Video frame to still photo

Am first time Imovie user, downloaded video from my camera to Iphoto , would like to save some of the image in the video as individual still photos . Is this possible? , Do I do this in Iphoto or Imovie? Am using Snow Leopard thanks in advance Mhairi

This function is available in iMovie.
It is also available in the VLC Media Player, a great app that will play just about anything you throw at it. And, it is FREE.

Similar Messages

How can i change an ipad2 video to a still photo?

Hos can I change a ipad video to a still photo?

If they are videos that you've taken with the iPad then there are some apps that claim to be able to do it e.g Video 2 Photo appear to have decent reviews/ratings.

How can I turn my video into a still photo to be copied for a book?

I accidentally took a 2 second video with my iPhone. I just wanted a still photo. I want to put the photo in a photo book. I know I can shorten, or trim, the viedo. But can I stop it entirely so it becomes a photo that I can print? How do I do that?

There's an App for that....
Go to the Apps store and search for Megaphone. There are a few Apps available that may or may not meet your needs. You will have to read the descriptions and reviews to decide - some of them are free.
GB

I do underwater video and add still photos to the video I create. When playing the video the still shots show distorted lines in any design in the picture and as it transitions to the next photo it clears up for a split second. What is causing this?

The photos are clear for the firt instant the appear during palyback and for the 3 or 4 seconds they are on the screen any pattern or design in the photo, say a patterned tablecloth, the pattern goes wavy, distorted, and then at the last moment before moving on the photo goes clear and smooth. It looks like when the picture goes in the "freeze" mode it distorts and when releasing for the next photo it smooths out again. This is really messing up some very good underwater still shots and land photos. I'm using a transition between photos and not using Ken Burns effect. Could use some help on this. Thanks.

so. to summarize your workflwo in my own words:
you're applying 12Mpix stills to an iMovie project
(btw: what setting has the iM project…?)
iMovie doesn't do interlaced internally…
you then 'share to iDVD'
as far as we know, iM converts to some h.264 file…
iDVD has to convert that again, to finally create a standard DVD:
720x480pix, interlaced = 0.3Mpixel resolution (yes, zero.point.three )
and, you're watching via a projector - most projectors have a non-video-resolution e.g. 800x600, 1200x800:
again, scaling effects.
so, tons of scaling/resizing, tons of comversions …
a) use any graphic tool (your Mac's Preview.app?) to scale the pics BEFORE import to iMovie to your Projects resolution (1920x0180, 1280x720, 720x480); choose tiff or png as doemat, avoid jpg
=> this avoids lossy scaling effect in iM
b) if DVD is your only delivery media, set iMovie's Project preferences to your TV-Standard (PAL/NTSC)
c) from iMovie, use 'Export using Quicktime', and in its options, choose AppleIntermediateCodec as … codec
=> this exports iMovies internal timeline without lossy conversions
d) set iDVD manually to same standard as your iMproject, 25/PAL or 30/NTSC
e) stay under 60min of length to allow max. quality
f) try to find a resolution on that laptop that comes close to DVDs res; synch res of laptop with proejctor
g) consider iDVD solo to create a slideshow; avoids any lossy 'inbetween steps' due to iMovie; very limited in terms of 'creation' … creates a slideshow (with music and transitions)
h) consider to avoid the DVD process at all; export from iMovie a 'file'; use a usb-stick to transfer to playback-computer; allows HighDef! DVD is SDef only ...
to create a file whic is compatible with any computer, follow my advice here:
How to create a video for playback with Windows/XBox/PS3/… etc?
For maximum quality of stills, I would use iDVD only (disk, but SDef only);
or avoid disks at all, create a charming HDef iMovie project and transfer via stick

Integrating still photos over video but keeping existing audio

I am currently trying to make a video that includes still photos. I have the video clips i want in my final project, as well as the photos. I am having a problem keeping the existing audio playing while my still photos are shown. I want to make it so you see photos while I am talking about them in the video clip, but then allows it to return to the video in the same duration...let me know what you think.

In iMovie/Preferences, make sure that Advanced Options are turned on.
Drag your photo from the Photo Browser and drop it on top of the video clip at the frame where you want it to start. A contextual menu will pop up. Choose "Cutaway".

How do I create a still photo from a video in the new iMovie?

How do I creat a still photo from a video in the new iMovie?

I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX. It's kinda hidden in the "share." Go File/Share/Add Destination. You want "Save Current Frame." After you've created that destination, it'll be there for you in the future under Share.

Creating cross-dissolve from still photo to video

Hello all ...
I'm try to create a simple cross-dissolve between a black-and-white photo (imported into FCE as an RGB Photoshop file) and a color (1440x1080) video clip. My problem is that FCE will only insert the dissolve on the right (video) side of the edit, the result being that the photo abruptly goes to black, followed by a gradual fading-in of the video. This is not the effect I want – I'm hoping to create a smoother transition between the two. I suspect that I haven't saved the still photo in the correct format, but I can't seem to find any help in my various FCE books.
So: How do I apply the transition to both sides of the edit? Is it even possible?
Thanks in advance for any and all advice.
Alec

Tom, I figured it out. The audio for the video clip was overlapping the edit (i.e. it extended to the left, so that the video clip's audio ran under the still pic). When I got rid of the (easily replaced) audio, the regular cross-dissolve worked.
Now I just need to figure out how to make the transition last longer than 13 frames!
Thanks for your prompt responses ... I really appreciate it.
Merry Christmas!

How do you drop a still photo into a video?

how do you drop a still photo into a video -- while continuing the audio track unchanded?

by popular demand, Kelli Applies Lip Liner to Audrey's Lips has been completely re-mastered. (ok, it was just one person who asked, but she's a very intelligent and articulate observer of such matters. she noted that the clip suggests "interesting possibilities", but that men probably would be unaware of that. i explained that "men are pretty simple, so we don't see too many moves ahead." she laughed.)
i believe that in an earlier post i indicated that in the re-mastered version i would delete the in-camera audio and dub in the audio from the Zoom H4n audio recorder. this i did.
(syncing the video and audio continues to be a nightmare, though ).
besides signifcantly improving the sound quality, using a separately recorded audio source allowed me to drop (2) still photos into the video track, and still preserve the continuity of the recorded conversation.
dropping in the stills the correct way (unlike in the first re-mastered video) was easier than i thought it would be. it's just a matter of dragging the Premiere Elements 7's red vertical timeline-cursor to the point on the timeline where you want the insert to begin, and then dragging and dropping the still photo alongside the red cursor. the amount of time the still will appear can be shortened or lengthened by dragging with the mouse -- the same way any other file can be extended or contracted.
the video coming out from the still was now running behind the soundtrack. but, the timeline shows the exact duration of the still, so the video coming out was shortened with the mouse by that same duration, and then the audio and video were back in sync.
to add the "sound effect" of the camera's shutter clicking (actually its mirror slapping) before each still appears, i found a point on the audio recording that had the click of my camera actually taking a still, and that had only a little audio from the models underneath it. removing all the audio before and after the sound of the camera click was, again, just a matter of finding the start/stop points i wanted, moving the timeline's red cursor to those points, and using the mouse to drag the ends of the audio file alongside the cursor.
because i wanted the sound of the camera click to merge with the converation anyway, i just put the audio file of the click on its own audio track (which allowed me to separately control its volume).
however, when i tried to copy and paste the audio file of the camera click to the beginning of the second still photo, i was not able to copy and paste by the normal method of using the mouse to right-click-file/left-click-"copy"/left-click-"paste". eventually, i tried doing so by clicking on "edit" on the menu bar at the upper left and then clicking on "copy" and "paste", and there was no problem. (go figure.)
as with the other re-mastered video, i brightened, increased contrast, made the hue a bit warmer, and added a little sharpening. (this has to be done individually for each separate video file that makes up the whole piece -- at least that's what i did.)
interestingly, the audio level can be tweaked directly on the timeline by using the mouse to drag up or down a horizontal yellow line running the length of the audio file.
i again rendered in Adobe Flash Video (.flv). (annoyingly, in XP at least, there's a default download destination that has to be reset everytime you want to save in a different location). from a drop-down menu i selected "NTSC Flash Video 700k" (just in case) and left the file name as "Untitled" (since no matter what i change it to, it saves as "untitled.flv", so i have to rename it anyway once it's saved).
i went into "Advanced..." and, to preserve the dimensions and the HD, i unchecked "Resize Video", chose "Same as source" for the frame rate, and checked 2 "Encoding Passes" (just in case).
for some reason, everytime i click the "save" button, it asks what i want to call these settings. if i use the name i used for the same settings on the previous go-round, it says that that name is already used and (impliedly) can't be used again. so, i add the new date, and yet another name for the same settings gets added to the drop-down menu (odd).
once the compressed .flv file was saved, it was an easy upload to youtube.
btw, it seems that the Elements 7's Audio Mix defaults to 0 dB, OR whatever the setting was in the prior saved version, unless i use the mouse to continuously "ride the slider pot". that's ok for a 48-second video, but does anyone know of a way the dB can be set so that it just sits there, instead of moving back to where it previously was

How can I create a still photo from my video

How can I create a still photo using my video.

I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX. It's kinda hidden in the "share." Go File/Share/Add Destination. You want "Save Current Frame." After you've created that destination, it'll be there for you in the future under Share.

How do I create still photos from a video in iMovie?

I am looking to create a still photo from my video. Is this possible? Thanks for any help you can give..

If you want to create a still frame from within iMovie, move your playhead to the frame you want a still image from and ctrl-click. You'll get a slightly different option to create a still frame depending on whether you do this in the project or event window.
From the event window iMovie will add a still at the end of your project, from the project window it will add a still at the playhead.
If you wanted the still on your desktop rather than in iMovie, select the still, ctrl click and choose reveal in finder, copy the image to your desktop and undo your actions in iMovie to remove the still from the project.

In a video (Premiere elements 12) how can I control the time a still photo is displayed? I would like a shorter time than 5 seconds, maybe 2 or 3 seconds.

In a premiere Elements 12 video, how can I have a 3 second display of a still photo?

toothdoc1
What computer operating system are you running your Premiere Elements 12 on? Are you working with a NTSC or PAL setup?
Assuming NTSC setup...
You can set a Still Image Default duration so that all the stills that are imported after that set import with the same duration (the default is 150 frames equivalent to 5 seconds in a 30 frames per second system) See Expert workspace, Edit Menu/Preferences/Still Image Default duration.
Once you get your stills on the Timeline (at the preferences set), if you want to, you can change the Still Image duration for one or more of the stills on the Timeline. To do that for one, right click the Timeline still, select Time Stretch, and , then in the Time Stretch dialog set the duration that you want. There the format is 00;00;00;00 (hours;minutes;seconds;frames). So, a 3 second duration set would look like 00;00;03;00.
If you wanted to do the Timeline still duration change on more than one at a time basis, then adjust the first, followed by a copy and paste effects and adjustments in the selected rest.
Please let us know if you are Ok with the details or you need an clarification on anything written.
Thanks.
ATR

How to resize stills to match video frame size

how to resize psd stills to mach prevailing video frame size -1280x720 ?

Photo Scaling for Video http://forums.adobe.com/thread/450798

How do I capture a still photo from my video footage??

Probably easy I know, but just wondering how to capture a still photo from my video footage. I pulled a particular clip into my viewer window and have found the still shot I want, what next??
Thanks in advance for any help.
Cheers,
Bill
Boulder

Put the playhead over the frame in the timeline and choose Modify>Make Freeze Frame. It will appear in the Viewer window. Drag it into the timeline.
If you want a photo for iPhoto etc. put the playhead over the frame and select File>Export>Using QuickTime Conversion.
In the window that opens change the "Format" setting to Still Image from the dropdown menu.

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size.
I don't understand why this is happening.

Quick follow up, since I was on my phone earlier and am back to a real keyboard.
To access Easy Setup, hit Control Q.
If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
Good luck.
Russ

Taking A Still Photo From A Video Clip

How would I take a clip from one of my videos, and turn it into a still photo that can be edited and printed in iPhoto?

A still frame from an Event:
Put cursor at the frame you want, then right click (or command click) and select "Add Still Frame to Project".
The still frame will be added at the end of the Project.
A still frame from a Project:
Put cursor at the frame you want then right-click (or control-click) and select "Add Freeze Frame". The Freeze frame will be added after the clip.
In both cases:
Select the still frame (so the yellow band is around it).
Right-clicl (or control0click) and select "Reveal in Finder".
You will see a JPG file highlighted in the finder.
Drag this file and drop it on your iPhoto icon in the Dock.

Video frame to still photo

Similar Messages

Maybe you are looking for