry if this post is unclear, it's hard to describe when I don't know the name for it, but I hope you can help!

To scale down the video as videodude suggested, load the clip into the Viewer window, click on the Motion tab, and use the Scale control to resize the clip and the Center control to set it's position.
Or set the Canvas window in Image+Wireframe mode and use the mouse to resize and position the clip.
-DH

Video filters screen setup

Similar Messages

Maybe you are looking for