Video from .ts files (created with Arcsoft Showbiz) played in accelerated.

Hello everybody, can you explain me why in PREMIERE PRO CS6, the video from .ts files (created with Arcsoft Showbiz) is played in accelerated while the sound is played normally ?
If it is normal, an update would be great
Thank you.

>imported from vhs (with Hauppage Colossu).
As far as I know, the best way to digitize vhs tapes is with a http://www.grassvalley.com/products/converters product
Model 55 is one way from tape to computer, model 110 allows exporting back to tape
Files are DV AVI which edit very well in all versions of Premiere

Similar Messages

No audio track from .mts file created with panasonic camcorder

I am running windows 7 and adobe premiere 6. I have a few .mts files recorded using a panasonic hmc camcorder. These videos played fine with sound on the computer. But once they are imported into premiere, there is no audio, in fact the track is missing. Does premiere not support .mts files? Is there a way to convert them into a format supported by premiere?

Is the audio recorded as multi-channel? Is it PCM or Dolby? Try importing clips from the camera that have stereo audio. If it turns out that multi-channel audio is the problem, load the clip into Audition (if you have it) and process it there. If you don't have Audition you could try the open-source program Audacity, but I don't know how well or even if it supports multi-channel audio.
Jeff

Can't open DNG files created with Mac CS5 downloader in Mac CS4 Photoshop

I recently installed CS5 on my mac but I kept CS4 installed as well. I notice that I cannot open DNG files created with CS5 in Photoshop CS4. Bridge CS4 shows the files only as icons - no image thumbnails. I am able to open these same files on a Windows version of CS4. Is there some plugin for my mac CS4 that will enable me to access the DNG files created with CS5? Is there a way to use my CS5 downloader when converting my raw files from my camera to DNG files that will make them compatiple with PS and Bridge CS4?

rr3rd wrote:
Is there a way to use my CS5 downloader when converting my raw files from my camera to DNG files that will make them compatiple with PS and Bridge CS4?
Well, yes...but you'll need to modify your DNG Converter prefs to allow for that. You''ll need a recent (ideally current DNG Converter 6.4.1 or above) and click on the DNG Converter preferences and select the correct DNG Converter options. Check DNG Converter 6.4.1 (the current version) and click on "Change Preferences" to be sure select Camera Raw 5.4 and later then make sure CS4 is updated to ACR 5.7 (which is the last version of ACR for CS4) However, the changes made to ACR 6.x really should be adopted since IQ for ACR 6.4.x is a lot better...

DNG files created with LR4 do not show thumbnails

Hi,
When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer. I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown. It seems, however, that the thumbnails do not show for DNG's created with LR4.
To Remedy this I uninstalled the CODEC. Downloaded the most recent version and installed it but this did not fix the problem.
I then went to the user forum for the CODEC product and searched for my problem. I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem. I tried this and indeed it did fix it. The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)". This statement surprised me as it is counter to what I understand Adobe created DNG to be. Can I get some input on this comment as if true it is very troubling.
My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
And, my thrid question is this. If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
Thanks -- Dan

Hi David,
You testing does not coincide with mine. I have consistently kept "Use
lossy compression" turned off. With lossy turned off, it seems that using
Fast Data Load prevents the thumbnails from displaying whereas turning off
"Fast Data Load" allows the thumbnail to be shown.
Below is comment from Adobe confirming that they have yet to release the
spec containing "Fast Data Load".
From: Ian Lyons [email protected]
Sent: Tuesday, June 05, 2012 12:29 AM
To: Califdan
Subject: DNG files created with LR4 do not show
thumbnails
Re: DNG files created with LR4 do not show thumbnails
created by Ian Lyons in Photoshop Lightroom - View the full discussion

Importing movie files created with SONY HDR-TG5

Having trouble importing movie files created with this camera. Have had success importing direct from the camera using streamclip, but struggling with old files imported from our PC. These files have these two extensions; .modd and .m2ts

Eric:
Thank you. MPEG Slipstream worked great.
Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
Thanks again
Tim

Hi everybody,please someone help me,i had a 3gs last year and i bought a 4,but itunes doesn't synch videos from photos file and it crashes,every time i try to synch photos it stacks when videos try to synch and crashes,what to do please?

hi everybody,please someone help me,i had a 3gs last year and i bought a 4,but itunes doesn't synch videos from photos file and it crashes,every time i try to synch photos it stacks when videos try to synch and crashes,what to do please?

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

After Effects CS6 connot open files created with CC 12.1 Mac version

After Effects CS6 connot open files created with CC 12.1 Mac version. Is there an update?
I am running Windows 7 Pro and Adobe CS6 Suite with all updates

You are never able to open projects from one version of After Effects in an earlier version. This has always been the case.
You can use the command File > Save As > Save A Copy As CS6 to save a version of the project from After Effects CC (12) that can be opened in After Effects CS6 (11).

Captivate File Created with Trial Will Not Open in Paid for Captivate

I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

File created with Trial version cannot be opened by Captivate 5.5 (Ensure that the file isn't open, the file isn't damaged....etc.)

Hi,
I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

Acknowledgement from receiver file Adapter with out BPM

Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevin

from sap note 821267
6. Acknowledgements
    * Q: Does the File Adapter support acknowledgements?
    * A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
           The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
           On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM

Video from an already created DVD

Is there any way at all to remove video from an already created DVD into Final Cut?

Use MPEG Streamclip from Squared 5 (free software) to convert the media to something like ProRes 422, then import into FCP X.
But you need to download a Quicktime component (easy to do though).
Andy

Nokia 3500 classic - .rms files created with junk ...

I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

it are the settings of the app(i think) so thas what thay are and the junk charecters make it hidden for EVRY SINGLE FILE MANAGER FOR J2ME(cell phone app)
vinayshah wrote:
I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

Is there any simulator to test ipad iphone ipa files created with Adobe Director 12?

Is there any simulator to test ipad iphone *ipa files created with Adobe Director 12?

No. Luckily it is very quick to compile and test on the iPad. I've watched people using Flashbuilder and it seems to be a much more complex process.

Usage limitations on files created with CS6 beta?

My gut tells me that the cs6 beta falls under the cs6 license sections "Non-Serialized Software" and "Evaluation software" which state:
"...for demonstration, evaluation, and training purposes only, and only if any Output Files or other materials produced through such use are used only for internal, non-commercial, and non-production purposes."
Am I correct in assuming that this applies to all files created with the cs6 beta? I don't see this discussed anywhere which makes me wonder. I have made some nice progress on one of my files and now I'm wondering if I have to stop and redo everything in my old version. I don't want to sink much time into the beta if nothing I create is publicly usable.
Official clarification would be appreciated.

It's completely awkward that I haven't realised this so far, usually I export everything to PNG -> resize PNG with ACDSee -> convert to JPEG and then forget about it Thank you for clearing this up!

When Photoshop CS6 is invoked from PSE 11 Organizer why is a new file created with _edited-1 appende

I just converted a large PSE 10 catalog to work with a downloaded trial version of PSE 11. When I brought up the Organizer and clicked on the Editor button I selected Photoshop CS 6. At that point the Organizer created an image stack with a new file on the top of the stack that had a file name that was the original file name with "_edited-1" appended to the end of it. Is there any way to avoid this? For me it is going to create a tedious step to delete the original file and rename the new file after editing. For probably 98% of my editing I will use only the Adobe Camera Raw editor on my imported raw files (Nikon's .nef). ACR puts the editing data in a sidecar .xmp file so there's no need to protect the original file from be mistakenly replaced by an edited version.

That's not a new behaviour : in old versions choosing the external editor did create a copy in a version set.
I don't have CS6, so I can't be specific, but I wonder why you should open CS6 if most of your images can be edited in ACR. For them, you only need to click 'Done' and that saves the edits in the xmp sidecar file. I guess most of the remaining files could be processed in the PSE11 editor and saved in any image format (jpeg, tiff, psd...). Only a minority would have to be processed in CS6***, and in that case, creating a new copy in a version set seems quite reasonable.
Edit:
*** in CS6 or the full ACR version of CS6. In my case, it's very rare that I need the other tabs in ACR.

Video from .ts files (created with Arcsoft Showbiz) played in accelerated.

Similar Messages

Maybe you are looking for