Video hangs after burning on a DVD

Hi,
after burning a project with menus and several chapters, I notice the DVD is hanging after a few chapters. My DVD burner itself should be ok, I got no hardware failures and it's working fine with Nero Burning ROM. Any suggestions??
Tx a lot,
Kristof

You used iTunes to burn the CD? If so, it should work. The question is, did you choose "back up to disc," or did you create a playlist, and choose "Burn playlist to disc?"
If you do it the first way, you are just saving the actual music files (not in CD format) to a CD.
If you create playlist and burn playlist to disc, you are making an actual Audio CD that will play in any CD player.
If you are already using the second method, are you using a CD-R, or CD-RW? Some players have problems w/RW's.
Btw, iTunes songs are not MP3 format, so I don't think you'll be able to find a "converter." LOL

Similar Messages

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

Why don't you ask this question on the iDVD forum?

Sooo frustrating after burning with toast dvd still skips

Cab anyone shed any light ive tried everything and my dvds are sticking on playback!!
Many thanks Tim

Hi Bengt
The camera footage is from a video booth it records in dv-pal.
The dvd was edited in imovie 11
The audio was imported with original clips 48 khz and some music from ilife sound effects
27" imac 3.2 ghz intel core 13 4GB on my macintosh HD I have 879.39 GB available
Exported to idvd via quicktime using these settings
VIDEO:-
compression DV - PAL
Quality - best
Scan mode- interlaced
Aspect ratio 4:3
Dimensions 720x576 ( 768 x 576 )
SOUND:-
Format: integer ( little endian)
sample rate 48.000khz
sample size 16 bit
When using toast 7 i dragged the same movie exported to desktop via quicktime into toast and burnt using toast menues and also I tried making a disk image in idvd and copied that into toast and burnt that too.
I tried the burns on Verbatim - R and Maxell - R
On the burnt dvds both in idvd and toast the place in which the dvd was sticking on playback changed every time it would stick for 1-2 seconds and then play on.
Hope all this is what you asked for bengt do bare in mind i an a beginner when it comes to all things Mac.
I burnt the same clips via my pc in adobe prem ele 7 and the dvd played through fine with no problems
Yours hopefully
Tim

After burning movie onto dvd it won't play on players despite being compatible (-R and -RW) the disc is either not recognised or it only plays audio. Am I missing a stage in finalising the movie onto DVD? The movies is 30mins long.

DvD burned with project from iMovie not playing back on compatible players. Aaaargh!

Hi
There are several things that do this:
- Brand of DVD used
- Type of DVD used
- BURN SPEED
- Material used
- Free space on Start-Up Hard Disk
I use:
Verbatim, SL-DVD-R, x2 max x4 Burn Speed and never less than 25Gb free space on Macintosh HD
Material:
- Video Codec: StreamingDV, AIC or HDV
- Photo file format: .jpg - NEVER .bmp or other - all converted to this
- AUDIO file format: - .aiff 16-bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3 or DIRECT FROM iTUNES ! - all converted to .aiff
Then I've near to Zero problems.
Yours Bengt W

Text roll looks wierd after burned on to DVD

I put credits on text roll and after rendered/compressed and burned onto
DVD studio. It looks wierd. It's not plain white characters.

Hi -
Go to your sequence and click anywhere in the timeline and then type Command + 0 {zero} to see the Sequence Settings. Either report what those sequence settings are or take a screen shot and post the screen shot here.
Also, please click on one of your source clips in the Final Cut Pro Browser to select it, and once selected, type Command + 9 to see the Item Properties for the clip. Either report what the item properties are, or take a screen shot and post the screen shot here.
When you were editing you sequence and seeing the slow motion in FCP, was your Canvas set to display at 100% size? Were you monitioring the sequence on an external monitor?
Thanks
MtD

Part on video missing after burn.

Hi...long story short, I hope. I made a movie in iMovie which has a video clip (from a camcorder) that shows an actual "spark" on film in slow motion. (I want to see the "spark" and I do see the "spark" in iMovie.) However, when I burned the video to DVD and played the DVD, the "spark" was gone. Not only was it gone on the DVD, but I went back into iMovie, and it was also gone there. Have any idea why? May it have anything to do with "Render and Proceed"? -Another question...do you have to "Render" or should you always "Render"? Any help is greatly appreciated.-Kim

Hi Kim
There are two things I NEVER use in iMovie - any version:
• Share/Export to iDVD - from within iMovie. Rendering is in some cases harmful
• Never empty Trash in iMovie (on Desktop is OK) - Just a trouble maker.
To make my DVDs I:
• When done in iMovie - Close it
• Find the movie project icon (With a star on it)
• Open iDVD
• Import (or just drop) the movie project icon (With a star on it)
Now iDVD will do the rendering - and so much better.
THEN: I do a DiskImage (File menu and down)
This I test with Apple DVD-player.
Sparkle still there - OK - two options:
• Burn with iDVD (recalculating) (burn speed can be set in iDVD08 only)
• Burn with Apple Disk Util tool - or Roxio Toast™ if You got this and then
set burn speed down to eg x1 or as low as possibly - DVD will play better.
Yours Bengt W

Video Distortion after burning i.e. "tracing"

Hello all. I have been working on this project for a couple weeks now. I do a lot of "copy and paste" edits where people bring in dvd's and other media and want me to put together a demo disc or something of that sort. This high school student has brought me a bunch of basketball footage I have imported and created a nice dvd. While watching it in FCP and DVDSP the video looks fine. Once I push it to DVD there is a massive amount of distortion, in the form of "tracing" following the basketball players on the court, to the point where it has become nauseating. I have fooled around with my settings in DVDSP and have not been able to fix this.
Any suggestions would be greatly appreciated.
I have my encoding setting set at Two Pass VBR
Bit rate - 7.6
Max Bit Rate 8.9
It is a short video compilation, maybe about 15-20 mins long
Thanks in advance.

nothing quite so dramatic. We can't see it but I'm guessing you're seeing interlacing artifacts. My guess is that the interlacing got out of step somewhere. The easiest thing is just to make your video progressive out of compressor. then the DVD player can deal with it.
How are you getting your video from FCP to DVD SP? The ideal way is to go through compressor. And in there you can switch your rendered output to progressive, that is remove the interlacing. Of course it's a guess from here. I'd do a test of one of the tracks and put it back on the DVD and see what happens. You'll have to make sure you remove the old track from the DVD.

After burning photos to DVD Keywords are lost or mixed up

Hello,
I burned many a photo to DVD last night and today I checked the DVD only to find most of the Keywords I assigned were now non existent except for a large group that should have read "Self Portraits" but now reads "House".
are my keywords gone and scrambled?

Hi Warriorant,
this is a current bug. Hopefully iPhoto 6 will fix this problem.
Are the keywords in the library that iPhoto opens still correct?
Lori

DVD blurry after burning

I am new to Premiere Elements and I have a JVC HD video camera. The video quality after burning seems like the digital is shakey when moving but on PC its good?

I am not really sure the answer to your questions but here is what I did. I uploaded video
to my PC from the video camera and I can view the video in the Adobe Elements however,
after I burn to DVD or view in Premier elements it is grainy and seems to be unstable with
movement. It seems better when I view the video on the DVD on the computer when I make the screen smaller.
The only setting I changed was when it asked while burning the dvd on the quality to fit it to the DVD or better quality and I chose the top quality?

After burned to dvd the edge are cut off in my tv screen. looks like zoomed

hi
i am FCPX user. i create my project using format (resolution )as showed on the pic below
after burned to dvd the edge are cut off on my tv screen. looks like zoomed as showed in the pic below.
thanks for taking ur time to help me!!
then i export using master file as
showed on pic below
and after i burn on to dvd my edge are cut off. here pic trying to show before burn on my mac and after burned on to dvd
before burned on to dvd on my iMac screen
AFTER BURNED ON TO DVD ON MY TV SCREEN
i really need ur help thanks
after burned to dvd the edge are cut off in my tv screen. looks like zoomed

Thanks Alchroma
i used this dvd burner just incase..
but i thought i might have wrong settings from begning.
do u thinik this setting is alright when creating DVD
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
thanks again

My Mac has blocked after burning DVD

Hi there.
My iMac has blocked after burning couple of DVD. It keeps on freezing after restarting. Mouse can't move.
Please help. I have an asignement tomorrow.

MacBook Pro screen goes to freeze condition when iTunes is open, I had to close this app pressing "Comman+Q".

After burning a slide show, I get a skip in audio

After burning a slide show, II get a skip in the audio about every 5 min. of run time. I imported the pictures from i photo and the music from an itunes play list. When I play the entire thing in preview it runs fine with no problems, but after burning to a dvd, I get a skip every 5 min. I burned to hp DVD-R (16x) and Memorex DVD-R (16x). Still the skip. I have burned to Best preformance, High Quality and Professional Quality. I have even slowed the burn time to 4x. Still the skip. I noticed the bar at the bottom of the screen always reads 5 min. for the audio duration and when it goes back to 0 is when it skips. The run time when I put the cursor on the audio well reads the correct 3min:35sec.

SlideShow function in iDVD - is limited to 99 photos per show.
Creating the SlideShow in iMovie HD6 or FinalCut - doesn't limit this but offers 100% control over process (audio and transitions)
Using iMovie'08 or 09 or 11 - will degrade picture quality as they only deliver every second line over to iDVD.
I never use "Share to iDVD" in any iMovie version.
• iMovie up to HD6 - Just close it and import movie project from within iDVD
• iMovie'08 to 11 - "Share to Media Browser" and as Large (not HD) will give as good quality as they can do
Yours Bengt W

Video hanging on iPad 2

When using the xfinity TV or HBO Go app... video hangs after 15 seconds.... audio continues. I am using my Comcast Home Network which speed tests indicate that I am getting 18-22 Mbps download and 4 Mbps upload. When I called Comcast, they had me delete and reload the apps.... but I am still having the problem

I dont know how, but while syncing it change it back my library

Grainy pics in video after burning to dvd

I bought a new computer and now have windows 8. I bought a new premere Elements 11 because my version 9 didn't work. In the past I have done a lot of videos with slide shows and videos on the same dvd. I tryed doing the pictures in organizer and the pics didn't fit. Then when I selected frame fit in video the pictures got very grainy. I then looked into it and it said not to have the frame fit checked so I unchecked it. Then the pictures did not fin in the frame of the video. So then I tryed doing the slide part of the show in Movie maker and save it and re insert it. It looks terrible. I have don't this for years i movie maker and my old elements and the videos with the slide shows looked great once I burned them to a dvd. I don't know where to go to find out how to do this. The slide show looks great on the computer screen but once you burn to a dvd it looks so pixilated and grainy. Help

t us begin.
Given you have Premiere Elements 11 on Windows 8 64 bit.
1. What video, photos, music are going into this project and how do you intend to export your edited content for others to view it....to a file save on your computer hard drive for play back with a computer player or burn to disc DVD, AVCHD, or Blu-ray?
I have several different pictures all jpegs and videos from different cameras all different sizes. I have figured out how to resize thepictures in the CS3 bridge program. I burn them to DVDs for dvd players
We need to know this information so that we can set up the project correctly.
a. What are the pixel dimensions of the photos and how many of them are there? Are these in jpg, .psd, tif, raw, formats.
all different but I did resize them
b. What are your video properties...video and audio compression, frame size, frame rate, aspect ratio 4:3 or 16:9, file extension. If you do not know, you can get that information from a properties readout from the free MediaInfo (tree view)
http://mediaarea.net/en/MediaInfo
this I don't understand and will look at the above link as you suggested
or, if you give me the name of the camera that these videos came from and the setting that you used, I will try to figure out your video properties.
I have cannon camcorder and other videos from friends which I am not sure so I will look at the above link
c. Are you going to use narration, soundtrack in your project.?
yes I add music and some are tracks from audasity that I cut from other videos and some are MP3s and some WMA
Premiere Elements 11 takes over the role of setting the project preset for a project. Sometimes it does it OK, sometimes not. That project preset setting directs the program to set the correct space in the Edit Mode Monitor for your particular video. So, you can see how video properties and project preset settings are so important to setting up the project.
I have issues trying to edit video because it jumps and the sound continues but the video portion stops so that makes it so difficult to try and edit clips
Please indicate if you wish to proceed:
a. Create an Elements Organizer 11 slideshow and transfer it to Premiere Elements 11 for completion
or
b. Use only Premiere Elements 11 workspace to create, edit, and export the project.
Let us start here and expand into a more detailed step by step based on your answers to all of the above.
Along the way, please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR
I am so grateful for your help. Thank you so much

Video hangs after burning on a DVD

Similar Messages

Maybe you are looking for