Video frames are heard during play back in the audio line (but not on the DVD)

Another problem occurs( among lots of other annoying problems which are not solved yet). Using PPRO 5.5 in two projects now and I am very dissapointed in the quality of this software comparing to PPRO 2.0. To many problems to mention here. It works and thats all.
This is the new problem. When I play the project, the video frames "are heard" ( sounds like the old film projector transport) at low level in the audio signal together with the audio signal itself (at normal level)
This is annoying during editing, but doesn't affect the results by burning on DVD. Is that an normal situation? In my old PPRO 2.0 not such a problem was there. Or is there something wrong.
Thanks for replying
Chris

Chris,
I'm sorry I could not find a solution. In fact I'm stumped and request the help of Todd or Wil or some other Adobe employee to help you out.
Why? The reason for requesting Adobe's help in this way is:
a. Chris has a limited knowledge of English and works with a Dutch version of Windows, which makes it difficult to communicate on the phone.
b. I have checked his system with Teamviewer and the system is more than adequate and is properly tuned/optimized for the task he wants to perform.
c. I can't find a solution to help him.
What is the problem?
System is an i7-2600K with 16 GB memory, P67 mobo, nVidia GTX 570 and 520 cards, 5 x 1 TB disks, 3 monitors, on-board audio.
Source material is simple DV PAL widescreen from a JVC camera. Sequence settings match, no problems here.
Playing a clip with WMP shows no problem, playing from the camera to a TV shows no problem, but playing from the timeline in a CS5.5.1 project results in a clearly audible rattling that is comparable to the rattling one has when projecting old 8 mm film, only louder. This was clearly audible for me over the phone.
I have no idea where to start looking for a solution, because his system looks good from all sides, is properly tuned, has more than enough horsepower to edit simple DV material.
So please Todd, Wil or anybody else from Adobe, can you help Chris?

Similar Messages

Sound keeps buzzing during play back

I have recently bought the HP Pavilion lap top and when I have come to listen to tracks either those on the hard drive or via apps like Spotify the sound occassionally stutters and is buzzing during the songs, any suggestions on how to fix this problem?
thanks

Hi Denzel6362, sorry to hear that you are having a issue with buzzing during play back on your computer. What is the exact model number of your computer? On the bottom of the computer you will see a white sticker, you will find the product number on he sticker by a bar code. Hope to hear from you soon so we can get this issue resolved for you.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Sound problem during play-back

Dear friends
After recording images with my MSI TV-Tuner card, i cant get any sound during play back. First i had Win-Amp installed on my system that i thought may be it is the cause of the problem. After uninstalling the win amp, again the problem existed. Even i have installed the Beta version driver of my MSI tv tuner but i hadn't any success in solving the problem .
If somone can help me to solve this i will be appreciated.

make sure you have the recording input set correctly in your settings (look under Device options)
however your tv tuner is connected to your soundcard (eg Line-IN) then this should be set accordingly

HT201109 When I download my Final Cut project onto a DVD 3-4 photos are continually repeated throughout the presentation. If played back via the computer there is no problem

When I download my Final Cut pro project onto a DVD about 3-4 photos are continually repeated throught the presentation. If I play back via the computer this does not happen. It is the same photos repeated. I have taken loop off from view. Any assistance ?

I have two projects one with DVD and photos and the other just photos. The DVD is 20 mins and the photos just 8 mins.
I have tried to burn from the share dropdown menu ( DVD ) in FCXP and also tried download to media browser then used DVD creator to produce the DVD but the problem exists with both actions. I deleted the repeated photos from the presentation but another 3-4 different photos repeat. I hope this makes some sense .
thanks salty777

MTS files jerky when played back in the Editor of Premiere Elements 12

Hi ATR
I know there is only you that helps us Adobe users with problems!!
I have now got Photoshop 12 and premiere Elements 12 set up yey!! so now I want to start my editing
So I go into Premiere Elements Editor and choose my files which are on my hard drive
These are MTS files that have been taken with my Sony Cybershot DSCHX20V however when I try to play back the videos they are jerky so I am unable to edit them
Now I know I asked this question before when I had the trial of 13 and you got it working for me but I cant find the answer
There is no orange or green line so I am unable to render the videos
In the project settings it says display format as 25fps Timecode
Frame size 1920 hoizontal 1080 vertical
Hope you can help
Jilly

Morning ATR
The camera was set for AVCHD and so the videos that were taken are in the format AVCHD mts. I since changed it to mp4 format but the videos that I want ti edit are in mts format and like I mentioned they are jerky
When I am in the organiser of Premier 12 and I can hear the playback so that is ok but its jerky as well as the editor. I've also noticed that playing back in the organizer, the playback is very pixelated?
1. Forced Timeline Rendering
i did exactly what you said ATR and changed the time stretch to 99% and that worked perfectly!! You're a genius!
2. AVCHD.mts versus AVCHD.mp4
I found an MP4 format video and added it to my timeline with the MTS files and that one play ok. The time stretch on that file is at 100% so do I have to keep changing this to 99% all the time or only when its choppy and jerky?
Step 3 you asked me to do the below
From an AVCHD.mts 1920 x 1080 @ 25 progressive frames per second) project, export to Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p25 and
tell us if the playback is smooth.
Then, from an AVCHD.mp4 1920 x 1080@ 25 progressive frames per second) project, export to Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p25.
Then compare the smoothness of the playback of each.
From looking at my project settings the timebase is showing 50.00 frames/second?
You have said from a AVCHD.mts 1920 x 1080 @ 25 progressive frames per second) project? Do I need to change this now?
Would you be able to tell me how to do a screenshot in windows 8 please? It would be so much easier but I am struggling to do it on the website itself
Thanks ATR
Jilly

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Plus, EXACTLY what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Issues with play back in the time line

I am having issues with play back in the time line.
am working with footage captured off a DVCAM Tape in a DV/DVCPRO NTSC Time line.
My settings are set to match the source footage so I dont have to render. What ends up happening is the footage at times plays fine and smooth and then out of no where it will start playing choppy. like its lagging. But the Audio stay fine. I use to have to problem before but then it stopped.
Now its back and I can not figure out why it does this. Usually a restart of the system would help solve it but now it still keeps coming back.
i have tried different settings in the RT menu and still seem to be having the same problem.
i am running the footage of 3 1TB drives in Raid0 and the System has 16GB of Ram. So I dont see this being the issue.
any ideas?

of course not, the system boots from a 320GB Western Digital Hard Drive. (the one that came with the system)
I have a feeling that its not the Hard Drive, but no idea what it could be.

My videos on iPhoto no longer play ... the message reads OSStatus error -54. anyone any idea what this might mean?

My videos on iPhoto no longer play ... the message reads OSStatus error -54. anyone any idea what this might mean?

Hi Terence,
FWIW...
I just restored my entire iPhoto library from Time Machine. I'm running Yosemite. After opening iPhoto for the first time after restoring the DB, it asked me to confirm my library location. Then it proceeded to update all the thumbnails. After this was completed, I observed what the OP reported: all photos work normally, but all videos were a.) missing thumbnails; and b.) yielding this error code when attempting to open.
HOWEVER. Doing a Reveal in Finder showed the videos on disk, and they were playable. After quitting iPhoto and restarting it, it *again* said it was updating thumbnails, and now all the videos both have the thumbnails and play correctly from within iPhoto.

I want to be able to access my photos that are stored on iCloud – I see mail and contacts but not my pictures? I have been backing up for a long time - Where are they?

I want to be able to access my photos that are stored on iCloud
– I see mail and contacts but not my pictures?
I have been backing up for a long
time - Where are they?

You can't view them on iCloud.com. And photos (and other data) stored in your device backup can't be viewed, other than by restoring the backup to your device.
If you want to view your photos on the web, for the time being you will have to add them to a shared stream (album) with the Public Website option enabled. This will give you a private url to view them from a browser.

Audio doesn't play back through DAE audio tracks

I work on Digidesign HD hardware and Logic as a front end and a problem has crept in over the last week or so.
I will be working on a song and suddenly with no warning Logic freezes for about 30sec or so. After this all audio files playing back on DAE tracks will not playback or white noise plays back from those track. The DTDM tracks and instruments tracks work fine. This happens wether i have a couple of tracks on the go or loads. It's like the DAE audio playback side crashes but all other things still play back through the DAE so it half works.
PLEASE PLEASE help as i have to reboot Logic everytime and 10-20 mins later it happens all over again.
Thanx
G5 dual 2Gh Mac OS X (10.4.2)

Just some quick thoughts....I'm not a "techie", but have had my share of softwaretrouble!!
It could be that Logic is set to global 16bit - and you try to play back 24bit files. Had kind of same problem a year ago, but don't remember if it was Logic OR ProTools that gave this result (played for a while...then a burst of white noise). But the crash...no. This is probably caused by other components. It's usually a good thing to trash the Logic preference file and restart. Then check preferences>audio>drivers>DAE that the global bitrate is set as desired (according to your already recorded files). The DAE preferences don't contain that much information, but could be helpful to trash too. Just remember to set the playback buffersize to a reasonable amount for your setup.
Hope this will help.
G5 Dual 1.8 / 3GB RAM Mac OS X (10.4.6) Logic Pro 7.2/ProTools 7.1 HD2 Accel/192 IO

Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

You have to make sure they are fully compatible with iPad
Video formats supported:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Audio works in audio chat, but not in video chats.

So, when I start an audio chat with a friend, we can hear each other just fine. I then switch over to a video chat, and she can hear me, but I can't hear her. I already had to do all sorts of port forwarding in the firewall settings and router in order to rid myself of error -8... this is kind of frustrating!
I fixed the problem a week or so back by simply restarting iChat. When I tried that this time, no dice. Any ideas? Seems odd that it would work in audio chat but not in video chat...

I am having the same issue. Last night my sister and I did a video chat (which took some doing- we are both neophytes which it comes to this technology). It was great! But we had no audio. So we typed our conversation for quite awhile till my sister turned on her speakers...... Then she could hear me!! Now we were excited. But I never could hear them. On the video window there were 3 icons at the bottom, one being a microphone icon which had a line through it. So we are assuming the audio problem is on her end (she's using a Dell) and not at my end (since she could hear me)- is that correct? I checked all my settings and I had my speakers on the whole time with the volume maxed out. I could hear clicks when she wiggled something on her speakers but that was it. Any clue what she needs to check? I know I am posting in a Mac forum but we are giving it try again tomorrow and it would be nice to hear her. I know that there are plenty of us Mac users that have relatives that use PC's so maybe someone might have an answer. Will keep searching though. Judy

Need to be able to type in a colon(:) in the Email line of setting up my ntlworld mail account. Able to put in a colon in the Name or Password line but not allowed in this line as presumably who ever heard of an email address with a colon.

How can I insert a colon(:) when setting up my ipad mini for a New Account ? (Mail, Contacts, Calendars to Add Mail Account to New Account)
Virgin media require a colon as part of the Email line . I can put in a colon on the line above or below ie Name or Password line but not this line

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

If you made backups of all of your photos and your catalog file using some third-party method (i.e. not using the PSE catalog backup command), then you should be able to restore everything.
Step 1. Put the photos in the EXACT SAME LOCATION as before. For example, if they were in subfolders of C:\Users\<username>\Documents, then they must go into the exact same subfolders of C:\Users\<username>\Documents.
Step 2. Move the catalog file to wherever you want it to be, and then double-click on it.

TS2610 My project plays on any Mac but not on my dvd player. Please advise.

My project plays on any Mac but not on my dvd player. Please advise.

Unfortunately that didn't do the trick. For the life of me I can't figure this one out. However, if I author it using iDVD (with the same media) it works? I'd make do with IDVD if I could get rid of the Apple logo in the lower right corner.

Video frames are heard during play back in the audio line (but not on the DVD)

Similar Messages

Maybe you are looking for