Video from "camera" stopped working all of a sudden

Using my ADVC-100, i'm importing old videos using a Toshiba VCR. I've successfully imported 20-some videos, and even used the nice new feature to upload a bunch of them to my YouTube account without a single issue.
Then today....suddenly, I cannot get iMovie 08 to import the video. I've tried everything. What it does now is, when I hit "Import", watch the video until I'm ready to stop it, hit "Stop", it just goes back to "Stop" or "Import". It does not go the the "Generating thumbnails"...it simply stops and does nothing.
I tried then switching to importing from the iSight, and it worked fine.
What baffles me is that I did absolutely nothing since the last several video tapes that I imported.
Does anyone have any idea what possibly could be going on? I've rebooted the program several times to no avail.
Thanks in advance...

One thing I noticed is that when I click "Import" it says in the upper left hand corner "Ready to Import" even though the counter is counting and it says "REC" and the red light is on.
There is one thing that I did do since the last import. Since iMovie 08 has no "slow motion" effects, I downloaded iMovie HD and used that to build a project.
I quit out of HD before re-launching 08.
Now I did try just now to import the video using HD, but that did not work at all.
I'm still confused as to why all week I've been importing video after video, and now it arbitrarily stops working.
Any and all help appreciated...

Similar Messages

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

During app load, Premiere elements 11 stopped working all of a sudden. Why?

Premiere elements 11 stopped working all of a sudden. Says "A problem caused the program to stop working correctly" I re-installed it but still the same.
I haven't installed any other apps except adobe reader and there were a few Windows updates but that was it. Some history - I had defraged my hard drive when this started to happen. Wouldn't the re-install have fixed it if the de-frag caused this problem? What is causing elements to stop loading at the splash screen?

DFMA
Thanks for the follow up with the very helpful information.
If this is one of those Importer QuickTime type issues, the answers are few if any.
If you have not already tried
Have you attempted to delete the Adobe Premiere Elements Prefs file and, if necessary,
the whole 11.0 Folder in which it exists.
then, please try the following...
My expectations for the following are not high, but worth the time -
1 uninstall the usual Control Panel way - you might want to uninstall QuickTime at the same time.
2. free ccleaner run through (regular and registry parts)
CCleaner - Download
3. reinstall QuickTime and then Premiere Elements with anti-virus and firewall(s) disabled.
Others on the list...
1. Create a new User Account with Administrative Privileges and install and run Premiere Elements
from there.
2. Use a new set of installation files either from Adobe if you purchased the program from it as an online
download, or get tryout installation files for 11 into which you can insert your purchased serial number.
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
If the latter, read and carry out carefully the Note: Very Important Instructions in order to avoid an Access
Denied message.
We will be watching for your progress.
Thanks.
ATR

Speakers stopped working all of a sudden in my laptop HP pavilion g6 (windows 8)

Its been a year i bought lapi. i hardly used it.. My laptop speakers stopped working all of a sudden. I think its coz i upgraded my os from windows 8 to 8.1 (automatically). Even though i upgraded it still askes for upgradation every time i switch on the laptop..
Can anyone suggest me the issue..??
Thanks in advance for solution..

Hello San123,
Welcome to the HP Forums!
I will definitely assist you with the computer's issue regarding lack of sound from the speakers. Before anything else is done, please make sure you try every step in this thread: Troubleshooting Guide: Audio does not Work after a Certain Period of Time
If every step does not help, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
5. What steps have been attempted from my first post on this thread, and what were the results?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Either way, let me know what happens. Thanks!
Mario
I worked on behalf of HP.

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives.

My i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on

my i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on..please suggest what to do??

Hi PriankaB,
Thanks for using Apple Support Communities. This article has steps you can try if your iPhone won't turn on that may help:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
- Ari

Why does my 9810's auto rotate stop working all of a sudden?

My 9810's PIN is: 2978D267
As said in title, the auto-rotate has ceased to work all of a sudden. I've tried removing the battery several times for total reboot and no luck, also tried drawing the keyboard back and forth and no dice. the other anomaly being the inability of recharging its battery with either 1A or 1.5A, wall socket dependant.
I am on the sixth month of use, the place I purchased this handset from is no longer exists so I have no idea how the promised 2 years warranty is supposed to be.
I hope that I can get some clue from here. Thanks.
regardless of race, religion, social status, material, what not

Let's make sure we're on the same page. When you remove your battery, is your phone turned on? Yes = proper battery pull, no = nothing will happen.
If your phone is turned ON, then it's time for an OS reload using BlackBerry Desktop Software.
Try that and post back with your results.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Bridge 'get photos from camera' stopped working and Bridge won't recognize my DNG files anymore

So, I've got Bridge set up to get pictures from mem.card whenever I insert one in my laptop (win. 8.1). A week ago I installed Sony's PlayMemories. Without asking me it hijacked Bridge's task of getting pictures from my cards. What's worse, I tried to fire the 'get photos from camera' function manually from Bridge. Bridge starts working, but nothing happens. I uninstalled PlayMemories and reset Bridge, also told my laptop to run Bridge whenever I insert a card. Still nothing happens and I still can't get the 'get photos' function to run manually from Bridge. Anyway, I can still rund the DNG converter to get my pictures, but today Bridge won't recognize my DNG files - worked fine yesterday. I downloaded CS6 from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the installer, but it doesn't seem to do anything. Maybe I need to do a full uninstall off CS6 for it to do anything..? Anyway, if any of you guys could help me with my Bridge/CS6 issues I'd be grateful. I've got 3 sets of concert photos and a snowboard comp. shoot I need to finish this week
CS6 running on windows 8.1

Re-install of PS CS6 resulted in the following errors:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{C41A769E-27ED-44F7-8A11-F2E32F538E05}\_249_92e651345849 4a10e8de711f4c5be8e5" to "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Proximity\11.00\araphon.env" Error 1392 The file or directory is corrupted and unreadable.(Seq 251)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 251)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
This doesn't really tell me much, anybody else got a clue what this is...?

Importing from camera stopped working after battery dying.

I was importing video from a Samsung Dualview digital camera yesterday and while importing, my Macbook died because my battery ***** (exactly 999 recharge cycles)
When i got it charged back up i tried to import again.
The camera wont even show up in iMovie now. it shows up in iPhoto and Finder but iPhoto wont import MP4 files.
I tried importing to iMovie using the finder option but the MP4 files are grayed out.
Anyone know any possible fixes?
maybe resetting iMovie preferences?

I cleared the iMovie Cache. Problem solved.

WiFi Issues - Stops working all of a sudden - Ipod 4 32G

I wanted the community to be aware of an issue that hit me all of a sudden - my wifi connection on my iPod cease to stop working.
I have a iPod Touch 4, 32G, Windows 7 w/Netgear DSL modem & Router
Today, I was surfing the net with my iPod when all of a sudden I was disconnected. I tried to connect to back but was having problems. As time went by and nothing was happening, I was getting a little worried. My Wii, internet, my wife's iPhone and my 1st &2nd Gen iPods touch's were all connected and working normally but mine was not. I did absolutely everything possible. I went to the user forums and surfed all over to find a solution. In my research, I found that I wasn't the only one that was having this same issue. The only problem was there was no consensus on a solution.
After resetting, deleting, downloading and just about everything else you could do with an iPod, I decided to see if it was my router. I went into my router and set up a "guest" account and all of a sudden my iPod 4 could connect. I then reset my router and it is now working perfectly.
A lot of pain and trouble but the solution was just to reset the modem (in my case, I unplugged it).
This seems to be a strange issue with the iPod 4 as I am not the only one who has been hit with this issue. It has not affected any of my other apple devices except my iPod 4. There is something in how the iPod 4 and the router communicate and the easiest way is to restart your router (all other options did nothing for me)
Hopefully this will help someone out and prevent them from going through all the pain I did.

Hi, this seems like a very annoying problem. Unfortunatly, the community will need some more information to help assist you with this problem. Such as:
1) What programs? Are they resource intensive? I mean, if you are trying to run 4 video games or programs like photoshop and 3dsmax forget about it. And if you have 4 programs ALL attempting to write large amounts to the disk it will yeild a similar result. Usually large amounts of I/O are murder on PC's (by which I mean personal computers...), and of course if you don't have enough RAM its a moot point.
2) What are your specs? How much RAM do you have? What is the size of your virtual memory (page file)?
3) Have you cleared the various caches mac's have? I can't direct you to any good third party programs for mac's but I am sure there is a simple cache cleaner within your system.

Desktop Software Stopped working all of the sudden..

All of the sudden I got a windows message saying "Blackberry Desktop Software has stopped working" (A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.) I un-installed and re-installed the program and the same thing continues to happen. I have no idea what's going on. Has this ever happened to anyone else? Can someone help me out?

It happens to me too just now. I just had my laptop upgraded. before, i have it installed successfully without any problems encountered. in fact I was able to use it early yesterday before i upgraded my laptop. just now, when im trying to install the pc software, while installig it, it just gives a notification that it stopped. but later will show that i have successfully installed. but once you click to open the icon, it shows "Blackberry Desktop Software has stopped working". same with you i uninstall reinstall for 4x now, but still it isnt working.I even though it might be with my net connection, but it is not. I hope someone could help us.

I can no longer connect to the internet on my laptop using my personal hotspot. Stopped working all of a sudden. Any tips as to why?

I used to always use my personal hotspot and connect to the internet on my laptop. Then one day it stopped working. I updated my phone so my hotspot password changed, so I changed that in the properties. It now says it's connected to my iPhone and there's internet access, but when I try to do anything it says not connected.

It shows a connection. When using wifi n USB. I don't know how to connect using Bluetooth seeing what it says to do is totally different from my computer.
I do have a connection but I can only connect to some sites, I tried YouTube n nfl.com n they both worked but google, hotmail n Facebook said couldn't connect.
I tried using safari on my computer n like explorer I could only connect to a few different websites.

HT1338 I have a mac mini with an intel i7 quad processor running on Mac OS 10.9. My audio output stopped working all of a sudden, even though the volume is on maximum and un-muted. How do Iget it to start working?

I just purchased a mac mini with an intel i7 quad processor running on mac OS 10.9.
While listening to a music video on You Tube the audio stopped working.
How do I get it to work?

See: https://discussions.apple.com/message/25486455#25486455

Internet stopped working all of the sudden

I have a WRT54G router connected to my iMac and Mac Book, everything was working fine for the past three months, and all of the sudden no Internet either wirelessly or from a port.
If I connect my PC directly to the modem I can connect to the Internet. The Internet and port lights are turned on on the router. I can login to the router, but when I check the IP address it just shows 0.0.0.0, tried doing a DHCP release\ renew on the router, but nothing. Also, cannot ping any sites from the router.
These are the toubleshooting steps I've taken to try to fix the problem:
Restarted both the modem and the router.
Tried using a different ethernet cable from the modem to the router.
Reset the router.
Upgraded to latest firmware.
I have Comcast cable as my ISP. Has anyone seen this before? Thought I'd get some feedback before I call support.
Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

CTRL + Z stops working all of a sudden???????????

like it says in the title, after a while (usually 5-20 minutes of working in PS CS4 registered version) CTRL + Z keyboard shortcut stops working (instead of doing the usual UNDO it changes image to CMYK mode) as well as ALL OTHER KEYBOARD SHORTCUTS (for example bracket keys [ and ] dont increase/decrease brush size, they just dont do anything).
All of this happens randomly, but never since the beggining of work, always somewhere after 5-20 minutes, probably after a certain operation in Photoshop, applying some filter effects or similar.
Does anyone else have this problem?
Any help is appreciated!

I do not recall ever having read of this problem, and have never experienced it myself.
Hot-keys can be touchy subjects, as many different programs map them differently. However, that said, Ctrl-Z has been a very common hot-key with Windows and Windows programs for some time now. I would find it highly unlikely that any Windows program nowadays would map it to anything else. Still, some programs are rather rogue, so it would not be impossible to imagine that something is re-mapping the key-combo, and maybe sometimes after you have started PS.
What I would also look into would be your memory/resources, and maybe their being filled up. PS offers the ability to Purge Memory. I'd try that, and see if things get back to normal. Obviously, you will lose that last Redo, in the process, but you should then be able to check things out, with the next Redo.
Good luck, and hope that someone has a real cure for this - just because I know nothing of this behavior doesn't mean that there isn't some Bug, lurking just below the surface, and I missed it.
Hunt

Video from "camera" stopped working all of a sudden

Similar Messages

Maybe you are looking for