Video Frozen audio works for a few seconds

Hello all heres my problem.
Video frozen on frame navigated too with the track bar.
Audio works for a few seconds after the track bar is used then stops.
Timer on the side dosen't incriment only changes when the track bar is used.
Every time the video is paused and then played again the audio starts from the
same place and stops in the same place again
All videos are downloaded from itunes.
Works fine in Quicktime.
VGA Card: GTX 480 - drivers up to date
Processor: AMD Phenom II - Quadcore
Itunes Version: 10.7.0.21
The whole thing strikes me as a failure of the video to increment the current frame and not a result of the failure in the video prossessing
the short amount of audio is proably just buffered ahead of the video for syncing reasons.
I have no real idea though but it is my best guess.
Thank you in advance for any assistance rendered,
Nargodian.

Hi Thomas,
Ok this does seem to say that the ports are set up and iChat is connecting properly.
iChat also thinks there is enough bandwidth at the start and makes the connection.
Is this to a PC ? Video freezes have been seen here when connecting to faster PCs.
What you describe though sounds more like a PC that has not "Tuned" their cammera or Mic to the AIM Application.
Ralph

Similar Messages

  • Video Chat works for a few seconds... then times out - agian

    OK, this is not a knee-jerk reaction post - I have read through the discussions here, and I still don't see what's wrong.
    2 computers, the one with the issue is a G4MDD with 10.4.2 installed, updated QT, updated 3.0.1 iChat, updated security updates. It is behind a single router, configured to direct traffic on the 16000 series of iChat ports. I am using a sony camcorder through the firewire port.
    The error message is relatively familiar to these boards:
    Audio channel info: local machine using 192.168.1.2:16386, expecting remote machine to send to 68.58.46.244:16386
    Video channel info: local machine using 192.168.1.2:16384, expecting remote machine to send to 68.58.46.244:16384
    Notice however, that the ports match (not strange ports) and the IPs are not double NATed. These seem pretty standard.
    When we chat, the video and audio work for both of us for a relatively random period of time, then the frame freezes, and 10 seconds later it times out - giving an error and shutting down.
    Once it has shut down, the good chatting computer sees the green video icon of the other as greyed out - "this user is already in another chat" until the offending computer restarts iChat.
    "goodness" was determined with apple's test AV accounts. It works fine with one computer, and the problem is replicated with the offending computer.
    Any help would be wonderful.
    68.58.46.244

    Hi Thomas,
    Ok this does seem to say that the ports are set up and iChat is connecting properly.
    iChat also thinks there is enough bandwidth at the start and makes the connection.
    Is this to a PC ? Video freezes have been seen here when connecting to faster PCs.
    What you describe though sounds more like a PC that has not "Tuned" their cammera or Mic to the AIM Application.
    Ralph

  • Video pauses and audio continues for a few seconds

    I searched and was unable to find an answer. When I play a video in any type of player from youtube to VLC, the video starts and then the video pauses, audio continues for about 2 seconds, and then the video picks up where the audio is. It plays normally after the beginning. Any idea what this could be?

    Although I don't have my mouse jumping around, I can see that both YouTube and AVI videos that I play are stuttering during playback. And it's annoying.

  • SB Live! 24Bit Works for a few seconds then st

    my SB li've works for a few seconds then sto
    ps.
    if you mute it, then un mute it, it works for a few seconds and stops again. when it stops working it makes some low clicking sounds with no audio output, has anyone seen this before or have an suggestions, its not the speakers its definitly the soundcard.

    more info:
    i just purchased and installed the card
    i have tried everything in the faqs
    if u play music it goes in and outMessage Edited by noobguy on 07-0-2005 09:42 AM

  • My youtube videos are only running for a few seconds, then stop.  Is this an issue with my macbook?

    My youtube videos are only running for a few seconds, then stop.  Is this an issue with my macbook?

    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        http://get.adobe.com/flashplayer/?PID=7105813 
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • Widgets work for a few seconds then stop!

    Recently all my widgets, default or notepad3 for example simply stop working after a few seconds in use, has anyone else experienced this, i searched all over and found terminal commands, suggestions to putting prefs in trash but i must be doing something wrong becuase the problem returns again and again.
    can anyone advise
    cheers

    My problem is that i use this widget called notepad 3 and i have multiple copies open with tons of info, i have tried putting the prefs on the desktop to see whether or not notpad 3 will return but un fortunately they where all gone so i will have to back up the info then try this, so ill get back to you soon, THANKS AGAIN FOR THE HELP, VERY MUCH APPRECIATED!

  • Theme audio plays for first few seconds of menu before dropped audio

    I created my first iDVD movie, and added a .wav file to the main menu. I also used a theme from iDVD4 (montage). When I preview the movie, however (and after burning, this is also on the final DVD), the theme audio plays very loudly for a few seconds while the main menu is booting up, before kicking over to the added audio. Is there any way to make this themed audio clip (which does not appear anywhere, all the audio wells have my added audio clip) disappear, so that I don't have to hear blindingly loud music for 5 second while the DVD boots up the main menu?

    check out the following link (altho the topic is not yet answered) may help with your sceanrio as well:
    http://discussions.apple.com/thread.jspa?messageID=4504981&#4504981

  • [SOLVED]Eclipse starts, works for a few seconds, and crashes

    Hi
    I have some serious problems with my eclipse and it doesnt matter whether I take the repo eclipse or a stand-alone eclipse. It starts normally, works for 10-30 seconds, and then it just crashes.
    The only thing it tells me is:
    # A fatal error has been detected by the Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0x619eb5a2, pid=20860, tid=3076064960
    # JRE version: 6.0_24-b07
    # Java VM: Java HotSpot(TM) Client VM (19.1-b02 mixed mode linux-x86 )
    # Problematic frame:
    # C [libxul.so+0xc395a2]
    # An error report file with more information is saved as:
    # /home/db/hs_err_pid20860.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    /usr/bin/eclipse: line 4: 20860 Aborted ${ECLIPSE_HOME}/eclipse "$@"
    Here is the report file http://pastebin.com/JJcN1yUF
    Do you have a solution for that one?
    ~kiro
    Last edited by Kirodema (2011-03-28 06:58:57)

    To make it work without having to downgrade see this thread https://bbs.archlinux.org/viewtopic.php?pid=907708

  • Video playback audio cuts off after few second

    Pictures are fine but audio cuts off sometime around 5-10 seconds for the entire duration of the video unless you skip the video further a few seconds where the sound cuts off,audio are back but only for maybe 1 or 2 minutes then if you repeat the same step audio are back but again for only a few minutes,only occurs when not using headphones,but when I am using headphones video and the audio plays fine for the entire duration of the video.It annoys me as I don't usually use earphone.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all videos and resync/redownload
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Video (Camera) stops working after a few seconds (Windows XP)

    On starting a video call on Skype, the person I am connecting with can see me in the video.  I cannot see them - only a still picture.  Then within a few seconds the camera stops working, and a line appears through the camera icon.   Skype suggests that there is another application using the camera - but there is no other program using the camera. The camera remains unusable until I quit Skype and restart it... but once again it will only display my video for 4 or 5 seconds. The camera is a fairly new Logitech HD webcam C525, and the computer is running Windows XP.  Skype reports that it is the latest version of the program. Any help gratefully received! 

    Hi again
    You said you have three buttons on the slide with two of them
    configured for "No action"? Why? What is their purpose if you are
    doing nothing when they are clicked?
    You also said the buttons aren't pausing. If the buttons
    aren't pausing the slide, it is probably simply playing and ending.
    Sounds like you are expecting the slide to pause, so I'm confused
    as to why you removed the pause action from the buttons.
    Cheers... Rick

  • I can't click on Firefox's "file edit view..." bar. It works for a few seconds right after opening Firefox, then stops. I have a mac, and can't think of anything I did that could have caused this.

    Other programs work fine while Firefox is open, but when I go back to the Firefox window, the problem starts again. I click on the "fiel edit view" buttons, but nothing at all happens. It's been like this for a few days.

    Try to remove the Firefox plist file (org.mozilla.firefox.plist).
    * http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).
    Try to repair the disk permissions:
    * http://thexlab.com/faqs/repairprocess.html

  • Speakers are only working for a few seconds at a time

    Hi,
    My hard drive crashed had it replaced by apple.  They did that and put the lion operating system on it....... now i have speakers that work for only a few minutes or sometimes not at all.... when I go into settings it is telling me that i have no outputs to select.... i am not overly computer savoy any help is appreciated.
    thanks

    If this MB was just recently serviced by Apple, I would take it right back and make them aware. Also, read this Apple troubleshooting article: http://support.apple.com/kb/TS1574

  • Iphone stops working for a few seconds then starts working again

    ok so i have an Iphone 3gs. the digitizer was messed up so i switched it from another iphone i have. they are both 3gs. after a while my 3gs started to lagg completely. the screen freezes and i cant do anything for a couple seconds then it starts working fine again. this has started to happen a lot. when im playing music it suddenly stops playing for a couple seconds and continues. i tried rebooting it and it didnt work. could it be the software? or the hardware? i doubt that it could be the changing of the lcd screen since the iphone completely stops working. should i try a restore?

    have you done a reset, hold down the home/poer button together until you see the apple logo and then release, then wait for the phone to boot back up.   see if that helps.

  • When I switch between "normal" and fullscreen in a youtube video, the video and audio stops for a half second. Any solution?

    It is only present in firefox. Did reinstall whole windows 7 also, still have the problem :(

    Hello,
    This could be related to the graphics card taking some time to display the flash video. Can you please check and confirm if you are seeing this issue when you use the HTML5 player of YouTube. To do that, you can do the following
    #visit the [http://www.youtube.com/html5 HTML5 page of YouTube]
    #Select the 'Request HTML5 Player' option
    #Try viewing the video and see if the issue is happening
    #You can switch back to the flash based player by revisiting the page and selecting 'Use the default player'
    Please try that and let us know if the issue is recurring or not.
    Thank you

  • Macbook Air only connects to the internet for a few seconds at a time.

    My 2013 Macbook Air (10.8.5) will only connect to the internet for a few seconds. It recognizes the wifi, but will just timeout when trying to access a website. If I turn Wifi off and then back on, it will work for another few seconds, only for the same issue to come up. I've tried EVERY SINGLE troubleshooting tip I could find and nothing works. I've renewed DCHP, rebooted my Mac, rebooted the router, network diagnostics, everything. I've scanned with Sophos multiple times and nothing has been detected. My 2007 MacBook Pro works just fine on the network as well as my roommates Macbook and my Apple TV. I have no clue how to fix it and am praying someone knows what to do. Please help!

    Start by getting rid of "Sophos," which is worse than useless.
    Remove the Sophos product by following the instructions on this page, and also this one, if applicable. If you have a different version, the procedure may be different.
    Back up all data before making any changes.

Maybe you are looking for

  • HP8000 elite SFF; what CPU upgrades are available

    I've just bought an HP 8000 Elite SFF desktop (WB717ET#ABU) with a Pentium DualCore E5400 CPU running at 2.7GHz. I was wondering what CPUs the Motherboard (Rev 0C by the looks of it) could accept in order to squeeze more performance out of it (and ho

  • Cost questions

    Dear SDN ! I am a newbie learning how to support CO in R/3. I hope you can help me. 1. Cost Element vs WBS element vs Internal Orders. My understanding is Cost element is a  GL account, WBS element is related to a project and Internal orders is also

  • BAPI for automatic clearing (similar to F.13)

    Hi ABAP Gurus, I need to create a  new program that should be able to clear by comparing the ASSIGNMENT filed of the payment document (DZ) against the REFERENCE field of the installment invoice (II).  With this, do you know a BAPI that I can use for

  • IPhoto 11 will not show photos unless importing new ones

    iphoto 11 has been working absolutely perfectly for me until tonight. it might have been when emptying my trash but when i open it, it shows everything but does not show the pictures. I have screen captures to show you what I'm talking about.

  • I got my first Mac and will need microsoft office to migrate from my PCmi

    I got my first Mac last night and I will need Microsoft Office to work and to migrate the docs from my old sony Vaio PC with  Windows 7, where can