Video Glitches with 10.5.2 & 10.5.1

I've had a number of video glitches with my 2x867 MDD with the OEM GeForce4 MX (32mb) card, an Apple 15" Studio Display on the ADC port and an LG 22" LCD on the DVI port when using 10.5.2. I have not noticed them booting off the Leopard Update DVD. What I see is flashes of mostly white boxes with green or black edges. The flashes are fewer with 10.5.2 than they were with 10.5.1, but they're not gone.
Also, from time-to-time, the LG monitor will be lost at boot-up. Nothing will display on it, System Profiler says there's only the ADC connected monitor, etc. even though the monitor shows that it's connected to the computer.
Anybody else seeing this?
Ray

Boys n Girls
I am Currently restoring my Power Book after a significant meltdown.
Thanks for posting I too saw the shearing effect but shrugged it off thinking oh well I'll just reboot!
If you are seeing this Buy a fire wire drive NOW and Back-up.
I suspect the Video update changed a low level feature in the power management routines and this resulted in my Power book cooking itself.
I've got a 12mth old Hitachi 7200 PATA drive in my Power Book after the Apple Drive cooked itself soem tim back and I have now got to back-up and restore my whole system. Luckiliy I have plenty of Big fast firewire drives around so I'm imaging the corrupt drive and going to run the Hitachi tool on it via a WINDOZE Thinkpad. Then a combination of clean install of 10.5.x and a migration assisted restore should do it.
I'm really not very happy though! My Time machine image did not restore and the disk repair did not work. I have a corrupted asl.DB ( the log file for Apple System Logs) and the mac won't boot from its internal drive.
I'll post the resolution here as it happens I'm at hour Disaster + 24 so I'm really cranky!
I suggest If you have a G4 Power Book you resist the temptation to install the video update.
Regards

Similar Messages

Possible serious video glitch with games

Last night, I fired up the Quake 4 demo on my new 24-inch iMac. It worked properly the first time around, but when I quit after the second try the video was corrupted and I had to force the system to shut down.
When I restarted, it instantly went to a gray screen with no Apple logo and refused to advance further (I waited to be safe). Restarting again didn't help. It wasn't until I reset the PRAM (Command-Option-P-R for those who need to know) that it started up normally.
Now it could be just that Aspyr needs to update the demo, but my worry is that the Radeon HD 2600's video drivers may be undercooked in Mac OS X and could be prone to corrupting the image in certain circumstances. I'll have to try more games in the future to validate this.
Now if Apple could only do something about the glossy screen... it's vibrant, but it was already high-quality before! I'd have kept matte.

angealexiel wrote:
hi
before i cry, please guys, tell me its a driver problem, not a hardware problem, cos apple took my old imac for 5 month cos they couldnt repair it, and i just received this one two days ago for exchange . so i'm gonna be crazy if this one need repair too.. i never had so much trouble with a brand...
I know what you mean. I feel much the same way. And I really do hope it is merely a driver issue of some kind rather than a hardware problem. If it is hardware, then it is the 3rd new Mac I have bought in a row that has been faulty
I do however suspect that it is software/drivers. Simply because im yet to read a single report from anyone saying that UT2004 does not crash at some point on their new alu iMac.
As i have said in numerous other threads now, I'll hold out for 10.4.11 or some other update of some kind that will hopefully fix it. If it does not fix it, or the update is not forthcoming very soon, then of course I will be complaining to Apple.

MASN2HD Audio & Video Glitching

I am experiencing audio and video glitching, with both dropping out every 15 seconds or so, while watching MASN2HD on channel 501. So far I've only noticed it while MASN2 is on 501 - I can't say whether Fios1 HD is also glitching. MASN2 SD on channel 1 does not have the same problem. I've experienced this on multiple TV sets. I tried powering off the DVR/STB with no change.
I was going to try resetting them through Verizon.com, but it gives me an authentication error whenever I try.

Just a friendly reminder, this is a forum where users help other users. It looks like your issue may require a Verizon representative to review your account details. Please contact our customer service team via live chat or email at: http://www22.verizon.com/content/contactus/

Errors/Glitches with my brand new Equium A200 15I (incl video hardware)

Hi,
I just treated myself to a new laptop last Saturday and have thus only had it for about 3 and a half days so far but I noticed a few small things that I weren't sure were errors/faults or if they were just because its new, such as the fact that sometimes I type things with the keyboard and some of the letters don't appear on screen, which I think is probably more to do with me not typing or pressing heavily enough on the keys rather than anything else, its not happening so much now...the touch pad gets a bit sticky too and it thinks I want to scroll up and down when I want to move the cursor not scroll sometimes but I manage to get it to work, I think most laptops have glitches like this and presumably I could help fix it by calibrating the touch pad(?) I haven't had time to look into that yet though... there are a few other things though and most worryingly just this morning I got a video hardware error message, so now im a fair bit worried/suspicious that there may be a real fault with it and would like to know if this is the case, whether its something I can possibly fix (im no real expert especially with hardware but I can always try downloading and installing updates/fixes and that sort of thing if it'd fix problems).
The main thing which is worrying me most, is that this morning a message suddenly came up on screen, warning me that there had been a video hardware error, yesterday evening, which I clicked on a button I think to load more info. and I took this screen cap of it:-
http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg
I thought it may help to show the actual full message rather than just trying and pasting the info., well ok to be honest I didn't notice it let you copy it to clipboard but oh well (oops lol).
I know there's a topic about a similar error but I didn't want to butt in on that discussion as I presume that should be for that persons error to be discussed, mine may be slightly different I don't know... I followed the instructions given in that discussion and checked the device manager and no hardware faults are showing up there, btw it says in the device manager, under display adapters, that its a Mobile Intel 945GM Express Chipset Family, im sure all the A200 15I laptops have the same card but I thought I'd just clarify that. Incase that wasn't the right thing to check I also checked under 'sound, video and game controllers' (as the error said it was a video hardware error) where it lists the only one as being 'Realtek High Definition Audio' and I checked the properties there, on both under properties it says that the device is working properly, with no signs of any faults...
The thing is, I had read online somewhere that there is some issue with the graphics or video cards. I'd read that they can be glitchy and sometimes break down after the one year. I'd also asked my dad about this and we checked that it was an Intel graphics card that came with this laptop, which it is, and we reckoned that Intel chips should be as reliable as any other brand really... so I didn't think that there should be a problem, though if there is I have until next September to get it fixed before the warranty expires!
What surprises or kind of worries me though, is that the error message was only presented to me this morning. It dates the error as having occured at 19:53pm... I was using it last night and infact I went to have a shower and I put the laptop screen down before I went to shower at around 7:35pm, I presumed that its ok to just close the lid and it would automatically go into hibernate mode or something similar(?) im wondering if that had something to do with it, as I 7:53pm would have been roughly when I came back and lifted the lid/screen up again to use the laptop again... I can only presume, given the time it quotes, thats what caused the fault?
It does give me the option to 'update driver software' and 'scan for hardware change' within the device manager, should I run both or either of those perhaps? is this a common glitch? should I be worried at all etc...
Any help is much appreciated, if more info. is needed then let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics I have an old version of Paint Shop Pro which I installed yesterday morning, it seemed to install fine, thats Paint Shop Pro 7 from Jasc, I also have some converter programs (for vid files, 3GP and stuff), AVG Virus scan, Spybot Search & Destory, DBPowerAmp, FTP Commander, Quicktime and Real Player, fairly basic stuff like that, nothing much else just my old pics and vid files I transferred from my old XP laptop to this one, in my documents... I don't have any high powered or complicated games or anything else like that installed. Also at the time the video hardware error message states, all that was running when I had the lid down (or before I put the lid down) would have been Windows Live Messenger (though im pretty sure I signed out before putting the lid down) and an IE window, im pretty sure thats all, I wasn't working on anything else just checking the 'net...
There are some other things I've noticed too that I thought perhaps I should mention(?), one thing I've noticed it doing is the screen going blank and then coming back very quickly, alot. I've already asked about this a day or so ago as by then I realised that it was only doing that before loading the 'Windows needs your permission to continue' window/message, which apparently its supposed to do and is something to do with the computer switching from displaying the normal desktop to the secure desktop, which I sort of understand lol.
So I believe that isn't anything to worry about but I have noticed over the lastday or so, that the screen seems to do this more, going blank then coming back again, even when that permission message doesn't show up.
For instance this morning when I first put it on and went to check my home page, I clicked on a link at the bottom of the page or wherever to load another page within the website and the screen went blank for a moment before coming back a second later with the requested page. Is this normal too? or a Vista related glitch, or is there a possibility there may be a glitch with the monitor? im guessing it may be more of a Vista thing but I thought I'd ask here just incase, I decided not to pay for any extra insurance/extended warranty as I'm very careful with my items and take good care of them and so I'm being careful to try and spot any faults early on while they may be fixable under the basic warranty and what-not...
Another thing I've noticed is that to start with, when I pressed and held the 'FN' button, a range of black and white icons appeared on screen which told me which F button(s) to use to make certain adjustments, it still does that when I try it now but at other times, it doesn't show the icons, no matter how long I hold the 'FN' button down. That doesn't really matter since I can tell from the symbols on the keys on the keyboard which buttons to press but its just inconsistent, is there a reason why sometimes the row of icons on screen will show up when I press and hold the 'FN' button and other times it won't show at all?
Also sometimes if I move the cursor right to the top of the screen, those icons load as they seem to always be located at the very top of the screen but sometimes this is a problem, if im trying to click on something else and one of those icons comes up instead... im sure you can switch this option off somehow but should I be worried that the icons don't always show when I press and hold the right button(?) just trying to be cautious!
I think this post is long enough and I can't think what else I could possibly add to help, so I'll leave this here. I don't mean to seem too paranoid but thought it best to mention this stuff incase anyone recognises these glitches/errors and can recommend a quick way to fix any problems before they may develop into anything worse... many thanks in advance for any help with any of these issues!!
(mods let me know if im wrong to include so many things in one topic, I kind of did this quickly and I apologise if im breaking any rules I don't mean to, if possible please break this into a few different topics or I can do this, though ill be at work frm 2-9pm today so might not be back and able to check here until Thursday morning (October 4th))

Hi Isla
Your message is really, very, very long. I think its too long to read it twice ;)
. Regarding all your issues on this notebook well. it looks like you have installed many 3rd party programs and applications. In such case its not easy to say if such issues are software or hardware related. But I presume its software.
I checked your screenshot pic but I have never seen such error message. But it looks like something wrong with the graphic card driver. The message says something about Live Kernel Event
A kernel's services are requested by other parts of the operating system like graphic card driver for example.
In such case I would recommend updating the graphic driver. According to you message its a Intel GPU. So you could check the Intel page for the compatible graphic chip driver.
Regarding the FN key issue;
The Toshiba FlashCard utility controls the FN key functionality. I have read in this forum that this application does not run smoothly and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The FlashCard Utility is a part of the Toshiba Value added package.
So finally one more hint:
You should always check for the Vista updates on the Microsoft page. This OS is not perfected and Microsoft releases very often patches and fixes
Hope it could helps a little bit.
If necessary just ask for more info :)
Regards

Help with FCP X exporting video glitch/error..

Please help! No matter what I do this video glitch/error always happens when I watch the video after exporting it, I uploaded a video on youtube just now showing the problem, click the link to watch the glitch,
http://www.youtube.com/watch?v=lLXkfjF_Jso
If anybody can tell me how to fix this I will be forever grateful! thank you!

I have the same issue and would love a fix. In my experimenting I came across a temporary workaround, and subsequently have a similar issue exporting from Motion 5. Still no real solution, but here's what I've seen:
https://discussions.apple.com/message/15647212#15647212

Videos export with purple/green artifacts/splotches/flashes with Media Encoder CC but export fine with Premiere Pro CC?

I use Premiere Pro CC to edit videos, and videos render fine when I export through Premiere Pro, but when I try to use Media Encoder CC, the video exports with weird splotches of green/purple artifacts all throughout. It almost looks like the video is glitching and having a seizure of green and purple. No idea why this happens. Could anybody help me? I use Media Encoder to export bulks of videos at a time through its queue feature, which is why I prefer to use Media Encoder for video exporting.
Please and thanks.
Specs:
Motherboard: MSI® Z87-G45 Gaming [Red on Black color] 2x SLI/CrossFire
Processor: Intel® Core™ i7 4770K 3.5GHz/3.9GHz Turbo 8MB L3 Cache HD 4600
Memory: 16GB Corsair® Vengeance™ DDR3-1600 1.5V (2x8GB)
Graphics and GPGPU Accelerator: AMD R9 295x2
Power Supply: 1300W EVGA
Operating System: Microsoft Windows 7 Home Premium 64-bit

Mitch,
I was hoping that you and others might have some insight as to whether the purple and green artifacts / splotches seen in the attached screenshots (taken from 4 consecutive frames here but occurring through the entirety of the clip) could possibly have resulted from exporting video with ~ Premiere Pro CS5 or 6 ? As seen below, these splotches alternate back and forth between purple and green in every consecutive frame. I was also hoping that someone might know if this is a relatively common type of artifact and how it is caused.

Video Glitch

I just downloaded the new software update for my mac. The software updates were: J2SE 5.0 Release 3 and the Mac OS X Update. I don't know if they have anything to do with my problem, but it never happened before them, just after I downloaded them.
I watched a DVD last night about a few hours after downloading the software update. The DVD would pause for less than a second, as if there were a scratch, but the DVD was in perfect condition. The audio was fine but it was a very quick pause. I thought that the DVD was scratched. This morning, I decided to make sure and put in a DVD. Sure enough, it does the same thing, so it has to be my iMac.
(I put in a different DVD this morning, just to make sure.)
The software updates were: J2SE 5.0 Release 3 and the Mac OS X Update. I don't know if they have anything to do with the video glitch, but it never happened before them, just after I downloaded them.
What should I do? How do I fix this?
(P.S. This only happens in the DVD player, because I watched a trailer online, so obviously it's not any other video.)

Does the slight pause occur around the midpoint (say 1 hour 30) minute point of the DVD? If so, this is normal and common to all DVD players (both your mac, as well as all commercially available dvd players) as the dvd player switches over to play the second layer of a dual layer DVD disc.
Not all DVDs are dual layer discs, so that can explain why some dvds seem fine, while others arent.
The fine print on the back of the dvd box or in the insert usually tells you if the movie is on a dual layer disk, and that such a pause is `normal`.

"Doctor Who: The Classic Series" - Corruption and Audio/Video Glitches

Has anyone else had problems with the "Dr. Who: The Classic Series"?
First off, I am unable to download "Episode 1" of "Carnival of Monsters". I have tried to download on 2 different Macs and one PC, all stop around 90 MB (error 8008).
Secondly, all 4 episodes from "The Claws of Axos" are riddled with audio pops, coupled with simultaneous video glitches. During "Episode 2", it actually throws the audio out of sync for the remainder of the episode.
I highly suspect these files are corrupt at the server side. Just checking to see if anyone else has had similar issues.

Sorry, but there's no way to know. Apple doesn't pre-announce additions (except for limited pre-orders on albums) and there aren't any alerts for specific shows except for season passes which don't really apply to the Dr. Who Classic shows where every full story is a "season".
You'll just have to keep checking back from time to time.
Regards.

Iphone/ipad video glitches after upload thru iphoto/image capture...suggestions??

iphone/ipad video glitches after upload thru iphoto/image capture...suggestions??

If the problem only appears with iPhoto then it may be due to a bad pref file for iPhoto. It could also be caused by a bad cache or log file.
There are additional ImageCapture preference files located in the /Home/Library/Preferences/ByHost/ folder. Be sure to remove them also. Also remove the /Home/Library/Caches/com.apple.iPhoto/ folder.
There are two ImageCapture cache files located in the /Library/Caches/ folder. Drag them to the Trash but do not delete them as yet.
Now restart the computer and see what happens.

Video Glitching- Lines and Patches on Screen

Hello.
This morning my three-year-old iMac G5 began exhibiting video glitches. The glitching occurs at all times, including the gray bootup screen. The display appears to be streaked all over with coloured lines which change colour and pattern when I move windows and objects around on the desktop.
http://www.gossi.co.uk/misc/screenjpg.jpg
An additional strange symptom is that this first occurred when I started up World of Warcraft. Now the above behavior occurs at all times with or without WoW running. 3D graphics in WoW are highly distorted, stretched and blocky.
I am aware of the iMac repair problem, although my serial number does not match up, and my iMac is second generation rather than first.
This seems very unusual, and doesn't seem to match many other graphical problems mentioned on the forums. Has there been any other issues similar to this reported?

To Apple Discussions!
"An additional strange symptom is that this first occurred when I started up World of Warcraft."
Are you playing this game off of a CD/DVD or is it installed onto your HD?
Which OS are you using?
*A couple of things to try prior to visiting your local AASP:*
Max out your RAM. Your system info confirms you only have 1GB.
Boot from your System Install DVD & run the repair disk/permissions option(s). If this works, then I suggest that every time you play WOW, afterwards repair permissions directly from the HD & restart your computer. However, you really should consider maxing out your RAM.
Mac OS X 10.4 Help-My Dispay Doesn’t Look Right
If the above is of no help then you will need to do the following:
System Preferences>Display>Display
Check the Colors & Brightness settings.
My Color setting is set to Millions which I believe is the default setting.
Now click on the Color button.
Check Display Profile
Is Show profiles for this display only enabled or disabled?
If necessary click on the Calibrate button & do the necessary.
Now in the bottom right corner, click on the purple button w/the black ? mark in the middle. This will bring up the help window.
Midway down, click on the Colorsync Utility link.
The next window should be Profile First Aid.
Read & follow the instructions/details of About Profile First Aid: & do the necessary to Verify & Repair.

Screen tearing on video playback with mplayer and radeon driver

I use a old Radeon 9200 video card with the open source radeon driver, and after I configured the radeon driver to fix the screen tearing, it still has screen tearing
this is the xorg.conf:
Section "Device"
Identifier "My Graphics Card"
Driver "radeon"
Option "DRI" "on"
Option "DynamicPM" "on"
Option "ClockGating" "on"
Option "AccelMethod" "EXA"
Option "EXAVSync" "on"
Option "DMAForXv" "on"
Option "ScalerWidth" "2048"
Option "EnablePageFlip" "on"
Option "RenderAccel" "on"
Option "AccelDFS" "on"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AGPFastWrite" "yes"
BusID "PCI:1:0:0"
EndSection
and this is the ~/.mplayer/conf:
vo=xv
ao=alsa
mixer-channel=Master
nolirc=yes
nojoystick=yes
font=Arial
subcp=latin2
subpos=95
and I know that this video card is capable of playback without screen tearing, because if I boot windows xp and open any video file with VLC, there is no screen tearing
Last edited by Chrys349 (2011-10-31 03:03:06)

I have a Radeon 9250. Here is my setup:
Section "Device"
Identifier "Radeon 9250"
Driver "radeon"
Option "EXAVSync" "false"
Option "ColorTiling" "true"
Option "EXAPixmaps" "true"
Option "MigrationHeuristic" "greedy"
Option "SwapBuffersWait" "true"
Option "TripleBuffer" "true"
Option "EnablePageFlip" "true"
Option "AGPMode" "8"
Option "AGPFastWrite" "false"
Option "BusType" "AGP"
Option "DisplayPriority" "AUTO"
Option "IgnoreEDID" "false"
Option "RenderAccel" "true"
Option "AccelMethod" "EXA"
Option "AccelDFS" "true"
Option "FBTexPercent" "0"
Option "DMSForXv" "true"
Option "SubPixelOrder" "NONE"
Option "VGAAccess" "false"
Option "DRI" "true"
Option "XV_VSYNC" "true"
Option "XV_CRTC" "auto"
Option "XV_BICUBIC" "false"
EndSection
I'm glad with the video quality, however, I do experience little tearing sometimes, especially in the scenes involving panning.
The XV_VSYNC option is supposed to eliminate tearing (due to the radeon manual), but it is ignored if KMS is enabled. Try disabling KMS if you don't mind some performance reduction. The Radeon driver generally has some annoying bugs and glitches in KMS mode.

Windows 7 Aero glitching with firefox 29.0.1

Windows 7s aero theme is glitching with firefox only. When I hover over the firefox icon on the taskbar, it doesnt display the firefox windows as the miniatures. if I click on an empty space and THEN hover, it will display the windows available as miniatures. if I click on one of them it flashes for an instant and then minimizes. I cant alt+Tab into any windows that become minimized also. if I click on the firefox icon to select a window it flashes for a split second then goes away and I cant click on anything.
basically the aero functions for firefox arent working. and it only seems to be affecting firefox.
steps taken so far:
system restore to a previous point. this helped for about 5 minutes then it went back to the problem.
closing firefox, restarting it, closing it, restarting computer, opening, closing rinse repeat.
manually selecting the window I need from the task manager and selecting "switch to" works to bring it up but thats the only way ive found to open the windows once theyve been minimized.
also cleared the registry and backed it up but the problem happened before that.
removed/unpinned it from taskbar and repinning it. didnt help.
what else can I try?
specs:
windows 7 x64 ultimate
core i3-2100
24GB Ram
Nvidia GeForce GTX 660 2GB
firefox version: 29.0.1

Firefox has hardware acceleration set to "on" by default, but it's still young, which means some video cards or drivers might have problems with it. You can try to disable hardware acceleration to see if that alleviates your problems.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps for Firefox version 29.0 and above:
*Click the menu button [[Image:New Fx Menu]] and select Options for Windows or Preferences on Mac or Linux. For Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window, click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

Why would an audio track cause a video glitch?

I have a 1080 60p clip with no audio. If I create a sequence based on that clip, add a wav file to an audio track, then export using the H.264 60p custom preset with audio multiplexing to an .m2t everything looks fine.    However, if I export using the H.264 Blu-ray preset, 720p, 59.94, multiplexed, to an .m2t file the video has some stutters towards the end.   If I remove the audio track and do the same export, still muxed, the video is fine in 720p.   I get the same result if I start with a 720p sequence (i.e. addition of audio causes video glitch).
Edit: tried a different audio file, this time .mp3, same problem.
Edit: importing the muxed 60p export with audio, then exporting as noted in 720p has the same issue.
Comments?   Let me know if what I'm describing isn't clear.

Hi Jim - understood in an ideal world one would have source video footage, sequence, and output target all the same. Is it not common though for folks to have situations where there is more than one target output?
Anyway, I think I have a tree covering both roads if I understand your analogy. What is wrong with the following picture? I took the original 1080 60p clip, dragged it into a 720p 59.94 sequence, exported the video only. The exported video looks just fine in this case. I even tried different formats (Matrox MPEG I-Frame HD, H.264 Blu-ray muxed and not). It is all good.
Next I imported the aformentioned no issue video that is in 720 59.94 into a sequence that matches then exported to a matching format.   No issue with the resultant video.   Is this scenario not what you mentioned?   Start with video that matches the sequence and target output?
However, if I add an audio track, the video has some flashing/stuttering at the end particularly towards the top.   Why would exporting with or without an audio track in the above scenario make a difference?
In case it matters, the video came from a modified After Effects template. I don't own AE and paid another guy to modify the template. I will go back and ask him to render in 720p 59.94. Still, the above just doesn't seem right.

Is my flash player broken? Skipping green screen glitch with sounds.

Is my flash player broken?
I'm getting a glitch with almost every video hosting like Youtube, Vimeo, vk.com etc. It's a glitch with green screen and the video starts skipping video in big parts, also making scary sounds, sometimes it starts doing it when the video is playing byitself,
sometimes when i skip on a particluar part. It happens to almost every video. I'm not sure what the issue is, I get it in Mozilla and Chrome. I reinstalled flash player 5 times, cleared cache, deleted browsing hystory, tried everything.
Please help. Here's the video of my issue:
http://www.youtube.com/watch?v=jVJm5ArYOh4

I did that, and worked. I was reading another thread and saw this (disabling hardware acceleration should work), then I restarted, and tried using HA and again green screen and crashing. Now I'm using without HA and so far, so good. I sent a report to AMD, because I'm using latest drivers for Radeons and obviously there is an incompatibility.

Help Needed : Video Glitch after exporting from Premiere Pro CC

Hi all ,
            I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
             However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
             Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
Regards,
Elias Lo

what i did was install final cut pro. I dont have an answer for this but it finish my problem , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about , and i also have your problem big time o pn every export.
i have instal final cut onmy older slower imac and i can see everything and the export are perfect
so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Video Glitches with 10.5.2 & 10.5.1

Similar Messages

Maybe you are looking for