Video frozen, audio not synced

We imported a video from our movie camera. 25 minutes into the movie, the video freezes for 2-3 minutes, but the audio continues. Once the video starts up again, the audio is now 2-3 minutes ahead.... can the frozen video be edited out so the audio will be synced?

Yes, you can do that in the timeline.

Similar Messages

  • Video and Audio not synced on .mov file in final cut, but perfect in QT!

    I recently just captured a miniDV tape onto final cut. I captured it in 23.98fps. After I captured it and opened it up in final cut's sequence, the video and audio was not synced at all. it's way off and even when i try to move the audio around on the timeline and get one voice synced up, about a minute into the video it's off again.
    i tried opening the video in quick time under the captured scratch folder, and when it plays in quick time, it's perfect. there is no sync problem at all. only when i open it in final cut is there a problem.
    does anyone know how to fix this or what is going wrong?!
    HELP ME

    well i mean we recorded it in 24PA, which is what we've been doing for this project of ours. And when we go to capture in final cut we choose the Advanced Pull Down setting. So in the end, our video is in 23.98 fps.
    I just thought I'd mention that just to give more details. idk if it's helpful or not

  • Video and audio not sync when i play all forms of video. from music videos, to tv shows. but they play perfect on my iPod. and tv shows display out of order on iPod, but in correct order on iTunes/computer. I even ran a virus check just to make sure.

    audio and video do not syncronize.  all forms of videos. music videos to tv shows.  what do i need to do the syncronize them again
    they are in sync on iPod, but not on computer.
    another issue that might be from the same cause is, the order of episodes of the tv shows i have downloaded,   they appear in order on computer, but on iPod they show out of order.
    any tips on how to fix this would very much help.
    thank you.

    Welcome to Apple Discussions!
    An old version of iTunes will cause this and mess up the videos on your iPod. Always make sure you always use an up-to-date version of iTunes.
    Make sure all the software on your computer is up to date...
    iTunes
    iPod Updater
    Updating iPod's Software
    You will then need to restore the iPod and then let iTunes update your iPod and put your music, videos, etc. back onto your iPod...
    Restore the iPod
    btabz

  • Video and Audio Not Sync

    When I import the video from my camcorder(JVC GR-HD1U) via firewire the video and the audio do not match. does anyone know how to fix this.

    welcome Delta X to the  board...
    long imports (>15 - 20min) of NTSC content get out of sync, due to some specs trouble (NTSC has 29.95 fps, but audio is an even 48KHz... that "shifts" the audio... known NTSC problem...)
    there's a fix on the web, never tried my own, me PAL country:
    Movie out of sync fix
    I've read reports, to import just smaller segments of your tape (see iM's prefs) could solve the problem too... give that a try...

  • Imported Video and Audio not sync

    Hi. Im new to a mac, and have imported all my old files over, having a problem with some video...
    I imported several videos into iMovie. The first group, some vacation movies, are fine. The next group, which was more movies and much longer, has had problems. About the first half of the video is fine, but the 2nd half will not work properly. originally it would play the audio but no video, just black. now, after remove some other videos from the same area, it will show the picture in the little box on the bottom, or on the top if I put it up into the project, and plays the correct audio, but the video will both up top and in the little box for that section of movie is from one of the earlier clips that was working on its own.
    any ideas how to fix this?

    So I just solved the issue, partially...I was able to use iPhoto to import the movies that were having the problem, so I can view them again. I still cant load them all up in iMovie, it has the same problem.

  • HEP!!!!! The video and the audio not sync after export from Premiere Pro CC 2014

    when i play in premiere it ok but when i export it become not sync whith the audio

    i was do a test with some player ,when i play from all this player it result is not the same:
    KMPlayer :Audio not sync with video
    itune :audio not sync with video and very lag
    QuickTime :Can't play anymore
    Windows Media Player : Very good no lag and the audio perfectly sync with video
    put in Audition CC2014 (Multitrack) :Audio sync with video but very lag
    put in Premiere Pro CC2014 (create new project and put the video in) :very lag but audio was sync
    Nero Kwik Media :Very good no lag and the audio perfectly sync with video

  • Video Podcasts Will Not Sync; Audio Podcasts Do

    I recently upgraded my iPhone 4 to the ios 5. Now when I sync my iPhone to iTunes, my video podcasts will not sync. I have not changed any of my settings, and I noticed "All podcasts" is selected under Podcasts section. Audio podcasts sync fine. All was fine until I did the recent software upgrade. Any ideas? Thanks for your help.

    They are there.  They are now under the "Video" app on the first page of your device.  Seems like a pointless change to me.  It took me a couple of days to find mine, too.

  • Teleconferencing app - Video/Audio not synced

    I have a Flex based application which is using Flash Media Server (FMS) server (version 4.0)  for live video streaming between two users (i.e. a one to one teleconferencing service). This streaming is one-to-one, as defined by business rules, so that no third person can join a teleconference. Either person can start the video stream via a browser-based Flex client and communication gets established once the second user joins. Validation for connecting the streams of the two users is implemented on the FMS server (as server side scripting defined in main.asc).
    Almost every teleconference has video/audio sync issue of anywhere between 2-10 seconds (i.e. the audio and video feeds are not synchronized).
    Question - any suggestions on how this can be corrected, either client or server side?
    Thanks for the ideas...
    Jonathan

    Re: Video/Audio not synced when viewing on computerT I'm using the HD+ mode and it is in synch. After more playing around I noticed that I sometimes experience the stop motion but then it quickly returns. It only happens when I have other programs open. If I close all programs and just have open the video, it works well. Again, this is a limitation of my computer power.
    Try this... Open up the Task Manager and then play a video. See how much of the computers power you are utilizing when the video plays. Look at the processes that are open and close anything you don't need. Most people have too much stuff running in the background on their computers that slows it down. They usually come preloaded from the manufactor that way. I have set up my computer so that nothing runs automatically when you start-up. It makes the computer much faster.
    Also, are you running Vista? Vista is a memory hog. Try messing around with Vista's settings. Vista can limit your computer power. With your computer power, you shouldn't be having such a problem. Maybe switch back to XP.

  • Video ipod does not sync with iTunes

    Had a windows PC problem and reinstalled OS. Reloaded itunes and downloaded new music and films, but video ipod will not sync. The error message I get is "Some of the videos in your itunes library were not copied to this ipod because they cannot be played on this ipod."
    I have already restored and reset ipod, nothing changes. Now ipod does not eject either.
    HELP!!!!!

    Needed to reauthorise computer

  • Video and audio not in sync

    Anybody else experiencing video & audio not in sync since upgrading to Lion? I have a MacBook Pro 15-inch, Early 2011 with
    AMD Radeon HD 6490M 256 MB graphics. I mostly stream You Tube, Netflix, & news videos and occasionally watch movies I have in iTunes or on DVD, and since upgrading, I've seen out of sync video and audio in every one of these situations. Sometimes it starts out OK and then slowly deteriorates. Other times it just starts out that way and stays that way. Happens with all browsers as well as iTunes and DVD Player. Tried a few Google searches but haven't come across any postings reporting this with Lion, so I thought I would try here. Thanks for any confirmations and/or pointers to a solution if there is one.

    Ahh...boom. I have it too. Forgot it was even there. I had it turned off back when running Snow Leopard since it was glitchy. Apparenty, I somehow reenabled it and wasn't even aware it was on since its volume was turned down. After disabling it, all video & audio appears to be in sync.
    boom...the sound you'll hear as I nuke it from my system.
    Thanks efrancis76 for figuring this out. Much appreciated!

  • Video and audio not in sync. Other answers here do not help.

    My audio and video are not in sync in many streams but some are OK.
    I do not have any extensions, add-ons and I am using the default theme. I have disabled hardware acceleration. I am now running in Safe Mode and the problem persists.
    The video and audio sync for the first few minutes and then they work their way futhter and further apart, usually several seconds out of sync. I don't think this particular situation has been covered in the other posts.

    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Video and Audio not in sync after capture

    Hi there,
    This is probably a common problem, I have trawled the site but can't seem to find and explanation for it.
    I'm capturing vide/audio into final cut pro from my SONY DVR. The video i have streaming into the sony DVR is from a small covert video device which records video/audio onto an SD card. SO I'm running that into the DVR and then DVR is outputting that as DV PAL firewire (uncontrollable device).
    I'm capturing the 40 minutes of video as one clip, and when i drag it into the timeline the audio and video are WAY out of sync. Is there a simple reason for why this is happening?
    It's almost as if not capturing it right.
    I hope someone can help,
    Thanks in advance.
    Jamie McIntyre

    It is interesting that you are having this problem. I recently purchased a brand new Mac Pro (a week ago) and I am using Premiere Pro and it is doing the exact same thing. I mean this video and audio is REALLy out of sync. I tried capturing an hour at a time, and 30 minutes at a time. Still, no luck. I was debating on getting Final Cut, but after reading this post I am rethinking not only Final Cut, but using Apple all together. Part of me thinks that it is not a Premiere or Final Cut problem but a Mac OS problem. But hey, what do I know. I only edit for a living.

  • Audio not sync with Video

    I am using a Sony DVMC-DA1 to convert VHS tapes into Final Cut Express. After I finish capturing is says,
    "The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
    I have looked in books and feel that I have tried everything. The audio is still not in sync with the video. I am out of ideas. Does anyone know how to fix this?

    What is the audio settings of your sequence? It has to match that of the video you're importing
    I'm not familiar with the unit you're using to import but basically, if your video is 16 Bit 48K then your sequence, your timeline, as to be the same, say NTSC (or PAL) DV. If the video is being captured at 12 Bit, your sequence should be NTSC (or PAL) 32K.
    Having mismatched audio rates in your timeline will usually lead to out of sync audio

  • Audio not sync with video using photo booth since os moutain lion was installed

    Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?

    I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
    Good luck,
    Clinton

  • Audio Not Syncing with video

    When I go to test my video the audio and video are playing at different playback speeds. I'm trying to
    create a video using Flash that requires events based on the song itself. Any idea how to make the audio and video play at the
    same speed during Timeline playback and testing?

    Syncing sound with animation in Flash is not an easy thing to do. First, understand that there are three ways of playing sound in your movie:
    Placing sound directly in the timeline
    Placing sound in the library and accessing it via ActionScript
    Placing a sound file on the hard drive (locally or on a web server) and accessing it via ActionScript
    Sound that's in the timeline can be synced precisely, but you can't use a sound clip that's very long. It's meant for beeps and such, not for an entire song. But if you use sound like this, set it to Stream for best results.
    Sound in the library has a chance of syncing if you load it as a SoundChannel. Remember to import flash.media.SoundChannel at the beginning of your ActionScript.
    AFAIK, there is no reliable way of syncing an external sound file.

Maybe you are looking for

  • Error message when trying to connect to an FTP address

    I am trying to connect to an FTP address. When I use Finder > Go> Connect to server... and type in the FTP address I want and click on "connect", I get an error message: The operation cannot be completed because one or more required items cannot be f

  • Is there a method or app to quickly switch between staff networks in the same building?

    We have a pretty standard network at my job, we have 5 staff networks, Staff A, Staff B, etc. Obviously some networks work better in different parts of the building, but I find that my macbook air tends to hold onto a weaker network and I have click

  • Spry Horizontal Menu Bar Renders Poorly in IE 8.0

    Hi, I am having a problem with the spry menu bar in Internet Explorer. The submenus render at an offset to the right/lower : Can I get both browsers to render equally like this? Thanks in advance, Russell Smith

  • Built EXE not calling dll

     Hi All, I'm having a problem with a EXE that i've built. I've made a very simple VI to track down the problem, but with no sucess. I've got a set of PCI cards. I've got a top level dll that i make calls to in LV8.5 and there are a bunch of lower lev

  • Handoff continuity work half...5S / MBP 2014

    Hi, I have a MBP retina mid 2014 and an iphone 5S 8.1 Handoff and continuity work half : What works : Forwarding SMS / Imessage Calling from my MBP by my iphone Handoff MBP --> Iphone What doesn't work : Handoff Imessage (any text appear) Handoff Iph