Video gets SOFT after using export/ media/match sequence settings

Never had this on any other version of PP. PC based 64bit Win 7
EX: I get a job delivered to me that was shot on mini dv (now on a HD) & the clips are all seperated as they were shot.
I put them on the TL & want to make 1 long clip out of them.
I export-media-match sequence settings & the video gets 25% softer. Yes my sequence settings are correct.
I have tryed using "max render quality" button but made no difference.
Does cs5 have a problem in this area? The video looks terrible!
Please advise

Just drag your footage to the New Item button and will create a sequence that matches your footage.
There isnt a preset for that size but you can use the Desktop setting and create one that way too.
GLenn

Similar Messages

Export to Match Sequence Settings

I am using Premiere CS5 and I want to export a video clip in the same format as the original footage (Canon XF MPEG 2) at 100% quality (having edited it obviously).
So I go to >File >Export >Media and check the box 'Match Sequence Settings'.
How do I change the default 50% to 100%? (I've checked the original Sequence Settings and there doesn't appear to be a 50% or 100% option).
Many thanks.
TBC

Hi TBC,
I think you're on the wrong track with the export. Camera codecs are for acquisition. There are many different options for Export, and they do not need to be, nor should they be in most cases, the same thing you started with. The general consensus I see on these forums is to avoid "Match Sequence Settings" most of the time.
Please let us know the destination, and we can then suggest options. For instance, if you simply want to create a "Master" copy of the completed work, on a Mac you might want ProRes, while on the PC you could look at the Lagarith Lossless codec, or the Avid DNxHDcodec (both need to be installed to use them). If going to the web, there's a ton of options, but a YouTube or Vimeo preset is a good place to start, found under "H.264" format.
Thanks
Jeff Pulera
Safe Harbor Computers

Batch Export with Match Sequence Settings

How can I select a bunch of sequences in Premiere Pro and export them with Media Encoder as "Match Sequence" Settings? When I have multiple selections that option is not available. Also, is there an option to either use or ignore the in/out when batching sequences?

Hi TBC,
I think you're on the wrong track with the export. Camera codecs are for acquisition. There are many different options for Export, and they do not need to be, nor should they be in most cases, the same thing you started with. The general consensus I see on these forums is to avoid "Match Sequence Settings" most of the time.
Please let us know the destination, and we can then suggest options. For instance, if you simply want to create a "Master" copy of the completed work, on a Mac you might want ProRes, while on the PC you could look at the Lagarith Lossless codec, or the Avid DNxHDcodec (both need to be installed to use them). If going to the web, there's a ton of options, but a YouTube or Vimeo preset is a good place to start, found under "H.264" format.
Thanks
Jeff Pulera
Safe Harbor Computers

"Current" Dimensions on Export not matching Sequence Settings or Clip

I have been trying to export a Sequence using "QuickTime Conversion" with Dimensions set to "Current" but I have a problem. The video clips dimensions are 1920x1080, and the sequence is also set to 1920x1080, as you can see from the screen shots. For some reason, every time I try to export the Sequence with Dimensions set to "Current", it is saying the current dimension is "556x312", see screen shot.
Can anyone tell me why it is doing this??? It is driving me crazy!
One more thing, I was able to export a sequence earlier today that I had NOT sent to Color. The sequence I am now trying to export is one that I sent to Color for some corrections and it is now only letting me export with current dimensions of 56x312 as stated above.
Thanks for your help!
When I Try To Export:
Actual Sequence Settings Showing It Is Set To 1920x1080:
Actual Clip Settings Showing It Is An Actual 1920x1080 File:

I need to do some compression, I need to reduce the file size. I was planning on use h.264. Its the dimensions of the video that I want to match the original/current footage.

Does exporting DV using "Match Sequence Settings"

I am capturing VHS and Hi8 home video using a Canopus ADVC-300 and Premiere Pro CS6. The output is DV, about 14GB/hour. Most of the captures are unattended (have a 4 TB disk, backed up of course, but space is not a big concern right now). I'd like to get everything imported before starting any serious editing, so I capture each tape twice: the first time, the video itself; then I rewind, turn the timestamp indicator overlay on, and capture again with the camera running at 2x speed. That way I can quickly find when a particular segment of a tape was recorded without winding the tape around in the camera, looking for the scene and the time isn't overlaid over the image.
I have two questions:
1) Since the captures are unattended, I need to trim the blue screen off the end of each captured files to save disk space. I'd like to confirm that if I trim a sequence and export with "Match Sequence Settings" set, that Premiere will not re-encode the DV except for the parts that I actually changed (I sometimes use dip to black around damaged segment of tape). Based on the export speed, I don't think it's recompressing and the quality looks the same but I'd like to double-check.
Does Premiere Pro CS6 always mark the timeline with the colored bar if processing is required? The "dip to black" parts get a yellow bar, but the rest has no bar. That would be a clue.
Also, the export dialog has "Use Maximum Render Quality" unchecked by default. I check it -- does it matter?
2) What is the best way to permanently associate a date/time with the captured video? I didn't see any way to bake it into the DV for each segment. I'm using comments in sequence markers, set at the start of each clip, but the sequence markers don't move if I ripple-delete, say 10 seconds of noise in the middle of a track. I can't figure out how to get markers attached to the video track instead of to the sequence. I found some videos that say how to do this, but they don't seem to apply to CS6. I found that if I export the sequence, the markers then do get backed into the DV. But I need them not to move if I ripple-edit. Is that possible?
3) My plan is to add a 3 or 5 second overlay title to the beginning of each segment saying what it is and when it was captured, but only for the final export. Is there a trick that I could use to create a title from a marker? This is not a big deal, but seems like a useful feature.
Sorry if the answer to these questions are obvious -- thanks for your patience.

Thanks for replying. The reason I want to re-export the captured DV is because I capture unattended, and don't know how much video there is on a 2 hour Hi8 tape or VHS tape.
I could find out by fast-forwarding through the tape and stopping, but it's more efficient to just capture the entire tape and then trim the end off the tape and re-export. I'm planning on archiving the raw DV capture, and 1-1/2 hours will fit on a 25GB BluRay disk. Two hours won't.
Thanks for the tip about the project panel. I never scrolled it to the right far enough to see the "description" or "log note" field. Hopefully those notes will wind up in the metadata of the DV .AVI file, but even if it doesn't, I'm planning on archiving the Premiere Pro project file with the DV .AVI file.
The copy/paste from marker to title is what I'm doing now. I just wanted to make sure I wasn't missing something easier.
So... does anyone know if Premiere Pro will pass-through the original DV if I re-export after making minor edits?

PP 5.5 - DNxHD Matched Sequence Settings exports washed out video

Just want to make sure I'm not missing something. We shot on Scarlet, and after color we got back 1920x1080 DNxHD files.
Im concerned because after conforming, I'm using Match Sequence Settings to export from Premiere and my export video is washed out and different than the original.
Here's the original DNxHD video that I got from our colorist. (all i did was change the filename)
https://www.yousendit.com/download/TEhXNU1KTlF6RS9xYk1UQw
This is the file Premiere spit out after using Match Sequence Settings (a little shorter because original clip had handles)
https://www.yousendit.com/download/TEhXNU1KTlE0b0R2WnRVag
Sequence Settings below. It's also worth it to note that even though I'm choosing 1080p 23.976 DNxHD 175 10-bit and clicking okay, whenever I click configure again under "Video Previews", the dropdown list has defaulted back to 1080i 59.94 DNxHD 220 10-bit. weird. 709 vs. RGB is not making a difference for me.
My Export settings, just for good measure. "Use Maximum Render Quality" isn't making a difference for me
Side by Side comparison. You can really see the difference in the hair above her left eye. Original has a bit more contrast.
I can get good looking exports using other codecs and settings, PhotoJPEG works pretty well, but I know in a lot of cases DNxHD is kind of a standard for finishing work, and up until now I've done mostly broadcast and I've never worked with this Avid codec before. This is our first project with this camera so I want to make sure I'm doing the post-color work correctly. Our colorist already kinda boned us by not haing a red rocket and basically forcing me to take this codec. I'm just wondering if there is some color management step or setting that I'm missing. I really need this export to match the original.
Thanks for all your help, hopefull i can learn something here

Have you tried comparing the footage from inside of Premiere? Put each of the before and afters over top of each other in Premiere itself and see if they look different. Honestly I downloaded your test file and played them from inside premiere right side by side and didn't notice the problem that I see occuring in your pictures. However I did notice a bit of aspect change or something. But nothing related to color.Anyways just try placing them in premiere and comparing them both from inside Premiere.
If just simply placing the files inside Premiere doesn't fix the issue to begin with. Then attempt to change your preview file format in premiere to something besides Quicktime.
But honestly in the pics you posted I can see a clear difference however when I pull both of your files from rapidshare into Premiere Pro on my windows machine using the standard mpeg preview codec I see no color differences.
Like Jim said though Quicktime can't be trusted for color accuracy it has several known gamma issues.

Exporting from PPro CC - Exporting using Match Sequence Settings issue with 24 bit audio

I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.

Always skip Match Sequence Settings and set up the export manually.

Music and videos gets corrupted after syncing

I have been having this issue for quite sometime now. It first started when I was using an old laptop to sync my iPod touch 4th gen. Not just syncing, just transferring music and videos. But the videos get corrupted after transferring the file from the laptop to ipod. I thought it was the cable but as soon as used a faster laptop, the videos were transferred without any corruption issues. I reformattd the laptop as it might have some malware or other softwares interrupting the usb transfer but it still gets corrupted. So I thought, the communication between pc and the new ipod system might be too much for an old intel core duo @ 1.6ghz to handle.
Now, I am using a laptop with intel core 2 duo @ 2.0ghz. The corruption issue is now returning. The music can be played but when playing, it seems like it's jumping, stuttering or something. Please note that it can be played but it sounded like a bad interrupted download.
For the old laptop, the videos are usually the ones the gets corrupted. For the new laptop, it happened recently during a massive sync I performed. I wonder if there's a usb buffer thing that gets full.
Anyway, is there a way to prevent this or check which mp3s are corrupted? I have plan to copy all the mp3s using TouchCopy, then compare the mp3s to my source mp3 using BeyondCompare.

You can't copy music from a i device to a Mac computer. Only from a Mac computer to a i device. So you will have to copy over your iTunes library from your old computer to your new Mac.

Why my macbook pro getting hot after using it 10 mins

in these days, i fond my new macbook pro would get hot after using it 10 mins

Hi kifan lin,
If you have concerns about the temperature of your MacBook Pro, you may find the following article helpful:
Mac notebooks: Operating temperature
http://support.apple.com/kb/HT1778
Regards,
- Brenden

I'm confused by Export Settings- Match Sequence Settings

I’ve created three sample sequences that are all NTSC 720x480 16.9, but each has a different Fields setting (Lower, Upper, and No Fields). When Exporting (File->Export->Media), the CS5 manual states the following for the Match Sequence Settings feature:
To automatically export a file from a Premiere Pro sequence with settings that exactly match the settings for that sequence, select Match Sequence Settings in the Export Settings dialog box.
I’m confused what it is doing because when selected, it always sets the Field Type to Lower, even when the sequence is set to Upper or No Fields. However, using a Match Source Attributes Preset, when available, the Field Type will indeed match the sequence’s Fields setting. Also, the Match Sequence Settings wasn’t even available when the sequence was set to Lower Fields.
I did read in one of the forums where it was mentioned that checking the Match Sequence Settings will match the sequence's Preview File settings. If this is true, I don’t see where one can set the Field of Preview Files.
If anyone could shed some light on this issue, I’d be most grateful. Thanks.

I am confused about how to create a project setting as well as Export setting. I have few videos with width 640 & height 360. Frame rate is 29 FPS. In project setting Frame Size i used 640 by 360 & pixel aspect ration is square pixel (1.0) . after i finish with editing i wanna to export in movie so in export setting i click on Match Sequence then render starts with 50% video quality i wanna to make that 100% but option is disable so what to do?
If I don't click on match Sequence then render will come in default size that is 720x480 . In this video quality comes 100%.
I am totally confuse kindly Help in this case.

Exporting multiple sequences from Premiere with Match Sequence Settings...

If I individually select a sequence in Premiere and Export Media I have the option of checking Match Sequence Settings but with multiple sequences selected the option goes away. So I have to individually select the sequence, check the Match Sequence Settings box and add to the queue for every. darn. sequence. All I want is to export multiple sequences to Media Encoder with Match Sequence Settings (or add multiple sequences to the Media Encoder queue, same thing). Am I missing something? This seems like it would be used a lot...

For PC users, of which I am one, the Preview Render codec in the Sequence is usually MPEG so best to avoid it. If you can actually use ProRes, then it's understandable that you'd want to "Match Sequence" if possible.
Check this link - http://www.premiumbeat.com/blog/pro-tip-exporting-a-finished-video-from-premiere-pro/
Thanks
Jeff Pulera
Safe Harbor Computers

How do I export multichannel audio with match sequence settings?

I have a prores file that has 10 channels of audio. I made a sequence with the same audio and video settings (I also tried dragging the video on the new sequence button with the audio import set to adaptive) and then I tried to render a clip out of it by using the match sequence settings. The audio export defaults to stereo and can't be changed. I'm using Premiere CC 7.2.2 on a Mac at the moment.

It's difficult to be helpful when you have an attitude. I read your post, and was offering suggestions for how to achieve what you seem to want to achieve. If you really need to use the Match Sequence Settings - rather than changing the settings to match manually - then clearly you're not going to be able to get multichannel audio. Since this does not seem like a bug, I would suggest submitting a feature request and asking for the Match Sequence Settings to support multichannel audio export.
Adobe - Feature Request/Bug Report Form

"disk full" message? when exporting 60fps sequences with "match sequence settings"?

Hi, I have searched the forums for this subject and found many discussions that went in different directions but no solutions or input from Adobe.
Summarizing,
everything exports well, both directly from PremPro CS6 and from AME (all input files (like 720p or 1080 p .mts AVCHD or .mp4 H264), all sequence settings, all export settings (like H264, 30 fps, 60 fps)
EXCEPT "match sequence settings" for 60 fps 1080p or 720p AVCHD footage, THEN you get the message "Disk full" after 10-20 seconds.
Of course, the disc is not full, there are no applied effects, and it worked well in CS5.5!!
So, Adobe, what can be done about this, no update yet??

Hi, Ann
Thanks for the reply.
My cache files are stored on a secondary (7200rpm) 1 TB disc
So are the preview files, render files and the source files, but there are no render or preview files, I just put the footage on the timeline in a "new sequence from clip" (which was AVCHD 1080p 60fps .mts file) and tried to export without editing.
I tried to export to this disc and also to the C: disc but got the same message:"Error compiling movie. Disc Full".
If I made the sequence 30 fps the "match sequence settings" export worked well.
I can export n H264.mp4 format at 60fps but I would like to just trim the clips in the timeline and save them without much loss for later editing.

Remember Export "Match Sequence Settings" setting?

Hello,
I would have posted this is "Feature Requests" but that currently seems to go to a dead link.
Longtime editor here, new(ish) to Premiere Pro.
My habit is always to set up my sequence to match what my final export specs will be. As a result I pretty much always want the "Match Sequence Settings" in the Export dialogue checked.
It seems that every time I export, Premiere defaults to unchecking this.
It's not really a big deal to have to check it every time, but it one of those little annoying things especially when under the gun if I forget to check it.
It also seems intuitive that software should be able to remember the settings a user frequently uses, rather than the user having to do the remembering. This is the sort of thing computers are good at.
Wondering if we can get a preference to either default this to checked, or default to last used setting? If such exists I have been unable to find it.
Thanks!
Declan

Hi Declan,
Declan Zimmerman wrote:
Hello,
I would have posted this is "Feature Requests" but that currently seems to go to a dead link.
Hmmm. Where were you clicking for feature requests? I'd love to fix that dead link to help others.
Feature requests can be made here: http://www.adobe.com/go/wish
Declan Zimmerman wrote:
My habit is always to set up my sequence to match what my final export specs will be. As a result I pretty much always want the "Match Sequence Settings" in the Export dialogue checked.
It seems that every time I export, Premiere defaults to unchecking this.
Yep, that's a feature request. Sorry it's interrupting your workflow.
Thanks,
Kevin

Match sequence settings, why is it exporting in a different size?

I am a little new to this but I want to export my timeline in 2704x1440. I have footage of varying sizes and when i tried to stabilise some of the larger shots in the timeline I got a warning that I can not do it, the shots would have to match the timeline. This is a real pain. I could't find a work around on line so I'm putting the shots into their own sequence, stabilising them there then trying to export them back into the project. All very well but with it set to "Match sequence settings" it down sizes the export to 1080? Anyone know what I'm doing wrong or a better way round the stabilising problem??

you may have removed files from iTunes but chose to keep them.
if that's the case, you should be able to track the files down using this script:
Music Folder Files Not Added v2.0
This application will list the file paths of the files in your designated "iTunes Media" folder which are not in iTunes' library. Additionally, you can select a different parent folder and its contents will be compared to the iTunes library. Options to Add a selection of found files to iTunes or move them to the Trash.

Video gets SOFT after using export/ media/match sequence settings

Similar Messages

Maybe you are looking for