Video flickering on time line

When i play the video on premiere pro cs3 timeline the video starts flickering but when i play the original captured file that is playing proper can please help me with this.
My sys config is here
windows 7
$gig ram
i3 processor
using adobe cs3

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0

Similar Messages

How do I get the full size of my pics or video into the time line?

Greetings,
I've nener been part of a forum before and an wondering if this will actually be taken seriously. I'm new to video editing and know little about the program I am using (Adobe Premiere Pro CC). Would someone please advise me as to how I can add the full size video or pics to the time line. It appears whenever I add something from my Gopro 3 HD camera I only get a partial of the video / pic.
Regards,
The Powered Parachute Guy

Click the NEW ITEM link on reply page #5 in the PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
Also read below...
Some of this is from the Premiere Elements forum, but the idea of sizing pictures is the same for PPro or Encore
Pictures that are "overly" large may cause video editing problems
Photo Scaling for Video http://forums.adobe.com/thread/450798
-HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
-PPro Crash http://forums.adobe.com/thread/879967

Adding audio and/or video without altering time line...

I currently have a completed i-movie project of which I wanted to add some "stuff" at the begining of the presentation and actually at one point in the middle. I want to "insert" this audio and a few slides without altering the rest of the project. Am I am to anchor points so that what ever I do around those points does not affect the timing of what is already there?
Thanks in advance all.
JCole

Hi
First your server does not require javascript only your browser, (standard in all modern browsers).
You also do not necessarily require the flash program, (your browser will require a plug-in for the audio video to play).
You will require some form of video/media encoding software to convert your files to the required format though, (do a search using your preferred search engine for video encoder), then use dreamweavers insert file option to insert your audio/video file into your html
PZ
www.pziecina.com

In elements 10 my video tracks on the time line appear blank

trying to sync the audio and video but the tracks do not show anything. i;'ve had this problem before months ago and i started a new session and the problem was resolved. not this time. i started a whole new session and it did the same thing. i can't see the video tracks in time line...i've messed with the stuff to the left and nothing works. where it says "shows how video will be displayed".... doesn't work. how do i get my tracks back visually?

sadworld4804
Please remind me, in your present project, are you ripping VOBs from a DVD-VIDEO format on a DVD disc? If so, how are you doing that? If not, what are the properties of the source media that you are importing into this project?
And, could you also verify the situation so that I am not taking anything for granted....
In spite of the fact that you cannot see your video at the Timeline level, can you still see it in the Edit Mode monitor when you move the mouse cursor from left to right across the Timeline?
If this issue is just confined to the Timeline displays, could you post a screenshot of what you are looking at when this situation exists?
At any time have you tried deleting the Premiere Elements 10 settings file? I had a problem with Premiere Elements 12 yesterday. When I went to preview a disc menu in the Preview of the disc menu area, there was no main menu page displayed in the project. I tried in a new project and got the same. Deleting the Premiere Elements 12 settings file resolved the issue. The settings file deletion continues to be one of the best tools for getting at issues that defy resolution by other means.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
10.0
and in the 10.0 Folder is the Adobe Premiere Elements Prefs file that you delete. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete.
At this point, I am not sure if the issue is related to a matter that is not revealing itself in the questions and answers. That is one reason a screenshot might help to pick up on a detail that is being missed.
Please review and then let us know the outcome.
Thank you.
ATR

Viewing more than one video at a time

Here is my example...
...I have a scene recorded with three cameras, now if i click on each video on the time-line, a new viewer will open and i can watch that video, now i can have a viewer open for each video, but only one will play at a time, is there a way to allow all viewers to play sequentially while i move and work along the timeline of the sequence that i am working on?...
...thanks for your help...Darwin

Hi Darwin
Yes best tool is FinalCut Pro and it's MultiCamera function.
But one can do it in a fairly easy way in FinalCut Express
• Drop Camera one clip into video track 1
• Camera two => V-track 2
• Camera three => V-track 3
Double click on the clip in track 1.
Now You see it in Viewer
Turn on Image + Wireframe (above the picture in viewer window)
Now shrink it to take up a Quater and move it up to the left hand corner
Repeat with track 2 and three but move them into a free corner
Now when You play TimeLine You see all three videos playing in concordance.
Now You have to move them so that they sync. I use a photo flash during recording
to get one white frame on all cameras
Then to the edit.
Turn on Toggle Clips Overlays [alt+W] - this turns on the transparicy line in each
videoclip and audio level on those
I use the transparicy line and the Pen tool to increase transparacy to 100% on the
part of a clip I want visibly and drag down the other two to 0%
When I've done this trough out the full TimeLine
• I go into each Video track and restore size to 100% and that they fill window
Now playback and see if You are satisfied.
Still - You now have to figure out on which Audio that works best.
Good Luck
BUT in FinalCut Pro this is very much more better and most of all time saving.
Yours Bengt W

How to make the opening video replay every time in ibooks author?

I have opening media in my ibook. But I need it to replay every time the ibooks is opened again. How do I do this? Any help would be appreciated.

Are you saying export my processed video to .movs or DNxHD and give to him? The terms are all new to me. When I last edited with FCP it was with DVCam footage captured from the cassettes. Would he be able to then import the audio from the SxS card and sync it on his time line with those kind of files?
Nothing was deleted....straight 1 hr 2 minute single take.... broken down to the smaller files both by the Nanoflash and the SxS card.. I would drop the soundtrack from SxS onto my time line and sync it up for him first with the noise processed Nano video files if I could figure out why it isn't following the video onto the time line? Why does the 1080 60P codec from the Sony NEX 5N still camera bring the audio along automatically and the file fromn the Sony PMW 320 does not? There must be a lot of EX1 and EX3 shooters here. Please, what do I need to do with the buttons or targeting or settings for the 2 audio tracks on time line for those files to have the audio come along? From the SxS files I imported, both the ones that say "CLPR" and right below that, "CUEUP.XML" play the sound in the browser source window.

Time Line Marker Not Moving in Playback

New to Premiere Elements 10
After I put video clips on time line then edit the clips adding titles and transitions the time line marker won't move when I play back video clips.
Video monitor shows video playing but red time lime marker is not moving on time line.
I know I clicked on the wrong button somewhere but I don't know where to look.
The Help has a lot of info about the the Time Line but I can't find anything about its movment.

Hi, Golferaliday. Premiere Elements has its own forum, which is here:
http://forums.adobe.com/community/premiere_elements
and you'll usually get better, faster answers to PRE questions if you ask the video mavens over there. Good luck!

Adding Marker to the time line

I want to add markers to the entire video on the time line but i have alot of scenes over 100 i want to mark the scenes at the begaining
can this be done with out doing this one at a time
is there a add on like vegas pro are can i do it in cs5 or encore

Thanks i'm new to premiere pro but i order suite 5 just hope i will do the thinks i want
it will be here this week i hope . But looks good so far.
If there's any other add ons you thing will make my life easier.
Would love to hear from you.
Thx again Skully

We have adobe premiere elements 10 and my picture is frozen on my time line. went i push play the image froze but sound play......what can i do

the video on my time line froze . he do not play only sound .

andrep
What computer operating system and what video card/graphics card does that computer use?
There is a known problem with Premiere Elements 10/NVIDIA Ge Force which is resolved by rolling back the driver
version to May 2013. Let us determine first if that applies to your situation.
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
If not, then we can move to other troubleshooting possibilities including properties of your source media, do you
have the latest version of QuickTime installed on your computer, and other.
Thank you.
ATR

Flickering Grey / White lines across browser when video/animation is being played

Hi,
For a while now i've been getting these flickering grey/white lines across my browser, usually only noticeable when a flash animation, video or embedded advert is being played on the page. I only ever seemed to notice it happening when using Google Chrome, and a few tips suggested disabling one of the Adobe flash plugins on chrome. This seemed to fix the issue, until recently it came back again.
I decided to try and reinstall Chrome, which is when i noticed the issue happening in Safari too, which made me believe that it wasn't a browser problem but my Mac itself.
The lines seem to appear quite intermittently and only when a video or animation is being played.
Another thing i should mention is that i've not yet noticed this happening when watching video directly from my hard drive, it only ever seems to happen when i'm streaming online e.g. youtube, netflix etc But with the likes of netflix, it stops happening when i'm in full screen?
I'm currently using a Macbook Pro Mid 2010, OS X Mavericks 10.9.3. I also had the Logic Board replaced under a year ago due to other issues.
I also use dual monitors, My macbook pro and a Dell 27" IPS monitor. The flickering lines appear on both monitors, so it shouldn't be a display issue.
Below is a link to a video of the issue i'm having whilst i was visiting youtube:
http://youtu.be/En9zFT1HQ6I
Any suggestions to fix this would be appreciated,
Thanks,
Marie

I have also been having this problem. I recently bought a new iMac to relieve this aging computer, and kept this guy as a backup. I wiped the computer and installed Mavericks, and this problem keeps coming up. I have almost nothing on this computer... which is why I have no idea why it's having issues. The extended hardware test also shows nothing. Also tried resetting PRAM/SMC, which seems to make it go away for a little while.
Before I reset and upgraded to Mavericks, I was having another weird graphics issue where things would fragment and freeze either momentarily or permanently until I restarted. This mostly happened while I was using Skype. I brought it into the Apple Store several times but they apparently could never re-create the problem... I have a feeling these are related. I'm afraid the graphics card is failing and of course the warranty has run out.

Multiple use of the same video time line for different audio tracks

I have a 90 minute video timeline
I will be putting different audio tracks in multiple languages.
But as i was just editing i wondered if i could use only a segment (30 minutes ) of the timeline
along with a 30 minute audio.
Example:
So the first thing on the menu will be the whole 90 minute video
with a 90 minute music track
Second thing might be the 90 minute video with a 90 minute commentary
Third thing might be the first 30 minutes of video with a different commentary
Forth thing on the menu might be the first 30 minutes of video and 30 minutes of
a different language
Etc.
I realize i will need to make space (mb) for all the audio.....but if i could use the same video or pieces of it
that would be fantastic.
If i can do this i am presuming i should use playlists and chapter playlists to get it done?
I have never done this before and would love some feedback on an over view or tips
that might save me some guess work
Thanks for any help :-)
Soshman

Soshman wrote:
Hey Stan!
Thanks for your help...i think i am really getting this. And have learned a lot.
I had to go back to my computer programming and flowcharting skills to figure out the flow :-)
And i still have 153mb to spare when i build it.
I ended up lining up all the different videos and audios exactly for each time line except for 1 timeline.
Question: I know if the audio is shorter it will be ok.... but if the audio is longer than the video on a timeline ( and its the audio i assigned it by specify link )
Will the DVD keep playing until the audio is done or end when the video is done playing?
2nd Question: I am previewing the playlists with the "Preview from Here" feature
I specify the link and chapter within that timeline ( it is the only timeline with more than one chaper....the one with the longer audio than video from the question above )
For most of the audios i only need video chapter 1.....the preview here plays it ok but if i hit the skip to next (in the preview button on theright of the play button)...it goes to the next chapter #2... instead of the next timeline chapter 1 like it is programed to do from the playlist.
I am wondering if this is just fluke in the preview feature...or will it do that on the actual DVD as well?
Lastly because i am using different timelines. I am wondering if there are delays between playlists? for example...i have a long audio that continues between three timelines...i have spliced it pretty fine so it picks up perfectly on the next timeline...but i am wondering if the DVD when playing in realtime will have a little black space inbetween timelines.
Thanks again for your help and time :-)
Mark
Hiya Mark.
DVD-Video is video dominant, with the audio always following the visuals so if the audio ends berfore the video it will not (okay, should not) be a problem.
However, the other way around could go either way - if the actual video timeline has ended the audio may well truncate so I would personally add videoblack at the very least.
I am also not at all sure how you are going to work a single contiguous audio file across 3 separate playlists. This sounds flawed in concept to me (have I misunderstood your meaning?). In DVD-Video the format is graphically/visually dominant - the audio must always be tied to a visual asset be it a menu or a timeline - so there is no way to have one piece of audio playing across 3 timelines and having it play back glitch free whilst the timeline changes. You will not get a black space - it will simply stop. So unless I have misunderstood you in some way.........
As Stan says, preview is flaky - the only way to know for sure is to multiplex & burn.

When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

You need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil

I have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

Importing video from Canon DSLR into time line in Premiere elements 10

When I import video from the media files in premiere elements 10 on to the Time line,I get a message saying that the video is not a suitable format and do I want to change it to a suitable format or leave it as it is.If I go to change it then the video does not display on the editing monitor. How do I get round this?

You're right it should work .... but in practice not always.
You have the latest and greatest mac laptop but your camcorder is frankly a bit dated. So my suggestion is to give it the signal that it wants.
You might want to try this little puppy:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812191015&nmmc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Adaptersand+gender+changers-_-SIIG+Inc--12191015
along with a standard 6 pin to 4 pin FW 400 cable. It might be choking on the faster FW 800. This is just a guess though.

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Video flickering on time line

Similar Messages

Maybe you are looking for