Video footage pulsating

I videoed a wedding outside and when the family walks down the isle to be seated as I followed them with the camera and view it on the t.v. when they pass by the video looks jerky and pulsating (like when you have a still image and add movement to it, I know you use deinterlace) What filter would I use to stop this look?

Thanks for filling out your profile...the Katrina thing is already done, thanks.
You'll find an absolute wealth of info in this forum and others. Hang around, do some searches for your issues, and post topics when necessary. oh, and if you hang around, try to help others, that's what it's all about.
K
EDIT - In case you find time outside this forum, here are some links to get you started.
http://kenstone.net/fcphomepage/fcp_homepageindex.html
http://www.proapptips.com/
http://www.creativecow.net/cgi-bin/pagewrapper.cgi?forumid=173&page=/articles/articles_gateway/articles_gatewaybuttons.html
http://www.dvcreators.net/
http://www.adamwilt.com/
http://www.larryjordan.biz/
Search any one of these for your current situation, and you're likely to find something that will work for you....best of luck ;]

Similar Messages

  • Where can I learn how FCP references video footage?

    I'm sure this is a basic (but perhaps involved?) question.
    I've been learning and using FCP on and off for over a year. I've been using online tutorials and developing a basic knowledge of the program.
    I just bought a new 27" iMac with two internal hard drives (the 256GB solid state drive, and a 2TB regular drive). Up until now, I've only ever owned computers with one internal drive, and have never even gotten into editing footage on an external drive.
    I've installed FCS 2 on my new iMac, and now I need to transfer the projects I've worked on to my new iMac, along with the video footage those projects use. And I need to know what the best way to do this is. FCS is on the solid-state drive (of course). I'm sure I should put the footage I'm editing on the secondary 2TB internal drive. And maybe the project files, too? Or should they be on the solid-state drive?
    Anyway, I really don't have a good understanding of what should be where, and what I need to be transferring, and how to make sure that FCP "knows" where to look for the footage I'm editing.
    Is there a place in the manual, or a post here, or a FAQ, or somewhere where I can read about this and get a good understanding of it? This is something I need to know, anyway, so I will know how to backup and store projects that I might want to edit further in the future.
    If it matters, I'm editing footage shot in AVCHD on a Canon camcorder. To date, all I've done is backup the actual AVCHD files on multiple drives, reasoning that if I had a crash I could edit the footage all over again. But I want to learn the proper way to do all of this.
    Thanks!

    When you "uncompress" AVCHD files
    You aren't uncompressing. You are RE-COMPRESSING. AVCHD is compressed, and you can't uncompress that. But, you compress it into an editing codec...ProRes.
    would the result be exactly the same if you did it more than once?
    Not sure what you mean by that. There will be slight loss when you recompress, but nothing you'd notice. Transcoding, as it is called, is quite a normal process. ProRes is so well designed of a codec that you can recompress to ProRes again and again 10 times before you see any issues.
    if I logged and transferred using the same settings, would the footage be exactly the same?
    You can't. FCP doesn't work with AVCHD...it must be converted to ProRes.
    My understanding is that FCP "looks" for video footage where it "expects" it to be based on how and where you imported it.
    Yes. Once you set your Capture Scratch to your external drive, say MEDIA_01...FCP keeps looking for it there. If you move it, then FCP loses contact with it. Until you tell FCP where it is again.
    Let's say I had my project saved, but somehow lost my footage. If I logged and transferred it again from the same AVCHD files, would it come out exactly the same so that (if I put it on the right drive in the right folder) my FCP project would work with it as though it was the original logged and transferred footage?
    Yes....absolutely. The project file is the most important thing. Those clips in there point to the media. If the media drive dies, or the media is deleted, simply highlight all the clips and do a BATCH CAPTURE...FCP will look for the original SOURCE files, the AVCHD files, and then re-transcode them. And they will be exactly like the first time you imported them. And your cut will be rebuilt.
    Or would there be small differences that would result in my FCP project not recognizing it?
    Yes. If you move the footage, rename the footage on the FINDER level, meaning opening the drive and renaming the raw footage, or if you rename the folder that they are in, FCP will lose the connection. Which is why you DON'T do that. Designate the Capture Scratch...import the footage, and only deal with the footage in FCP...until you really know how things work and how to get FCP to reconnect to this footage.
    Shane

  • What are the best sequence settings in FCP 5 for exporting screen capture video footage?

    I capture video footage of websites in order to showcase in a demo reel. Using Snapz Pro, the compression type I have found to have the best quality is H264. When I take this footage into FCP (v5.1.4), I choose DV NTSC 48khz for the sequence setting. If I then select H264 for the sequence compression type, when I go to render I get a 'Codec error.'
    The only way I am able to render properly is by choosing DV NTSC 48khz for the sequence setting and DV/DVCPRO-NTSC as my sequence compression type. The problem with this though is I get a perfect picture in the Viewer, but the picture quality in the Canvas (and the subsequent exported video) is slightly blurred.
    I've been trying to find a solution to this problem off and on for years. I've finally decided now to get to the bottom of the issue. If you can solve this one you are my hero!
    Ted

    Thanks for the suggestions. I've tried using DVCPRO HD in the past, but the picture quality of the captured screen footage turns out blurry. The only codecs I've found that provide a perfectly clear image are H264, Animation and Uncompressed 8-bit. The problem with the latter two is that video files lasting only a few seconds measure in the 100s of MBs. Working with files that large would slow my editing and rendering down to a non-workable length.
    I just don't understand why I can't edit H264 video if my sequence codec is set to H264. The 'Codec error' I get is baffling.

  • Can I use a G4 to get raw video footage to a no-firewire aluminum MacBook?

    Hi -
    I recently purchased a new aluminum MacBook 2.4Ghz and was shocked to discover the lack of a firewire port. Ok, I should have read the specs more closely before ordering, but I never would have imagined this port being removed (other than from the specialized MacBook Air). As others on this board have said, what were they thinking?!
    So I have some questions about downloading raw video footage from a firewire camcorder (forgive any ignorance on my part, I'm new to camcorders and digital movie editing--I've never used iMovie). My goal is basically editing home movies.
    I have an old G4 tower (1.5Ghz, 1GB RAM). I also have an external firewire/USB drive. The tower will not run iMovie '08 because the processor is too slow. The iLife 08 disc refuses to even load iMovie on this machine.
    I haven't purchased a camcorder yet. I spent a lot of time researching affordable camcorders and had settled on a well-reviewed Canon miniDV, which of course, is firewire. This camera does not come with any software.
    Would it work to connect the camera to my G4 via firewire, download the raw footage to my external drive connected to the G4, then move the external drive over to the MacBook, connect it to the MacBook via USB, then import the raw footage to iMovie for editing? I realize the copying over USB would be very slow. I assume I need some type of software for downloading the raw footage to the G4. Since iMovie won't run and the camera has no software, is there some type of utility or shareware that lets you capture raw footage?
    Is there a better way I can use my G4 to get raw footage from a firewire camera, and then on to my MacBook? Or will this work at all?
    I see that there are a few USB camcorders out there, but they seem to be expensive or don't receive very good reviews, so I'd like to go with the firewire Canon.
    Thanks very much for the help with this frustrating issue

    Well, never mind. I'm returning the MacBook and buying a previous generation MacBook Pro, which ends up being about $200 more.
    Solves my problem, but many folks can't afford the Pro. I'll be commenting at Apple customer feedback about the lack of firewire on the new MacBook.
    Thanks for reading the post.

  • My iPad is logged into my iCloud account, but my wife's iTunes. I have uploaded video footage from my iPhone to my iCloud. It appears on the iPad but is not accessible in iMovie? What's the fix?

    My iPad is logged into my iCloud account, but my wife's iTunes. I have uploaded video footage from my iPhone to my iCloud. It appears on the iPad but is not accessible in iMovie? What's the fix?

    You shouldn't have to change your iTunes account to not have to purchase it twice.  If your devices are using different iTunes IDs, just purchase it on one device, then import it to your iTunes library by connecting the device to your computer, opening iTunes and going to File>Devices>Transfer Purchases.  Once in iTunes, you should be able to sync it to your other device (assuming both devices are syncing with the same iTunes library).  (And even if they were syncing with separate libraries, you could use Home Sharing to copy the app from one library to the other.)
    Or, am I missunderstanding something?

  • How to get a photo from video footage

    I would like to know how you can take a photo out of video footage please, in the old I Movie it was possible but can't figure it out for the new I Movie.
    Hope it is still possible!

    Thank Hughmass..

  • Exporting a JPEG in 4:3 from video footage in Final Cut pro is impossible

    I'm trying to export a screen grab from final cut pro as a jpg. It's easy to export a jpg image, but as far as I can tell, it is completely impossible to export it as a 4:3 aspect ratio image. My video footage is all 4:3 but all of the jpg images I try to export come out squished into 16:9. This is driving me crazy!
    Here is what I'm doing . . .
    Export >Using Quicktime Conversion >Format (Still Image)
    From their I've tried every setting you can imagine and FCP still obstinately refused to allow me to export a jpg image in it's true proportions.
    Please prove me wrong.

    Awesome! You rock moblie! Thanks a lot for the info. I was wondering why the image proportions were correct in photoshop (ie. 720x480, I thought those were 4:3 dimensions, but I guess it's just resolution?). I adjusted the image in photoshop to be 720x534 pixels and it looks fine now.
    I realize this isn't the smartest question in the world, but why isn't 720x480 a 4:3 aspect ratio? I don't really understand aspect ratio all that well (as you can tell).
    Thanks again!
    - Big ol' Polarbearski
    Message was edited by: polarbearski
    Message was edited by: polarbearski
    Message was edited by: polarbearski

  • Importing and organizing raw video footage - options

    greetings-
    Looking for a better solution, if available, for importing & organizing raw video. I am using imovie for now. Soon to switch to FC express. After much exploring & learning on my new machine (recent convert), I’m a bit frustrated on how it video is handled.
    Please correct any of these that I’ve got wrong, but it appears that:
    Importing video (from DV camera) with programs provided on my machine can only be done through imovie and idvd.
    Importing video through these programs requires creating a project, and importing the video to that project.
    Then that imported video is associated with that project.
    So I want to take the imported clips (say from imovie), and organize them archiving, use on other projects, backup, etc. I know that I can find the actually video files by control clicking on the project in finder, hit show package, and get to "clip 1, clip 2...clip 55". This represents the raw footage, but now I’ve got say 55 separate clips, for just one import.
    I’d like to effectively organize my various raw videos by year/event etc. So that when working a project, a can pull in the different footage that I want to use. For instance, I previously imported and organzied video footage with my PC editing software, and now, thankfully, I can just bring that various footage from the external drive into Imovie and edit. If I want to do a project and grab some footage from 04, 05, 06, it's all right there.
    Is there a better solution for import & organizing my raw video clips more efficiently with imovie or idvd?? Or perhaps another program. Such that I’ve got the 1/2 hr of video "Christmas 05", one file (not 40 seperate clips), saved, and can pull it into projects as needed in the future... Ideally maintaining the clip breaks. Am I asking to much from apple? How do you all import/manage/save your imported video?
    Much thanks for any feedback!
    20" G5 core duo   Mac OS X (10.4.7)  

    Ciao Rubbersoul,
    unfortunately iMovie doesn't allow you to rename the clips (other than within the project), so if you want to label them for future reference, you'll have to do that outside iMovie.
    I personally save the best shots from each project to an external hard drive using the following method:
    • simply drag the desired clips from the iMovie project to the desktop
    • organize the clips by creating the appropriate folders (e.g. by subject, time, etc.), so you'll find your footage faster
    • rename the clips within the folders. If you don't need to give each clip a separate name, you can use tools like Renamer4Mac (http://www.power4mac.com) to batch-rename the clips.
    • transfer and organize your folders/clips on the external (Firewire) hard disk. You can do that manually or by using media browsers like iDive to organize and view your clips. iDive is a digital hub that can help you to keep not only your video but also music and pic collections under control, and it integrates with iMovie and FCE/FCP. Check it out here:
    http://www.aquafadas.com/idive-digital-video/index.php
    Always remember that DV eats up a lot of disk space and don't forget to back up your footage to tape.
    spero che ti sia d'aiuto
    mish

  • Final Cut Pro 7 stretches video footage

    This question is for Final Cut Pro 7 and, as I was informed, has been posted in the wrong place. However I am unable to move the thread. I apologize for any confusion.
    I have video footage that is 853x480, which is a slightly odd dimension. When I import this footage into FCP7, it stretches it to be 1011x480. Why is it doing this, and can I prevent it? The video footage is .mp4 file type.

    FFCP7 questions should be posted on the Final Cut Studio forum.

  • Do I have to change the format of my canon video footage in order to import

    the format of some video footage that I recorded is currently .MOD and some are .MOI (I have no clue what that means, but that's what it says.. and I'm assuming it needs to be converted into another file-type)
    my macbook pro can't recognize this format, so is there anyway I can change the format of these videos so I can edit it in imovie?
    [I have a MacBook Pro and the footage is from a Canon FS100]
    Thank you!

    The MOD files are MPEG-2 video formats recorded on tapeless media. Use MPEG Streamclip to convert them to Apple Intermediate Codec for editing in iMovie. The MOI files do not contain video; they are basically information files associated with the video files. MPEG Streamclip is free however you will also need to get the Apple MPEG2 Playback Component ($20 from the apple store) if you don't already have it on your MBP.

  • Video footage I've imported from iMovie to Premiere cs6 is missing after the import!  please help!

    I initially imported raw video footage from an event that I shot into iMovie 11, but later decided to try an edit the footage in Adobe Premiere CS6.  I successfully imported the iMovie file folder into CS6, then saved and exited the program to work on it after lunch.  When I returned and reopened the file, the footage could not be found.  I attempted to reopen it in iMovie and it came up as a missing file also.  I know it successfully opened in Premiere because I've seen the footage.  I didn't trash anything so it's not in the trash.  Where did my footage go, and how can I retrieve it?

    Hi Ann, Hi JSW,
    I looked around a bit and noticed that this same problem sometimes happens in iMovie itself. People lose their media because it gets copied inside the project file itself. If you right click to see the package contents, you might be able to locate the media and copy it to a dedicated folder, then reconnect media to it in Premiere Pro. See this post on the apple website: Source clip missing | Apple Support Communities
    Thanks,
    Kevin

  • Does iMovie support raw video footage?

    I have a MacBook Pro that is about 3 years old.
    I am trying to upload video footage shot in RAW to iMovie.
    But I keep getting error messages or iMovie just closes.
    I can upload short clips of 10-30 seconds.  But my clips of
    1 -2.5 minutes fail every time.

    Almost Margo wrote:
    …  I am trying to upload video footage shot in RAW to iMovie. …
    'raw' means manufacturer-specific, less processed still-formats.
    best to my knowledge, no such thing for video-codecs.
    so, what do you mean with 'raw'video?

  • Why is video footage lost on ipad after creating an imovie?

    Having created an imovie, why does video footage disappear , how can it be retrieved, any tips to prevent in future and while on the topic , how can a Dvd disc be created to create a hard copy of all imovies?

    Hi
    If You open one in QuickTime-player
    then open Inspector - cmd+I
    read
    Video format (codec): nnnnnnnnnnnnnn
    Frames per second: YY.yy
    What does it read ?
    (as .mov and others are no Video Codec but just a container (sort of folder) and can hold so many different Codecs)
    Yours Bengt W

  • Missing video footage

    Hello,
    I'm using the JMF to playback some video footage. The footage is raw avi and is rather sizable. It was captured with amcap if that is of any help. My problem is that java will not play all of the video but stops before the end. I think it also sees an EndOfMediaEvent. Does anyone know why this might be happening? It doesn't appear to happen with mpegs but then I cannot use the FrameGrabbing and Positioning Controls.
    Thank you,
    VK

    Well, according to the known issues page:
    "Some movies might require more memory to play than is available from the Java VM. In this case, you'll need to allocate more memory for JVM to run. For example, by issuing the command: "java -mx32m". "
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/issues.html]
    So yeah, you need to increase the amount of memory that your JVM has available with the -m switch. Do a google search if you're unfamiliar with the -m switch.

  • How to create a standard DVD from HD video footage

    Hi everyone, apologies in advance if my question has no doubt been asked before. This is my first post and I am desperate for some guidance. I’ve scanned previous questions on similar topics and haven’t quite found the same query (or had the confidence to spot if it was the same problem!). Here goes.
    My son recently videoed a family wedding using a:
    1. SONY FX7 Camcorder.
    2. In HD108i
    3. Using mini DV tapes
    4. The video included video footage, it incorporated single pictures from another camera and has a musical score in the background.
    5. My son used Final Cut Pro to edit the film
    6. The finished film is stored on the main memory of his MAC Book Pro and also on a separate external hard drive. At preent it can only be viewed using his MAC linked to the TV directly.
    7. The memory used is…wait for it….20GB!
    While the quality is first class we are clearly struggling to copy it on to a standard DVD that our relative can pop into their ordinary DVD player. I appreciate that the quality may well suffer if we can do this, but I cannot see any other way of getting copies of the video to those who attended in a friendly format. We will keep the master copy in its original format though.
    Assuming that it can be done, would someone please advise me on the procedure? I would be most grateful. I’ve tried Apple technical support, but I might as well be asking for the whereabouts of the lost ark!
    Many thanks in anticipation
    Huppy

    Simple answer: Open iDVD and import the finished movie into it. Let iDVD take care of the DVD encoding for you, choose one of the wedding templates for your menu and burn it.
    More complicated answer: Open the manuals for Compressor and DVD Studio Pro and learn how to use those tools to author DVDs.
    The 20GB of disk space is completely normal for HDV.
    It tells me that your movie is about 100 minutes long. Video takes a lot of space. Hard drives are cheaper than they have ever been.
    Good luck with your project.

Maybe you are looking for