Video freezes at the end of clips.

Hi, I have encountered strange glitch. I have put many short clips into project, with straight cut, no transitions between. Some of clips doesn't follow seamlessly - video freezes for about 1sec at the very end of clip but I can hear audio from following clip and after that 1sec freeze video continues with audio. Therefore I "miss" that 1sec of video from the beginning of the clip. It happens only with some of clips and sometime I can sort it out with slight trimming. But mostly cannot.
What am I doing wrong there?

If you go into iMovie Preferences, make sure you select "Display Time Codes" as hh:mm:ss:frames.
By default, iMovie edits to the nearest 10th of a second, but by checking this parameter in preferences, you can edit to the nearest frame.

Similar Messages

Why is my project freezing at the end of each video demo?

I've created a project with three different video demos. I've done all the editing and have the video slides in the right order, however, each video demo freezes at the end instead of continuing on to the next video demo.
Please help.
Thanks,
Jaimie

Are you positive that it's not just downloading the next video in the background and that's why it just looks like it's stalled? What happens if you just let it sit there for a minute or two? Does the next slide then start playing?

Repeated Frames at the end of clips

I have a MacBook Pro with the adobe premiere pro cc 14, but I noticed this problem is CS6 also. The problem is this: Say I have two clips in the timeline that are connected (Clip A, Clip B).
If I alter Clip B in anyway (change scale or position, or simply remove it from the timeline) the first frame of Clip B will remain at the end of Clip A. So, when I execute the playback function I can see a quick flash of Clip B at the end of Clip A.
Here's what I've tried:
I tried rendering the files--didn't work.
I tried simply trimming the repeated frame off--didn't work.
Here's what did work.
There's a straight line that goes through every clip, I don't know what its called but I think it has something to do with the speed, I would drag that from say 100 to 96.55. The video would have the red render bar above it, and the repeated frame would disappear.
HOWEVER, in my current project I have serval repeated frames in a blank space where there are video clips, so the previous method can not work.
What the heck!?!?!
Thanks

What are these clip exactly
Please post a screendump in treeview.
MediaInfo Mac

Video freezes in the Canvas

Has anyone encountered a problem like this -
When I open a clip from the timeline into the Canvas and hit play, the clip starts playing but after a few seconds the video freezes; however the playhead in the timeline continues moving normally and the audio continues playing normally.
I discovered that if I render all video the problem goes away, but as soon as I do any more editing (even simple things like the razor tool, that doesn't require rendering) the problem comes back. Goes away as soon as I render video again.
In all other respects, FCE seems to be working fine and I have completed projects to DVD without further hitches. But it sure is aggravating to have to render all the time just to watch my results in the Canvas.
I suspect someone's going to tell me to update QT, so here's the rundown on my system - FCE HD 3.0 on an iMac G5 with 2GB memory, 10.4.2 and QT 7.0. I have not installed the Apple Intermediate Codec 1.0.1 or the ProApps Update 2005-02. All my projects are NTSC 4:3 DV. If you recommend that I update any or all of this, which revs of which updates do you recommend?
Thanks in advance for any suggestions / fixes.

Well, I did mean the Canvas, not the Viewer. I guess I should have said 'when I play a timeline clip' instead of 'when I open a clip.'
I almost never change the Canvas or Viewer window sizes and don't recall any elevator strips showing, but I'll check the window sizing, maybe I inadvertently bumped it.
Thanks for the suggestion.

I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8 BBC IPLAYER

I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

A portion of the audio is missing on the end of clips?

Using Adobe Premiere Elements 7 a portion of the audio is missing on the end of clips after I bring it in. The files are motion JPEG AVI .

Welcome to the forum.
I do not recall seeing any issue with muxed MJPEG files, regarding truncated Audio. First, take a look at this ARTICLE on MJPEG files.
Next, all Audio files (muxed or elemental streams) must be Conformed, which converts them to 32 bit, floating point files for editing. If one does not allow the Conforming to complete 100%, the Audio can be truncated. See this ARTICLE.
Good luck,
Hunt

Camileo X100 freezes using remote at the end of clip

I bought a Toshiba Camileo X100 a few days ago.
The camera is great, I like it very much.
However, there is a problem with the firmware I think.
The remote control is functioning, as expected, although there is no detail about its usage in the manual, I had to guess everything.
The problem is the following. If you go with the remote to play a clip, you wait for the end of the clip, and would like to go back to the previous screen, you press the Back/Cancel button on the remote (right bottom button).
If you do this, the camera freezes.
You have to switch it off and switch it on again to be able to use it.
The bug was confirmed by HRP Hungary (distributor and service in Hungary), we tested it together over the phone, so it should not be the problem of my specific camera.
What could you advise me on this?
The following issues are not bugs, but during playback it would be useful to be able to see somehow the details of the clips recorded (at least the time of the recording), and to be able to set some settings for recording, so that the camera does not forget everything at turning off (e.g. stabilization, or pre rec setting etc.).
Why do you have to have the screen open, when you are shooting a time lapse for a few hours, or during playback on TV?
THX for any help.

Hi there,
THX for checking. I also sent a letter to Toshiba, first they wanted to replace the camera, then I explained again that the replacement will work the same way, no answer since then.
What I ment during playback, is some information about the clips, e.g. the time, when the recording was made. Currently you only see the number of the file and the total number of files in the list, and the length + the number of the files when you are on one file. On other cameras you see the length, the time of the recording, the settings used. On Camileo X100, you see only the length and the basic setting, but no data on the time of the recording, or other metadata (e.g. stabilization focus...). It is not a bug, but would have been useful.

Unwanted freeze frames at end of clips

Hi! I use iMovie 08 v 7.1.1 (529). My project is in 16:9 format and the video I use is 1280x720px .avi files (mjpeg codec) taken with a Canon TX1 camera and imported into iPhoto's library.
I have done about ten small projects in iMovie now, some are just clips strung together with cross disolve and/or ripple transitions between them. Other projects also have a background audio track extracted from long clips.
Lately, for no apparent reason, the video in some clips in my projects freezes about 0.5 to one second before the end of the clip. The transition to the next clip goes ahead with the unwanted freeze frame, and the background audio keeps playing - thereby going out of sync. This problem is apparent both when previewing the project in iMovie before it is exported, and also in the exported videos. (I have exported using Quicktime and .mp4 format - both as .h264 and MPEG4 Improved.) The first time I noticed the problem was when I was exporting a project at 10000kbps video (which probably was a bit higher than needed). Now the problem happens all the time, regardless of bitrate.
The strange thing is, these projects exported perfectly a few days ago. Then, trying to export them again now, the freeze-frame problems occurs.
When control clicking clips in any of my projects and selecting "Reveal in event browser", I now get the message that "the event for this clip is no longer available". Asking iMovie to "Reveal in Finder" works like a charm though.
Anyone got any ideas?
Cheers,
:Marius
:o)
Message was edited by: Marius1980

The following information is extracted from the FCP User Manual, and gave me an explanation to such black extra frame at the end of my edits that I used to fund too. I hope it helps you.
Learning About the Out Point Inclusive Rule
Before you begin to set In and Out points, it’s important to understand the “Out point inclusive” rule that Final Cut Pro follows, so you can avoid an unexpected extra frame at your Out point.
Out point inclusive means that when you set an Out point at the position of the playhead, the frame that the playhead is on is included in your edit. This rule means that whenever you set In and Out points, the minimum duration set is always one frame long. For example, if you place the playhead on a specific frame, and then set both an In point and an Out point, the In point is placed at the beginning of the frame and the Out point is placed at the end, resulting in a one-frame duration. If this rule did not exist, it would be
possible to create edits with zero duration, which would be useless.

How can I record narration with no video or beyond the end of my video in iMovie?

I have a question about recording narration in iMovie.
I wrote a script to read as the narration for a movie I'm making. My thought was I could record the narration first, then add video to match the spoken words.
I've done this before in Sony Vegas on my PC and it worked out well, better than trying to speak to what was going on in the video after I record the video.
Unfortunately, if I try to record narration in iMovie without any video being there yet, it won't record. It appears I need to put a video clip on the timeline first.
If I put a short clip in and try to record narration beyond the end of it, iMovie quits recording at the end of the video clip.
So I went to quicktime and recorded my narration there and have 10 audio files (since I just don't seem to be able to read this whole script without making mistakes).
I then tried to add all 10 to my movie and I think it made me add a video clip first, but after I did, iMovie overlayed all 10 audio files on top of each other.
If I try to drag them over one at a time, I still can't get them to go sequentially unless I add more video to my movie.
There must be a way to add audio files or create narration without having to create a video file longer than your audio first. Isn't there?
I just can't seem to find a way to get the audio files layed out one after another without more video. Very frustrating.
At this point, I really want to know how to add audio files beyond the end of my video since I have them all recorded.
But I'd also like to know how to record narration beyond the end of the video too for future projects.
Thanks!
Brad

You could insert a bunch of placeholders in the timeline before doing the voiceover.
You can find a range of placeholders (they are actually templates used in iMovie Trailers) in the Maps, Backgrounds & Animatics browser. This is the last browser at the end of the centre toolbar, after the Titles and Transitions browsers. Click on it and scroll down to see all the animatics (aka placholders or templates). Drag a number of these into your project timeline - as many as you think you need to cover your audio.
When you've finished the voiceover, drag photos directly onto the animatics and select Replace from the pop-up menu. Adjust the timing by using the Inspector (double-click a photo to open the Inspector, then change the duration).
John
EDIT: Sorry, beaten by Bengt (again)!
Message was edited by: John Cogdell

H264 freeze at the end

Hello,
I am currently in charge produced a web interface in Flex to
view live video.
The video stream from is divided into 3 seconds video and
transcoded in H264 before to be read by my player.
But I just see on a video H264 there is a little freeze on
the video about 1 second before the end. This problem is quite
annoying because it generates a gradual shift in relation to live.
The freeze is really small but sufficient to generate a gap
on live
Thx for your help

Noone

Adobe Media Encoder CS4 - Missing audio at the end of clips?

I'm running AME CS4 in conjunction with a Matrox H.264 accelerator card for MP4 encoding. Source material is .m2t and output is 720p as per YouTube spec.
I've been noticing recently that every other encoding job will chop a second or two of the audio from the end of the clip. ie. The audio will be fine until the last second or two of the clip, which is completely missing.
I'm lost when trying to figure out where to start troubleshooting. On a side note, I have noticed the same behaviour when transcoding .m2t files within Encore, which was part of the production bundle.
Any ideas? Thanks in advance!

I cannot guarantee that it is not a software issue. Sometimes Matrox is an easy "target." However, with several other Matrox users having similar issues, it does seem that Matrox might be the common element.
One of the issues with troubleshooting Matrox issues with PrPro is that few of the normal responders here have Matrox. Many tried the cards, and most unplugged them for various reasons. Some, like me, have never used them. That kind of limits the responses here, unless a Matrox-user, who has addressed such issues successfully, drops by with some tips.
Good luck, and please update the thread, especially if you do get a "fix." Others will benefit, and I will learn something new!
Hunt

Videos Freezes but the sound still continues.

Hi all, I don't know what my problem is, I've uninstalled and reinstalled many times, I"ve deleted all history and cookies, it affects all browsers. I need help.
My problem is that the screen would freeze but the sound and the indicator on the bottom would still, but only for a few second, then everything is frozen.
I either have to move my mouse arrow over it to get it to move again or wait for the little window that says flash player plugin has failed and then refresh.
I use a small window and have it overlap a small edge of the video keeps it from freezing, don't know why.
I"m at a stump here.

I am facing the similar issue does apple has any fix for this for iPhone 5 user, the biggest issue is that my iPhone 5 lags which has never happened it's similar to that of android, can Apple give iPhone5 user the option to get back to iOS7 or Fix this so called LAG issue ?

Last software update of OS X Lion: the system freezes before the end.

I was doing the last update of OS X Lion on a MacBook Pro (10.7.3). Before the end of the process, the system freezed. The only solution was the off button of the desktop. But after it was impossible to open it again. I had to restore OS X from the Time Machine backup. Can you help me? What is the problem? What do I have to do?

Just fixed this myself.
SWUPD is expecting a directory within the one you chose, called "html".
Example: /Volumes/XSAN/SWUPD/html
It will not create "html" if the directory doesn't exist.
Create the folder "html" then in terminal do this:
sudo chown -R _softwareupdate:_softwareupdate /path/to/the/folder
Example: sudo chown -R _softwareupdate:_softwareupate /Volumes/XSAN/SWUPD
##do not include/html. the -R means recursive and forces the same ownership on all contained directories.

Videos freezing but the sound still goes on?

Any video except Youtube videos freezes/stops moving the frames as it's paused at some random point but the sound and the timer/slider/scrubbing tool/bar still goes on with the sound.
Please help!
It happens at random times, random sites and browsers. Also it happens in random places in videos too. Usually at the very first seconds though.
1-) I have tried different browsers,
2-) Tried other sites,
3-) Other resolutions and varietys of videos,
4-) Flash Player (Puffin and Photon),
5-) Resetting my internet settings,
6-) Power off and on my ipad,
7-) Googling this problem.
Steps of the problem:
1-) Can watch the first seconds/minutes perfectly.
2-) When I try to slide forward it automatically stops/freezes the visual/frames but the sound and the time still goes on.
3-) It happens when I don't slide forward too.

Hi,
Is it a Plug-n-Play or Plug-n-Pray headphones ? Have you installed its driver ? Can you see it in Device Manager ? If Yes and Yes you have to disable the internal speaker and enable the headphones using the speaker icon at the bottom right (Playback devices).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TestStand execution freeze at the end on Win XP

Hello,
I have a problem with TestStandv3.0, when logged in as a operator. TestStand freeze execution at the end of the test. When run step by step, I observed the execution freeze after "TestReport Callback" exactly after the execution of the "Clear Generating Report Msg" in the cleanup of TestReport Callback.
Surprisingly the problem didn't appeared, when logged-in with administrator previlages. I have another machine running same software, but with WIN2000 and same previlages no problem. Current previlages that I had for operator usr is power user, little bit down the administrator. I have also tried fulla cces to NI folder in program files, but in vain.
Has any body faced the same problem or know any solution to this problem
Thanks
Mama007...

I have tried to look more into what is causing the problem. It's not a particular stepthats causing the problem. Its the TestReport sequence causing the trouble. I just step through when test failed and unitll execution enters TestReport sequence. Then I pointed out to END with out executiing single step/cleanup. The execution freeze when it tried to enter the main sequence back. So is it some thing to do with parameters information causing trouble???
Any ideas...
Thanks
Mama007

Video freezes at the end of clips.

Similar Messages

Maybe you are looking for